126830-HMC905LP3E

HMC905LP3E v01.0414 FREQUENCY DIVIDERS & DETECTORS - SMT 4 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) Typical Applications Features The HMC905LP3E is ideal for: Low Noise Floor: -164 dBc/Hz at 10 MHz Offset for N = 4 • LO Generation with Low Noise Floor Programmable Frequency Divider, N = 1, 2, 3 or 4 • Software Defined Radios 400 MHz to 6 GHz Input Frequency Range • Clock Generators Up to +6 dBm Output Power • Fast Switching Synthesizers Sleep Mode: Consumes 101 CTRL=0, BIAS1BIAS0=00->000 OUTPUT POWER (dBm) OUTPUT POWER (dBm) CTRL=1, BIAS1BIAS0=01 5 0 Div by 4 Div by 3 Div by 2 Div by 1 -5 -10 0 1 2 3 4 5 6 7 5 0 -5 -10 8 +25°C 101 +85°C 101 -40°C 101 +25°C 000 +85°C 000 -40°C 000 0 1 2 INPUT FREQUENCY (GHz) 3 4 5 6 7 8 7 8 INPUT FREQUENCY (GHz) Output Power vs. Input Power Level Divide-by-4 Pout Divide-by-4 vs. CTRL & BIAS 10 10 OUTPUT POWER (dBm) CTRL=1, BIAS1BIAS0=01 OUTPUT POWER (dBm) 5 0 6dBm 3dBm 9dBm -5 -10 0 1 2 3 4 5 6 7 5 0 -10 8 CTRL=0, BIAS=00 CTRL=1,BIAS=00 CTRL=0,BIAS=01 CTRL=1,BIAS=01 -5 0 1 2 INPUT FREQUENCY (GHz) 3 4 5 6 INPUT FREQUENCY (GHz) Output Power vs. Voltage Supply Divide-by-4 10 CTRL=1, BIAS1BIAS0=01 OUTPUT POWER (dBm) FREQUENCY DIVIDERS & DETECTORS - SMT 4 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) 5 0 3.3V 3.15V 3.45V -5 -10 0 1 2 3 4 5 6 7 8 INPUT FREQUENCY (GHz) [1] CTRL = 0, BIAS1, BIAS1 BIAS0 = 00, Pin = 6 dBm 4-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC905LP3E v01.0414 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) H2, H3, H4, H5 Harmonics, Divide-by-2 [1] 0 0 H2 H3 -10 HARMONICS DIVIDE-BY-2 (dBc) HARMONICS DIVIDE-BY-1 (dBc) CTRL=0,BIAS1BIAS0=00 H4 H5 -20 -30 -40 -50 0 1 2 3 4 5 6 -10 -20 -30 -40 H2 H3 H4 H5 -50 -60 -70 7 0 1 2 INPUT FREQUENCY (GHz) 5 6 7 0 -10 HARMONICS DIVIDE-BY-4 (dBc) HARMONICS DIVIDE-BY-3 (dBc) 4 H2, H3, H4, H5 Harmonics, Divide-by-4 [1] 0 -20 -30 -40 H2 H3 H4 H5 -50 -60 -70 3 INPUT FREQUENCY (GHz) H2, H3, H4, H5 Harmonics, Divide-by-3 [1] 0 1 2 3 4 5 6 -10 -20 -30 H2 H3 H4 H5 -40 -50 7 0 1 2 INPUT FREQUENCY (GHz) 3 4 5 6 7 INPUT FREQUENCY (GHz) Input to Output Isolation -20 INPUT OUTPUT ISOLATION (dBc) 4 -30 FREQUENCY DIVIDERS & DETECTORS - SMT H2, H3, H4, H5 Harmonics, Divide-by-1 [1] -40 -50 -60 -70 -80 0 1 2 3 4 5 6 7 INPUT FREQUENCY (GHz) [1] CTRL = 0, BIAS1, BIAS1 BIAS0 = 00, Pin = 6 dBm Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4-4 HMC905LP3E v01.0414 FREQUENCY DIVIDERS & DETECTORS - SMT 4 4-5 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) Programming Truth Table for Frequency Division Ratios Absolute Maximum Ratings RF Input Power 12 dBm Supply Voltage (Vcc) 3.6V Control Inputs (B0, B1, CTRL, Bias0, EN) 3.6V Junction Temperature 125 °C Continuous Pdiss (T = 85 °C) (derate 33 mW/ °C above 85 °C) 1.3 W Thermal Resistance (Junction to ground paddle) 30 °C/W Storage Temperature -65 to +125 °C Operating Temperature -40 to +85 °C State B0, B1, CTRL, BIAS1, BIAS0, EN Class 1A Low 0 to 0.8V High 1.5V to 3.3V ESD Sensitivity (HBM) B1 B0 Divide-by 0 0 1 0 1 2 1 0 3 1 1 4 0 = Logic Low 1 = Logic High Digital Control Input Voltages ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Typical Supply Current vs. EN, BIAS0, BIAS1 & CTRL Bits 3.3V Supply Typ. Current (mA) Pout Typ. (dBm) Noise Floor 84 1.5 Low 105 4.8 EN CTRL BIAS1 BIAS0 1 0 0 0 1 0 0 1 1 0 1 0 98 3.9 1 1 0 0 100 2.4 Better 1 1 0 1 120 6.3 Best 1 1 1 0 113 5.3 0 x x x 0.001 -55 Note: Currents for the divide-by-4 option, 2 GHz and 6 dBm input and 3.3V; for Vcc voltage supply from 3.15V to 3.45V, the HMC905LP3E total current is varying with a maximum of ~8% around typical values. With temperature, the total current is changing from +25°C to -40°C/+85°C with about ±3%. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC905LP3E v01.0414 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC905LP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] 905 XXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com FREQUENCY DIVIDERS & DETECTORS - SMT 4 4-6 v01.0414 FREQUENCY DIVIDERS & DETECTORS - SMT 4 4-7 HMC905LP3E 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) Pin Description Pin Number Function Description 1 Vcc +3.3V Voltage Supply 2 RFINP RF Positive Input. Input is DC coupled, external DC blocks required. 3 RFINN RF Negative Input. Input is DC coupled, external DC blocks required. 4 GND This pin must be connected to RF/DC ground. 5 B0 Division ratio (LSB) See programming truth table. 6 B1 Division ratio (MSB) See programming truth table. 7 CTRL Divider Output Buffer Power Control 13 BIAS1 Divider Core Bias Control 14 BIAS0 Divider Core Bias Control 15 EN Chip Enable 8, 9, 12, 16 N/C No connection required. This pin may be connected to ground, without affecting performance. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC905LP3E 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) Pin Description (Continued) Pin Number Function Description 10 IOUTN Divider Negative Output, Open Drain. Typically 50 Ohms connected to Vcc. 11 IOUTP Divider Positive Output, Open Drain. Typically 50 Ohms connected to Vcc. Interface Schematic Application Note: The HMC905LP3E is a high performance RF divider. Such dividers are high gain devices with internal feedback. The device will oscillate if used with AC coupled RF inputs and if no RF input is applied. Normally, if the RF input signal is removed the device should be disabled, or it should be placed in divide by 1 mode. The device is stable in divide by one mode with no RF input. The device will oscillate in divide 2, 3, or 4 modes with no RF input. In general, very small RF input levels will stop all oscillations. At the minimum rated RF input sensitivity level or higher, no oscillations or spurious signals exist and excellent low noise performance is achieved. For input frequency lower than 400 MHz, square wave input signal is recommended. For single ended applications, apply the signal on the positive input RFinp and terminate the unused output with 50 ohms. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 FREQUENCY DIVIDERS & DETECTORS - SMT v01.0414 4-8 v01.0414 FREQUENCY DIVIDERS & DETECTORS - SMT 4 HMC905LP3E 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) Evaluation PCB List of Materials for Evaluation PCB 126830 Item Description J3 DC Connector J1, J4, J7, J8 SMA SRI Connector C1, C2, C10 - C12, C18 1nF Capacitor, 0402 Pkg C3, C6, C9 100nF Capacitor, 0402 Pkg C5 10uF Capacitor, 1206 Pkg C8 10pF Capacitor, 0402 Pkg R1, R7 51 Ohms, Resistor, 0402 Pkg R2 - R6, R9 100 kOhms, Resistor, 0402 Pkg TP1, TP3, TP4 PC Compact SMT U1 HMC905LP3E Programmable Divider PCB [2] 126828 Eval Board [1] The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and backside ground paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR 4-9 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC905LP3E v01.0414 6 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1 to 4) 4 FREQUENCY DIVIDERS & DETECTORS - SMT Evaluation PCB Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 - 10