126674-HMC847LC5

HMC847LC5 v06.1215 MUX & DEMUX - SMT 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE Typical Applications Features The HMC847LC5 is ideal for: Supports Data Rates up to 36 Gbps • SONET OC-768 Half Rate Clock Input • RF ATE Applications Quarter Rate Reference Clock Output • Broadband Test & Measurements Fast Rise and Fall Times: 11 / 12 ps • Serial Data Transmission up to 36 Gbps Programmable Differential Output Voltage Swing: 250 - 900 mVp-p • High Speed DAC Interfacing Single Supply: +3.3V 32 Lead Ceramic 5x5 mm SMT Package: 25 mm 2 Functional Diagram General Description The HMC847LC5 is a 4:1 multiplexer for operation at output data rate up to 36 Gbps. The mux latches the four differential inputs on falling edge of the input clock CKIN (See timing diagram on page.6). The device uses both rising and falling edges of the half-rate clock to serialize the data. A quarter-rate clock output, which is synchronous to the data output of HMC847LC5, is generated on chip. All clock and data inputs / outputs of the HMC847LC5 are CML and terminated on-chip with 50 Ohms to the, VCC, and may be DC or AC coupled. The inputs and outputs of the HMC847LC5 may be operated either differentially or single-ended. The HMC847LC5 also features an output level control pin, VCTRL, which allows for loss compensation or signal level optimization. The VDCC pin controls the data output cross-point & duty cycle. The HMC847LC5 operates from a single +3.3V supply and is available in ROHS compliant 5x5 mm SMT package. Electrical Specifications, TA = +25°C, Vcc = +3.3V Conditions Min. Typ. Max Units Power Supply Voltage Parameter ± 5% Tolerance 3.13 3.3 3.47 V Power Supply Current Vctrl = 2.5V 480 530 580 mA 1.7 2.5 3 V 900 mVp-p Output Amplitude Control Voltage Range (Vctrl) Data Output Voltage Swing Range Duty Cycle Control Voltage Range (Vdcc) Duty Cycle Control Range Clock Output Voltage Swing Differential, peak-to-peak @ 36 Gbps Vdcc = 1.6V for 50% duty cycle 1 1.6 2 V @ 36 Gbps 40 50 60 % Differential, peak-to-peak @ 10 GHz 480 580 680 mVp-p 36 Gbps 18 GHz Maximum Data Rate Maximum Clock Rate 1 550 Half Rate Clock Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE Parameter Conditions Data Rate Range [1] Min. VCC≥3.3V, TA≤25 Single-Ended, peak-to-peak Input Amplitude (Data) Input Amplitude (Clock) [2] Typ. Max Units DC 36 Gbps DC 40 Gbps 150 800 mVp-p Differential, peak-to-peak 150 1000 mVp-p Single-Ended, peak-to-peak [2] 100 700 mVp-p Differential, peak-to-peak 100 1000 mVp-p Input High Voltage (Data & Clock) Vctrl = 2.5V 2.8 3.8 V Input Low Voltage (Data & Clock) Vctrl = 2.5V 2.3 3.3 V Output High Voltage Vctrl = 2.5V 2.94 Vctrl = 2.5V 2.62 V Data input up to 10 GHz -10 dB Clock input up to 36 GHz -12 dB Data output up to 28 GHz -10 dB Output Low Voltage Input Return Loss Output Return Loss -5 dB Deterministic Jitter, Jd [3] 3.5 ps p-p Additive Random Jitter, Jr [4] 0.75 ps rms 20% - 80% 13 ps 20% - 80% 13 ps Input clock to output clock 107 ps Input clock to output data 125+2.5 CLKIN period ps Set Up Time, ts Falling edge of CKIN to t_sample at center of DIN1-4 time -80 ps Hold Time, th Falling edge of CKIN to t_sample at center of DIN1-4 time 90 ps Rise Time, tr Clock output up to 36 GHz V [3] Fall Time, tf [3] Propagation Delay Clock to Clock, Tcdp Propagation Delay Clock to Data, Tdpd MUX & DEMUX - SMT Electrical Specifications, (continued) [1] Low frequency operation depends on AC coupling. [2] The un-used port is biased @ 3.3V [3] CKINP: 18 GHz clock signal, 300 mVp-p single-ended, D1P-D4P: 9 Gbps PRBS 231-1 pattern, 300 mVp-p single-ended [4] Random jitter is measured with 36 Gbps PRBS31 pattern DC Current vs. Supply Voltage [1] [2] Differential Output Swing vs. Supply Voltage [1][2] 700 pp DIFFERENTIAL VOLTAGE (mV ) 850 DC CURRENT (mA) 650 600 550 500 450 400 350 3.13 3.19 3.24 3.3 3.36 SUPPLY VOLTAGE V +25 C [1] Vctrl = 2.5V CC 3.41 3.47 800 750 700 650 600 550 500 450 3.13 3.19 +85 C 3.24 3.3 3.36 SUPPLY VOLTAGE V (V) -40 C +25 C +85 C CC 3.41 3.47 (V) -40 C [2] Data Rate = 36 Gbps For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 2 HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE DC Current vs. Vctrl [1] Differential Output Swing vs. Vctrl [1] 850 DC CURRENT (mA) 530 520 510 500 1.7 1.8 1.9 2 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 CONTROL VOLTAGE V CTRL 750 650 550 450 350 250 1.7 1.8 1.9 3 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 CONTROL VOLTAGE V 16 16 14 14 FALL TIME (ps) 18 12 10 CTRL 3 (V) Fall Time vs. Supply Voltage [1][2][3][4] 18 8 6 3.13 2 (V) Rise Time vs. Supply Voltage [1][2][3][4] RISE TIME (ps) MUX & DEMUX - SMT pp DIFFERENTIAL VOLTAGE (mV ) 540 12 10 8 3.19 3.24 3.3 3.36 SUPPLY VOLTAGE V +25 C CC 3.41 6 3.13 3.47 3.19 (V) 3.24 3.3 3.36 SUPPLY VOLTAGE V +85 C -40 C +25 C Peak-to-Peak Jitter vs. Supply Voltage [1][2][3][5] CC 3.41 3.47 (V) +85 C -40 C RMS Jitter vs. Supply Voltage [1][2][3][5] 8 2 1.75 RMS JITTER (ps) P-P JITTER (ps) 6 4 1.5 1.25 1 0.75 0.5 2 0.25 0 3.13 3.19 3.24 3.3 3.36 SUPPLY VOLTAGE V +25 C CC 3.41 0 3.13 3.19 +85 C 3.24 3.3 3.36 SUPPLY VOLTAGE V (V) [1] Data Rate = 36 Gbps [2] Vctrl = 2.5V [5] Source jitter was not deembeded 3 3.47 -40 C +25 C [3] Data was taken at single-ended output +85 C CC 3.41 3.47 (V) -40 C [4] 20% - 80% For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE Data Input Return Loss vs. Frequency [1][2] Data Output Return Loss vs. Frequency [1][2] 0 -5 -10 -15 -20 -25 -30 0 4 8 12 16 20 24 28 32 36 -5 -10 -15 -20 -25 -30 40 0 4 8 12 FREQUENCY (GHz) Clock Input Return Loss vs. Frequency [1][2] 20 24 28 32 36 40 Clock Output Return Loss vs. Frequency [1][2] 0 CLOCK INPUT RETURN LOSS (dB) 0 CLOCK INPUT RETURN LOSS (dB) 16 FREQUENCY (GHz) -5 -10 -15 -20 -25 -30 -5 -10 -15 -20 -25 MUX & DEMUX - SMT DATA OUTPUT RETURN LOSS (dB) DATA INPUT RETURN LOSS (dB) 0 -30 0 4 8 12 16 20 24 28 32 36 40 0 4 8 12 FREQUENCY (GHz) 16 20 24 28 32 36 40 FREQUENCY (GHz) 40 Gbps Single-Ended Output Eye Diagram Measurement Results Eye Amp (mVpp) P-P Jitter (ps) RMS Jitter (ps) Rise Time (ps) Fall Time (ps) HSP 308 4.8 1.1 11.6 14.4 HSN 328 3.07 0.74 12.4 13.9 Time Scale: 10 ps/div ; Amplitude Scale: 100 mV/div Test Conditions: VCC = +3.3V, VCTRL = 2.5V; D1P-D4P: 10 Gbps NRZ PRBS 231-1 pattern, 300 mVp-p single-ended CKINP: 20 GHz Clock Signal, 300 mVp-p single-ended [1] Vctrl = 2.6V [2] Device measured on evaluation board with single ended time domain gating For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 4 HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE MUX & DEMUX - SMT 36Gbps Single-Ended Output Eye Diagram Measurement Results Eye Amp (mVpp) P-P Jitter (ps) RMS Jitter (ps) Rise Time (ps) Fall Time (ps) HSP 320 4.27 1.03 12.7 13.5 HSN 338 3.33 0.65 12.7 12.7 Time Scale: 10 ps/div ; Amplitude Scale: 100 mV/div Test Conditions: VCC = +3.3V, VCTRL = 2.5V; D1P-D4P: 9 Gbps NRZ PRBS 231-1 pattern, 300 mVp-p single-ended CKINP: 18 GHz Clock Signal, 300 mVp-p single-ended 20 Gbps Single-Ended Output Eye Diagram Measurement Results Eye Amp (mVpp) P-P Jitter (ps) RMS Jitter (ps) Rise Time (ps) Fall Time (ps) HSP 336 2.93 0.91 14.2 15.8 HSN 352 2.13 0.73 13 14.4 Time Scale: 20 ps/div ; Amplitude Scale: 100 mV/div Test Conditions: VCC = +3.3V, VCTRL = 2.5V; D1P-D4P: 5 Gbps NRZ PRBS 231-1 pattern, 300 mVp-p single-ended CKINP: 10 GHz Clock Signal, 300 mVp-p single-ended 5 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE MUX & DEMUX - SMT Timing Diagram For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 6 HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE MUX & DEMUX - SMT Absolute Maximum Ratings Power Supply Voltage (Vcc) +0.5V to +3.7V Input Voltages Vcc -2V to Vcc +0.5V DC Control Pins (Vctrl, Vdcc) Vcc +0.2V to Vcc -2.5V Channel Temperature 125 °C Continuous Pdiss (T = 85 °C) (derate 50.91 mW/°C above 85 °C ) 2.04 W Thermal Resistance (Channel to die bottom) 19.64 °C/W Storage Temperature -65°C to +150°C Operating Temperature -40°C to +85°C ESD Level (HBM) Class 1B ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. CHARACTERS TO BE BLACK INK MARKED WITH .018”MIN to .030”MAX HEIGHT REQUIREMENTS. UTILIZE MAXIMUM CHARACTER HEIGHT BASED ON LID DIMENSIONS AND BEST FIT. LOCATE APPROX. AS SHOWN. 6. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating [2] Package Marking [1] HMC847LC5 Alumina, White Gold over Nickel MSL3 H847 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C 7 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE Pin Descriptions Function Description 1, 10, 16, 18, 24, 26 VCC Power Supply (3.3V) 2, 3, 5, 6, 27, 28, 30, 31 D2P, D2N, D4N, D4P, D1P, D1N, D3N, D3P Differential 4 Channel Serial Data Inputs. 4, 7, 12, 15, 19, 22, 25, 29, 32 GND Signal and supply ground 8, 9 CKOUTN, CKOUTP Differential Quarter Rate System Clock Outputs. 11 N/C Not connected. 13, 14 CKINN, CKINP Differential Half Rate Clock Inputs. 17 Vdcc Output Duty Cycle Correction Control 20, 21 OUTP, OUTN Differential High Speed Serial Data Outputs Interface Schematic For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D MUX & DEMUX - SMT Pin Number 8 HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE Pin Descriptions (Continued) Function Description 23 Vctrl Output Amplitude Control Interface Schematic MUX & DEMUX - SMT Pin Number 9 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE MUX & DEMUX - SMT Evaluation PCB List of Materials for Evaluation PCB 126674 [1] Item Description J1, J2, J18, J19 DC Connector J4, J7 K Connector J5, J6 2.4mm Connector J8 - J17 SMA Connector C1, C19 - C25 100 nF Capacitor, 0402 Pkg. C3 - C12 10 nF Capacitor, 0402 Pkg. C13 - C18 1 nF Capacitor, 0201 Pkg. C26, C28, C29 4.7 µF Capacitor, Tantalum U1 HMC847LC5 36 Gbps 4:1 Mux PCB [2] 126672 Evaluation Board The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed metal package base must be connected to GND. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 4350 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D 10 HMC847LC5 v06.1215 36 Gbps, 4:1 MUX WITH DUTY CYCLE CONTROL & PROGRAMMABLE OUTPUT VOLTAGE MUX & DEMUX - SMT Application Circuit 11 For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order online at www.analog.com Application Support: Phone: 1-800-ANALOG-D