HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Typical Applications
Features
The HMC698LP5(E) is ideal for:
Ultra Low SSB Phase Noise Floor:
-153 dBc/Hz @ 10 kHz offset @ 100 MHz
Reference Frequency.
• Satellite Communication Systems
• Point-to-Point Radios
Programmable Divider (N= 12 - 259) Operating
up to 7 GHz
• Military Applications
• Sonet Clock Generation
PLL - INTEGER-n synthesizer - SMT
6
Open Collector Output Buffer Amplifiers for
Interfacing w/ Op-Amp Based Loop Filter
Reversible Polarity PFD w/ Lock Detect Output
32 Lead 5x5mm SMT Package: 25mm2
Functional Diagram
General Description
The HMC698LP5(E) is a frequency synthesizer with
a wideband reversible polarity digital PFD and lock
detect output. The divider operates unconditionally
from 80 - 7000 MHz with a continuous integer
division ratio of 12 to 259. The HMC698LP5(E) high
frequency operation along with ultra low phase noise
floor make possible synthesizers with wide loop
bandwidth and low N resulting in fast settling and
very low phase noise. When used in conjunction with
a differential loop filter, the HMC698LP5(E) can be
used to phase lock a VCO to a reference oscillator.
Electrical Specifications, TA = +25° C, Vcc = Vcc1 = Vcc2 = Vcc3 = Vcc_pd = 5V
Parameter
Maximum Ref. Input Frequency
Conditions
Sine or Square Wave Input
Minimum Ref. Input Frequency
Square Wave Input [2]
Reference Input Power Range
100 MHz Frequency
Min.
[1]
Maximum VCO Input Frequency
Typ.
1300
-5
PFD Output Voltage
PFD Gain
SSB Phase Noise
10
MHz
+5
dBm
7000
100 MHz Input Frequency
Units
MHz
MHz
Minimum VCO Input Frequency
VCO Input Power Range
Max.
-10
80
MHz
+5
dBm
2000
mV, Pk - Pk
Gain = Vpp / 2π Rad.
0.32
V/Rad.
@ 10 kHz Offset @ 100 MHz Square Wave Ref. Input
Pin= 0 dBm
-153
dBc/Hz
310
mA
Total Supply Current
[1] Maximum frequencies may be limited by available counter division ratio.
[2] Square wave input achieves best phase noise at lower ref. frequency (see sine & square wave comparison plots)
6-1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Phase Noise Floor [1][2][3]
Ref = Sine Wave, Vcc = 4.75V
Phase Noise Floor [1][2][3]
Ref = Square Wave, Vcc = 4.75V
-100
-10 dBm
-5 dBm
0 dBm
+5 dBm
-120
-130
-140
-150
-160
-170
-180
2
10
-110
-130
-140
-150
-160
-170
3
4
10
10
-180
2
10
5
10
OFFSET FREQUENCY (Hz)
-110
-120
SSB PHASE NOISE (dBc/Hz)
SSB PHASE NOISE (dBc/Hz)
5
10
-100
-10 dBm
-5 dBm
0 dBm
+5 dBm
-130
-140
-150
-160
-170
-10 dBm
-5 dBm
0 dBm
+5 dBm
-110
-120
-130
-140
-150
-160
-170
3
10
4
10
-180
2
10
5
10
OFFSET FREQUENCY (Hz)
3
10
4
10
5
10
OFFSET FREQUENCY (Hz)
Phase Noise Floor [1][2][3]
Ref = Square Wave, Vcc = 5.25V
Phase Noise Floor [1][2][3]
Ref = Sine Wave, Vcc = 5.25V
-100
-100
-110
-10 dBm
-5 dBm
0 dBm
+5 dBm
-120
SSB PHASE NOISE (dBc/Hz)
SSB PHASE NOISE (dBc/Hz)
4
10
Phase Noise Floor [1][2][3]
Ref = Square Wave, Vcc = 5V
-100
-130
-140
-150
-160
-170
-180
2
10
3
10
6
OFFSET FREQUENCY (Hz)
Phase Noise Floor [1][2][3]
Ref = Sine Wave, Vcc = 5V
-180
2
10
-10 dBm
-5 dBm
0 dBm
+5 dBm
-120
-110
-10 dBm
-5 dBm
0 dBm
+5 dBm
-120
-130
-140
-150
PLL - INTEGER-n synthesizer - SMT
-110
SSB PHASE NOISE (dBc/Hz)
SSB PHASE NOISE (dBc/Hz)
-100
-160
-170
3
10
4
10
5
10
OFFSET FREQUENCY (Hz)
-180
2
10
3
10
4
10
5
10
OFFSET FREQUENCY (Hz)
[1] Phase Noise Floor vs Offset Frequency with varying Ref Power Level
[2] Fin= 7000 MHz @ 0 dBm, Ref Frequency = 100 MHz, N = 70
[3] Phase Noise Floor remains constant beyond 100 kHz offset frequency
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6-2
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Phase Noise Floor [1][2][3]
Ref = Square Wave @ 5 dBm, Vcc = 5V
-100
-100
-110
-110
-120
SSB PHASE NOISE (dBc/Hz)
6
SSB PHASE NOISE (dBc/Hz)
Phase Noise Floor [1][2][3]
Ref = Sine Wave @ 5 dBm, Vcc = 5V
+25C
+85C
-45C
-130
-140
-150
-160
-170
-180
2
10
-120
-140
-150
-160
-170
3
4
10
10
-180
2
10
5
10
OFFSET FREQUENCY (Hz)
3
10
4
10
5
10
OFFSET FREQUENCY (Hz)
Phase Noise Floor vs Offset Frequency
with varying Fin @ 0 dbm, Ref = 100 MHz
Square Wave @ 5 dBm, Vcc = 5V [3]
-100
SSB PHASE NOISE (dBc/Hz)
PLL - INTEGER-n synthesizer - SMT
+25C
+85C
-45C
-130
-110
1000 MHz
7000 MHz
-120
-130
-140
-150
-160
-170
-180
2
10
3
10
4
10
5
10
OFFSET FREQUENCY (Hz)
[1] Phase Noise Floor vs Offset Frequency over temperature
[2] Fin= 7000 MHz @ 0 dBm, Ref Frequency = 100 MHz, N = 70
[3] Phase Noise Floor remains constant beyond 100 kHz offset frequency
6-3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Typical Supply Current vs. Vcc
Absolute Maximum Ratings
RF Input (Vcc= +5V)
+10 dBm
Supply Voltage (Vcc)
+5.5V
Vcc (Vdc)
Icc (mA)
4.75
294
Logic Inputs
-0.5V to (0.5V + Vcc)
5.00
310
Junction Temperature (Tc)
135 °C
5.25
342
Continuous Pdiss (T = 85 °C)
(derate 78 mW/° C above 85 °C)
3.9 W
Thermal Resistance
(Junction to ground paddle)
12.90 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Note: HMC698LP5 will work over full voltage range above.
Typical DC Characteristics @ Vcc = +5V
Symbol
Characteristics
Icc
+25C
Units
Min.
Typ.
Max.
Power Supply
Current
280
310
340
mA
Voh
Output High
Voltage, (NU, ND)
5
5
5
V
Vol
Output Low
Voltage, (NU, ND)
2.9
3.0
3.1
V
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
PLL - INTEGER-n synthesizer - SMT
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
6-4
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Outline Drawing
PLL - INTEGER-n synthesizer - SMT
6
6-5
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST
BE SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC698LP5
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
[1]
HMC698LP5(E)
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
[2]
Package Marking [3]
H698
XXXX
H698
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Pin Description
Pin Number
Function
Description
Interface Schematic
Pulsed output.
1
LD
Average “LOW” = UNLOCKED.
Average “HIGH” = LOCKED
CMOS compatible input control bit
2
INV
Logic “LOW” = NORMAL
Logic “HIGH” = INVERT
4, 5, 18, 25
Vcc1, Vcc3,
Vcc2, Vcc_pd
Supply Voltage 5V ±0.25V
9 - 14
N0 - N5
CMOS compatible control input bit 0 (LSB) - 5
15
FIN
(These pins are AC coupled and must be DC Blocked externally.)
Frequency Input
16
NFIN
Frequency Input Complement
CMOS compatible
22, 23
S1, S0
6
PLL - INTEGER-n synthesizer - SMT
PFD INVERT function
Control Input
bit 0 (LSB) -1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6-6
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Pin Description (Continued)
Pin Number
Function
28
REF
Description
Interface Schematic
Reference Input
Reference Input Complement
PLL - INTEGER-n synthesizer - SMT
6
6-7
(These pins are AC coupled and must be DC Blocked externally.)
27
NREF
30
ND
Down Output
31
NU
Up Output
3, 6 - 8, 17,
19 - 21, 24,
26, 29, 32
N/C
No Connection. These pins may be connected to RF/DC ground.
Performance will not be affected.
Ground
Paddle
GND
Package bottom has an exposed ground paddle that must be
connected to RF/DC ground
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
HMC698LP5(E) Programming Truth Table
N Counter
N Counter
Decimal Set
Swallow
S Counter
Swallow S
Decimal Set
(LSB)
N0
N1
N2
N3
N4
N5
(LSB)
S0
S1
12
3
2
0
0
0
1
0
0
0
0
0
0
13
3
2
1
1
0
1
0
0
0
0
1
0
14
3
2
2
2
0
1
0
0
0
0
0
1
15
3
2
3
3
0
1
0
0
0
0
1
1
16
4
3
0
0
1
1
0
0
0
0
0
0
17
4
3
1
1
1
1
0
0
0
0
1
0
18
4
3
2
2
1
1
0
0
0
0
0
1
19
4
3
3
3
1
1
0
0
0
0
1
1
20
5
4
0
0
0
0
1
0
0
0
0
0
21
5
4
1
1
0
0
1
0
0
0
1
0
22
5
4
2
2
0
0
1
0
0
0
0
1
23
.
.
.
5
.
.
.
4
.
.
.
3
.
.
.
3
.
.
.
0
.
.
.
0
.
.
.
1
.
.
.
0
.
.
.
0
.
.
.
0
.
.
.
1
.
.
.
1
.
.
.
252
63
62
0
0
0
1
1
1
1
1
0
0
253
63
62
1
1
0
1
1
1
1
1
1
0
254
63
62
2
2
0
1
1
1
1
1
0
1
255
63
62
3
3
0
1
1
1
1
1
1
1
256
64
63
0
0
1
1
1
1
1
1
0
0
257
64
63
1
1
1
1
1
1
1
1
1
0
258
64
63
2
2
1
1
1
1
1
1
0
1
259
64
63
3
3
1
1
1
1
1
1
1
1
N = INT (n/P)
S = MOD (n/P)
Where: n = Desired division ratio
P = Prescaler value = 4
N = Counter N value (counter decimal set is N - 1)
HMC698LP5(E) Programming Truth Table, Non-Continuous Division Ratios
Division
Ratio n
N Counter
N Counter
Decimal Set
Swallow
S Counter
Swallow S
Decimal Set
(LSB)
N0
N1
N2
N3
N4
N5
(LSB)
S0
S1
8
2
1
0
0
1
0
0
0
0
0
0
0
9
2
1
1
1
1
0
0
0
0
0
1
0
10
2
1
2
2
1
0
0
0
0
0
0
1
N = INT (n/P)
S = MOD (n/P)
Where: n = Desired division ratio
P = Prescaler value = 4
N = Counter N value (counter decimal set is N - 1)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
PLL - INTEGER-n synthesizer - SMT
Division
Ratio n
6-8
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Evaluation PCB Circuit
PLL - INTEGER-n synthesizer - SMT
6
6-9
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Evaluation PCB
The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50
ohm impedance while the package backside ground paddle should be connected directly to the ground plane similar
to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
List of Materials for
Evaluation PCB 122625
[1]
Item
Description
J1 - J4
PC Mount SMA RF Connector
J5 - J6
2mm DC Header
C1 - C5, C8 - C10
1000 pF Capacitor, 0402 Pkg
C6 - C7
100 pF Capacitor, 0402 Pkg
C15
1000 pF Capacitor, 0603 Pkg
C16
4.7 μF Tantalum Capacitor Case A
D
LED Green, 0603 Pkg
R1
10k Ohm, Resistor, Array
R8, R9
10k Ohm, Resistor, 0402 Pkg.
R11
1k Ohm, Resistor, 0402 Pkg.
R12
100 Ohm, Resistor, 0402 Pkg.
U1
HMC698LP5(E) Synthesizer
PCB [2]
116106 Eval Board
Evaluation PCB Truth Table
(see Programming Truth Table)
Note: 0 = Jumper Installed.
1 = Jumper Not Installed.
Note: The evaluation PCB for the HMC698LP5 contains
10K Ohm pull up resistors for each of the 9 control inputs.
Programming the 251 distinct division ratios consists of
installing or removing jumpers N0 through N5 and S0, S1.
PLL - INTEGER-n synthesizer - SMT
6
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6 - 10
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Typical PLL Application Circuit using HMC698LP5
PLL application shown for a 13.0 GHz Fout. Contact HMC to discuss your specific application.
PLL - INTEGER-n synthesizer - SMT
6
6 - 11
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC698LP5 / 698LP5E
v03.0709
7 GHz INTEGER N SYNTHESIZER
(N = 12 - 259)
Typical Application
Showing Spurious Performance
Typical Application
13 GHz Measured Phase Noise [1]
-110
-120
-130
MEASURED
CALCULATED
-140
-150
-160
6
-170
-180
2
10
3
4
10
10
5
10
6
10
7
10
OFFSET FREQUENCY (Hz)
[1] Phase Noise Floor remains constant beyond 100 kHz offset
frequency. Measured phase noise using Agilent 5500 with 2 unit
measurement technique and corresponding calculated phase noise
floor.
CMOS/TTL Input Characteristics
Maximum Input Logic “0” Voltage (VIL MAXIMUM) = 1.1V @ 1 µA.
Minimum Input Logic “1” Voltage (VIH MINIMUM) = 1.8V @ 50 µA.
Input IV characteristics for the logic inputs (N0 - N5, S0 - S1) are shown below:
0.4
V
Input Current (mA)
V
IL MAX
0.3
IH MIN
0.2
0.1
0
-0.1
0
1
2
3
4
5
PLL - INTEGER-n synthesizer - SMT
SSB PHASE NOISE (dBc/Hz)
-100
Input Voltage (V)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6 - 12
工商网监
湘ICP备2023018690号
