HMC613LC4B
v11.0514
POWER DETECTORS - SMT
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
Typical Applications
Features
The HMC613LC4B is ideal for:
Wide Input Bandwidth; 0.1 to 20 GHz
• EW, ELINT & IFM Receivers
High Logging Range: 59 dB (-54 to +5) @ 18 GHz
• DF Radar Systems
Output Frequency Flatness: ±1.5 dB
• ECM Systems
Log Linearity: ±1 dB
• Broadband Test & Measurement
Fast Rise/Fall Times: 4/18 ns
• Power Measurement & Control Circuits
Recovery Time: 26 ns
• Military & Space Applications
Single Positive Supply: +3.3V
Space Level Packaging Available
24 Lead 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
The HMC613LC4B is a Successive Detection Log
Video Amplifier (SDLVA) which operates from 0.1 to
20 GHz. The HMC613LC4B provides a logging range
of 59 dB. This device offers typical fast rise/fall times
of 4/18 ns and a superior delay time of 14 ns. The
HMC613LC4B log video output slope is typically 14
mV/dB. Maximum recovery times are less than 30 ns.
The HMC613LC4B is available in a highly compact 4x4
mm SMT ceramic package and is ideal for high speed
channelized receiver applications.
Electrical Specifications, TA = +25 °C Vcc1 = Vcc2 = +3.3V
Parameter
Conditions
Input Frequency Range [1][2]
Frequency Flatness
Log Linearity
Typ.
Units
0.1 to 20
GHz
Pin = -25 dBm
±1.5
dB
Pin = -50 dBm to +3 dBm
±1
dBm
Log Linearity over Temperature
Pin = -25dBm
±1
dB
Minimum Logging Range
to ±3 dB error
-54 @ 18 GHz
dBm
Maximum Logging Range
to ±3 dB error
5 @ 18 GHz
dBm
Input Return Loss
8
dB
Log Video Minimum Output Voltage
1
V
Log Video Maximum Output Voltage
Log Video Output Rise Time
10% to 90%
Log Video Output Fall Time
90% to 10%
Log Video Recovery Time
Log Video Output Slope
Log Video Output Slope Variation over Temperature
@ 10 GHz
1.8
V
4
ns
18
ns
26
ns
14
mV/dB
5
µV/dB°C
Log Video Propagation Delay
14
ns
Supply Current (Icc1)
80
mA
8
mA
Supply Current (Icc2)
@ Pin = -30 dBm
[1] Electrical specs and performance plots are given for single-ended operation
[2] Video output load should be 1K Ohm or higher.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
VIDEO OUT & Error
vs. Input Power, Fin = 100 MHz [1]
4
2
0
-1
1
1.5
0
-1
1
-2
ERR (+25C)
ERR (+85C)
ERR (-40C)
-3
-4
-60
-40
-30
-20
-10
0
-60
-3
-50
-40
3
Ideal
Logout (+25C)
Logout (+85C)
Logout (-40C)
-1
1
ERR (+25C)
ERR (+85C)
ERR (-40C)
VIDEO OUT (V)
0
1
0
-1
1
ERR (+25C)
ERR (+85C)
ERR (-40C)
-3
0
-60
-3
-50
-40
3
-1
1
ERR +25C
ERR +85C
ERR -40C
VIDEO OUT (V)
VIDEO OUT (V)
10
3
1
1.5
0
-1
1
-2
-3
0.5
0
10
INPUT POWER (dBm)
2
-2
ERR +25C
ERR +85C
ERR -40C
-3
0.5
-60
ERROR (dB)
0
-10
0
Ideal
Logout +25C
Logout +85C
Logout -40C
ERROR (dB)
1
-20
-10
2
2
Ideal
Logout +25C
Logout +85C
Logout -40C
-30
-20
VIDEO OUT & Error
vs. Input Power, Fin = 14 GHz [1]
2
-40
-30
INPUT POWER (dBm)
VIDEO OUT & Error
vs. Input Power, Fin = 10 GHz [1]
-50
-2
0.5
10
INPUT POWER (dBm)
1.5
2
1.5
-2
0.5
-10
10
ERROR (dB)
1
-20
0
3
2
1.5
-30
-10
2
ERROR (dB)
VIDEO OUT (V)
Ideal
Logout (+25C)
Logout (+85C)
Logout (-40C)
-40
-20
VIDEO OUT & Error
vs. Input Power, Fin = 6 GHz [1]
2
-50
-30
INPUT POWER (dBm)
VIDEO OUT & Error
vs. Input Power, Fin = 2 GHz [1]
-60
-2
0.5
-50
INPUT POWER (dBm)
-60
2
ERROR (dB)
1
Ideal
Logout (+25C)
Logout (+85C)
Logout (-40C)
VIDEO OUT (V)
3
ERROR (dB)
3
2
0.1GHz
2.0GHz
6.0GHz
10.0GHz
14.0GHz
18.0GHz
20.0Ghz
POWER DETECTORS - SMT
Error Flatness vs.
Input Power Over Frequency [1][2]
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
[1] Electrical Specs and performance plots are given at single-ended operation
[2] An average ideal line is used to calculate error curves.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
VIDEO OUT & Error
vs. Input Power, Fin = 18 GHz [1]
VIDEO OUT & Error
vs. Input Power, Fin = 20 GHz [1]
3
Ideal
Logout (+25C)
Logout (+85C)
Logout (-40C)
1
1.5
0
-1
1
ERR (+25C)
ERR (+85C)
ERR (-40C)
VIDEO OUT (V)
2
-50
-40
-30
-20
0
-1
1
ERR (+25C)
ERR (+85C)
ERR (-40C)
-3
-60
1
1.5
-2
0.5
-10
0
-3
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
VIDEO OUT vs. Frequency
Over Input Power & Temperature [1]
VIDEO OUT vs. Frequency
Over Input Power & Bias Voltage [1]
1.8
1.8
+25C
+85C
-40C
1.7
-10 dBm
-25 dBm
1.3
1.2
-10 dBm
1.6
1.5
1.4
3.0V
3.3V
3.6V
1.7
VIDEO OUT (V)
1.6
VIDEO OUT (V)
-2
0.5
10
INPUT POWER (dBm)
1.5
1.4
-25 dBm
1.3
1.2
-40 dBm
1.1
-40 dBm
1.1
1
1
0
4
8
12
16
20
0
4
FREQUENCY (GHz)
8
12
16
20
FREQUENCY (GHz)
Rise Time @
Different Frequency @ 0 dBm [1]
Input Return Loss vs. Frequency [1]
2
0
2 GHz
10 GHz
18 GHz
VIDEO OUT (V)
1.8
RETURN LOSS (dB)
2
ERROR (dB)
VIDEO OUT (V)
Ideal
Logout (+25C)
Logout (+85C)
Logout (-40C)
3
2
ERROR (dB)
POWER DETECTORS - SMT
2
-5
+25 C
+85 C
-40 C
-10
1.6
1.4
1.2
1
0.8
-15
0
5
10
15
20
FREQUENCY (GHz)
0
20
40
60
80
100
TIME (ns)
[1] Electrical Specs and performance plots are given at single-ended operation
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
2
2
1.8
1.8
2GHz
10GHz
18GHz
1.6
1.4
1.2
1
+5dBm
0dBm
-5dBm
-10dBm
1.6
1.4
1.2
1
0.8
0.8
0
20
40
60
80
100
TIME (ns)
0
20
40
60
80
100
TIME (ns)
POWER DETECTORS - SMT
Fall Time @
Different Power Levels @ 10 GHz [1]
VIDEO OUT (V)
VIDEO OUT (V)
Fall Time @
Different Frequency @ 0 dBm [1]
[1] Electrical Specs and performance plots are given at single-ended operation
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
POWER DETECTORS - SMT
Absolute Maximum Ratings
Vcc1, Vcc2
3.7 V
Input Signal Amplitude
12 dBm
Junction Temperature
125 °C
Continuous Pdiss (T=85 °C)
Derate 11.5 mW/°C above 85 °C
0.46 W
Thermal Resistance (Rth)
(junction to package bottom)
87.1 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 0
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD
OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC613LC4B
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H613
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
Pin Descriptions
Function
Description
N/C
These pins are not internally connected.
3, 6, 13,
16, 20, 24
N/C
These pins are not connected internally.
However, this product is specified with
these pins connected to RF/DC Ground.
4, 5
IN+, IN-
RF Input pins Connect RF to IN+, and AC couple
IN- to ground via 50 Ohm for single ended operation.
8, 9
GND
These pins and the exposed package bottom
must be connected to a high quality RF/DC ground.
14, 15
Video FB,
Video Out
Video out and feedback. These pins should be shorted to
each other (see application circuit). Video out load should
be at least 1K Ohm or higher.
17
EN
Enable pin connected to Vcc1 or Vcc2 for normal
operation. Total supply current reduced to less than
3mA when EN is set to 0V.
21
Vcc2
Interface Schematic
POWER DETECTORS - SMT
Pin Number
1, 2, 7, 10 - 12,
18, 19
Bias Supply. Connect supply voltage to
these pins with appropriate filtering. Connect Vcc2 with
Vcc1. See application circuit.
To ensure proper start-up supply rise time
should be faster than 100usec
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
Pin Descriptions
POWER DETECTORS - SMT
Pin Number
7
22, 23
Function
Description
Vcc1
Bias Supply. Connect Supply Voltage
to these pins with appropriate filtering. Connect Vcc2 with
Vcc1. See application circuit.
Interface Schematic
To ensure proper start-up supply rise time
should be faster than 100usec
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
POWER DETECTORS - SMT
Application Circuit
Note1: Connect Vcc2 and Vcc1 together for Nominal operation.
Note2: Video output load should be 1K Ohm or higher.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
HMC613LC4B
v11.0514
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
POWER DETECTORS - SMT
Evaluation PCB
List of Materials for Evaluation PCB 120257 [1]
Item
Description
J1
K-Type Connector
J2
SMA Connector
J3 - J5
DC Pins
C1, C2
33 pF Capacitor, 0201 Pkg.
C3, C4
10k pF Capacitor, 0402 Pkg.
C5
47 pF Capacitor, 0402 Pkg.
C6, C7
4.7 µF Capacitor, CASE A Pkg.
R2, R3, R5
0 Ohm Resistor, 0402 Pkg.
R7
0 Ohm Resistor, 0201 Pkg.
R8
49.9 Ohm Resistor, 0201 Pkg.
U1
HMC613LC4B SDLVA
PCB [2]
120255 Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25 FR
9
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC613LC4B
v11.0514
POWER DETECTORS - SMT
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.1 - 20 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10
工商网监
湘ICP备2023018690号
