116255-HMC543LC4B

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC543LC4B v05.0514 PHASE SHIFTERS - DIGITAL - SMT 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Typical Applications Features The HMC543LC4B is ideal for: Low RMS Phase Error: 5° • EW Receivers Low Insertion Loss: 6.5 dB • Weather & Military Radar Excellent Flatness • Satellite Communications 360° Coverage, LSB = 22.5° • Beamforming Modules 24 Lead Ceramic SMT Package: 16mm2 Functional Diagram General Description The HMC543LC4B is a 4-bit digital phase shifter which is rated from 8 to 12 GHz, providing 0 to 360 degrees of phase coverage, with a LSB of 22.5 degrees. The HMC543LC4B features very low RMS phase error of 5 degrees and extremely low insertion loss variation of ±0.8 dB across all phase states. This high accuracy phase shifter is controlled with complementary logic of 0/-3V, and requires no fixed bias voltage. The HMC543LC4B is housed in a compact 4x4 mm ceramic leadless SMT package and is internally matched to 50 Ohms with no external components. Simple external level shifting circuitry can be used to convert a positive CMOS control voltage into complementary negative control signals. Electrical Specifications, TA = +25° C, 50 Ohm System, Control Voltage = 0/-3V Parameter Frequency Range Min. Typ. 8 Insertion Loss* 6.5 Input Return Loss* 10 Output Return Loss* 10 Phase Error* ±10 RMS Phase Error Gain Variation* Input Power for 1 dB Compression 21 Max. Units 12 GHz 8 dB dB dB ±15 deg 5 deg ±0.8 dB 24.5 dBm Input Third Order Intercept 40 dBm Control Voltage Current 0.4 µA *Note: All States Shown 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC543LC4B v05.0514 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Insertion Loss, All States Normalized Loss, All States 0 3 NORMALIZED LOSS (dB) INSERTION LOSS (dB) -2 -4 -6 -8 -10 2 1 0 -1 -2 -3 -12 -4 8 9 10 11 12 8 9 FREQUENCY (GHz) Input Return Loss, All States 12 11 12 20 15 PHASE ERROR (degrees) -5 RETURN LOSS (dB) 11 Phase Error, All States 0 -10 -15 -20 -25 10 5 0 -5 -10 -15 -30 -20 8 9 10 11 12 8 9 FREQUENCY (GHz) 10 FREQUENCY (GHz) Output Return Loss, All States Relative Phase Shift, All States 0 RELATIVE PHASE SHIFT (degrees) 400 -5 RETURN LOSS (dB) 10 FREQUENCY (GHz) PHASE SHIFTERS - DIGITAL - SMT 4 -10 -15 -20 -25 -30 350 300 250 200 150 100 50 0 8 9 10 FREQUENCY (GHz) 11 12 8 9 10 11 12 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC543LC4B v05.0514 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz 20 55 15 50 MAX 10 45 IP3 (dBm) RELATIVE PHASE SHIFT (degrees) Input IP3, All States RMS 5 AVERAGE 0 40 35 -5 30 -10 25 8 9 10 11 12 8 9 FREQUENCY (GHz) 30 90 28 P1dB (dBm) 100 80 70 12 11 12 26 24 22 60 20 8 9 10 11 8 12 9 RMS Phase Error vs. Temperature Insertion Temperature All States 0 15 -2 INSERTION LOSS (dB) 20 10 5 0 +25C +85C -40C -5 10 FREQUENCY (GHz) FREQUENCY (GHz) RELATIVE PHASE SHIFT (degrees) 11 Input P1dB, All States 50 -4 -6 -8 -10 -10 -12 8 9 10 FREQUENCY (GHz) 3 10 FREQUENCY (GHz) Input IP2, All States IP2 (dBm) PHASE SHIFTERS - DIGITAL - SMT Relative Phase Shift, RMS, Average, Max, All States 11 12 8 9 10 11 12 FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC543LC4B v05.0514 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Phase Error vs. State PHASE ERROR (degrees) 15 8 GHz 10 State Bias Condition Low (0) -2.5 to -3.5V @ 0.4 µA Typ. High (1) 0 to +0.3V @ 0.4 µA Typ. 5 0 -5 Absolute Maximum Ratings -10 9,10,11 & 12 GHz -15 -20 0 50 100 150 200 250 300 350 STATE (degrees) Input Power (RFin) (8-12 GHz) +27 dBm (T= +85 °C) Channel Temperature (Tc) 150 °C Thermal Resistance (channel to ground paddle) 130 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Truth Table Control Voltage Input Bit 1 Bit 1 Bit 2 Bit 2 Bit 3 Bit 3 Bit 4 Bit 4 Phase Shift (Degree) RFIN - RFOUT 0 1 0 0 0 1 1 0 1 1 1 0 0 0 1 0 0 1 1 1 0 1 1 0 0 0 0 1 0 1 1 1 1 0 1 0 0 0 0 0 1 1 1 1 1 1 0 0 Reference 22.5 45.0 90.0 180.0 337.5 PHASE SHIFTERS - DIGITAL - SMT Control Voltage 20 Any combination of the above states will provide a phase shift approximately equal to the sum of the bits selected. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC543LC4B v05.0514 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz PHASE SHIFTERS - DIGITAL - SMT Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.. Package Information Part Number Package Body Material Lead Finish HMC543LC4B Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] H543 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX 5 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC543LC4B v05.0514 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz Pin Descriptions Function Description 1, 2, 17 - 24 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 3, 5, 14, 16 GND These pins and exposed ground paddle must be connected to RF/DC ground. 4 RFIN This port is matched to 50 Ohms. BIT3, BIT1, Non-Inverted Control Input. See truth table and control voltage tables. 6, 9, 11, 13 7, 8, 10, 12 15 BIT2, BIT4 BIT3, BIT1 BIT2, BIT4 Inverted Control Input. See truth table and control voltage tables. RFOUT This port is matched to 50 Ohms. Interface Schematic Application Circuit This circuit converts a single line positive (0/+5V) control signal to complementary negative (0/-3V) control signals. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com PHASE SHIFTERS - DIGITAL - SMT Pin Number 6 HMC543LC4B v05.0514 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz PHASE SHIFTERS - DIGITAL - SMT Evaluation PCB List of Materials for Evaluation PCB 116255 [1][3] Item Description J1 - J2 PCB Mount SMA RF Connector J3 - J4 Molex Header 2mm U1 HMC543LC4B 4-Bit Digital Phase Shifter PCB [2] 116253 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 [3] Please refer to part’s pin description and functional diagram for pin out assignments on evaluation board. 7 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC543LC4B v05.0514 PHASE SHIFTERS - DIGITAL - SMT 22.5° MMIC 4-BIT DIGITAL PHASE SHIFTER, 8 - 12 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8