113758-HMC572LC5

HMC572LC5 v06.0514 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz Typical Applications Features The HMC572LC5 is ideal for: 8 dB Conversion Gain • Point-to-Point and Point-to-Multi-Point Radio Image Rejection: 18 dB • Military Radar, EW & ELINT 2 LO to RF Isolation: 35 dB • Satellite Communications Noise Figure: 3.5 dB Input IP3: +5 dBm 32 Lead 5x5mm SMT Package: 25mm² Functional Diagram General Description The HMC572LC5 is a compact GaAs MMIC I/Q downconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of 8 dB with a noise figure of 3.5 dB and 18 dB of image rejection across the frequency band. The HMC572LC5 utilizes an LNA followed by an image reject mixer which is driven by an active x2 multiplier. The image reject mixer eliminates the need for a filter following the LNA, and removes thermal noise at the image frequency. I and Q mixer outputs are provided and an external 90° hybrid is needed to select the required sideband. The HMC572LC5 is a much smaller alternative to hybrid style image reject mixer downconverter assemblies, and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25 °C, IF = 100 MHz, LO = +4 dBm, Vdd = 3.5 Vdc* Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range, RF 24.5 - 26.5 23 - 28 GHz Frequency Range, LO 9 - 15.5 9 - 15.5 GHz Frequency Range, IF DC - 3.5 DC - 3.5 GHz Conversion Gain (As IRM) 6.0 Noise Figure Image Rejection 8.0 6 3.5 14 17 14 10 dB 3.5 dB 20 dB 1 dB Compression (Input) -6 -4 -7 -5 dBm 2 LO to RF Isolation 32 35 30 35 dB 2 LO to IF Isolation 30 40 25 40 dB IP3 (Input) +5 +8 +3 +6 dBm Amplitude Balance Phase Balance Total Supply Current 0.3 0.4 dB 5 8 Deg 125 165 125 165 mA *Data taken as IRM with external IF Hybrid 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC572LC5 v06.0514 GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz Data Taken As IRM With External IF Hybrid Image Rejection vs. Temperature 30 20 IMAGE REJECTION (dB) CONVERSION GAIN (dB) 15 10 5 +25C +85C -40C 0 -5 25 20 15 +25C +85C -40C 10 5 -10 23 24 25 26 27 28 23 29 24 Conversion Gain vs. LO Drive 26 28 29 0 15 RETURN LOSS (dB) -5 10 5 0 0dBm +2dBm +4dBm +6dBm +8dBm -5 23 24 25 26 -10 -15 RF LO -20 -10 27 28 -25 29 8 10 12 RF FREQUENCY (GHz) 14 16 18 20 22 24 26 28 FREQUENCY (GHz) Input P1dB vs. Temperature Input IP3 vs. LO Drive 0 25 LO = 0 dBm LO = +2 dBm LO = +4 dBm LO = +6 dBm LO = +8 dBm 20 -4 15 -8 -12 IP3 (dBm) P1dB (dBm) 27 Return Loss 20 CONVERSION GAIN (dB) 25 RF FREQUENCY (GHz) RF FREQUENCY (GHz) +25C +85C -40C MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Conversion Gain vs. Temperature 10 5 0 -16 -5 -20 23 24 25 26 27 RF FREQUENCY (GHz) 28 29 -10 23 24 25 26 27 28 29 RF FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC572LC5 v06.0514 GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz Quadrature Channel Data Taken Without IF Hybrid IF Bandwidth* 10 20 RF/IF2 15 10 -10 RESPONSE (dB) ISOLATION (dB) 0 RF/IF1 -20 -30 -40 2LO/IF2 -50 2LO/RF 24 CONVERSION GAIN RETURN LOSS 0 -5 -15 2LO/IF1 23 5 -10 -20 0.5 -60 25 26 27 28 29 1 1.5 Amplitude Balance vs. LO Drive 2.5 3 3.5 28 29 Phase Balance vs. LO Drive 4 20 3 PHASE BALANCE (degrees) AMPLITUDE BALANCE (dB) 2 IF FREQUENCY (GHz) RF FREQUENCY (GHz) LO = 0 dBm LO = +2 dBm LO = +4 dBm LO = +6 dBm LO = +8 dBm 2 1 0 -1 23 24 25 26 27 28 LO = 0 dBm LO = +2 dBm LO = +4 dBm LO = +6 dBm LO = +8 dBm 15 10 5 0 -5 29 23 24 25 RF FREQUENCY (GHz) 27 Noise Figure vs. LO Drive, IF Frequency = 100 MHz 10 8 0dBm +2dBm +4dBm +6dBm +8dBm 8 NOISE FIGURE (dB) 6 4 2 0 0.5 26 RF FREQUENCY (GHz) Noise Figure vs. LO Drive, LO Frequency = 12 GHz NOISE FIGURE (dB) MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Isolations 0dBm +2dBm +4dBm +6dBm +8dBm 6 4 2 0 1 1.5 2 2.5 IF FREQUENCY (GHz) 3 3.5 4 21 22 23 24 25 26 27 28 29 RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid, LO frequency fixed at 12 GHz and RF varied 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC572LC5 v06.0514 GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz Absolute Maximum Ratings nLO mRF RF +2 dBm 0 1 2 3 4 LO Drive + 13 dBm 0 xx 37 12 32 45 Vdd 5.5V 1 12 41 0 37 41 Channel Temperature 175°C 2 xx xx 66 70 46 860 mW 3 xx xx xx xx 79 Continuous Pdiss (T=85°C) (derate 9.56 mW/°C above 85°C) 4 xx xx xx xx xx Thermal Resistance (RTH) (channel to package bottom) 104.6 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class 1B RF = 25 GHz @ -20 dBm LO = 12 GHz @ +4 dBm Data taken without IF hybrid All values in dBc below IF power level (1RF -2LO = 1 GHz) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT MxN Spurious Outputs 4 HMC572LC5 v06.0514 GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Outline Drawing NOTES: 1.. PACKAGE BODY MATERIAL: ALUMINA 2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3.. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND Package Information Part Number Package Body Material Lead Finish HMC572LC5 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H572 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC572LC5 v06.0514 GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz Pin Descriptions Function Description 1 VddLO Power supply for first stage of LO amplifier. 2, 4 - 6, 8, 9, 12 - 18, 21, 22, 25 - 28, 31, 32 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 3 VddLO2 Power supply for second stage of LO amplifier. 7 VddRF Power supply for RF LNA. 10, 19, 24, 29 GND These pins and ground paddle must be connected to RF/DC ground. 11 RF This pin is AC coupled and matched to 50 Ohms. 20 IF2 23 IF1 30 LO Interface Schematic This pin is DC coupled for applications not requiring operation to DC. This port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary frequency range. For operation to DC, this pin must not sink / source more than 3 mA of current or part non-function and possible failure will result. This pin is AC coupled and matched to 50 Ohms. Typical Application Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Pin Number 6 HMC572LC5 v06.0514 GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT Evaluation PCB List of Materials for Evaluation PCB 113758 [1] Item Description C1 - C4 Capacitor 0603, 0.01 µF J1, J4 PCB Mount SMA RF Connector, SRI J2, J3 PCB Mount SMA Connector, Johnson J5 - J7 DC Pin U1 HMC572LC5 PCB [2] 113756 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 7 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC572LC5 v06.0514 MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT GaAs MMIC I/Q DOWNCONVERTER 24 - 28 GHz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8