HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
Typical Applications
Features
The HMC713LP3E is ideal for:
Wide Dynamic Range: up to 54 dB
• Cellular Infrastructure
High Accuracy:
±1 dB with 54 dB Range Up To 2.7 GHz
• WiMAX, WiBro & LTE/4G
Fast Output Response Time
• Power Monitoring & Control Circuitry
Supply Voltage: +2.7 to +5.5V
• Receiver Signal Strength Indication (RSSI)
Power-Down Mode
• Automatic Gain & Power Control
11
Excellent Stability over Temperature
• Military, ECM & Radar
16 Lead 3x3 mm SMT Package: 9mm²
Functional Diagram
Power Detectors - SMT
General Description
The HMC713LP3E Logarithmic Detector/Controller
is ideal for converting the power of RF signals with
frequencies in the 50 MHz to 8000 MHz range, to a
DC voltage, proportional to input power, at its output.
The HMC713LP3E employs a successive compression
technology which delivers 54 dB of dynamic range
with high measurement accuracy over a wide input
frequency range. As the input signal is increased,
successive amplifiers move into saturation one by one
creating an accurate approximation of the logarithm
function. The outputs of a series of detectors are
summed, converted into voltage domain and buffered
to drive the OUTP output.
For detection mode, the OUTP pin is connected to
the VSET input and will provide a nominal logarithmic
slope of 17 mV/dB and an intercept of -68 dBm. The
HMC713LP3E can also be used in the controller mode
where an external voltage is applied to the VSET pin to
create an AGC or APC feedback loop.
Electrical Specifications, TA = +25 °C, Vcc = +3V, EN = +3V [1]
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Typ.
Units
Input Frequency
Parameter
50
100
500
900
1900
2700
3900
5800
7000
8000
MHz
±3 dB Dynamic Range
61
61
61
62
62
61
58
50
44
40
dB
±3 dB Dynamic Range Center
-27
-27
-27
-28
-28
-28
-26
-23
-20
-17
dBm
±1 dB Dynamic Range
54
53
53
54
55
54
49
39
33
31
dB
OUTP Slope
17.2
17.2
17.2
17.1
17
17.2
18.3
21.2
23.8
25.5
mV/dB
OUTP Intercept
-67.9
-68.1
-68.6
-68.9
-69.5
-69.2
-65.3
-55.9
-48.8
-44.2
dBm
-1.3
-1.3
-1.2
-1.2
-1.1
-1.1
-1.2
-2.1
-2.8
-3.5
dB
Variation of OUTP with Temperature
from -40°C to +85°C @ -20 dBm Input
[1] Detector mode measurements; OUTP (Pin 13) is connected to VSET (Pin 7) through an RC network.
11 - 1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
Electrical Specifications, (continued)
Parameter
Conditions
Min.
Typ.
Max.
Units
Power Down (EN) Input
Voltage Range for Normal Mode
0.8 x Vcc
Voltage Range for Powerdown Mode
Vcc/2
Vcc/2
V
0.2 x Vcc
V
Power Supply (Vcc)
2.7 - 5.5
V
Supply Current in Normal Mode
EN Input at Vcc
17
mA
Supply Current in Power Down Mode
EN Input at GND
0.4
mA
OUTP Output
Rise Time
CLPF= 0, No Power to -10 dBm, 10% - 90%
24
ns
Fall Time
CLPF= 0, -10 dBm to No Power, 90% - 10%
36
ns
50mV reduction in output voltage swing
(3 dB referred to the input) [1]
16
MHz
Closed Loop (Eval Board Setup)
0.2 - 1.2
V
Open Loop
0.1 to
(Vcc -0.1)
V
4.2 / 0.48
mA
Current Drive Source / Sink
4.0 / 0.43
mA
Output Voltage Range
0.2 - 2.1
V
F= 50 MHz to 8 GHz
Z0 = 50Ω, See plot
10
dB
1
MΩ
Input Voltage Range
Eval Board
0.2 - 1.2
V
Low Frequency Gain
VSET to OUTP
64
dB
11
kHz
Output Video BW
Voltage Range
Voltage Range
Current Drive Source / Sink
OUTN Output
RF Input
Input Return Loss (S11)
VSET Input
Input Impedance
Open Loop Corner Frequency
11
power detectors - SMT
Operating Voltage Range
[1] Two tone test: Frequency = 900 MHz, Tone 1 Power = -20 dBm, Tone 2 Power = -28 dBm
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
11 - 2
HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
Output Voltage & Error
vs. Input Power, Fin = 50 MHz
Output Voltage & Error
vs. Input Power, Fin = 100 MHz
6
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
1.6
4
2
2
1.6
-2
0.8
OUTN
0
-50
-40
-30
-20
-10
0
0.4
-6
0
10
-60
OUT[P,N] (V)
1.6
2.4
4
2
2
1.6
0
1.2
-2
0.8
-40
OUTN
0
-10
0
10
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
4
2
0
-2
0.8
-40
-30
-20
-10
0
-4
0.4
-6
0
-60
10
OUTN
-6
-50
-40
6
2.4
4
2
2
1.6
-20
-10
0
10
6
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
4
2
0
1.2
-2
0.8
ERROR (dB)
-2
0.8
ERROR (dB)
0
1.2
OUT[P,N] (V)
1.6
-30
Output Voltage & Error
vs. Input Power, Fin = 2700 MHz
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
2
-4
INPUT POWER (dBm)
Output Voltage & Error
vs. Input Power, Fin = 1900 MHz
OUT[P,N] (V)
-20
6
INPUT POWER (dBm)
OUTP
OUTP
OUTN
0.4
0
-50
-30
OUTP
0.4
-50
-6
-50
1.2
OUTP
-60
-4
ERROR (dB)
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
6
OUT[P,N] (V)
2.4
2
OUTN
Output Voltage & Error
vs. Input Power, Fin = 900 MHz
Output Voltage & Error
vs. Input Power, Fin = 500 MHz
ERROR (dB)
Power Detectors - SMT
-2
INPUT POWER (dBm)
2.4
-40
-30
-20
INPUT POWER (dBm)
11 - 3
0
0.8
-4
INPUT POWER (dBm)
-60
2
OUTP
0.4
-60
4
1.2
OUTP
11
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
ERROR (dB)
0
1.2
ERROR (dB)
OUT[P,N] (V)
2
6
2.4
OUT[P,N] (V)
2.4
-10
0
-4
0.4
-6
0
10
-60
OUTN
-4
-6
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
Output Voltage & Error
vs. Input Power, Fin = 3900 MHz
Output Voltage & Error
vs. Input Power, Fin = 5800 MHz
2
2
1.6
0
1.2
-2
0.8
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
4
2
0
1.2
-2
0.8
OUTP
OUTP
OUTN
0.4
-4
0.4
-4
11
OUTN
-60
-50
-40
-30
-20
-10
0
-6
0
-6
0
-50
10
-40
-30
4
2
2
1.6
0
1.2
-2
0.8
6
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
4
2
0
1.2
-2
0.8
OUTP
OUTP
0.4
-4
0.4
0
-30
-20
-10
0
-6
0
10
-4
OUTN
OUTN
-40
10
ERROR (dB)
OUT[P,N] (V)
2.4
ERROR (dB)
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
6
OUT[P,N] (V)
2.4
-50
0
Output Voltage & Error
vs. Input Power, Fin = 8000 MHz
Output Voltage & Error
vs. Input Power, Fin = 7000 MHz
1.6
-10
INPUT POWER (dBm)
INPUT POWER (dBm)
2
-20
-6
-40
-30
INPUT POWER (dBm)
-20
-10
0
10
INPUT POWER (dBm)
Input Return Loss
power detectors - SMT
OUT[P,N] (V)
4
6
ERROR (dB)
1.6
2.4
ERROR (dB)
OUTP Err +25C
OUTP Err +85C
OUTP Err -40C
OUTN Err +25C
OUTN Err +85C
OUTN Err -40C
2
6
OUT[P,N] (V)
2.4
RETURN LOSS (dB)
0
-10
-20
-30
0
1
2
3
4
5
6
7
FREQUENCY (GHz)
8
9
10
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
11 - 4
HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
OUTP Slope vs. Supply Voltage
OUTP Slope vs. Frequency
27
27
SLOPE (mV/dB)
SLOPE (mV/dB)
23
21
19
21
19
15
0
1
2
3
4
5
FREQUENCY (GHz)
6
7
8
2.7
3.1
3.5
4.7
5.1
5.5
-40
INTERCEPT (dBm)
-50
-60
-70
+25C
+85C
-40C
-80
0
1
2
3
4
5
FREQUENCY (GHz)
6
7
0.05GHz
0.1GHz
0.5GHz
0.9GHz
1.9GHz
2.7GHz
3.9GHz
5.8GHz
7GHz
8GHz
-50
-60
-70
-80
2.7
8
3.1
3.5
4.7
0.05GHz
0.1GHz
0.5GHz
0.9GHz
1.9GHz
1.8
0dBm
1.5
-10dBm
1
4.3
5.1
5.5
OUTP Voltage & Error vs. Frequency
1.4
1.2
3.9
VOLTAGE SUPPLY (V)
OUTP vs. Frequency & Input Power
2.7GHz
3.9GHz
5.8GHz
7GHz
8GHz
6
4
ERROR
OUTP (V)
-20dBm
0.8
-30dBm
0.6
-40dBm
0.4
0.9
0
-2
OUTP
-4
0.3
-60dBm
0
1
2
0.6
-50dBm
0
1.2
ERROR (dB)
OUTP (V)
4.3
OUTP Intercept vs. Supply Voltage
-40
0.2
3.9
VOLTAGE SUPPLY (V)
OUTP Intercept vs. Frequency
-90
23
17
15
INTERCEPT (dBm)
Power Detectors - SMT
+25C
+85C
-40C
17
11
0.05GHz
0.1GHz
0.5GHz
0.9GHz
1.9GHz
2.7GHz
5.8GHz
3.9GHz
7GHz
8GHz
25
25
2
3
4
5
FREQUENCY (GHz)
6
7
8
-6
0
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
11 - 5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
Output Response [1] Fall Time C1 = Open
Output Response Fall Time [1] C1 = 10nF
1.5
1.5
1.2
0.9
0.6
0.3
0
0.9
0.6
0.3
0
50
100
150
200 250 300
TIME (ns)
350
400
450
0
500
Output Response Rise Time [1] C1 = Open
0
25
50
75
100
125
TIME (us)
150
175
200
Output Response Rise Time [1] C1 = 10nF
1.5
1.5
1.2
0.9
10 dBm
0 dBm
-10 dBm
-20 dBm
-30 dBm
1.2
10 dBm
0 dBm
-10 dBm
-20 dBm
-30 dBm
OUTP (V)
OUTP (V)
10 dBm
0 dBm
-10 dBm
-20 dBm
-30 dBm
0.6
0.3
0.9
0.6
0.3
0
0
0
50
100
150
200 250 300
TIME (ns)
350
400
450
500
0
10
20
30
40
50
60
TIME (us)
70
80
90
100
11
power detectors - SMT
10 dBm
0 dBm
-10 dBm
-20 dBm
-30 dBm
OUTP (V)
OUTP (V)
1.2
[1] 900 MHz, Switched CW-Tone
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
11 - 6
HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
Absolute Maximum Ratings
Power Detectors - SMT
11
Vcc
0 to +5.6V
EN Input Voltage
0 to +5.6V
VSET Input Voltage
0 to +5.6V
OUTP Output Current
5 mA
OUTN Output Current
5 mA
RF Input Power
12 dBm
Junction Temperature
125 °C
Continuous Pdiss (T = 85°C)
(Derate 5.43 mW/°C above 85°C)
0.22 Watts
Thermal Resistance (Rth)
(junction to lead)
184 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS].
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
7. REFER TO HMC APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC713LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
713
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
11 - 7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 20
delivery,
and
to place
orders: Analog
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Alpha
Road,
Chelmsford,
MADevices,
01824 Inc.,
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373
Order
at www.hittite.com
Phone: On-line
781-329-4700
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC713LP3E
v01.1009
54 dB, LOGARITHMIC
DETECTOR / CONTROLLER, 50 - 8000 MHz
Pin Descriptions
Function
Description
1, 4
N/C
These pins are not connected internally.
2, 5, 9 - 12
GND
These pins and package bottom must be connected to
RF/DC ground.
3
RFIN
RF input pin.
6
EN
Enable pin.
Apply VEN >0.8 x Vcc for normal operation.
Apply VEN