131924-HMC921LP4E

HMC921LP4E v02.0312 Features The HMC921LP4E is ideal for: High Output IP3: +48 dBm • Cellular/3G & WiMAX/LTE/4G High Output P1dB: +33 dBm • Fixed Wireless & WLAN High Gain: 16 dB @ 900 MHz • CATV, Cable Modem & DBS Single Supply: +5V • Microwave Radio & Test Equipment 32% PAE @ +33 dBm Pout • IF & RF Applications Adjustable Bias Current TE Typical Applications 24 Lead 4x4 mm SMT Package: 16 mm² Functional Diagram General Description LE The HMC921LP4E is a high linearity GaAs HBT MMIC 2 watt power amplifier operating from 0.4 to 2.7 GHz and is housed in a RoHS compliant 4x4 mm QFN leadless package. The HMC921LP4E utilizes a minimum number of external components and operates from a single +5V supply. This versatile power amplifier can be biased for both low quiescent current and high quiescent current modes by adjusting a single external resistor. B SO Amplifiers - Linear & Power - SMT GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz Electrical Specifications, TA = +25°C, Vcc1 = Vcc2 = VEN = +5V [1] O Parameter Min. Frequency Range Gain Typ. Max. Min. 350 - 500 17 Gain Variation Over Temperature 19 Typ. Max. 400 mA (R1 = 270 Ω) Min. 800 - 1000 14 Max. Min. 9 0.01 11 Typ. Max. Min. 2000 - 2200 9.5 0.01 10.5 Typ. Max. Units 2500 - 2800 MHz 9 dB 8 0.01 dB / °C Input Return Loss 9 12 10 15 5 10 8 12 6 11 dB Output Return Loss 6 10 5 9 8 9 6 7 9 10 dB 32.5 34 30.5 32 31 32.5 32 32.5 33 33.3 dBm Output Power for 1dB Compression (P1dB) 0.01 16 Typ. 1800 - 2000 0.01 Saturated Output Power (Psat) 35 34 34 34 34.5 dBm Output Third Order Intercept (IP3) 47 44 43 43 45 dBm 12.9 9 8.5 6.9 6.5 dB 8 12 400 8 12 400 8 12 400 8 12 400 8 12 400 mA mA mA Noise Figure Supply Current (Icq) Ien Icc1 Icc2 [1] Specifications and data reflect HMC921LP4E measured using the respective application circuits for each designated frequency band found herein. Contact the HMC Applications Group for assistance in optimizing performance for your application. 1 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz Electrical Specifications, TA = +25°C, Vcc1 = Vcc2 = VEN = +5V [1] Min. Frequency Range Typ. Max. Min. 19 19.5 Gain Variation Over Temperature Max. Min. 800 - 1000 350 - 500 Gain Typ. 14 Max. Min. 1800 - 2000 16 001 Typ. 9 11 0.01 Typ. Max. Min. 2000 - 2200 10.3 0.01 10.8 Typ. Max. 2600 - 2800 8 0.01 Units MHz 9 dB 0.01 dB / °C 9 12 11 15 6 10 9 13 6 12 dB Output Return Loss 6 10 6 9 8 9 6 7.5 9 10 dB Output Power for 1dB Compression (P1dB) 33 34.5 31 32.5 31.5 33 32.8 33.5 33 34 dBm 35 34 Output Third Order Intercept (IP3) 43 45 Noise Figure 14 9 13 14 700 13 14 700 Supply Current (Icq) Ien Icc1 Icc2 34 34.5 35 dBm 46 47 47 dBm 8.5 8 8 dB 13 14 700 13 14 700 13 14 700 mA mA mA LE Saturated Output Power (Psat) TE Input Return Loss [1] Specifications and data reflect HMC921LP4E measured using the respective application circuits for each designated frequency band found herein. Contact the HMC Applications Group for assistance in optimizing performance for your application. 450 MHz Tune 15 RESPONSE (dB) 10 5 0 -5 -10 -15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 15 S21 S11 S22 10 5 0 -5 -10 -15 -20 0.1 0.9 O -20 0.1 S21 S11 S22 20 RESPONSE (dB) 20 Broadband Gain & Return Loss @ 700mA B SO Broadband Gain & Return Loss @ 400mA 0.2 0.3 FREQUENCY (GHz) 18 18 16 16 GAIN (dB) GAIN (dB) 20 14 8 0.1 0.3 0.4 0.5 0.6 FREQUENCY (GHz) 0.6 0.7 0.8 0.9 0.8 0.9 14 +25 C +85 C - 40 C 12 +25 C +85 C - 40 C 0.2 0.5 Gain vs. Temperature @ 700mA 20 10 0.4 FREQUENCY (GHz) Gain vs. Temperature @ 400mA 12 Amplifiers - Linear & Power - SMT 700 mA (R1 = 130 Ω) Parameter 10 0.7 0.8 0.9 8 0.1 0.2 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 450 MHz Tune -5 -5 RETURN LOSS (dB) 0 -10 +25 C +85 C - 40 C -25 0.3 0.4 0.5 0.6 0.4 0.7 B SO +25 C +85 C - 40 C 0.2 0.3 0.4 0.5 0.6 0.7 0.8 -5 -10 -20 0.1 0.9 +25 C +85 C - 40 C -15 0.2 0.3 FREQUENCY (GHz) 36 35 35 34 34 33 33 P1dB (dBm) 36 32 31 +25 C +85 C - 40 C 30 0.4 0.5 0.6 0.7 0.8 0.9 FREQUENCY (GHz) P1dB vs. Temperature @ 700 mA O P1dB (dBm) 0.6 0 -5 32 31 +25 C +85 C - 40 C 30 29 28 0.35 0.5 Output return Loss @ 700 mA P1dB vs. Temperature @ 400 mA 29 0.4 0.45 FREQUENCY (GHz) 3 -25 0.3 0.7 LE 0 -20 0.1 +25 C +85 C - 40 C FREQUENCY (GHz) Output return Loss @ 400 mA -15 -15 -20 FREQUENCY (GHz) -10 -10 TE -15 RETURN LOSS (dB) RETURN LOSS (dB) Input Return Loss @ 700 mA 0 -20 RETURN LOSS (dB) Amplifiers - Linear & Power - SMT Input Return Loss @ 400 mA 0.5 0.55 28 0.35 0.4 0.45 0.5 0.55 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 450 MHz Tune 36 35 35 34 34 Psat (dBm) 36 33 32 +25 C +85 C - 40 C +25 C +85 C - 40 C 31 30 30 29 0.35 0.4 0.45 0.5 29 0.35 0.55 0.45 0.5 0.55 FREQUENCY (GHz) Output IP3 vs. Output Power @ 400mA 55 Output IP3 vs. Output Power @ 700mA 55 +25 C +85 C - 40 C 50 45 B SO 50 +25 C +85 C - 40 C 40 35 20 21 22 23 24 25 26 27 28 45 40 35 29 20 SINGLE TONE POUT (dBm) O Noise Figure vs. Temperature @ 400mA NOISE FIGURE (dB) 12 +25 C +85 C - 40 C 0.4 0.5 FREQUENCY (GHz) 23 24 25 26 27 28 29 18 14 8 0.3 22 Noise Figure vs. Temperature @ 700mA 16 10 21 SINGLE TONE POUT (dBm) 18 NOISE FIGURE (dB) 0.4 LE FREQUENCY (GHz) IP3 (dB) 32 TE 31 33 Amplifiers - Linear & Power - SMT Psat vs. Temperature @ 700mA IP3 (dB) Psat (dBm) Psat vs. Temperature @ 400mA 0.6 0.7 16 14 +25 C +85 C - 40 C 12 10 0.3 0.4 0.5 0.6 0.7 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 450 MHz Tune -20 -25 -25 ISOLATION (dB) -20 -30 -35 -30 -35 -40 +25 C +85 C - 40 C TE +25 C +85 C - 40 C -40 -45 -50 0.2 0.3 0.4 0.5 0.6 0.7 -50 0.2 0.8 FREQUENCY (GHz) 0.3 0.4 0.5 0.6 0.7 0.8 Power Compression @ 400mA LE FREQUENCY (GHz) Power Compression @ 700mA 50 50 Pout Gain PAE 30 20 10 0 0 B SO 40 5 10 20 Pout Gain PAE 40 30 20 10 0 0 5 10 15 20 INPUT POWER (dBm) O INPUT POWER (dBm) 15 Pout (dBm), GAIN (dB), PAE (%) ISOLATION (dB) Reverse Isolation vs. Temperature 700mA -45 Pout (dBm), GAIN (dB), PAE (%) Amplifiers - Linear & Power - SMT Reverse Isolation vs. Temperature 400mA 5 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 900 MHz Tune Broadband Gain & Return Loss @ 400 mA Broadband Gain & Return Loss @ 700 mA 20 10 0 -10 -20 0.3 0.5 0.7 0.9 1.1 1.3 0.5 0.7 1.3 Gain vs. Temperature @ 700 mA B SO 16 +25 C +85 C - 40 C 0.8 0.9 1 +25 C +85 C - 40 C 12 8 0.7 1.1 0.8 FREQUENCY (GHz) O Input Return Loss vs. Temperature 400mA 1 1.1 Input Return Loss vs. Temperature 700mA 0 +25 C +85 C - 40 C +25 C +85 C - 40 C -5 RETURN LOSS (dB) -5 0.9 FREQUENCY (GHz) 0 RETURN LOSS (dB) 1.1 20 16 -10 -15 -20 -25 0.7 0.9 LE 20 GAIN (dB) -20 0.3 FREQUENCY (GHz) Gain vs. Temperature @ 400 mA 8 0.7 0 -10 FREQUENCY (GHz) 12 S21 S11 S22 TE RESPONSE (dB) S21 S11 S22 GAIN (dB) RESPONSE (dB) 10 Amplifiers - Linear & Power - SMT 20 -10 -15 -20 0.8 0.9 FREQUENCY (GHz) 1 1.1 -25 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 900 MHz Tune Output Return Loss @ 700mA -5 -5 RETURN LOSS (dB) 0 -10 0.8 0.9 1 1.1 B SO +25 C +85 C - 40 C 0.7 0.8 0.9 1 1.1 32 31 +25 C +85 C - 40 C 30 29 28 0.6 1.2 0.7 FREQUENCY (GHz) 0.9 1 1.1 1.2 Psat vs. Temperature @ 700 mA 35 34 34 33 33 Psat (dBm) 35 32 +25 C +85 C - 40 C 31 0.8 FREQUENCY (GHz) O Psat (dBm) 1.2 P1dB vs. Temperature @ 700 mA Psat vs. Temperature @ 400 mA 32 +25 C +85 C - 40 C 31 30 30 0.7 0.8 0.9 1 FREQUENCY (GHz) 7 1.1 33 32 29 0.6 1 34 33 28 0.6 0.9 LE 34 29 0.8 FREQUENCY (GHz) P1dB vs. Temperature @ 400 mA 30 +25 C +85 C - 40 C -15 -20 0.7 1.2 FREQUENCY (GHz) 31 -10 TE +25 C +85 C - 40 C -15 P1dB (dBm) RETURN LOSS (dB) 0 -20 0.7 P1dB (dBm) Amplifiers - Linear & Power - SMT Output Return Loss @ 400mA 1.1 1.2 29 0.6 0.7 0.8 0.9 1 1.1 1.2 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 900 MHz Tune Power Compression @ 400 mA Power Compression @ 700 mA Pout (dBm), GAIN (dB), PAE (%) 10 20 10 0 0 2 7 12 17 2 22 7 17 22 LE Output IP3 vs. Output Power @ 400 mA 55 Output IP3 vs. Output Power @ 700 mA 55 +25 C +85 C - 40 C 45 40 35 20 50 B SO 50 22 24 26 45 +25 C +85 C - 40 C 40 35 28 20 22 SINGLE TONE POUT (dBm) 14 12 12 NOISE FIGURE (dB) 14 10 8 +25 C +85 C - 40 C 6 4 0.7 0.8 0.9 1 1.1 FREQUENCY (GHz) 1.2 24 26 28 SINGLE TONE POUT (dBm) Noise Figure vs. Temperature 700 mA O Noise Figure vs. Temperature 400 mA NOISE FIGURE (dB) 12 INPUT POWER (dBm) INPUT POWER (dBm) IP3 (dB) Pout Gain PAE 30 TE 20 IP3 (dB) Pout (dBm), GAIN (dB), PAE (%) Pout Gain PAE 30 Amplifiers - Linear & Power - SMT 40 40 10 8 +25 C +85 C - 40 C 6 1.3 4 0.7 0.8 0.9 1 1.1 1.2 1.3 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 8 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 900 MHz Tune Reverse Isolation vs. Temperature 700mA Reverse Isolation vs. Temperature 400mA -10 -15 -20 ISOLATION (dB) +25 C +85 C - 40 C -25 +25 C +85 C - 40 C -20 -25 -30 TE -30 -35 -35 -40 0.7 0.8 0.9 1 -40 0.7 1.1 FREQUENCY (GHz) 0.8 0.9 1 1.1 FREQUENCY (GHz) ACPR vs. Temperature @ 880 MHz CDMA 2000, 9 Channels Forward, 400 mA LE ACPR vs. Temperature @ 880 MHz CDMA 2000, 9 Channels Forward, 700 mA -30 -30 -40 -40 -50 -60 -70 B SO +25C +85C -40C CDMA IS95 Frequency: 880 MHz Integration BW: 1.228 MHz Forward Link, 9 Channels -80 -90 14 16 18 20 22 24 26 ACPR (dBc) ISOLATION (dB) -15 ACPR (dBc) Amplifiers - Linear & Power - SMT -10 +25C +85C -40C -50 -60 -70 CDMA IS95 Frequency: 880 MHz Integration BW: 1.228 MHz Forward Link, 9 Channels -80 -90 14 16 18 20 22 24 26 CHANNEL POWER (dBm) CHANNEL POWER (dBm) O Output IP3 vs. Bias Current 55 IP3 (dB) 50 45 400mA 500mA 600mA 700mA 40 35 20 22 24 26 28 SINGLE TONE POUT (dBm) 9 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 1900 MHz Tune 10 10 5 RESPONSE (dB) 15 S21 S11 S22 0 1.6 1.8 2 2.2 2.4 LE B SO GAIN (dB) +25 C +85 C - 40 C 1.8 1.9 2 2.1 10 +25 C +85 C - 40 C 8 6 4 1.7 2.2 O Input Return Loss @ 400 mA 1.8 2.1 2.2 2.1 2.2 0 RETURN LOSS (dB) +25 C +85 C - 40 C -8 1.9 2 Input Return Loss @ 700 mA -4 1.8 1.9 FREQUENCY (GHz) 0 RETURN LOSS (dB) 2.2 Gain vs. Temperature @ 700 mA FREQUENCY (GHz) -12 1.7 2 12 12 4 1.7 1.8 14 14 6 1.6 FREQUENCY (GHz) Gain vs. Temperature @ 400 mA 8 -5 -15 1.4 2.4 FREQUENCY (GHz) 10 0 -10 -10 -15 1.4 S21 S11 S22 TE -5 5 Amplifiers - Linear & Power - SMT Broadband Gain & Return Loss @ 700 mA 15 GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss @ 400 mA 2 FREQUENCY (GHz) 2.1 2.2 +25 C +85 C - 40 C -4 -8 -12 1.7 1.8 1.9 2 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 10 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 1900 MHz Tune Output Return Loss @ 400 mA Output Return Loss @ 700 mA RETURN LOSS (dB) +25 C +85 C - 40 C -8 1.8 1.9 2 2.1 P1dB (dBm) B SO +25 C +85 C - 40 C 1.8 1.9 2 2.1 32 +25 C +85 C - 40 C 31 30 29 1.7 2.2 1.8 2 2.1 2.2 Psat vs. Temperature @ 700 mA 35 34 34 Psat (dBm) 35 33 +25 C +85 C - 40 C 32 1.9 FREQUENCY (GHz) O Psat (dBm) 2.2 33 Psat vs. Temperature @ 400 mA 31 33 +25 C +85 C - 40 C 32 31 1.8 1.9 2 FREQUENCY (GHz) 11 2.1 P1dB vs. Temperature @ 700 mA FREQUENCY (GHz) 30 1.7 2 34 33 29 1.7 1.9 LE 34 30 1.8 FREQUENCY (GHz) P1dB vs. Temperature @ 400 mA 31 -8 -12 1.7 2.2 FREQUENCY (GHz) 32 +25 C +85 C - 40 C -4 TE RETURN LOSS (dB) 0 -4 -12 1.7 P1dB (dBm) Amplifiers - Linear & Power - SMT 0 2.1 2.2 30 1.7 1.8 1.9 2 2.1 2.2 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 1900 MHz Tune Output IP3 vs. Output Power @ 400 mA Output IP3 vs. Output Power @ 700 mA +25 C +85 C - 40 C IP3 (dB) 50 +25 C +85 C - 40 C 40 40 35 35 20 22 24 26 20 28 +25 C +85 C - 40 C 4 1.7 1.8 1.9 2 2.1 10 8 6 4 1.7 2.2 1.8 -10 -15 -15 -25 -30 -35 2 2.1 2.2 Reverse Isolation vs. Temperature 700 mA -10 +25 C +85 C - 40 C 1.9 FREQUENCY (GHz) ISOLATION (dB) ISOLATION (dB) O Reverse Isolation vs. Temperature 400 mA -20 +25 C +85 C - 40 C 12 FREQUENCY (GHz) -40 1.7 28 Noise Figure vs. Temperature @ 700 mA B SO 12 6 26 14 14 8 24 SINGLE TONE POUT (dBm) Noise Figure vs. Temperature @ 400 mA 10 22 LE SINGLE TONE POUT (dBm) NOISE FIGURE (dB) 45 TE 45 NOISE FIGURE (dB) IP3 (dB) 50 Amplifiers - Linear & Power - SMT 55 55 +25 C +85 C - 40 C -20 -25 -30 -35 1.8 1.9 2 FREQUENCY (GHz) 2.1 2.2 -40 1.7 1.8 1.9 2 2.1 2.2 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 12 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 1900 MHz Tune Power Compression @ 400 mA Power Compression @ 700 mA Pout (dBm), GAIN (dB), PAE (%) Pout Gain PAE 30 Pout Gain PAE 30 20 TE 20 10 10 0 0 5 10 15 20 25 0 INPUT POWER (dBm) 5 10 20 25 ACPR vs. Temperature @ 1960 MHz CDMA 2000, 9 Channels Forward, 700 mA LE ACPR vs. Temperature @ 1960 MHz CDMA 2000, 9 Channels Forward, 400 mA -30 -30 +25C +85C -40C -40 -60 -80 -90 12 14 16 18 20 22 +25C +85C -40C -40 B SO CDMA 2000 Frequency: 1960 MHz Integration BW: 1.228 MHz Forward Link, 9 Channels -50 -70 24 CDMA 2000 Frequency: 1960 MHz Integration BW: 1.228 MHz Forward Link, 9 Channels -50 -60 -70 -80 -90 12 26 14 16 Output IP3 vs. Bias Current 18 20 22 24 26 CHANNEL POWER (dBm) CHANNEL POWER (dBm) O VDET Output Voltage vs. Temperature 55 3.5 3 400mA 500mA 600mA 700mA +25 C +85 C - 40 C 2.5 VDET (V) 50 IP3 (dB) 15 INPUT POWER (dBm) ACPR (dBc) Pout (dBm), GAIN (dB), PAE (%) 40 0 ACPR (dBc) Amplifiers - Linear & Power - SMT 40 45 2 1.5 1 40 0.5 0 35 20 22 24 26 SINGLE TONE POUT (dBm) 13 28 17 21 25 29 33 OUTPUT POWER (dBm) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2150 MHz Tune 10 10 5 RESPONSE (dB) 15 S21 S11 S22 0 2 2.1 2.2 B SO GAIN (dB) 10 +25 C +85 C - 40 C 2 2.1 2.2 8 +25 C +85 C - 40 C 6 4 2 1.9 2.3 O Input Return Loss @ 400 mA 2 2.2 2.3 2.2 2.3 Input Return Loss @ 700 mA 0 -2 +25 C +85 C - 40 C RETURN LOSS (dB) -4 2.1 FREQUENCY (GHz) 0 -2 RETURN LOSS (dB) 2.3 Gain vs. Temperature @ 700 mA FREQUENCY (GHz) -6 -8 -10 -12 -14 -16 1.9 2.2 12 10 2 1.9 2.1 LE 12 4 2 FREQUENCY (GHz) Gain vs. Temperature @ 400 mA 6 -5 -15 1.9 2.3 FREQUENCY (GHz) 8 0 -10 -10 -15 1.9 S21 S11 S22 TE -5 5 Amplifiers - Linear & Power - SMT Broadband Gain & Return Loss @ 700 mA 15 GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss @ 400 mA +25 C +85 C - 40 C -4 -6 -8 -10 -12 -14 2 2.1 FREQUENCY (GHz) 2.2 2.3 -16 1.9 2 2.1 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 14 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2150 MHz Tune Output Return Loss @ 400 mA Output Return Loss @ 700 mA 0 -2 -4 RETURN LOSS (dB) +25 C +85 C - 40 C -6 -8 -12 -14 -6 -8 -10 -12 -14 -16 1.9 2 2.1 2.2 -16 1.9 2.3 FREQUENCY (GHz) 2.1 2.2 2.3 LE P1dB vs. Temperature @ 400 mA P1dB vs. Temperature @ 700 mA 35 35 34 33 32 B SO 34 +25 C +85 C - 40 C 31 30 2 2.1 2.2 33 +25 C +85 C - 40 C 32 31 30 2 2.3 2.2 2.3 O Psat vs. Temperature @ 700 mA 36 35 35 34 34 Psat (dBm) 36 33 +25 C +85 C - 40 C 32 2.1 FREQUENCY (GHz) FREQUENCY (GHz) Psat (dBm) 2 FREQUENCY (GHz) Psat vs. Temperature @ 400 mA 33 +25 C +85 C - 40 C 32 31 31 30 30 2 2.1 2.2 FREQUENCY (GHz) 15 +25 C +85 C - 40 C -4 TE -10 P1dB (dBm) RETURN LOSS (dB) -2 P1dB (dBm) Amplifiers - Linear & Power - SMT 0 2.3 2 2.1 2.2 2.3 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2150 MHz Tune Output IP3 vs Output Power @ 400 mA Output IP3 vs Output Power @ 700 mA +25 C +85 C - 40 C IP3 (dB) 50 +25 C +85 C - 40 C 40 40 35 35 20 21 22 23 24 25 26 27 28 20 29 22 23 24 25 26 LE Noise Figure vs. Temperature @ 400 mA 14 27 28 29 Noise Figure vs. Temperature @ 700 mA 14 +25 C +85 C - 40 C 10 8 6 4 2 2.1 2.2 10 8 6 4 2.3 2 FREQUENCY (GHz) O Reverse Isolation vs. Temperature 400 mA -15 -15 ISOLATION (dB) -25 -30 -35 2.2 2.3 Reverse Isolation vs. Temperature 700 mA -10 +25 C +85 C - 40 C 2.1 FREQUENCY (GHz) -10 -20 +25 C +85 C - 40 C 12 B SO 12 ISOLATION (dB) 21 SINGLE TONE POUT (dBm) SINGLE TONE POUT (dBm) NOISE FIGURE (dB) 45 TE 45 NOISE FIGURE (dB) IP3 (dB) 50 Amplifiers - Linear & Power - SMT 55 55 +25 C +85 C - 40 C -20 -25 -30 -35 -40 -40 2 2.1 2.2 FREQUENCY (GHz) 2.3 2 2.1 2.2 2.3 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 16 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2150 MHz Tune Power Compression @ 400 mA Power Compression @ 700 mA 40 Pout Gain PAE 30 20 10 0 Pout Gain PAE 30 20 TE Pout (dBm), GAIN (dB), PAE (%) Pout (dBm), GAIN (dB), PAE (%) 10 0 0 3 6 9 12 15 18 21 24 27 INPUT POWER (dBm) 0 3 6 9 12 15 18 21 24 27 B SO LE INPUT POWER (dBm) O Amplifiers - Linear & Power - SMT 40 17 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2700 MHz Tune 15 10 10 RESPONSE (dB) 15 5 S21 S11 S22 0 -5 -10 -10 -15 2.4 2.5 2.6 2.7 2.8 2.9 -15 2.4 3 2.5 2.7 2.8 2.9 3 2.9 3 LE Gain vs. Temperature @ 400 mA Gain vs. Temperature @ 700 mA 12 12 10 8 6 B SO 10 +25 C +85 C - 40 C 4 2 2.4 2.5 2.6 2.7 2.8 2.9 8 +25 C +85 C - 40 C 6 4 2 2.4 3 2.5 FREQUENCY (GHz) O Input Return Loss @ 400 mA 2.7 2.8 Input Return Loss @ 700 mA 0 +25 C +85 C - 40 C RETURN LOSS (dB) -4 2.6 FREQUENCY (GHz) 0 RETURN LOSS (dB) 2.6 FREQUENCY (GHz) FREQUENCY (GHz) GAIN (dB) S21 S11 S22 0 TE -5 5 Amplifiers - Linear & Power - SMT Broadband Gain & Return Loss @ 700 mA GAIN (dB) RESPONSE (dB) Broadband Gain & Return Loss @ 400 mA -8 +25 C +85 C - 40 C -4 -8 -12 -12 2.4 2.5 2.6 2.7 2.8 FREQUENCY (GHz) 2.9 3 -16 2.4 2.5 2.6 2.7 2.8 2.9 3 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 18 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2700 MHz Tune -2 -2 -4 RETURN LOSS (dB) 0 +25 C +85 C - 40 C -6 -8 -12 -16 2.4 2.5 2.6 2.7 2.8 2.9 -16 2.4 3 2.5 2.6 B SO +25 C +85 C - 40 C 2.6 2.7 2.8 2.9 3 33 32 +25 C +85 C - 40 C 31 30 2.5 2.9 2.6 36 35 35 34 34 Psat (dBm) 36 33 +25 C +85 C - 40 C 32 2.7 2.8 2.9 FREQUENCY (GHz) Psat vs. Temperature @ 700 mA O Psat (dBm) 2.8 34 FREQUENCY (GHz) 33 +25 C +85 C - 40 C 32 31 31 30 2.5 2.7 P1dB vs. Temperature @ 700 mA Psat vs. Temperature @ 400 mA 2.6 2.7 FREQUENCY (GHz) 19 -12 35 34 30 2.5 -10 LE 35 31 -8 FREQUENCY (GHz) P1dB vs. Temperature @ 400 mA 32 -6 -14 FREQUENCY (GHz) 33 +25 C +85 C - 40 C -4 TE -10 P1dB (dBm) RETURN LOSS (dB) Output Return Loss @ 700 mA 0 -14 P1dB (dBm) Amplifiers - Linear & Power - SMT Output Return Loss @ 400 mA 2.8 2.9 30 2.5 2.6 2.7 2.8 2.9 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2700 MHz Tune Output IP3 vs. Output Power @ 400 mA Output IP3 vs. Output Power @ 700 mA +25 C +85 C - 40 C IP3 (dB) 50 +25 C +85 C - 40 C 40 40 35 35 20 21 22 23 24 25 26 27 28 20 29 +25 C +85 C - 40 C 4 2.4 2.5 2.6 2.7 2.8 2.9 26 27 28 29 10 8 4 2.5 2.6 O 2.7 2.8 2.9 3 FREQUENCY (GHz) Reverse Isolation vs. Temperature 700 mA -10 -10 +25 C +85 C - 40 C +25 C +85 C - 40 C -15 ISOLATION (dB) -15 +25 C +85 C - 40 C 6 3 Reverse Isolation vs. Temperature 400 mA ISOLATION (dB) 25 12 FREQUENCY (GHz) -20 -25 -30 -35 -40 2.4 24 Noise Figure vs. Temperature @ 700 mA B SO 12 6 23 14 14 8 22 LE Noise Figure vs. Temperature @ 400 mA 10 21 SINGLE TONE POUT (dBm) SINGLE TONE POUT (dBm) NOISE FIGURE (dB) 45 TE 45 NOISE FIGURE (dB) IP3 (dB) 50 Amplifiers - Linear & Power - SMT 55 55 -20 -25 -30 -35 2.5 2.6 2.7 2.8 FREQUENCY (GHz) 2.9 3 -40 2.4 2.5 2.6 2.7 2.8 2.9 3 FREQUENCY (GHz) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 20 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 2700 MHz Tune Output IP3 vs. Output Power @ 400 mA Output IP3 vs. Output Power @ 700 mA 40 Pout Gain PAE 30 20 10 Pout Gain PAE 30 20 TE Pout (dBm), GAIN (dB), PAE (%) Pout (dBm), GAIN (dB), PAE (%) 10 0 0 0 5 10 15 20 25 30 0 5 10 15 20 25 30 INPUT POWER (dBm) B SO LE INPUT POWER (dBm) O Amplifiers - Linear & Power - SMT 40 21 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz 40 35 35 30 30 Icc1 + Ien (mA) Icc1+Ien 25 20 10 20 Icc1+Ien 15 10 5 5 0 0 20 21 22 23 24 25 26 27 28 29 20 1200 500 20 25 26 27 28 29 28 29 Icc2 vs. Output Power @ 700 mA 1000 B SO 600 24 1100 1000 700 23 1200 1100 800 22 Pout (dBm) Icc2 vs. Output Power @ 400 mA 900 21 LE Pout (dBm) Icc2 (mA) 25 TE 15 21 22 23 24 25 26 27 28 29 Icc2 (mA) Icc1 + Ien (mA) Icc1 + IEN vs. Output Power @ 700 mA 40 900 800 700 600 500 20 21 22 Pout (dBm) O Absolute Maximum Ratings Collector Bias Voltage (Vcc1, Vcc2) +5.5V RF Input Power (RFIN) +21 dBm @ 900 MHz +26 dBm @ 1900 MHz Junction Temperature 150 °C Continuous Pdiss (T = 85 °C) (derate 67.9 mW/°C above 85 °C) 4.4 W Thermal Resistance (junction to ground paddle) 14.72 °C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1C 24 25 Pout (dBm) 26 27 Recommended Bias Resistor Value Bias Current vs. R1, Ven = 5V Vcc1 = Vcc2 (V) 5V R1 (Ohms) Ien + Icc1 + Icc2 (mA) 270 420 225 522 175 625 130 715 Bias Current vs. R1, Ven = 0V Vcc1 = Vcc2 (V) 5V ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 23 Amplifiers - Linear & Power - SMT Icc1 + IEN vs. Output Power @ 400 mA R1 (Ohms) Ien + Icc1 + Icc2 (mA) 270 2.6 225 2.6 175 2.6 130 2.6 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 22 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz TE LE NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO B SO Amplifiers - Linear & Power - SMT Outline Drawing Package Information PCB RF GROUND. Part Number Package Body Material Lead Finish HMC921LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL1 [2] Package Marking [1] H921 XXXX [1] 4-Digit lot number XXXX [2] Max peak reflow temperature of 260 °C Pin Descriptions Function 1 - 3, 6 - 10, 12 - 14, 18, 19, 21, 22, 24 N/C The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 4 RFIN This pin is DC coupled. Off chip matching components are required. See Application Circuit herein. 15 - 17 RFOUT / Vcc2 RF output and DC Bias input for the amplifier. Off chip matching components are required. See Application Circuit herein. 5 GND These pins & package bottom must be connected to RF/DC ground. 11 VDET DC voltage output proportional to RFOUT signal. 20 VEN Power control pin. This voltage can be reduced or R1 resistor value increased to reduce quiescent current. For full power down, apply < 0.5V 23 Vcc1 DC power supply pin for bias circuitry O Pin Number 23 Description Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz List of Materials for 450 MHz Evaluation PCB 131903 Item J1, J2 J3, J4 C1, C9 SMA Connector DC Pin 30 pF Capacitor, 0402 Pkg. 15 pF Capacitor, 0402 Pkg. O C2 Description C3 27 pF Capacitor, 0402 Pkg. C4 - C6, C11 100 pF Capacitor, 0402 Pkg. C9, C20 2.2 uF Capacitor, Case A C12, C16, C18 1000 pF Capacitor, 0402 Pkg. R1 130 ohms Resistor, 0603 Pkg. L1 3.6 nH Inductor, 0402 Pkg. L2 4.7 nH Inductor, 0402 Pkg. L3 150 nH Inductor, 0603 Pkg. U1 HMC921LP4E Amplifier PCB [2] 131901 Evaluation PCB [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. Amplifiers - Linear & Power - SMT B SO LE TE 450 MHz Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25 FR Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 24 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz B SO LE TE This circuit was used to specify the performance for 350 - 500 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. * R1 = 130 Ohms for 700 mA bias, 270 Ohms for 400 mA bias. O Amplifiers - Linear & Power - SMT 450 MHz Application Circuit 25 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz List of Materials for 900 MHz Evaluation PCB 130007 Item J1 - J2 PCB Mount SMA Connector 2 mm DC Header O J3 - J4 Description C1 22 pF Capacitor, 0402 Pkg. C2 7.5 pF Capacitor, 0402 Pkg. C3 5.6 pF Capacitor, 0402 Pkg. C4, C9 2.2 µF Capacitor, Tantalum C5, C7, C10 1000 pF Capacitor, 0603 Pkg. C6, C8, C11, C14, C15 100 pF Capacitor, 0402 Pkg. C12, C13 8.2 pF Capacitor, 0402 Pkg. L1 0.78 nH Inductor, 0402 Pkg. L2 48 nH Inductor, 0402 Pkg. R1 130 Ohms Resistor, 0603 Pkg. U1 HMC921LP4E Linear Amplifier PCB [2] 130005 Evaluation PCB [1] Amplifiers - Linear & Power - SMT B SO LE TE 900 MHz Evaluation PCB The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25 FR Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 26 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz B SO LE TE This circuit was used to specify the performance for 800 - 1000 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. * R1 = 130 Ohms for 700 mA bias, 270 Ohms for 400 mA bias. O Amplifiers - Linear & Power - SMT 900 MHz Application Circuit 27 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz List of Materials for 1900 MHz Evaluation PCB 130008 Item J1 - J2 PCB Mount SMA Connector 2 mm DC Header O J3 - J4 Description C1 0.9 pF Capacitor, 0402 Pkg. C2 0.9 pF Capacitor, 0402 Pkg. C3 1.8 pF Capacitor, 0402 Pkg. C4, C9 2.2 µF Capacitor, Tantalum C5, C7, C10 1000 pF Capacitor, 0603 Pkg. C6, C8, C11, C14, C15 100 pF Capacitor, 0402 Pkg. C12 3.6 pF Capacitor, 0402 Pkg. C13 2.7 pF Capacitor, 0402 Pkg. L1 18 nH Inductor, 0402 Pkg. R1 130 Ohms Resistor, 0603 Pkg. U1 HMC921LP4E Linear Amplifier PCB [2] 130090 Evaluation PCB [1] Amplifiers - Linear & Power - SMT B SO LE TE 1900 MHz Evaluation PCB The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 28 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz B SO LE TE This circuit was used to specify the performance for 1800 - 2000 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. * R1 = 130 Ohms for 700 mA bias, 270 Ohms for 400 mA bias. O Amplifiers - Linear & Power - SMT 1900 MHz Application Circuit 29 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz List of Materials for 2150 MHz Evaluation PCB 131924 Item J1, J2 J3, J4 C1 SMA Connector DC Pin 3.9 pF Capacitor, 0402 Pkg. 4.3 pF Capacitor, 0402 Pkg. O C2, C8 Description C7 1.8 pF Capacitor, 0402 Pkg. C3 - C6, C11 100 pF Capacitor, 0402 Pkg. C15, C16, C17 1000 pF Capacitor, 0402 Pkg. C18, C19 2.2 uF Capacitor, Case A. R1 130 ohms Resistor, 0603 Pkg. L1 10 nH Inductor, 0603 Pkg. U1 HMC921LP4E Amplifier PCB [2] 131905 Evaluation PCB [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. Amplifiers - Linear & Power - SMT B SO LE TE 2150 MHz Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25 FR Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 30 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz B SO LE TE This circuit was used to specify the performance for 2000 - 2200 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. * R1 = 130 Ohms for 700 mA bias, 270 Ohms for 400 mA bias. O Amplifiers - Linear & Power - SMT 2150 MHz Application Circuit 31 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz O List of Materials for 2700 MHz Evaluation PCB 131907 Item Description J1, J2 SMA Connector J3, J4 DC Pin C1, C2 2.4 pF Capacitor, 0402 Pkg. C7 1.3 pF Capacitor, 0402 Pkg. C3 - C6, C11 100 pF Capacitor, 0402 Pkg. C15, C16, C17 1000 pF Capacitor, 0402 Pkg. C18, C19 2.2 uF Capacitor, Case A. R1 130 ohms Resistor, 0603 Pkg. L1 10 nH Inductor, 0603 Pkg. U1 HMC921LP4E Amplifier PCB [2] 131905 Evaluation PCB Amplifiers - Linear & Power - SMT B SO LE TE 2700 MHz Evaluation PCB [1] The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25 FR Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 32 HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz B SO LE TE This circuit was used to specify the performance for 2500 - 2800 MHz operation. Contact the HMC Applications Group for assistance in optimizing performance for your application. * R1 = 130 Ohms for 700 mA bias, 270 Ohms for 400 mA bias. O Amplifiers - Linear & Power - SMT 2700 MHz Application Circuit 33 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC921LP4E v02.0312 GaAs HBT MMIC 2 WATT POWER AMPLIFIER, 0.4 - 2.7 GHz Amplifiers - Linear & Power - SMT O B SO LE TE Notes: Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 34