131046-HMC928LP5E

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC928LP5E v03.1211 Typical Applications Features The HMC928LP5E is ideal for: Octave Bandwidth: 2 - 4 GHz • EW Receivers 450° Phase Shift • Military Radar Low Insertion Loss: 3.5 dB • Test Equipment Low Phase Error: ±5 Typical • Satellite Communications Single Positive Voltage Control • Beamforming Modules Functional Diagram 32 Lead 5x5 mm SMT Package: 25 mm² General Description The HMC928LP5E is an Analog Phase Shifter which is controlled via an analog control voltage from 0 to +13V. The HMC928LP5E provides a continuously variable phase shift of 0 to 450 degrees from 2 to 4 GHz, with extremely consistent low insertion loss versus phase shift and frequency. The high accuracy HMC928LP5E is monotonic with respect to control voltage and features a typical low phase error of ±5 degrees over an octave bandwidth. The HMC928LP5E is housed in an RoHS compliant 5x5 mm QFN leadless package. 13 Phase Shifters - ANALOG - SMT 450° Analog Phase Shifter, 2 - 4 GHz Electrical Specifications, TA = +25° C, 50 Ohm System Parameter Frequency (GHz) Min. Typ. Max. Units Phase Shift Range 2 - 4 GHz 450 deg Insertion Loss 2 - 4 GHz 3.5 dB Return Loss (Input & Output) 2 - 4 GHz 15 dB Control Voltage Range 2 - 4 GHz Control Current Range 2 - 4 GHz 0 13 V ± 1.0 mA Maximum Input Power for Linear Operation 2 - 4 GHz Phase Voltage Sensitivity 2 - 4 GHz 35 10 deg/V dBm Phase Error * 2 - 4 GHz ±5 deg Phase Error (average) 2 - 4 GHz 3 deg Modulation Bandwidth 2 - 4 GHz 20 MHz Insertion Phase Temperature Sensitivity 2 - 4 GHz 0.10 deg/°C * Up to a phase shift range of 400 degrees. 13 - 1 For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC928LP5E v03.1211 450° Analog Phase Shifter, 2 - 4 GHz Insertion Loss vs. Frequency Insertion Loss vs. Vctl, F = 3 GHz -2 0 INSERTION LOSS (dB) -4 -5 -6 0V 0.5V 3V -7 + 25C + 85C - 40C -1 -2 -3 -4 6V 9V 13V -8 -5 1.5 2 2.5 3 3.5 4 0 4.5 1 2 3 4 5 FREQUENCY (GHz) 8 9 10 11 12 13 13 360 NORMALIZED PHASE SHIFT (degrees) NORMALIZED PHASE SHIFT (degrees) 500 2 GHz 3 GHz 4 GHz 400 300 200 100 1 2 3 4 5 6 7 8 9 10 11 12 13 350 340 + 25C + 85C - 40C 330 320 310 300 290 280 270 260 250 240 1.5 2 2.5 Vctl (V) 3 3.5 4 4.5 FREQUENCY (GHz) Phase Shift vs. Frequency (Relative to Vctl = 0V) Vctl = 0.5 to 13V Phase Error vs. Frequency, Fmean = 3 GHz [1] 20 600 550 500 PHASE ERROR (degrees) NORMALIZED PHASE SHIFT (degrees) 7 Phase Shift vs. Frequency @ Vctl = 6V (Relative to Vctl = 0V) Phase Shift vs. Vctl 0 0 6 Vctl (V) 450 400 350 300 250 200 150 100 15 0.5V 2V 4V 6V 10 8V 10V Average 5 0 Phase Shifters - ANALOG - SMT INSERTION LOSS (dB) -3 -5 50 0 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 4.5 -10 2 2.2 2.4 2.6 2.8 3 3.2 3.4 3.6 3.8 4 FREQUENCY (GHz) [1] 0 - 10V provides 0 - 400 degrees phase shift range For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 13 - 2 HMC928LP5E v03.1211 450° Analog Phase Shifter, 2 - 4 GHz Second Harmonics vs. Vctl, F = 6 GHz 100 100 90 90 Pin: -10 dBm Pin: 0 dBm Pin: +10 dBm 80 3RD HARMONIC (dBc) 80 2ND HARMONIC (dBc) Third Harmonics vs. Vctl, F = 3 GHz 70 60 50 40 30 20 10 1 2 3 4 5 6 50 40 30 20 Pin: -10 dBm Pin: 0 dBm Pin: +10 dBm 7 8 9 10 11 12 0 0 13 1 2 3 4 5 6 Vctl (V) 13 8 9 10 11 12 13 Insertion Loss vs. Pin @ 2 GHz 35 INSERTION LOSS (dB) -2 30 IP3 (dBm) 7 Vctl (V) Input IP3 vs. Vctl, F = 3 GHz 25 - 10 dBm 0 dBm + 10 dBm 20 15 0 1 2 3 4 5 6 7 8 9 10 11 12 0V 0.5V 6V 13V -3 -4 -5 -6 13 -10 -5 Vctl (V) 0 5 10 15 10 15 INPUT POWER (dBm) Insertion Loss vs. Pin @ 4 GHz Insertion Loss vs. Pin @ 3 GHz -2 INSERTION LOSS (dB) -2 INSERTION LOSS (dB) Phase Shifters - ANALOG - SMT 60 10 0 0 -3 -4 0V 0.5V 6V 13V -5 0V 0.5V 6V 13V -3 -4 -5 -6 -6 -10 -5 0 5 INPUT POWER (dBm) 13 - 3 70 10 15 -10 -5 0 5 INPUT POWER (dBm) For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC928LP5E v03.1211 450° Analog Phase Shifter, 2 - 4 GHz Phase Shift vs. Pin @ 2 GHz Phase Shift vs. Pin @ 3 GHz 1 0 -1 -2 -3 0V 0.5V 6V 13V -4 -5 -6 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 0 -1 -2 -3 0V 0.5V 6V 13V -4 -5 -6 -10 -8 -6 -4 -2 INPUT POWER (dBm) 1 4 6 8 10 12 13 0 0 0V 1V 3V -1 -2 RETURN LOSS (dB) NORMALIZED PHASE SHIFT (degrees) 2 Input Return Loss vs. Frequency, Vctl = 0 to +13V Phase Shift vs. Pin @ 4 GHz -3 -4 -5 -6 0V 0.5V 6V 13V -7 -8 6V 9V 13V -10 -20 -9 -10 -10 -8 -6 -4 -2 0 2 4 6 8 10 12 -30 1.5 2 2.5 INPUT POWER (dBm) 3.5 4 4.5 Reliability Information 0 -10 Junction Temperature (Tj) 150 °C Nominal Junction Temperature (T = 85° C and Pin = 10 dBm) 87 °C Thermal Resistance (Junction to GND paddle) 45 °C/W Operating Temperature -40 to +85 °C Absolute Maximum Ratings -20 0V 1V 3V -30 1.5 3 FREQUENCY (GHz) Output Return Loss vs. Frequency, Vctl = 0 to +13V RETURN LOSS (dB) 0 INPUT POWER (dBm) 2 2.5 6V 9V 13V 3 3.5 FREQUENCY (GHz) 4 4.5 Input Power (RFIN) +27 dBm Control Voltage (Vctl) -0.5V to +15V Storage Temperature -65 to +150 °C ESD Sensitivity (HBM) Class 1B Phase Shifters - ANALOG - SMT NORMALIZED PHASE SHIFT (degrees) NORMALIZED PHASE SHIFT (degrees) 1 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 13 - 4 HMC928LP5E v03.1211 450° Analog Phase Shifter, 2 - 4 GHz Outline Drawing 13 Phase Shifters - ANALOG - SMT NOTES: 13 - 5 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 6. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. Package Information Part Number Package Body Material Lead Finish HMC928LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H928 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C Pin Descriptions Pin Number Function Description 1 - 5, 8 - 13, 15 - 17, 20 - 32 N/C No connection required. These pins may be connected to RF/DC ground without affecting performance. 6 RFIN Port is DC blocked. 7, 8 GND Ground: Backside of package has exposed metal ground slug that must be connected to ground thru a short path. Vias under the device are required. 14 Vctl Phase shift control pin. Application of a voltage between 0 and 13 volts causes the transmission phase to change. The DC equivalent circuit is a series connected diode and resistor. 19 RFOUT Port is DC blocked. Interface Schematic For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC928LP5E v03.1211 450° Analog Phase Shifter, 2 - 4 GHz Evaluation PCB List of Materials for Evaluation PCB 131046 [1] Item Description J1 - J3 PCB Mount SMA Connector U1 HMC928LP5E Analog Phase Shifter C1, C2 Capacitor, 100 pF, 0402 Pkg. PCB [2] 127338 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com Phase Shifters - ANALOG - SMT 13 13 - 6