125932-HMC675LP3E

HMC675LP3E COMPARATORS - SMT v02.0312 10 GHz LATCHED COMPARATOR WITH RSCML OUTPUT STAGE Typical Applications Features The HMC675LP3E is ideal for: Equivalent Input Bandwidth: 10 GHz • ATE Applications Propagation Delay: 100 ps • High Speed Instrumentation Overdrive & Slew Rate Dispersion: 10 ps • Digital Receiver Systems Minimum Pulse Width: 60 ps • Pulse Spectroscopy Resistor Programmable Hysteresis • High Speed Trigger Circuits Differential Latch Control • Clock & Data Restoration Power Dissipation: 100 mW RSPECL and RSECL Versions Available 16 Lead 3x3 mm SMT Package: 9 mm 2 Functional Diagram General Description The HMC675LP3E is a SiGe monolithic, ultra fast comparator that features reduced swing (RS) CML output drivers and latch inputs. The comparator supports 10 Gbps operation while providing 100 ps propagation delay and 60 ps minimum pulse width with 0.2 ps rms random jitter (RJ). Overdrive and slew rate dispersion are typically 10 ps, making the device ideal for a wide range of applications from ATE to broadband communications. The reduced swing CML output stage is designed to directly drive 400 mV into 50 ohms terminated to GND. The HMC675LP3E features high speed latch and programmable hysteresis and may be configured to operate in either latch mode, or as a tracking comparator. Electrical Specifications, TA = +25 °C, Vcci= +3.3 V, Vcco = 0 V, Vee = -3 V, VTERM = 0 V Parameter Conditions Input Voltage Range Input Differential Voltage Typ. Max Units -2 2 V -1.75 1.75 V Input Offset Voltage ±5 mV Input Offset Voltage, Temperature Coefficient 15 µV / °C Input Bias Current 15 uA Input Bias Current Temperature Coefficient 50 nA / °C Input Offset Current 4 µA Input Impedance 50 Ω Common Mode Input Impedance 350 KΩ Differential Input Impedance 15 KΩ Active Gain 43 dB Common Mode Rejection Ratio 80 dB ±1 mV Hysteresis 1 Min. Rhys = ∞ Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price,2 delivery, andDrive, to place orders: AnalogMA Devices, For price, delivery andDevices to place orders: Hittite Microwave Elizabeth Chelmsford, 01824Inc., responsibility is assumed by Analog for its use, nor for any infringements of patents orCorporation, other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Order at www.hittite.com Phone: On-line 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC675LP3E v02.0312 10 GHz LATCHED COMPARATOR WITH RSCML OUTPUT STAGE Parameter Conditions Latch Enable Input Impedance Min. Typ. Each Pin 8 Max Units KΩ Latch Enable to Output Delay, tPLOL , tPLOH VOD = 200 mV 85 ps Latch Enable Minimum Pulse Width, tPL VOD = 200 mV 20 ps Latch Enable Input Range VOD = 200 mV Latch Setup Time, tS VOD = 200 mV 1.6 Latch Hold Time, tH 2.4 V 45 ps -42 ps DC Output Characteristics, with 50 Ω to GND Parameter Conditions Min. Max Units 0 mV -400 -380 mV 410 400 380 mV Conditions Min. Typ. Max Units VOD = 500 mV 70 100 130 Output Voltage High Level, Voh -10 Output Voltage Low Level, Vol -420 Output Voltage Differential Swing Typ. AC Performance Parameter Propagation Delay - tPD, tPDL , tPDH Propagation Delay, Temperature Coefficient Propagation Delay Skew (Rising to Falling Transition) VOD Dispersion tPD vs. Common Mode Dispersion, -1.75 V