HMC917LP3E
v00.0410
SMT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT
Typical Applications
Features
The HMC917LP3E is Ideal for:
Output Power: 2 dBm Typical
• Microwave Radio & VSAT
Spurious Suppression: >20 dBc
• Military Radios, Radar & ECM
SSB Phase Noise: -148 dBc/Hz @ 100 kHz Offset
• Test Instrumentation
Single Supply: 5V@ 91 mA
TE
Functional Diagram
General Description
B
SO
LE
The HMC917LP3E is an active x4 frequency multiplier housed in a 3x3 mm leadless QFN surface
mount package. Power output is 2 dBm typical from
a single +5V supply and varies little vs. input power,
temperature and supply voltage. Suppression of
undesired fundamental and spurious is 20 dBc
typical with respect to output signal level. The low
additive SSB phase noise of -148 dBc/Hz at 100 kHz
offset helps the user maintain good system noise
performance. The HMC917LP3E is ideal for use in LO
multiplier chains allowing reduced parts count versus
traditional approaches.
Electrical Specifications, TA = +25° C, Vcc = 5V [1]
O
FREQ. MULTIPLIERS - ACTIVE - SMT
5
16 Lead 3x3 mm SMT Package: 9mm²
Parameter
Min.
Frequency Range, Input
Typ.
Max.
1.5 - 2.5
Frequency Range, Output
GHz
6 - 10
Input Power Range
0
Output Power Range
Spurious
5
Units
GHz
10
dBm
2
dBm
-20
dBc
Input Return Loss
7
dB
Output Return Loss
12
dB
-148
dBc/Hz
91
mA
SSB Phase Noise (100 kHz Offset)
Supply Current (Icc)
Pin = +5 dBm
[1] Single-ended operation
5-1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC917LP3E
v00.0410
SMT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT
Output Power vs. Drive Level, T = 25 °C [1]
4
4
3
3
2
1
0
-1
-2
5
6
7
8
9
10
1
-1
-2
11
OUTPUT FREQUENCY (GHz)
5
0 dBm
5 dBm
10 dBm
0
TE
+25C
+85C
-40C
2
5
6
7
8
9
10
11
OUTPUT FREQUENCY (GHz)
4
Spurious Output vs. Fin
Pin = +5 dBm, T = 25 °C [1]
LE
Output Power vs. Supply Voltage
@ 0 dBm Drive Level, T = 25 °C [1]
10
0
2
1
0
4.75V
5.0V
5.25V
-1
-2
5
6
7
8
9
10
OUTPUT LEVEL (dBm)
-10
B
SO
OUTPUT POWER (dBm)
3
-20
-30
-40
-50
-60
1rst Harmonic
2nd Harmonic
3rd Harmonic
4th Harmonic
5th Harmonic
6th Harmonic
-70
-80
-90
-100
11
1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8
INPUT FREQUENCY (GHz)
OUTPUT FREQUENCY (GHz)
Output Return Loss vs. Temperature [1]
O
Input Return Loss vs. Temperature [1]
0
+25C
+85C
-40C
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
0
-5
-10
-10
-15
-20
+25C
+85C
-40C
-25
-15
1.0
1.3
1.5
1.8
2.0
2.2
FREQUENCY (GHz)
2.5
2.7
3.0
FREQ. MULTIPLIERS - ACTIVE - SMT
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
Output Power vs.
Temperature @ 0 dBm Drive Level [1]
-30
5
6
7
8
9
10
11
FREQUENCY (GHz)
[1] All data shown is single-ended operation
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
5-2
HMC917LP3E
v00.0410
SMT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT
SSB Phase Noise vs. Pin
Fout = 8 GHz, T = 25 °C [1]
Icc vs. Temperature [1]
100
OPERATING CURRENT (mA)
0 dBm
5 dBm
10 dBm
-130
-150
-160
1.0e+2
90
TE
-140
85
80
1.0e+3
1.0e+4
1.0e+5
1.0e+6
1.0e+7
+6V
Storage Temperature
-65 to +150 °C
ESD Sensitivity (HBM)
150V
4.9
LE
+20 dBm
Vcc
4.8
5
5.1
5.2
5.3
Reliability Information
B
SO
RF Input (Vcc = +5V)
4.7
Vcc (V)
OFFSET FREQUENCY (Hz)
Absolute Maximum Ratings
+25C
+85C
-40C
95
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Junction Temperature To Maintain
1 Million Hour MTTF
150 °C
Nominal Junction Temperature
(T = 85 °C)
101.4 °C
Thermal Resistance
(Junction to GND paddle, 5V supply)
35.4 °C/W
Operating Temperature
-40 °C to + 85 °C
O
FREQ. MULTIPLIERS - ACTIVE - SMT
5
SSB PHASE NOISE (dBc/Hz)
-120
[1] All data shown is single-ended operation
5-3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC917LP3E
v00.0410
SMT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
B
SO
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
O
Package Information
Part Number
Package Body Material
Lead Finish
HMC917LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
917
XXXX
5
FREQ. MULTIPLIERS - ACTIVE - SMT
LE
TE
Outline Drawing
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
5-4
HMC917LP3E
v00.0410
SMT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT
Pin Description
5-5
Description
Interface Schematic
1, 4 - 9, 12,
13, 15, 16
GND
These pins and exposed paddle must
be connected to RF/DC ground.
2
RFNIN
(or GND)
This pin is AC coupled and matched to 50 ohms, and
is 180° out of phase with pin 3 for differential operation. RF/DC ground for single ended operation.
3
RFIN
This pin is AC coupled and matched to 50 ohms
10
RFOUT
This pin is AC coupled and matched to 50 ohms
11
RFNOUT
This pin is AC coupled and matched to 50 ohms, and
is 180° out of phase with pin 10 for differential operation. Terminate in 50 ohms for single ended operation.
14
Vcc
LE
TE
Function
B
SO
Supply voltage +5V
O
FREQ. MULTIPLIERS - ACTIVE - SMT
5
Pin Number
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC917LP3E
v00.0410
SMT MMIC x4 ACTIVE
FREQUENCY MULTIPLIER, 6 - 10 GHz OUTPUT
O
List of Materials for Evaluation PCB 128383
Item
Description
J1 - J3
PCB Mount SMA Connector
J4, J5
DC Pin
C1
100 pF Capacitor, 0402 Pkg.
C2
1000 pF Capacitor, 0402 Pkg.
C3
4.7 µF Capacitor, 0402 Pkg.
U1
HMC917LP3E x4 Active Multiplier
PCB [2]
128702 Eval Board
[1]
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines should have 50 Ohm impedance while
the package ground leads and exposed paddle
should be connected directly to the ground plane
similar to that shown. The evaluation circuit board
shown is available from Hittite upon request.
5
FREQ. MULTIPLIERS - ACTIVE - SMT
B
SO
LE
TE
Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery,
andRoad,
to place
orders: Analog
Devices,
For price,
delivery
and
to for
place
Hittite Microwave
Corporation,
20 Alpha
Chelmsford,
MA
01824Inc.,
responsibility
is assumed
by Analog
Devices
its use, orders:
nor for any infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
5-6