HMC812LC4
v03.0614
Features
The HMC812LC4 is ideal for:
Wide Bandwidth: 5 - 30 GHz
• Point-to-Point Radio
Excellent Linearity: +28 dBm Input IP3
• VSAT Radio
High Power Handling: +25 dBm Input P1dB
• Test Instrumentation
Wide Attenuation Range: 30 dB
• Microwave Sensors
24 Lead Ceramic 4x4 mm SMT Package: 16mm²
TE
Typical Applications
• Military, ECM & Radar
Functional Diagram
General Description
LE
The HMC812LC4 is an absorptive Voltage Variable
Attenuator (VVA) which operates from 5 - 30 GHz
and is ideal in designs where an analog DC control
signal must be used to control RF signal levels over a
30 dB amplitude range. It features two shunt-type
attenuators which are controlled by two analog voltages, Vctrl1 and Vctrl2. Optimum linearity performance of the attenuator is achieved by first varying
Vctrl1 of the 1st attenuation stage from -3V to 0V
with Vctrl2 fixed at -3V. The control voltage of the
2nd attenuation stage, Vctrl2, should then be varied
from -3V to 0V, with Vctrl1 fixed at 0V. The HMC812LC4
is housed in a RoHS compliant 4x4 mm QFN leadless ceramic package
B
SO
ATTENUATORS - ANALOG - SMT
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
O
However, if the Vctrl1 and Vctrl2 pins are connected
together it is possible to achieve the full analog attenuation range with only a small degradation in input
IP3 performance. Applications include AGC circuits
and temperature compensation of multiple gain stages
in microwave point-to-point and VSAT radios.
Electrical Specifications, TA = +25° C, 50 Ohm system
Parameter
Typ.
Max.
Units
2
3
4
dB
dB
dB
Attenuation Range
30
dB
Input Return Loss
12
dB
Output Return Loss
8
dB
Input Power for 1 dB Compression (any attenuation)
25
dBm
Input Third Order Intercept
(Two-tone Input Power = 10 dBm Each Tone)
28
dBm
Insertion Loss
1
Min.
5 - 16 GHz
16 - 24 GHz
24 - 30 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC812LC4
v03.0614
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
0
-5
-10
ATTENUATION (dB)
0
-10
-3.0 V
-1.8 V
-1.4 V
-0.8 V
0.0 V
-20
-3.0 V
-2.0 V
-1.6 V
-1.0 V
0.0 V
-40
-25
-50
2
6
10
14
18
22
26
30
2
FREQUENCY (GHz)
6
10
14
18
22
26
30
FREQUENCY (GHz)
Attenuation vs. Vctrl2
Over Temperature @ 10 GHz, Vctrl1 = 0V
LE
Attenuation vs. Vctrl1
Over Temperature @ 10 GHz, Vctrl2 = -3V
0
0
-5
-6
-9
B
SO
-3
ATTENUATION (dB)
-30
TE
-15
-20
+25 C
+85 C
-40 C
-12
-15
-3
-2.5
-2
-1.5
-1
-0.5
-15
-20
-25
-30
-35
0
-3
-2.5
-2
Vctrl1 (V)
-1.5
-1
-0.5
0
Vctrl2 (V)
Input Return Loss
Vctrl1 = Variable, Vctrl2 = -3V
O
Attenuation vs. Pin @ 10 GHz
Vctrl1 = Variable, Vctrl2 = -3V
+25 C
+85 C
-40 C
-10
ATTENUATORS - ANALOG - SMT
Attenuation vs. Frequency over Vctrl
Vctrl1 = 0V, Vctrl2 = Variable
ATTENUATION (dB)
ATTENUATION (dB)
Attenuation vs. Frequency over Vctrl
Vctrl1 = Variable, Vctrl2 = -3V
0
0
RETURN LOSS (dB)
ATTENUATION (dB)
-3
-6
-9
-12
-3.0 V
-1.8 V
-1.4 V
-15
-10
-20
-3.0 V
-1.6 V
0.0 V
-30
-0.8 V
0.0 V
-18
-40
0
3
6
9
12
INPUT POWER (dBm)
15
18
2
6
10
14
18
22
26
30
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC812LC4
v03.0614
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
Output Return Loss
Vctrl1 = Variable, Vctrl2 = -3V
Input Return Loss
Vctrl1 = 0V, Vctrl2 = Variable
RETURN LOSS (dB)
-10
-3.0 V
-1.6 V
0.0 V
-20
-20
-3.0 V
-1.6 V
0.0 V
-30
-40
2
6
10
14
18
22
26
30
2
FREQUENCY (GHz)
6
10
14
18
22
26
30
FREQUENCY (GHz)
Input IP3 vs Input Power @ 10 GHz
Vctrl1 = Variable, Vctrl2 = -3V
LE
Output Return Loss
Vctrl1 = 0V, Vctrl2 = Variable
60
0
-20
B
SO
-10
IP3 (dBm)
50
-3.0 V
-1.4 V
0.0 V
-30
2
6
10
14
18
22
26
40
30
-3.0 V
-2.6 V
-2.2 V
-1.8 V
0.0 V
20
10
0
30
3
6
9
12
15
18
SINGLE TONE INPUT POWER (dBm)
Input IP3 vs. Input Power Over Frequency
Vctrl1 = -2.2V, Vctrl2 = -3V (Worst Case IP3)
Input IP3 vs. Input Power Over Temperature
@ 10 GHz, Vctrl1 = -2.2V, Vctrl2 = -3V
O
FREQUENCY (GHz)
30
30
IP3 (dBm)
35
IP3 (dBm)
35
5 GHz
10 GHz
20 GHz
30 GHz
25
+25 C
+85 C
-40 C
25
20
20
0
3
6
9
12
15
SINGLE TONE INPUT POWER (dBm)
3
-10
TE
RETURN LOSS (dB)
0
-30
RETURN LOSS (dB)
ATTENUATORS - ANALOG - SMT
0
18
0
3
6
9
12
15
18
SINGLE TONE INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC812LC4
v03.0614
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
Attenuation vs. Vctrl over Temperature
@ 10 GHz, Vctrl1 = Vctrl2
Attenuation vs. Frequency over Vctrl
Vctrl1 = Vctrl2
0
ATTENUATION (dB)
-20
-3.0 V
-1.8 V
-1.4 V
-0.8 V
0.0 V
-40
-50
-20
+25 C
+85 C
-40 C
-30
-40
2
6
10
14
18
22
26
-3
30
-2.5
-1.5
-1
-0.5
0
LE
Attenuation vs. Input Power over Vctrl
Vctrl1 = Vctrl2
0
Input Return Loss, Vctrl1 = Vctrl2
0
-20
-30
B
SO
-10
-3.0 V
-1.8 V
-1.4 V
-40
-50
0
3
6
-0.8 V
0.0 V
9
12
15
-10
-20
-30
-3.0 V
-1.6 V
0.0 V
-40
2
18
6
10
14
18
22
26
30
FREQUENCY (GHz)
INPUT POWER (dBm)
Input IP3 vs. Input Power Over
Vctrl @ 10 GHz, Vctrl1 = Vctrl2
O
Output Return Loss, Vctrl1 = Vctrl2
0
60
50
-10
40
IP3 (dBm)
RETURN LOSS (dB)
-2
CONTROL VOLTAGE (V)
FREQUENCY (GHz)
ATTENUATION (dB)
-10
TE
-30
RETURN LOSS (dB)
ATTENUATION (dB)
-10
ATTENUATORS - ANALOG - SMT
0
-20
30
20
-3.0 V
-1.6 V
0.0 V
-3.0 V
-2.6 V
-2.2 V
-1.8 V
0.0 V
10
-30
0
2
6
10
14
18
FREQUENCY (GHz)
22
26
30
0
3
6
9
12
15
18
SINGLE TONE INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC812LC4
v03.0614
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
Control Voltages
RF Input Power
+30 dBm
Vctrl1
-3 to 0V @ 10 µA
Control Voltage Range
+1 to -5V
Vctrl2
-3 to 0V @ 10 µA
Channel Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 16.4 mW/ °C above 85 °C)
1.07 W
Thermal Resistance
(Channel to ground paddle)
61 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
TE
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
B
SO
LE
Outline Drawing
O
ATTENUATORS - ANALOG - SMT
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA.
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER NICKEL.
3. DIMENSIONS ARE IN INCHES (MILLIMETERS).
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM – C –
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC812LC4
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H812
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC812LC4
v03.0614
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
Pin Descriptions
Description
1, 2, 6 - 8,
11 - 13, 17 - 24
N/C
These pins are not connected internally, however these
pins must be connected to RF/DC ground externally.
3, 5, 14, 16
GND
These pins and the exposed ground paddle must be connected to RF/DC ground.
4
RFIN
Interface Schematic
RFOUT
9
Vctrl1
Control Voltage 1
B
SO
15
LE
This pad is DC coupled and matched to 50 Ohms.
A blocking capacitor is required if RF line potential
is not equal to 0V.
Vctrl2
Control Voltage 2
O
10
ATTENUATORS - ANALOG - SMT
Function
TE
Pin Number
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC812LC4
v03.0614
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
TE
LE
B
SO
O
ATTENUATORS - ANALOG - SMT
Application Circuit
7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC812LC4
v03.0614
GaAs MMIC VOLTAGE-VARIABLE
ATTENUATOR, 5 - 30 GHz
ATTENUATORS - ANALOG - SMT
B
SO
LE
TE
Evaluation PCB
O
List of Materials for Evaluation PCB 123768 [1]
Item
Description
J1, J2
2.9 mm PC Mount RF Connector
J3, J4
DC Pin
C1, C2
100 pF Capacitor, 0402 Pkg.
C3, C4
1000 pF Capacitor, 0402 Pkg.
C5, C6
4.7 µF Capacitor, CASE A
U1
HMC812LC4 Analog VVA
PCB [2]
123766 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price,2 delivery,
andDrive,
to place
orders: AnalogMA
Devices,
For price,
delivery
andDevices
to place
orders:
Hittite
Microwave
Elizabeth
Chelmsford,
01824Inc.,
responsibility
is assumed
by Analog
for its use,
nor for any
infringements
of patents orCorporation,
other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
工商网监
湘ICP备2023018690号
