131087-HMC899LP4E

HMC899LP4E v00.0211 FILTERS - TUNABLE - SMT 3 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz Typical Applications Features The HMC899LP4E is ideal for: Fast Tuning Response • Test & Measurement Equipment Excellent Wideband Rejection • Military RADAR & EW/ECM Single Chip Replacement for Mechanically Tuned Designs • SATCOM & Space • Industrial & Medical Equipment Functional Diagram 24 Lead 4x4 mm SMT Package General Description The HMC899LP4E is a MMIC band pass filter which features a user selectable passband frequency. The 3 dB filter bandwidth is approximately 18%. The 20 dB filter bandwidth is approximately 35%. The center frequency can be varied between 18.5 and 37.0 GHz by applying an analog tune voltage between 0 and 14V. This tunable filter can be used as a much smaller alternative to physically large switched filter banks and cavity tuned filters. The HMC899LP4E has excellent microphonics due to the monolithic design, and provides a dynamically adjustable solution in advanced communications applications. Electrical Specifications, TA = +25 °C Parameter Fcenter Tuning Range Min. Typ. 18.5 3 dB Bandwidth Max. Units 37.0 GHz 18 % 0.81 *Fcenter GHz High Side Rejection Frequency (Rejection >20 dB) 1.20 *Fcenter GHz Low Side Sub-Harmonic Rejection (Rejection >40 dB) 0.54 *Fcenter GHz High Side Sub-Harmonic Rejection (Rejection >40 dB) 1.32 *Fcenter GHz >50 GHz Low Side Rejection Frequency (Rejection >20 dB) Re-entry Frequency (Rejection = 1V) 16 dBm Frequency Control Voltage (Vfctl) 0 Source/Sink Current (Ifctl) 14 V ±1 mA Residual Phase Noise [1] (100 kHz Offset) -157 dBc/Hz Fcenter Drift Rate -3.4 MHz/°C < 100 ns Tuning Speed, Phase Settling to within 10° [2] [1] Optimum residual phase noise performance requires the use of a low noise driver circuit. [2] Tuning speed includes 40 ns tuning voltage ramp from driver. 3-1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC899LP4E v00.0211 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz Broadband Insertion Loss vs. Vfctl -5 -20 RETURN LOSS (dB) INSERTION LOSS (dB) -10 -30 -40 -50 -60 0V 3V 7V 14V -70 -10 14V -20 -25 -30 -80 5 10 15 20 7V 0V -15 25 30 35 40 45 50 S11 S22 5 10 15 FREQUENCY (GHz) Insertion Loss vs. Vfctl 40 45 50 Return Loss vs. Vfctl 0 0 0V 3V 7V 14V -4 -5 RETURN LOSS (dB) -2 INSERTION LOSS (dB) 20 25 30 35 FREQUENCY (GHz) -6 -8 -10 -12 FILTERS - TUNABLE - SMT 0 0 -10 0V -15 7V -20 -14 14V S11 S22 -25 -16 -30 -18 15 20 25 30 35 40 15 45 20 25 30 35 40 45 FREQUENCY (GHz) FREQUENCY (GHz) Insertion Loss vs. Temperature, Vfctl = 7V Return Loss vs. Temperature, Vfctl = 7V 0 0 -2 +25C +85C -40C -4 -5 RETURN LOSS (dB) INSERTION LOSS (dB) 3 Broadband Return Loss vs. Vfctl -6 -8 -10 -12 -14 -16 -10 S11 -15 S22 -20 +25C +85C -40C -25 -18 -30 -20 15 20 25 30 35 FREQUENCY (GHz) 40 45 15 20 25 30 35 40 45 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-2 HMC899LP4E v00.0211 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz 3 Center Frequency vs. Temperature Insertion Loss vs. Temperature -2 35 INSERTION LOSS (dB) CENTER FREQUENCY (GHz) 0 30 25 20 +25C +85C -40C 15 -4 -6 -8 -10 -12 +25C +85C -40C -14 10 -16 0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14 Vfctl (V) Vfctl (V) Maximum Return Loss in a 2 dB Bandwidth vs. Temperature 3 dB Bandwidth vs. Temperature 0 23 22 -2 +25C +85C -40C RETURN LOSS (dB) 21 BANDWIDTH (%) FILTERS - TUNABLE - SMT 40 20 19 18 17 16 15 +25C +85C -40C 14 -4 -6 -8 -10 -12 -14 13 0 0 2 4 6 8 10 12 2 4 6 14 8 10 12 14 Vfctl (V) Vfctl (V) High Side Rejection Ratio vs. Temperature [1] Low Side Rejection Ratio vs. Temperature [1] 1.3 F20dB To Fcenter RATIO F20dB TO Fcenter RATIO 0.9 0.85 0.8 +25C +85C -40C 0.75 0.7 1.25 1.2 +25C +85C -40C 1.15 1.1 0 2 4 6 8 10 12 14 0 2 4 Vfctl (V) 6 8 10 12 14 Vfctl (V) [1] Rejection ratio is defined as the ratio of the frequency at which the relative insertion loss is 20 dB to ƒcenter 3-3 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC899LP4E v00.0211 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz 3 Group Delay 3000 0.6 0V 2V GROUP DELAY (ns) SENSITIVITY (MHz/V) 2500 2000 1500 1000 +25C +85C -40C 500 0 1 2 3 4 5 6 7 8 9 10 11 12 13 0.5 0.3 0.2 14 10 0.5 25 INPUT IP3 (dBm) GROUP DELAY (nS) 30 + 25C + 85C - 40C 0.3 15 20 25 30 35 FREQUENCY (GHz) 45 50 20 15 + 25C + 85C - 40C 10 0.2 0 2 4 6 8 10 12 1 14 2 3 4 5 6 7 9 10 11 12 45 + 1.0V + 7.0V + 14.0V -140 -150 -160 1e+3 1e+4 14 1e+5 OFFSET FREQUENCY (Hz) 1e+6 1e+7 8 Approximate Fcenter 40 7 35 6 30 5 25 4 20 3 Delta Phi 15 2 10 1 5 0 2 4 6 8 10 12 DELTA PHI (RAD/V) APPROXIMATE Fcenter (GHz) -120 -130 13 Phase Sensitivity vs. Vfctl Residual Phase Noise -170 1e+2 8 Vfctl (V) Vfctl (V) RESIDUAL PHASE NOISE (dBc/Hz) 40 Input IP3 vs. Temperature 0.6 0.4 14V 0.4 Vfctl (V) Group Delay vs. Fcenter vs. Temperature 7V FILTERS - TUNABLE - SMT Tuning Sensitivity vs. Temperature 0 14 Vfctl (Vdc) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-4 HMC899LP4E v00.0211 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz 3 Frequency Shift vs. Pin Phase Shift vs. Pin 0 -5 Vfctl = 0.5V Vfctl = 1V Vfctl = 7V Vfctl = 12V Vfctl = 14V -10 -15 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 FREQUENCY (MHz) PHASE (DEGREES) FILTERS - TUNABLE - SMT 0 -20 -40 Vfctl = 0.5V Vfctl = 1V Vfctl = 7V Vfctl = 12V Vfctl = 14V -60 -80 0 1 2 3 4 INPUT POWER (dBm) Absolute Maximum Ratings Frequency Control Voltage (Vfctl) -0.5 to +15V RF Power Input 27 dBm Storage Temperature -65 to +150 °C ESD Sensitivity (HBM) Class 1 A 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 INPUT POWER (dBm) Reliability Information Junction Temperature to Maintain 1 Million Hour MTTF 150 °C Nominal Junction Temperature (T= 85 °C and Pin = 27 dBm) 103 °C Operating Temperature -40 to +85 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 3-5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC899LP4E v00.0211 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz 3 FILTERS - TUNABLE - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. Pin BURR LENGTH SHALL BE 0.15 mm MAXIMUM. Pin BURR HEIGHT SHALL BE 0.05 mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05 mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC899LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H899 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-6 HMC899LP4E v00.0211 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz FILTERS - TUNABLE - SMT 3 Pin Descriptions Pin Number Function Description 8, 10, 11, 20 - 23 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 1, 2, 4 - 7, 12 - 15, 17 - 19, 24 GND These pins and exposed paddle must be connected to RF/DC ground. 3 RFIN This pin is AC coupled and matched to 50 Ohms. 9 Vfctl Center frequency control voltage. 16 RFOUT This pin is AC coupled and matched to 50 Ohms. Interface Schematic Application Circuit 3-7 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC899LP4E v00.0211 FILTER - TUNABLE, BAND PASS SMT 18.5 - 37.0 GHz 3 FILTERS - TUNABLE - SMT Evaluation PCB List of Materials for Evaluation PCB 131087 [1] Item Description J1, J2 Connector, 2.4 mm, 50 GHz Jack J6, J8 DC Pin C2 100 pF Capacitor, 0402 Pkg. U1 HMC899LP4E Filter - Tunable PCB [2] 130746 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR or Rogers 25FR The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohms impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, delivery, andRoad, to place orders: Analog Devices, For price, delivery and to for place Hittite Microwave Corporation, 20 Alpha Chelmsford, MA 01824Inc., responsibility is assumed by Analog Devices its use, orders: nor for any infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 3-8