125658-HMC686LP4E

HMC686LP4 / 686LP4E v05.0509 10 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Typical Applications Features The HMC686LP4(E) is Ideal for: High Input IP3: +34 dBm • Cellular/3G & LTE/WiMAX/4G 7.5 dB Conversion Loss @ 0 dBm LO • Basestations & Repeaters Optimized to High Side LO Input for 0.7 - 1.1 GHz RF Band • GSM, CDMA & OFDM Optimized to Low Side LO Input for 1.4 - 1.5 GHz RF Band Mixers - SINGLE & DOUBLE BALANCED - SMT • Transmitters and Receivers Adjustable Supply Current 24 Lead 4x4mm SMT Package: 16mm2 Functional Diagram General Description The HMC686LP4(E) is a high dynamic range passive MMIC mixer with integrated LO amplifier in a 4x4 SMT QFN package covering 0.7 to 1.1 GHz. Excellent input IP3 performance of +34 dBm for down conversion is provided for 3G & 4G GSM/CDMA applications at an LO drive of 0 dBm. With an input 1 dB compression of +25 dBm, the RF port will accept a wide range of input signal levels. Conversion loss is 7.5 dB typical. The DC to 500 MHz IF frequency response will satisfy GSM/CDMA transmit or receive frequency plans. The HMC686LP4(E) is optimized to high side LO frequency plans for 0.7 - 1.1 GHz RF Band and is pin for pin compatible with the HMC684LP4(E) which is a 0.7 - 1.0 GHz converter optimized for low side LO. The HMC686LP4(E) is optimized to low side LO frequency plans for 1.4 - 1.5 GHz RF LTE band applications. Electrical Specifications, TA = +25° C, LO = 0 dBm, Vcc1, 2, 3, = +5V Nominal Supply Parameter Min. Icc = 105 mA [1] Icc = 80 mA [1] Icc = 60 mA [1] Typ. Typ. Typ. Max. Icc = 120mA [2] Min. Typ. Max. Units Frequency Range, RF 0.7 - 1.1 1.4 - 1.5 GHz Frequency Range, LO 0.85 - 1.25 1.1 - 1.5 GHz LO Injection Type High Side Low Side Frequency Range, IF DC to 500 Conversion Loss 7.5 Noise Figure (SSB) 9.5 50 - 250 MHz 7.5 7.5 8 10 7.5 7.5 7.5 8 dB dB 24 26 28 20 36 dB dB LO to RF Isolation 18 LO to IF Isolation 30 41 41 42 28 39 RF to IF Isolation 27 36 36 35 27 38 dB 34 32.5 31.5 32 dBm IP3 (Input) 1 dB Compression (Input) 25 24.5 23.5 25 dBm -3 to +3 -3 to +3 -3 to +3 -3 to +3 dBm Gate Bias Voltage G_BIAS 3.5 3.5 3.5 2.5 Supply Current Icc Total 105 80 60 120 LO Drive Input Level (Typical) 125 V 140 mA [1] Unless otherwise noted all measurements performed for 0.7 - 1.1 GHz RF band as downconverter with high side LO & IF = 150 MHz, Icc = 105 mA, G_Bias = 3.5 V [2] Unless otherwise noted all measurements performed for 1.4 - 1.5 GHz RF LTE band as downconverter with low side LO & IF = 140 MHz 10 - 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 0.7 - 1.1 GHz RF Band Performance Isolation Conversion Gain vs. Temperature 0 RF/IF LO/RF LO/IF -5 -10 +25 C +85 C -40 C -15 -20 0.6 0.7 0.8 -30 -40 -50 0.9 1 1.1 -60 0.6 1.2 0.7 0.8 RF FREQUENCY (GHz) 0.9 1 1.1 1.2 RF FREQUENCY (GHz) Return Loss Conversion Gain vs. LO Drive 0 0 RF LO -5 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 10 -20 -10 -3 dBm 0 dBm +3 dBm -15 -20 0.6 0.7 0.8 0.9 1 -10 -15 -20 -25 1.1 -30 0.4 1.2 0.5 RF FREQUENCY (GHz) 0.6 0.7 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) Input P1dB vs. Temperature IF Bandwidth (LO = 1.1 GHz) 0 30 -5 P1dB (dBm) RESPONSE (dB) 25 -10 -15 20 -20 +25 C +85 C -40 C 15 IF Return Loss Conversion Gain -25 -30 0 0.1 0.2 0.3 IF FREQUENCY (GHz) 0.4 0.5 10 0.6 Mixers - SINGLE & DOUBLE BALANCED - SMT -10 ISOLATION (dB) CONVERSION GAIN (dB) 0 0.7 0.8 0.9 1 1.1 1.2 RF FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 2 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 0.7 - 1.1 GHz RF Band Performance Input IP3 vs. Temperature [1] 40 35 35 IP3 (dBm) 40 30 -3 dBm 0 dBm +3 dBm 25 20 0.6 0.7 0.8 0.9 1 +25 C +85 C -40 C 25 1.1 20 0.6 1.2 0.7 1 1.1 1.2 65 -2RF+2LO RESPONSE (dBc) -2RF+2LO RESPONSE (dBc) 0.9 -2RF +2LO Response vs. LO Drive [2] 65 60 55 +25 C +85 C -40 C 50 45 40 0.6 0.8 RF FREQUENCY (GHz) -2RF +2LO Response vs. Temperature [2] 0.7 0.8 0.9 1 1.1 60 55 50 40 0.6 1.2 -3 dBm 0 dBm +3 dBm 45 0.7 RF FREQUENCY (GHz) 85 85 -3RF+3LO RESPONSE (dBc) 90 80 75 70 +25 C +85 C -40 C 0.7 0.8 0.9 1 0.9 1 1.1 1.2 -3RF +3LO Response vs. LO Drive [2] 90 65 0.8 RF FREQUENCY (GHz) -3RF +3LO Response vs. Temperature [2] 60 0.6 1.1 1.2 RF FREQUENCY (GHz) [1] Two-tone input power = +9 dBm each tone, 1 MHz spacing. 10 - 3 30 RF FREQUENCY (GHz) -3RF+3LO RESPONSE (dBc) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 IP3 (dBm) Input IP3 vs. LO Drive [1] 80 75 70 -3 dBm 0 dBm +3 dBm 65 60 0.6 0.7 0.8 0.9 1 1.1 1.2 RF FREQUENCY (GHz) [2] Referenced to RF Input power at 0 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 0.7 - 1.1 GHz RF Band Performance for Low Power Consumption Conversion Gain vs. G_Bias Voltage Input IP3 vs. G_Bias Voltage [1] 32 -8 -9 -10 0.6 Vcc1, 2, 3 = 3.3 V R9 = 330 Ohms 30 IP3 (dBm) CONVERSION GAIN (dB) 31 -7 1.5 V 2.0 V 2.5 V 3.0 V 3.5 V Vcc1, 2, 3 = 3.3 V R9 = 330 Ohms Icc = 64 mA 0.7 0.8 0.9 1 29 1.5 V 2.0 V 2.5 V 3.0 V 3.5 V 28 27 26 1.1 25 0.6 1.2 0.7 RF FREQUENCY (GHz) 0.9 1 1.1 1.2 1.1 1.2 1.1 1.2 Input IP3 vs. G_Bias Voltage [1] -6 35 34 -7 33 -8 IP3 (dBm) CONVERSION GAIN (dB) 0.8 RF FREQUENCY (GHz) Conversion Gain vs. G_Bias Voltage -9 10 Icc = 64 mA 2.0 V 2.5 V 3.0 V 3.5 V 4.0 V Vcc1, 2, 3 = 5.0 V R9 = 330 Ohms Icc = 110 mA Vcc1, 2, 3 = 5.0 V R9 = 330 Ohms Icc = 110 mA 32 2.0 V 2.5 V 3.0 V 3.5 V 4.0 V 31 30 29 -10 0.6 0.7 0.8 0.9 1 1.1 28 0.6 1.2 0.7 RF FREQUENCY (GHz) 0.9 1 Input IP3 vs. Icc [1] Conversion Gain vs. Icc 35 -6 Vcc1, 2, 3 = 5.0 V G_Bias = 3.5 V -7 30 IP3 (dBm) CONVERSION GAIN (dB) 0.8 RF FREQUENCY (GHz) -8 110 mA 100 mA 90 mA 80 mA 70 mA 60 mA -9 -10 0.6 0.7 0.8 0.9 1 110 mA 100 mA 90 mA 80 mA 70 mA 60 mA 25 Vcc1, 2, 3 = 5.0 V G_Bias = 3.5 V 1.1 1.2 RF FREQUENCY (GHz) 20 0.6 0.7 0.8 0.9 1 Mixers - SINGLE & DOUBLE BALANCED - SMT -6 RF FREQUENCY (GHz) [1] Two-tone input power = +9 dBm each tone, 1 MHz spacing Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 4 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 0.7 - 1.1 GHz RF Band Performance for Low Power Consumption Conversion Gain vs. Temperature, Icc = 60 mA Input IP3 vs. Temperature, Icc = 60 mA [1] 35 -7 IP3 (dBm) 30 -8 +25 C +85 C -40 C 25 -9 -10 0.6 +25 C +85 C -40 C 0.7 0.8 0.9 1 1.1 20 0.6 1.2 0.7 0.8 0.9 1 1.1 1.2 1.1 1.2 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Icc vs. R9 130 120 Vcc1, 2, 3 = 5.0 V Icc (mA) 110 100 90 80 70 60 50 250 300 350 400 450 500 550 600 650 700 750 R9 (Ohms) Typical Upconverter Performance Conversion Gain vs. LO Drive Input IP3 vs. LO Drive [1] 0 40 -5 35 IP3 (dBm) CONVERSION GAIN (dB) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 CONVERSION GAIN (dB) -6 -10 -3 dBm 0 dBm +3 dBm -15 -20 0.6 0.7 0.8 0.9 1 30 -3 dBm 0 dBm +3 dBm 25 1.1 1.2 RF FREQUENCY (GHz) 20 0.6 0.7 0.8 0.9 1 RF FREQUENCY (GHz) [1] Two-tone input power = +9 dBm each tone, 1 MHz spacing 10 - 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 0.7 - 1.1 GHz RF Band Performance for Narrowband High IP3 Upconverter Tune [1] IP3 (dBm) -2 45 40 -4 35 -6 30 -8 -10 25 0.85 0.9 0.95 1 RF FREQUENCY (GHz) 30 -8 -10 0.9 -2 35 -6 30 -8 0.95 1 1 1.05 1.5V 2.5V 3.5V 46 42 38 34 -10 25 0.95 IP3 vs G_BIAS, LO = 1060 MHz [2] IP3 (dBm) IP3 (dBm) -6 G_BIAS = -4 0.9 35 50 40 0.85 -4 RF FREQUENCY (GHz) 0 +25C +85C -40C -2 40 0.85 CONVERSION GAIN (dB) 45 +25C +85C -40C 25 1.05 Conversion Gain and IP3, G_BIAS = 3.5 [2][3] 50 0 CONVERSION GAIN (dB) +25C +85C -40C 50 CONVERSION GAIN (dB) 45 0 IP3 (dBm) 50 Conversion Gain and IP3, G_BIAS = 2.5 [2][3] 30 0.8 1.05 0.85 0.9 0.95 1 RF FREQUENCY (GHz) RF FREQUENCY(GHz) IP3 vs Temperature, G_BIAS = 1.5V, LO = 1060 MHz [2] 50 IP3 (dBm) 46 +25C +85C -40C 42 38 10 Mixers - SINGLE & DOUBLE BALANCED - SMT Conversion Gain and IP3, G_BIAS = 1.5 [2][3] 34 30 0.8 0.85 0.9 0.95 1 RF FREQUENCY (GHz) [1] See Narrowband High IP3 Upconverter Tune Evaluation PCB and schematic. [2] Two-tone input power = +9 dBm each tone, 1 MHz spacing. [3] IF = 120 MHz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 6 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 1.4 - 1.5 GHz RF LTE Band Performance [1] Isolation [2] 0 -7 -10 ISOLATION (dB) -6 -8 -9 +25 C +85 C -40 C -10 -11 -12 1.2 RF/IF LO/RF LO/IF -20 -30 -40 -50 1.3 1.4 1.5 1.6 -60 1.2 1.7 1.3 RF FREQUENCY (GHz) -7 -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 0 -8 -3 dBm 0 dBm +3 dBm -10 -11 -12 1.2 1.5 1.6 1.7 1.6 1.7 Return Loss -6 -9 1.4 RF FREQUENCY (GHz) Conversion Gain vs. LO Drive [2] RF LO -10 -15 -20 -25 1.3 1.4 1.5 1.6 -30 1.2 1.7 1.3 1.4 1.5 FREQUENCY (MHz) RF FREQUENCY (GHz) IF Bandwidth (LO = 1.3 GHz) Input P1dB vs. Temperature [2] 30 0 -5 +25 C +85 C -40 C 28 -10 P1dB (dBm) RESPONSE (dB) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 CONVERSION GAIN (dB) Conversion Gain vs. Temperature [2] IF Return Loss Conversion Gain -15 -20 26 24 -25 22 -30 -35 0.05 0.1 0.15 0.2 0.25 IF FREQUENCY (GHz) 20 1.2 1.3 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) [1] See 1.4 - 1.5 GHz RF LTE Band Evaluation PCB and schematic. [2] G_Bias = +2.5V, IF = 140 MHz 10 - 7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 1.4 - 1.5 GHz RF LTE Band Performance [1] Input IP3 vs. Temperature [2] [3] 35 34 34 33 33 32 31 -3 dBm 0 dBm +3 dBm 30 32 31 30 29 28 1.2 29 1.3 1.4 1.5 1.6 28 1.2 1.7 1.3 RF FREQUENCY (GHz) +2RF-2LO RESPONSE (dBc) +2RF-2LO RESPONSE (dBc) 1.6 1.7 65 60 55 +25 C +85 C -40 C 50 45 1.3 1.4 1.5 1.6 60 55 50 40 1.2 1.7 -3 dBm 0 dBm +3 dBm 45 1.3 RF FREQUENCY (GHz) 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) +3RF -3LO Response vs. Temperature [2] [4] +3RF -3LO Response vs. LO Drive [2] [4] 90 85 +3RF-3LO RESPONSE (dBc) 90 +3RF-3LO RESPONSE (dBc) 1.5 +2RF -2LO Response vs. LO Drive [2] [4] 65 +25 C +85 C -40 C 80 75 70 65 60 1.2 1.4 RF FREQUENCY (GHz) +2RF -2LO Response vs. Temperature [2] [4] 40 1.2 10 +25 C +85 C -40 C 1.3 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) [1] See 1.4 - 1.5 GHz RF LTE Band Evaluation PCB and schematic. [3] Two-tone input power = +9 dBm each tone, 1 MHz spacing -3 dBm 0 dBm +3 dBm 85 80 75 Mixers - SINGLE & DOUBLE BALANCED - SMT 35 IP3 (dBm) IP3 (dBm) Input IP3 vs. LO Drive [2] [3] 70 65 60 1.2 1.3 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) [2] G_Bias = +2.5V, IF = 140 MHz [4] Referenced to RF Input Power at 0 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 8 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 1.4 - 1.5 GHz RF LTE Band Performance [1] Conversion Gain vs. G_Bias Voltage Input IP3 vs. G_Bias Voltage [2] 35 -7 34 IF = 140 MHz IP3 (dBm) -9 1.5 V 2.0 V 2.5 V 3.0 V 3.5 V -10 -12 1.2 32 31 1.5 V 2.0 V 2.5 V 3.0 V 3.5 V 30 29 1.3 1.4 1.5 1.6 28 1.2 1.7 1.3 RF FREQUENCY (GHz) Conversion Gain vs. IF Frequency 1.6 -7 34 G_Bias = 2.5 V G_Bias = 2.5 V 33 -8 -9 90 MHz 140 MHz 200 MHz -10 32 31 90 MHz 140 MHz 200 MHz 30 -11 29 1.3 1.4 1.5 1.6 28 1.2 1.7 1.3 RF FREQUENCY (GHz) 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) Upconverter Performance Conversion Gain vs. Temperature [3] Upconverter Performance Input IP3 vs. Temperature [2] [3] -6 35 34 -7 +25 C +85 C -40 C 33 IP3 (dBm) -8 -9 +25 C +85 C -40 C -10 -12 1.2 1.7 35 IP3 (dBm) CONVERSION GAIN (dB) 1.5 Input IP3 vs. IF Frequency [2] -6 -12 1.2 1.4 RF FREQUENCY (GHz) 32 31 30 29 -11 28 1.3 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) [1] See 1.4 - 1.5 GHz RF LTE Band Evaluation PCB and schematic. [2] Two-tone input power = +9 dBm each tone, 1 MHz spacing 10 - 9 IF = 140 MHz 33 -8 -11 CONVERSION GAIN (dB) Mixers - SINGLE & DOUBLE BALANCED - SMT 10 CONVERSION GAIN (dB) -6 27 1.2 1.3 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) [3] G_Bias = +2.5V, IF = 140 MHz Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz 1.4 - 1.5 GHz RF LTE Band Performance [1] Upconverter Performance Input IP3 vs. LO Drive [2] [3] -6 35 -7 34 -3 dBm 0 dBm +3 dBm -10 32 31 30 -11 29 -12 1.2 1.3 1.4 1.5 1.6 1.7 28 1.2 1.3 RF FREQUENCY (GHz) 1.4 1.5 1.6 1.7 RF FREQUENCY (GHz) Harmonics of LO [4] MxN Spurious @ IF Port [4] nLO Spur @ RF Port nLO LO Freq. (GHz) 1 2 3 4 mRF 0 1 2 3 4 0.75 28 40 40 39 0 xx 41 17 31 40 0.85 25 34 60 33 1 26 0 28 17 46 0.95 23 29 32 31 2 52 50 50 62 58 1.05 23 28 36 26 3 80 66 87 71 87 1.15 26 23 38 34 4 98 97 98 97 98 1.25 33 19 44 34 1.35 39 18 39 38 RF Freq. = 0.9 GHz @ 0 dBm LO Freq. = 1.0 GHz @ 0 dBm All values in dBc below IF power level (-1RF + 1LO). LO = 0 dBm All values in dBc below input LO level measured at RF port Absolute Maximum Ratings Typical Supply Current vs. Vcc RF / IF Input (Vcc1,2,3 = +5V) +23 dBm Vcc1,2,3 (V) Icc Total (mA) LO Drive (Vcc1,2,3 = +5V) +10 dBm 4.75 100 Vcc1,2,3 +5.5V 5.00 105 Channel Temperature 125 °C 5.25 110 Continuous Pdiss (T = 85°C) (derate 19 mW/°C above 85°C) 0.76 W Thermal Resistance (channel to ground paddle) 52 °C/W Storage Temperature -65 to 150 °C Operating Temperature -40 to +85 °C Product will operate over full voltage range shown above. Mixers - SINGLE & DOUBLE BALANCED - SMT -9 10 -3 dBm 0 dBm +3 dBm 33 -8 IP3 (dBm) CONVERSION GAIN (dB) Upconverter Performance Conversion Gain vs. LO Drive [2] [1] See 1.4 - 1.5 GHz RF LTE Band Evaluation PCB and schematic. [2] G_Bias = +2.5V, IF = 140 MHz ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS [3] Two-tone input power = +9 dBm each tone, 1 MHz spacing [4] See 0.7 - 1.1 GHz RF Band Evaluation PCB and schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 10 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Outline Drawing Mixers - SINGLE & DOUBLE BALANCED - SMT 10 10 - 11 NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY. 3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN. 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.25mm MAX. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 9. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC686LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] HMC686LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] Package Marking [3] H686 XXXX H686 XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Pin Descriptions Function Description 1, 6, 7, 11 - 14, 18, 20, 23 N/C No connection. These pins may be connected to RF ground. Performance will not be affected. 2, 5, 15, 17 GND Package bottom must be connected to RF/DC ground. 3 RF This pin is matched single-ended to 50 Ohms and DC shorted to ground through a balun. 4 TAP Center tap of secondary side of the internal RF balun. Short to ground with zero ohms close to the package. 8, 10, 24 Vcc1, Vcc2, Vcc3 Power supply voltage. See application circuit for required external components. 9 LO_BIAS LO buffer current adjustment pin. Adjust the LO buffer current through the external resistor R9 shown in the application circuit (connect 330 Ohms for nominal operation). This adjustment allows for a trade-off between power dissipation and linearity performance of the converter. 16 LO This pin is matched single-ended to 50 Ohms and DC shorted to ground through a balun. 19 G_BIAS External bias. See application circuit for recommended external components. Apply +3.5V for nominal operation at 5V supply voltage. G_Bias can be set to between 0 and 5Vdc. The G_bias pin has an internal 15K ohm resistance to ground. This adjustment allows for a trade off between conversion loss and linearity performance of the converter (see figures CG, IP3 vs. G-Bias). 21, 22 IFN, IFP Differential IF input / output pins matched to differential 50 Ohms. For applications not requiring operation to DC an off chip DC blocking capacitor should be used. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 Mixers - SINGLE & DOUBLE BALANCED - SMT Pin Number 10 - 12 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Evaluation PCB - 0.7 - 1.1 GHz RF Band Mixers - SINGLE & DOUBLE BALANCED - SMT 10 List of Materials for Evaluation PCB 119936 [1] Item Description J1 - J3 SMA Connector J4 - J7 DC Pin C1, C19 22 pF Capacitor, 0402 Pkg. C4 6.8 pF Capacitor, 0402 Pkg. C7, C8 10 nF Capacitor, 0402 Pkg. C10, C12, C16, C18 1 nF Capacitor, 0402 Pkg. C11, C15, C17, C21 0.1 µF Capacitor, 0603 Pkg. C20 4.7 µF Case A, Tantalum R2 - R4 0 Ohm Resistor, 0402 Pkg. R5 68 Ohm Resistor, 0402 Pkg. R9 330 Ohm Resistor, 0603 Pkg. T1 1:1 Transformer - Tyco MABACT0039 U1 HMC686LP4(E) Downconverter PCB [2] 118162 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25R, FR4 10 - 13 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Application Circuit - 0.7 - 1.1 GHz RF Band Mixers - SINGLE & DOUBLE BALANCED - SMT 10 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 14 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Evaluation PCB - 0.7 - 1.1 GHz RF Band, Narrowband High IP3 Upconverter Tune Mixers - SINGLE & DOUBLE BALANCED - SMT 10 List of Materials for Evaluation PCB 122410 [1] Item Description J1 - J3 SMA Connector J4 - J7 DC Pin C1, C19 22 pF Capacitor, 0402 Pkg. C2 4.7 pF Capacitor, 0402 Pkg. C7, C8 10 nF Capacitor, 0402 Pkg. C10, C12, C16, C18 1 nF Capacitor, 0402 Pkg. C11, C15, C17, C21 0.1 µF Capacitor, 0603 Pkg. C20 4.7 µF Case A, Tantalum R1 0 Ohm Resistor, 0402 Pkg. R2 - R4 0 Ohm Resistor, 0402 Pkg. R5 68 Ohm Resistor, 0402 Pkg. R9 330 Ohm Resistor, 0603 Pkg. T1 1:1 Transformer - Tyco MABACT0039 U1 HMC686LP4(E) Downconverter L1 5.6 nH Ind, 0402 Pkg. PCB [2] 118162 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25R, FR4 10 - 15 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Application Circuit - 0.7 - 1.1 GHz RF Band, Narrowband High IP3 Upconverter Tune Mixers - SINGLE & DOUBLE BALANCED - SMT 10 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 16 HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Evaluation PCB - 1.4 - 1.5 GHz RF LTE Band Mixers - SINGLE & DOUBLE BALANCED - SMT 10 List of Materials for Evaluation PCB 125658 [1] Item Description J1 - J3 SMA Connector J4 - J7 DC Pin C1, C19 22 pF Capacitor, 0402 Pkg. C2 2.2 pF Capacitor, 0402 Pkg. C4 6.8 pF Capacitor, 0402 Pkg. C7, C8 10 nF Capacitor, 0402 Pkg. C10, C12, C16, C18 1 nF Capacitor, 0402 Pkg. C11, C15, C17, C21 0.1 µF Capacitor, 0603 Pkg. C20 4.7 µF Case A, Tantalum R2 - R4 0 Ohm Resistor, 0402 Pkg. R5 68 Ohm Resistor, 0402 Pkg. R9 270 Ohm Resistor, 0603 Pkg. T1 1:1 Transformer - Tyco MABACT0039 U1 HMC686LP4(E) Downconverter L1 7.5 nH Ind, 0402 Pkg. PCB [2] 118162 Evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25R, FR4 10 - 17 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC686LP4 / 686LP4E v05.0509 BiCMOS MIXER W/ INTEGRATED LO AMPLIFIER, 700 - 1500 MHz Application Circuit - 1.4 - 1.5 GHz RF LTE Band Mixers - SINGLE & DOUBLE BALANCED - SMT 10 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 20 delivery, and to place orders: Analog For price, delivery and to place orders: Microwave Corporation, Alpha Road, Chelmsford, MADevices, 01824 Inc., responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 - 18