HMC710LC5
v04.0514
Features
The HMC710LC5 is ideal for:
High Conversion Gain: 12 dB
• Point-to-Point and Point-to-Multi-Point Radio
Sideband Rejection: -20 dBc
• Military Radar, EW & ELINT
2 LO to RF Isolation: 12 dB
• Satellite Communications
Output IP3: +30 dBm
• Sensors
32 Lead 5x5mm SMT Package: 25mm²
Functional Diagram
General Description
TE
Typical Applications
B
SO
LE
The HMC710LC5 is a compact GaAs MMIC I/Q
upconverter in a leadless RoHS compliant SMT
package. This device provides a small signal
conversion gain of 12 dB with -20 dBc of sideband
rejection. The HMC710LC5 utilizes a driver amplifier
preceded by an I/Q mixer where the LO is driven
by an active x2 multiplier. IF1 and IF2 mixer inputs
are provided and an external 90° hybrid is needed
to select the required sideband. The I/Q mixer topology reduces the need for filtering of the unwanted
sideband. The HMC710LC5 is a much smaller
alternative to hybrid style single sideband upconverter
assemblies and it eliminates the need for wire
bonding by allowing the use of surface mount
manufacturing techniques.
Electrical Specifications,
TA = +25 °C, IF = 1000 MHz, LO = +6 dBm, Vdd1, 2, 3 = +5V, Idd2 + Idd3 = 150 mA [1][3]
Parameter
Min.
Frequency Range, RF
O
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
Typ.
Max.
16 - 21
Units
GHz
Frequency Range, LO
7.5 - 11
GHz
Frequency Range, IF
DC - 3.5
GHz
7
12
dB
-12
-20
dBc
20
dBm
2 LO to RF Isolation
12
dB
2 LO to IF Isolation [2]
20
dB
Conversion Gain
Sideband Rejection
1 dB Compression (Output)
IP3 (Output)
30
dBm
Supply Current Idd1
52
90
108
Supply Current Idd2
24
30
mA
mA
Supply Current Idd3
96
120
mA
[1] Unless otherwise noted all measurements performed with high side LO, IF = 1000 MHz and external 90° IF hybrid.
[2] Data taken without external IF hybrid.
[3] Adjust Vgg between -2 to 0V to achieve Idd2 + Idd3 = 150 mA Typical.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
place Chelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayPhone:
result from 978-250-3343
its use. Specifications subject
to
change
without
notice.
No
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks areApplication
the property of their
respective owners.
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC710LC5
v04.0514
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
Data Taken as SSB Upconverter with External IF Hybrid
18
CONVERSION GAIN (dB)
20
18
16
14
12
8
+25 C
+85 C
-40 C
6
14
12
10
8
6
4
4
16
17
18
19
20
21
22
16
17
18
Conversion Gain vs. IF Frequency
20
20
21
22
21
22
Conversion Gain vs. Idd2 + Idd3
20
18
18
IF = 100MHz
IF = 1000MHz
16
12
10
8
4
15
B
SO
14
6
16
17
18
19
20
21
22
23
Idd1+Idd2 = 110mA
Idd1+Idd2 = 130mA
Idd1+Idd2 = 150mA
16
14
12
10
8
6
4
24
16
17
18
RF FREQUENCY (GHz)
0
20
0
-5
RETURN LOSS (dB)
RF
LO
-5
19
RF FREQUENCY (GHz)
IF Return Loss [1]
O
RF, LO Return Loss
RETURN LOSS (dB)
19
RF FREQUENCY (GHz)
LE
RF FREQUENCY (GHz)
CONVERSION GAIN (dB)
+3 dBm
+6 dBm
+9 dBm
16
TE
10
CONVERSION GAIN (dB)
CONVERSION GAIN (dB)
20
-10
-15
-20
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Conversion Gain vs. LO Drive
Conversion Gain vs. Temperature
-10
-15
-20
IF1
IF2
-25
-25
2
4
6
8
10
12
14
16
FREQUENCY (GHz)
18
20
22
24
-30
0
1
2
3
4
5
6
7
8
IF FREQUENCY (GHz)
[1] Data taken without external IF hybrid
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2delivery,
and Drive,
to placeChelmsford,
orders: AnalogMA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373
Order
On-line at www.hittite.com
Phone: 781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC710LC5
v04.0514
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
Data Taken as SSB Upconverter with External IF Hybrid
Side Band Rejection
Output P1dB vs. Temperature
23
-10
P1dB (dBm)
22
-30
19
+25 C
+85 C
-40 C
17
16
16
17
18
19
20
21
22
16
RF FREQUENCY (GHz)
17
18
19
20
21
22
21
22
21
22
LE
RF FREQUENCY (GHz)
Output IP3 vs. Temperature
Output IP3 vs. LO Drive
34
34
32
32
30
28
B
SO
IP3 (dBm)
20
18
+25 C
+85 C
-40 C
26
24
16
17
18
19
20
21
30
+3 dBm
+6 dBm
28
26
24
22
16
17
RF FREQUENCY (GHz)
O
Output IP3 vs. IF Frequency
34
32
18
19
20
RF FREQUENCY (GHz)
Output IP3 vs. Idd2 + Idd3
34
IF = 100MHz
IF = 1000MHz
32
IP3 (dBm)
30
28
26
30
28
Idd1+Idd2 = 110mA
Idd1+Idd2 = 130mA
Idd1+Idd2 = 150mA
26
24
24
16
17
18
19
20
RF FREQUENCY (GHz)
3
21
TE
-20
IP3 (dBm)
SIDEBAND REJECTION (dBc)
24
-40
IP3 (dBm)
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
0
21
22
16
17
18
19
20
RF FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and Drive,
to placeChelmsford,
orders: AnalogMA
Devices,
Inc.,
For price, delivery and to place orders: Hittite Microwave Corporation,
Elizabeth
01824
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC710LC5
v04.0514
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
0
0
-10
-10
-20
-20
-30
2LO/RF
IF1/RF
2LO/IF1
IF2/RF
2LO/IF2
-40
-40
-50
TE
-50
-30
-60
LO/RF
LO/IF1
LO/IF2
-60
-70
-70
16
17
18
19
20
21
22
16
RF FREQUENCY (GHz)
17
18
19
20
21
22
MxN Spurious Outputs [1]
LE
RF FREQUENCY (GHz)
Harmonics of LO
nLO
mIF
0
1
2
3
0
xx
19
48
xx
1
61
0
66
xx
nLO Spur @ IF Port
4
LO Freq.
(GHz)
1
2
3
4
xx
8
42
21
25
64
xx
35
24
47
50
32
53
xx
xx
10
38
19
49
47
61
38
72
xx
xx
11
42
25
44
51
52
62
73
xx
xx
12
34
18
50
xx
IF = 1 GHz @ 0 dBm
13
39
32
55
xx
LO = 9.75 GHz @ +6 dBm
14
22
35
52
xx
3
4
B
SO
9
35
2
Data taken without IF hybrid
O
All values in dBc below RF power level (-1IF + 2LO)
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Isolations with LO [1]
ISOLATION (dB)
ISOLATION (dB)
Isolations with 2LO [1]
[1] Data taken without external IF hybrid
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price, delivery and to place orders: Hittite Microwave Corporation,
Elizabeth
Drive,
01824
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC710LC5
v04.0514
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
5.25V
Gate Bias Voltage (Vgg)
-3 to 0V
IF Input Power (IF1, IF2)
20 dBm
LO Drive (LO IN)
20 dBm
Channel Temperature
175 °C
Continuous Pdiss (T = 85°C)
(derate 16.2 mW/°C above 85°C)
1.46 mW
Thermal Resistance
(channel to ground paddle)
61.8 °C/W
-65 to +150 °C
Operating Temperature
-55 to +85 °C
ESD Sensitivity (HBM)
Class 1A
LE
Storage Temperature
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
TE
Drain Bias Voltage (Vdd1, 2, 3)
B
SO
Outline Drawing
O
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Absolute Maximum Ratings
NOTES:
1.. PACKAGE BODY MATERIAL: ALUMINA
2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES
GOLD OVER 50 MICROINCHES MINIMUM NICKLE
3.. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM
6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND
Package Information
Part Number
Package Body Material
Lead Finish
HMC710LC5
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H710
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC710LC5
v04.0514
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
100 pF
C4 - C7
1000 pF
C8 - C11
2.2 µF
O
C1 - C3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and Drive,
to placeChelmsford,
orders: AnalogMA
Devices,
Inc.,
For price, delivery and to place orders: Hittite Microwave Corporation,
Elizabeth
01824
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
B
SO
LE
TE
Typical Application
6
HMC710LC5
v04.0514
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
7
Function
Description
Interface Schematic
1 - 5, 7, 8, 11,
16, 17, 19, 20,
22 - 28
N/C
No Connection required. These pins may be connected to
RF/DC ground without affecting performance.
6
Vdd1
Power supply voltage for x2 multiplier. See application
circuit for required external components.
9
LOIN
This pin is AC coupled
and matched to 50 Ohms.
10, 13, 15, 30, 32
GND
These pins and package bottom must be
connected to RF/DC ground.
12
Vgg
Gate control for RF amplifier, please follow “MMIC Amplifier
Biasing Procedure” application note. See application circuit
for required external components
14
RFOUT
This pin is AC coupled
and matched to 50 Ohms.
LE
TE
Pin Number
Vdd2,
Vdd3
Power supply voltage for RF amplifier. See application
circuit for required external components.
29
IF1
31
IF2
Differential IF input pins. For applications not requiring
operation to DC, an off chip DC blocking capacitor should
be used. For operation to DC this pin must not source/sink
more than 3mA of current or part non function and possible
part failure will result.
B
SO
18, 21
O
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
Pin Descriptions
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and Drive,
to placeChelmsford,
orders: AnalogMA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may
result
from
its
use.
Specifications
subject
to
change
without
notice.
No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order 781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC710LC5
v04.0514
GaAs MMIC I/Q UPCONVERTER
16 - 21 GHz
List of Materials for Evaluation PCB 120412 [1]
Item
Description
J1, J2
PCB Mount SMA SRI Connector
J3, J4
PCB Mount SMA Connector
J5 - J12
DC Pin
C1 - C3
100 pF Capacitor, 0402 Pkg.
C4
1000 pF Capacitor, 0402 Pkg.
C5 - C7
1000 pF Capacitor, 0603 Pkg.
C8 - C11
2.2 µF Tantalum Capacitor Case A
U1
HMC710LC5 Upconverter
PCB [2]
120410 Evaluation Board
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be
connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
MIXERS - I/Q MIXERS, IRMS & RECEIVERS - SMT
O
B
SO
LE
TE
Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR, FR4
Information
furnished
by Analog and
Devices
believedorders:
to be accurate
and Microwave
reliable. However,Corporation,
no
For price, 2
delivery,
and to
place Chelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
toisplace
Hittite
Elizabeth
Drive,
01824
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that mayPhone:
result from 978-250-3343
its use. Specifications subject
to
change
without
notice.
No
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks areApplication
the property of their
respective owners.
Support:
Phone: 978-250-3343
or apps@hittite.com
8
工商网监
湘ICP备2023018690号
