HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
mixers - Downconverters - SMT
9
Typical Applications
Features
The HMC683LP6C(E) is Ideal for:
High Input IP3: +23 dBm
• Cellular/3G & LTE/WiMAX/4G
Conversion Gain: 7.5 dB
• Basestations & Repeaters
Low LO Drive: 0 dBm
• GSM, CDMA & OFDM
High Channel Isolation
• Dual Density Receivers
40 Lead 6x6mm SMT Package: 36mm2
Functional Diagram
General Description
The HMC683LP6C(E) is a high linearity, dual channel
downconverter with integrated LO amplifier in a 6x6
SMT QFN package covering 0.7 - 1.0 GHz. Excellent
input IP3 performance of +23 dBm for down conversion
is provided for 3G & 4G GSM/CDMA applications at
an LO drive of 0 dBm. With an input 1 dB compression
of +11 dBm, the RF port will accept a wide range of
input signal levels. Conversion gain is 7.5 dB typical.
The 60 - 500 MHz IF frequency response will satisfy
various GSM/CDMA receive frequency plans.
Electrical Specifications, TA = +25 °C, IF - 100 MHz, LO = 0 dBm
Vcc1, 2 = Vcc_BAL1, 2 = Vcc_AMP1, 2 [1] = Vcc_IF1P, N = Vcc_IF2P, N = +5V, BIAS1, 2 = +2.5V
Parameter
Min.
Typ.
Units
700 - 1000
MHz
Frequency Range, LO
570 - 900
MHz
60 - 500
MHz
Frequency Range, IF
Conversion Gain
5
7.5
Noise Figure (SSB)
dB
11
dB
10
16
dB
LO to IF Isolation
15
20
dB
RF to IF Isolation
19
28
dB
LO to RF Isolation
IP3 (Input)
23
dBm
1 dB Compression (Input)
11
dBm
Channel to Channel Isolation
50
dB
LO Drive Input Level (Typical)
Supply Current (Icc)
[1] See Application Circuit
9-1
Max.
Frequency Range, RF
-3 to +3
420
dBm
520
mA
[2] Unless otherwise noted all measurements with low side LO & IF = 100 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
Single Channel: Isolation
0
10
-10
8
6
+25 C
+85 C
-40 C
4
2
-20
-30
-40
RF/IF
LO/RF
LO/IF
-50
0
0.6
0.7
0.8
0.9
1
-60
0.6
1.1
0.7
FREQUENCY (GHz)
0
10
-5
8
6
-3 dBm
0 dBm
+3 dBm
2
0.7
0.8
0.9
1
1.1
-10
-15
-20
RF1
LO1 LO_SEL 0V
LO1 LO_SEL +5V
-25
0
0.6
0.9
Single Channel: Return Loss
12
RETURN LOSS (dB)
CONVERSION GAIN (dB)
0.8
FREQUENCY (GHz)
Single Channel:
Conversation Gain vs. LO Drive
4
9
1
-30
0.5
1.1
0.6
FREQUENCY (GHz)
0.7
0.8
0.9
1
1.1
FREQUENCY (GHz)
mixers - Downconverters - SMT
12
ISOLATION (dB)
CONVERSION GAIN (dB)
Single Channel:
Conversion Gain vs. Temperature
Single Channel:
Input P1dB vs. Temperature
Single Channel: IF Bandwidth
20
15
10
15
0
P1dB (dBm)
RESPONSE (dB)
5
IF Return Loss
Conversion Gain
-5
-10
10
+25 C
+85 C
-40 C
5
-15
-20
-25
0
0.1
0.2
0.3
FREQUENCY (GHz)
0.4
0.5
0
0.6
0.7
0.8
0.9
1
1.1
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
9-2
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
30
25
25
20
20
IP3 (dBm)
IP3 (dBm)
Single Channel:
Input IP3 vs. Temperature
30
-3 dBm
0 dBm
+3 dBm
15
15
10
10
5
5
0
0.6
0.7
0.8
0.9
1
0
0.6
1.1
+25 C
+85 C
-40 C
0.7
FREQUENCY (GHz)
0.8
0.9
1
1.1
FREQUENCY (GHz)
Dual Channel:
Channel to Channel Isolation [1]
Dual Channel: LO1 to LO2 Isolation [2]
-20
-10
-20
-30
RF1 TO RF2 AT IFI
RF2 TO RF1 AT IF2
ISOLATION (dBc)
ISOLATION (dBc)
mixers - Downconverters - SMT
9
Single Channel: Input IP3 vs. LO Drive
-40
-30
-40
-50
-50
-60
-60
0.6
0.7
0.8
0.9
1
1.1
FREQUENCY (GHz)
-70
0.7
0.8
0.9
1
1.1
FREQUENCY (GHz)
Noise Figure vs. Temperature
[1] For 900 MHz, RF1 = 900 MHz @ 0 dBm, RF2 = 901 MHz
@ 0 dBm, LO = 800 MHz @ 0 dBm, IF2 terminated with
50 Ohms. Channel isolation is the dBc difference at IF1
port between the fundamental tone @ 100 MHz and the
leakage tone @ 101 MHz.
16
NOISE FIGURE (dB)
15
+25 C
+85 C
-40 C
14
13
[2] For 900 MHz, LO1 = 800 MHz @ 0 dBm, LO2 = 799 MHz
@ 0 dBm, LO1 is selected, RF1 = RF2 = 900 MHZ @ 0
dBm, IF2 terminated with 50 Ohms. LO1-LO2 isolation
is the dBc difference measured at the IF1 port between
the fundamental tone at 100 MHz and the leakage tone
@ 101 MHz.
12
11
10
9
8
0.6
0.7
0.8
0.9
1
1.1
FREQUENCY (GHz)
9-3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
+2RF -2LO Response vs. LO Drive [3]
55
50
+25 C
+85 C
-40 C
45
40
0.6
0.7
0.8
0.9
1
55
50
40
0.6
1.1
-3 dBm
0 dBm
+3 dBm
45
0.7
FREQUENCY (GHz)
75
75
+3RF-3LO RESPONSE (dBc)
+3RF-3LO RESPONSE (dBc)
80
70
65
60
+25 C
+85 C
-40 C
0.7
0.8
0.9
FREQUENCY (GHz)
0.9
1
1.1
+3RF -3LO Response vs. LO Drive [3]
80
55
0.8
FREQUENCY (GHz)
+3RF -3LO Response vs. Temperature [3]
50
0.6
9
60
+2RF-2LO RESPONSE (dBc)
+2RF-2LO RESPONSE (dBc)
60
1
1.1
70
65
-3 dBm
0 dBm
+3 dBm
60
55
50
0.6
0.7
0.8
0.9
1
1.1
FREQUENCY (GHz)
mixers - Downconverters - SMT
+2RF -2LO Response vs. Temperature [3]
[1] Referenced to RF Input Power @ 0 dBm
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
9-4
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
mixers - Downconverters - SMT
9
MxN Spurious @ IF Port
Harmonics of LO
nLO
nLO Spur @ RF Port
mRF
0
1
2
3
4
LO Freq. (GHz)
1
2
3
4
0
xx
23
16
22
28
0.6
17
33
36
37
1
34
0
38
16
45
0.7
15
25
34
39
2
55
50
56
59
82
0.8
17
24
33
30
3
88
57
82
63
88
0.9
20
26
35
25
4
93
94
92
94
94
1.0
21
28
41
54
1.1
23
29
53
57
RF Freq. = 0.9 GHz @ -5 dBm
LO Freq. = 0.8 GHz @ 0 dBm
All values in dBc below IF power level (1RF - 1LO).
Typical Supply Current vs. Vcc
LO = 0 dBm
All values in dBc below input LO level measured at RF port.
Truth Table
Vcc
Icc (A)
LO_SEL (V)
4.75
390
0
LO Signal Path
LO1
5.00
420
5
LO2
5.25
450
Downconverter will operate over full voltage range shown above.
Absolute Maximum Ratings
9-5
RF / IF Input (Vcc= +5V)
+15 dBm
LO Drive (Vcc= +5V)
+6 dBm
Vcc (LO or IF)
5.5V
Channel Temperature
12.5°C
Continuous Pdiss (T = 85°C)
(derate 110.53 mW/°C above 85°C)
4.42 W
Thermal Resistance
(channel to ground paddle)
9.05 °C/W
Storage Temperature
-65 to 150°C
Operating Temperature
-40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED
PLASTIC SILICA AND SILICON IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. PAD BURR LENGTH SHALL BE 0.15mm MAX.
PAD BURR HEIGHT SHALL BE 0.25mm MAX.
7. PACKAGE WARP SHALL NOT EXCEED 0.05mm
8. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
9. REFER TO HITTITE APPLICATION NOTE
FOR SUGGESTED PCB LAND PATTERN.
mixers - Downconverters - SMT
9
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC683LP6C
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC683LP6CE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H683
XXXX
H683
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
9-6
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
mixers - Downconverters - SMT
9
9-7
Pin Descriptions
Pin Number
Function
Description
1, 10
RF1, RF2
These are the RF inputs of the mixers. See
application circuit for the off-chip matching
components
2, 9
TAP1, TAP2
These are the center taps of the internal RF baluns.
Connect these pins to the AC ground via external
capacitors. See application circuit.
3, 5, 8, 15,
16, 22, 23,
26 - 29, 35, 36
GND
These pins must be connected to RF ground.
4, 7
BIAS1, BIAS2
Bias pins for mixer cores. See
application circuit for the nominal value.
6, 17, 18,
24, 33, 34
Vcc1, Vcc_BAL2,
Vcc_AMP2,
Vcc2, Vcc_AMP1,
Vcc_BAL1
Power supply voltage pins. See application
circuit for bypass capacitors required.
11, 20, 31, 40
N/C
No Connection required. These pins may be
connected to RF GND without affecting performance.
12, 39
IND1, IND2
Current source inductors for IF amplifiers.
13, 14,
38, 37
IF2P, IF2N,
IF1P, IF1N
Differential IF outputs and DC bias for IF amplifiers.
19, 32
BIAS_ADJ1,
BIAS_ADJ2
Adjusts LO buffer amplifies current via
external resistor. See application circuit.
21, 30
LO2, LO1
These are LO inputs of the mixers. See application
circuit for off-chip matching components.
25
LO_SEL
Control voltage for LO1 or LO2 selection. LO1 is
selected when LO SEL is set low. LO2 is selected
when LO SEL is set high. See application circuit and
truth table for low and high voltage levels.
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
9
mixers - Downconverters - SMT
Evaluation PCB
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have
50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the
ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and
bottom ground planes. The evaluation circuit board shown is available from Hittite upon request.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
9-8
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
mixers - Downconverters - SMT
9
9-9
List of Materials for Evaluation PCB 119926 [1]
Item
Description
J1 - J6
PCB Mount SMA Connector
J7 - J10
2mm Vertical Molex 8pc Connector
L1, L2
51 nH Inductor, 0603 Pkg.
L3 - L6
390 nH Inductor, 0603 Pkg.
L7, L8
5.1 nH Inductor, 0402 Pkg.
L9, L10
3.6 nH Inductor, 0402 Pkg.
C7, C8, C26, C38
22 pF Capacitor, 0402 Pkg.
C9, C10
10 nF Capacitor, 0603 Pkg.
C11, C17, C19, C24, C27, C29,
C34, C37, C40, C48, C50
1 nF Capacitor, 0402 Pkg.
C12, C15, C16, C18, C20,
C25, C28, C30, C35, C36,
C39, C47, C49
0.1 µF Capacitor, 0603 Pkg.
C13, C14, C60 - C63
100 pF Capacitor, 0402 Pkg.
C21, C22, C32, C33
0.01 µF Capacitor, 0402 Pkg.
C51 - C59
0.47 µF Capacitor, 0603 Pkg.
R7, R8
330 Ohm Resistor, 0603 Pkg.
T1, T2
1:1 Transformer - Tyco ETC1-IT
U1
HMC683LP6C(E)
PCB [2]
118274 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon-25FR adn FR4
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC683LP6C / 683LP6CE
v02.0808
HIGH IP3 DUAL CHANNEL
DOWNCONVERTER w/ LO SWITCH, 0.7 - 1.0 GHz
9
mixers - Downconverters - SMT
Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
9 - 10
工商网监
湘ICP备2023018690号
