125329-HMC785LP4E

HMC785LP4E v03.1111 Mixers - SINGLE & DOUBLE BALANCED - SMT 10 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Typical Applications Features The HMC785LP4E is Ideal for: High Input IP3: +38 dBm • Cellular/3G & LTE/WiMAX/4G 8 dB Conversion Loss @ 0 dBm LO • Basestations & Repeaters Optimized for Low Side LO Input • GSM, CDMA & OFDM Adjustable Supply Current • Transmitters and Receivers 24 Lead 4x4mm SMT Package: 16mm2 Functional Diagram General Description The HMC785LP4E is a high dynamic range passive MMIC mixer with integrated LO amplifier in a 4x4 SMT QFN package covering 1.7 to 2.2 GHz. Excellent input IP3 performance of +38 dBm for down conversion is provided for 3G & 4G GSM/CDMA applications at an LO drive of 0 dBm. With an input 1 dB compression of +26 dBm, the RF port will accept a wide range of input signal levels. Conversion loss is 8 dB typical. Up to 300 MHz IF frequency response will satisfy GSM/CDMA transmit or receive frequency plans. The HMC785LP4E is optimized for low side LO frequency plans for 1.7 - 2.2 GHz RF Band and is pin for pin compatible with the HMC685LP4E Electrical Specifications, TA = +25° C, LO = 0 dBm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V * Parameter Min. Frequency Range, RF Typ. Max. 1.7 - 2.2 Units GHz Frequency Range, LO 1.5 - 2.2 GHz Frequency Range, IF 50 - 300 MHz Conversion Loss 8 Noise Figure (SSB) 8 IP3 (Input) 36 dBm 1 dB Compression (Input) 26 dBm 30 dB dB LO to RF Isolation 18 10 dB dB LO to IF Isolation 18 25 RF to IF Isolation 25 39 dB -6 to +6 dBm LO Drive Input Level (Typical) Supply Current Icc total 160 180 mA * Unless otherwise noted all measurements performed as downconverter with low side LO & IF = 200 MHz. 10 - 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Downconverter Performance Conversion Gain vs. LO Drive Conversion Gain vs. Temperature -5 -7 -8 -9 -10 -11 1.5 -6 dBm -3 dBm 0 dBm +3 dBm +6 dBm -6 -7 -8 -9 -10 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 -11 1.5 2.4 1.6 1.7 RF FREQUENCY (GHz) -6 -6 CONVERSION GAIN (dB) CONVERSION GAIN (dB) -5 -7 -8 160 mA 140 mA 120 mA -10 1.6 1.7 1.8 1.9 2.1 2.2 2.3 -9 2.2 2.3 2.4 2.0 V 2.5 V 3.0 V -11 1.5 2.4 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 RF FREQUENCY (GHz) IF Bandwidth (LO = 1.7 GHz) Conversion Gain vs. IF Frequency 0 -5 -6 -10 RESPONSE (dB) CONVERSION GAIN (dB) 2.1 -8 RF FREQUENCY (GHz) -7 -8 -9 100 MHz 200 MHz 300 MHz -10 -11 1.5 2 -7 -10 2 1.9 Conversion Gain vs. G_Bias Voltage -5 -9 1.8 RF FREQUENCY (GHz) Conversion Gain vs. Icc -11 1.5 10 -20 -30 Mixers - SINGLE & DOUBLE BALANCED - SMT +25 C +85 C -40 C -6 CONVERSION GAIN (dB) CONVERSION GAIN (dB) -5 IF Return Loss Conversion Gain -40 -50 1.6 1.7 1.8 1.9 2 2.1 RF FREQUENCY (GHz) 2.2 2.3 2.4 0 0.1 0.2 0.3 0.4 0.5 IF FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Downconverter Performance Input IP3 vs. LO Drive [1] 45 40 40 35 35 IP3 (dBm) 45 30 +25 C +85 C -40 C 25 15 1.5 30 -6 dBm -3 dBm 0 dBm +3 dBm +6 dBm 25 20 20 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 15 1.5 2.4 1.6 1.7 RF FREQUENCY (GHz) 45 40 40 35 35 IP3 (dBm) IP3 (dBm) 1.9 2 2.1 2.2 2.3 2.4 2.2 2.3 2.4 2.2 2.3 2.4 Input IP3 vs. G_Bias Voltage [1] 45 30 160 mA 140 mA 120 mA 25 30 2.0 V 2.5 V 3.0 V 25 20 15 1.5 1.8 RF FREQUENCY (GHz) Input IP3 vs. Icc [1] 20 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 15 1.5 2.4 1.6 1.7 RF FREQUENCY (GHz) 1.8 1.9 2 2.1 RF FREQUENCY (GHz) Input P1dB vs. Temperature Input IP3 vs. IF Frequency [1] 45 35 +25 C +85 C -40 C 40 30 P1dB (dBm) 35 IP3 (dBm) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 IP3 (dBm) Input IP3 vs. Temperature [1] 30 100 MHz 200 MHz 300 MHz 25 25 20 20 15 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 RF FREQUENCY (GHz) 15 1.5 1.6 1.7 1.8 1.9 2 2.1 RF FREQUENCY (GHz) [1] Two-tone input power = +9 dBm each tone, 1 MHz spacing. 10 - 3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Downconverter Performance +2RF -2LO Response vs. Temperature [1] +2RF -2LO Response vs. LO Drive [1] 85 +25 C +85 C -40 C 75 70 65 60 55 50 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 75 65 60 55 1.7 1.8 RF FREQUENCY (GHz) 95 95 +3RF-3LO RESPONSE (dBc) +3RF-3LO RESPONSE (dBc) 100 90 85 80 +25 C +85 C -40 C 70 1.8 1.9 2 2.1 2.1 2.2 2.3 2.4 2.2 2.3 90 85 80 -6 dBm -3 dBm 0 dBm +3 dBm +6 dBm 75 70 65 1.7 2.4 1.8 1.9 RF FREQUENCY (GHz) 2 2.1 2.2 2.3 2.4 RF FREQUENCY (GHz) Return Loss Isolation 0 0 -5 -10 ISOLATION (dB) RETURN LOSS (dB) 2 +3RF -3LO Response vs. LO Drive [1] 100 65 1.7 1.9 RF FREQUENCY (GHz) +3RF -3LO Response vs. Temperature [1] 75 10 70 50 1.6 2.4 -6 dBm -3 dBm 0 dBm +3 dBm +6 dBm 80 -10 -15 -20 RF LO -25 RF/IF LO/RF LO/IF -20 -30 Mixers - SINGLE & DOUBLE BALANCED - SMT 80 +2RF-2LO RESPONSE (dBc) +2RF-2LO RESPONSE (dBc) 85 -40 -50 -30 1 1.2 1.4 1.6 1.8 2 2.2 2.4 FREQUENCY (GHz) 2.6 2.8 3 -60 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 RF FREQUENCY (GHz) [1] Referenced to RF Input Power at 0 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Upconverter Performance [1] Conversion Gain vs. LO Drive Conversion Gain vs. Temperature -5 CONVERSION GAIN (dB) +25 C +85 C -40 C -6 -7 -8 -9 -10 -11 1.5 -6 dBm -3 dBm 0 dBm +3 dBm +6 dBm -6 -7 -8 -9 -10 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 -11 1.5 2.4 1.6 1.7 RF FREQUENCY (GHz) 160 mA 140 mA 120 mA CONVERSION GAIN (dB) CONVERSION GAIN (dB) 2 2.1 2.2 2.3 2.4 -5 -6 -7 -8 -9 -10 -6 -7 -8 -9 2.0 V 2.5 V 3.0 V -10 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 -11 1.5 2.4 1.6 1.7 RF FREQUENCY (GHz) -6 -5 RETURN LOSS (dB) 0 -7 -8 100 MHz 200 MHz 300 MHz -10 1.9 2 2.1 2.2 2.3 2.4 Return Loss -5 -9 1.8 RF FREQUENCY (GHz) Conversion Gain vs. IF Frequency -11 1.5 1.9 Conversion Gain vs. G_Bias Voltage -5 -11 1.5 1.8 RF FREQUENCY (GHz) Conversion Gain vs. Icc CONVERSION GAIN (dB) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 CONVERSION GAIN (dB) -5 -10 -15 -20 RF LO IF -25 -30 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 RF FREQUENCY (GHz) 2.4 0 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) [1] See Upconverter Evaluation PCB and Schematic 10 - 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Upconverter Performance [1] Input IP3 vs. LO Drive [2] 45 45 40 40 35 35 30 +25 C +85 C -40 C 25 30 -6 dBm -3 dBm 0 dBm +3 dBm +6 dBm 25 20 15 1.5 10 20 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 15 1.5 2.4 1.6 1.7 RF FREQUENCY (GHz) 45 45 40 40 35 35 30 160 mA 140 mA 120 mA 25 2 2.1 2.2 2.3 2.4 2.2 2.3 2.4 2.2 2.3 2.4 30 2.0 V 2.5 V 3.0 V 25 20 20 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 15 1.5 2.4 1.6 1.7 RF FREQUENCY (GHz) 1.8 1.9 2 2.1 RF FREQUENCY (GHz) Input IP3 vs. IF Frequency [2] Input P1dB vs. Temperature 45 35 40 +25 C +85 C -40 C 30 P1dB (dBm) 35 IP3 (dBm) 1.9 Input IP3 vs. G_Bias Voltage [2] IP3(dBm) IP3(dBm) Input IP3 vs. Icc [2] 15 1.5 1.8 RF FREQUENCY (GHz) 30 100 MHz 200 MHz 300 MHz 25 25 Mixers - SINGLE & DOUBLE BALANCED - SMT IP3(dBm) IP3(dBm) Input IP3 vs. Temperature [2] 20 20 15 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 RF FREQUENCY (GHz) 15 1.5 1.6 1.7 1.8 1.9 2 2.1 RF FREQUENCY (GHz) [1] See Upconverter Evaluation PCB and Schematic [2] Two-tone input power = +9 dBm each tone, 1 MHz spacing. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 6 HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Typical Supply Current vs. Vcc Icc vs. R9 180 Mixers - SINGLE & DOUBLE BALANCED - SMT 160 Icc (mA) 10 Vcc1, 2, 3 (V) Icc total (mA) 4.75 147 5.00 160 5.25 173 Absolute Maximum Ratings 140 Vcc1-3 120 100 175 200 225 250 275 300 325 R9 (Ohms) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 5.5 Vdc RF Input Power (Vcc1, 2, 3 = +5V) +23 dBm IF Input Power (Vcc1, 2, 3 = +5V) +20 dBm LO Drive (Vcc1, 2, 3 = +5V) +10 dBm Junction Temperature 125 °C Continuous Pdiss (T=85 °C) (derate 27 mW/°C above 85 °C ) 1.08 W Thermal Resistance (junction to ground paddle) 37.04 °C/W Storage Temperature -65 to 150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY. 3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.25mm MAX. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC785LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [1] Package Marking [2] H785 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX 10 - 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Pin Descriptions Pin Number Description N/C No connection. These pins may be connected to RF ground. Performance will not be affected. 2, 5, 15, 17 GND Package bottom must be connected to RF/DC ground. 3 RF This pin is matched single-ended to 50 Ohms and DC shorted to ground through a balun. 4 TAP Center tap of secondary side of the internal RF balun. Short to ground with zero Ohms close to the IC. 8, 10, 24 Vcc1, Vcc2, Vcc3 Power supply voltage. See application circuit for required external components. 9 LO_BIAS LO buffer current adjustment pin. Adjust the LO buffer current through the external resistor R9 shown in the application circuit (connect 200 Ohms for nominal operation). This adjustment allows for a trade-off between power dissipation and linearity performance of the converter. 16 LO This pin is matched single-ended 50 Ohm and DC shorted to ground through a balun. 19 G_BIAS External bias with a nominal value of 2.5V. See application circuit for recommended external components. G_Bias can be set to between 0 and 5Vdc. This adjustment allows for a trade off between conversion loss and linearity performance of the converter (see figures CG, IP3 vs. G-Bias). The G_bias pin has an internal 15 KOhms resistance to ground and 15 KOhms to Vcc. Internal resistive divider sets 2.5 V for G_bias and can be changed externally. 21, 22 IFN, IFP Differential IF input / output pins matched to differential 50 Ohms. For applications not requiring operation to DC an off chip DC blocking capacitor should be used. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mixers - SINGLE & DOUBLE BALANCED - SMT Function 1, 6, 7, 11 - 14, 18, 20, 23 10 - 8 HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Evaluation PCB - Downconverter Mixers - SINGLE & DOUBLE BALANCED - SMT 10 List of Materials for Evaluation PCB 125329 [1] Item Description J1 - J3 SMA Connector J4 - J7 DC Pin C7, C8 10 nF Capacitor, 0402 Pkg. C10, C12, C16, C18 1 nF Capacitor, 0402 Pkg. C11, C15, C17, C21 0.1 µF Capacitor, 0402 Pkg. C19 22 pF Capacitor, 0402 Pkg. C20 4.7 µF Case A, Tantalum R2 - R4, R7, R8 0 Ohm Resistor, 0402 Pkg. R9 200 Ohm Resistor, 0603 Pkg. T1 1:1 Transformer - Tyco MABA CT0039 U1 HMC785LP4E PCB [2] 118162 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR 10 - 9 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Application Circuit - Downconverter Mixers - SINGLE & DOUBLE BALANCED - SMT 10 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 10 HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Evaluation PCB - Upconverter Mixers - SINGLE & DOUBLE BALANCED - SMT 10 List of Materials for Evaluation PCB 125354 [1] Item Description J1 - J3 SMA Connector J4 - J7 DC Pin C7, C8 10 nF Capacitor, 0402 Pkg. C10, C12, C16, C18 1 nF Capacitor, 0402 Pkg. C11, C15, C17, C21 0.1 µF Capacitor, 0402 Pkg. C19 22 pF Capacitor, 0402 Pkg. C20 4.7 µF Case A, Tantalum C22 1 pF Capacitor, 0603 Pkg. C23 1.8 pF Capacitor, 0402 Pkg. R2 - R4, R7 0 Ohm Resistor, 0402 Pkg. R9 200 Ohm Resistor, 0603 Pkg. T1 1:1 Transformer - Tyco MABA CT0039 U1 HMC785LP4E PCB [2] 118162 Evaluation PCB The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR 10 - 11 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC785LP4E v03.1111 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 1.7 - 2.2 GHz Application Circuit - Upconverter Mixers - SINGLE & DOUBLE BALANCED - SMT 10 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 12