5962-87716022A

MUX-08 and MUX08BRC/883 is Obsolete See the updated Ordering Guide section at the end of this data sheet for ordering information. The MUX-24 and MUX08BRC/883 are no longer available. Several products are now obsolete, including the MUX-24 and MUX08BRC/883. For products that are available as of the current revision of this data sheet, see the updated Outline Dimensions and Ordering Guide sections. Rev. C Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibilityis assumedby Analog Devices for its use, nor for anyinfringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©1978–2019 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com REV. C 425 REV. C MUX-24NT MUX-24N MUX-24G MUX-24NT MUX-24N MUX-24G REV. C REV. C REV. C REV. C REV. C REV. C REV. C REV. C MUX-08 Data Sheet OUTLINE DIMENSIONS 0.100 (2.54) 0.064 (1.63) 0.358 (9.09) 0.342 (8.69) SQ 0.095 (2.41) 0.075 (1.90) 0.011 (0.28) 0.007 (0.18) R TYP 0.358 (9.09) MAX SQ SIDE VIEW 0.075 (1.91) REF 18 0.015 (0.38) MIN 3 19 20 4 0.028 (0.71) 0.022 (0.56) 1 BOTTOM VIEW 0.050 (1.27) BSC 8 14 9 13 0.055 (1.40) 0.045 (1.14) 0.088 (2.24) 0.054 (1.37) PKG-000045 0.200 (5.08) REF 0.100 (2.54) REF 0.075 (1.91) REF 45° TYP 0.150 (3.81) BSC 12-05-2017-B 0.049 (1.24) 0.041 (1.04) CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF INCH EQUI VALENTS FOR REFERENCE ON LY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 6. 20-Terminal Ceramic Leadless Chip Carrier [LCC] (E-20-1) Dimensions shown in inches and (millimeters) 0.775 0.755 0.735 1 0.100 BSC 0.210 MAX 8 0.280 0.250 0.240 TOP VIEW SIDE VIEW 0.325 0.310 0.300 0.195 0.130 0.115 0.015 MIN 0.150 0.130 0.115 0.022 0.018 0.015 0.070 0.045 0.060 0.039 0.055 0.030 0.015 GAUGE PLANE END VIEW SEATING PLANE 0.021 0.016 0.011 0.012 0.010 0.008 0.430 MAX 03-07-2014-D 9 16 PIN 1 INDICATOR COMPLIANT TO JEDEC STANDARDS MS-001-BB Figure 7. 16-Lead Plastic Dual In-Line Package [PDIP] Narrow Body (N-16) Dimensions shown in inches 0.005 (0.13) MIN 0.098 (2.49) MAX 16 9 1 PIN 1 8 0.310 (7.87) 0.220 (5.59) 0.100 (2.54) BSC 0.840 (21.34) MAX 0.200 (5.08) MAX 0.200 (5.08) 0.125 (3.18) 0.023 (0.58) 0.014 (0.36) 0.320 (8.13) 0.290 (7.37) 0.060 (1.52) 0.015 (0.38) 0.150 (3.81) MIN SEATING 0.070 (1.78) PLANE 0.030 (0.76) 15° 0° 0.015 (0.38) 0.008 (0.20) CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 8. 16-Lead Ceramic Dual In-Line Package [CERDIP] (Q-16) Dimensions shown in inches and (millimeters) Rev. C | Page 12 of 14 Data Sheet MUX-08 10.00 (0.3937) 9.80 (0.3858) 4.00 (0.1575) 3.80 (0.1496) 9 16 1 8 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0039) COPLANARITY 0.10 0.51 (0.0201) 0.31 (0.0122) 6.20 (0.2441) 5.80 (0.2283) 1.75 (0.0689) 1.35 (0.0531) SEATING PLANE 0.50 (0.0197) 0.25 (0.0098) 45° 8° 0° 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) 060606-A COMPLIANT TO JEDEC STANDARDS MS-012-AC CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 9. 16-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-16) Dimensions shown in millimeters and (inches) ORDERING GUIDE Model1 MUX08EPZ MUX08EQ MUX08FPZ MUX08FQ MUX08FSZ MUX08NBC 5962-8771601EA 5962-87716022A 5962-8771602EA MUX08AQ/883C MUX08BQ/883C 1 Temperature Range 0°C to 70°C −25°C to +85°C −40°C to +85°C −25°C to +85°C −40°C to +85°C 25°C −55°C to +125°C −55°C to +125°C −55°C to +125°C −55°C to +125°C −55°C to +125°C Package Description 16-Lead PDIP 16-Lead CERDIP 16-Lead PDIP 16-Lead CERDIP 16-Lead SOIC_N DIE 16-Lead CERDIP 20-Terminal Ceramic LCC 16-Lead CERDIP 16-Lead CERDIP 16-Lead CERDIP Z = RoHS Compliant Part Rev. C | Page 13 of 14 Package Option N-16 Q-16 N-16 Q-16 R-16 Q-16 E-20-1 Q-16 Q-16 Q-16 MUX-08 Data Sheet REVISION HISTORY 5/2019—Rev. B to Rev C Obsoleted MUX-24 and MUX08BRC/883 ..................... Universal Deleted MUX-24 Functional Diagram........................................... 1 Changes to Features Section, Ordering information Section, and General Description Section ............................................................ 1 Changed MUX-08A/E MUX-24A/E Column to MUX-08A/E Column, Electrical Characteristics Table and MUX-08B/F MUX-24B/F Column to MUX-08B/F Column, Electrical Characteristics Table ......................................................................... 2 Changed MUX-08A/MUX-24A Column to MUX-08A Column and MUX-08B/MUX-24B Column to MUX-08B Column, Electrical Characteristics Table, and MUX-08E/MUX-24E Column to MUX-08E Column and MUX-08F/MUX-24F Column to MUX-08F Column, Electrical Characteristics Table ........................ 3 Change to “ON” Resistance Parameter, MUX-08A...................... 3 Deleted MUX-24 Dice Characteristics........................................... 4 Deleted MUX-24 Logic State Table ................................................ 5 Deleted Differential Multiplexers and Figure 6 .......................... 10 Added Outlines Dimension Section ............................................. 12 Added Ordering Guide .................................................................. 13 ©1978–2019 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D11927-0-5/19(C) Rev. C | Page 14 of 14