AD7306AN

a +5 V Powered RS-232/RS-422 Transceiver AD7306 FEATURES RS-232 and RS-422 on One Chip Single +5 V Supply 0.1 mF Capacitors Short Circuit Protection Excellent Noise Immunity Low Power BiCMOS Technology High Speed, Low Skew RS-422 Operation –408C to +858C Operations FUNCTIONAL BLOCK DIAGRAM APPLICATIONS DTE-DCE Interface Packet Switching Local Area Networks Data Concentration Data Multiplexers Integrated Services Digital Network (ISDN) GENERAL DESCRIPTION The AD7306 line driver/receiver is a 5 V monolithic product which provides an interface between TTL signal levels and dual standard EIA RS-232/RS-422 signal levels. The part contains two RS-232 drivers, one RS-422 driver, one RS-232 receiver, and one receiver path which can be configured either as RS-232 or as RS-422. An internal charge pump voltage converter facilitates operation from a single +5 V power supply. The internal charge pump generates ± 10 V levels allowing RS-232 output levels to be developed without the need for external bipolar power supplies. A highly efficient charge pump design allows operation using non polarized, miniature 0.1 µF capacitors. This gives a considerable saving in printed circuit board space over conventional products which can use up to 10 µF capacitors. The charge pump output voltages may also be used to power external circuitry which requires dual supplies. Rev. D V+ 1 24 V– C1+ 2 23 C2– C1– 3 22 C2+ R2 IN 4 21 R2 OUT T1OUT 5 20 T1IN T2OUT 6 19 T2IN VCC 7 18 GND 17 R1 OUT AD7306 SOIC TOP VIEW (Not to Scale) R1 IN (B) 8 R1 IN /R1 IN (A) 9 16 T3IN T3OUT (B) 10 15 232/422 SEL T3OUT (A) 11 14 GND NC 12 13 NC NC = NO CONNECT The RS-232 channels are suitable for communications rates up to 100 kHz and the RS-422 channels are suitable for high speed communications up to 5 MHz. The RS-422 transmitter complementary outputs are closely matched and feature low timing skew between the complementary outputs. This is often an essential requirement to meet tight system timing specifications. All inputs feature ESD protection, all driver outputs feature high source and sink current capability and are internally protected against short circuits on the outputs. An epitaxial layer is used to guard against latch-up. The part is available in a 24-lead SOIC and 24-pin plastic DIP package. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2018 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com AD7306–SPECIFICATIONS (VT CC MAX Parameter RS-232 DRIVER TTL Input Logic Low, VINL TTL Input Logic High, VINH Input Logic Current RS-232 High Level Output Voltage RS-232 Low Level Output Voltage Output Short Circuit Current Slew Rate Output Resistance (Powered Down) RS-232 RECEIVER Input Voltage Range RS-232 Input Threshold Low RS-232 Input Threshold High RS-232 Input Hysteresis RS-232 Input Resistance TTL Output Voltage Low, VOL TTL Output Voltage High, VOH RS-422 DRIVER TTL Input Logic Low, VINL TTL Input Logic High, VINH Logic Input Current Differential Output Voltage = +5 V 6 5%, C1 = C2 = C3 = C4 = 0.1 mF. All specifications TMIN to unless otherwise noted.) Min Typ 2.0 5.0 –5.0 ±5 8 300 –15 0.8 0.1 3 3.5 0.1 7.3 –6.5 ± 12 20 4 10M Max Units Test Conditions/Comments 0.8 V V µA V V mA V/µs V/µs Ω VIN = 0 V to VCC RL = 3 kΩ RL = 3 kΩ VOUT = 0 V, TA = 0°C to +70°C CL = 50 pF, RL = 3 kΩ CL = 2500 pF, RL = 3 kΩ VCC = 0 V, VOUT = ± 3 V V V V V kΩ V V IOUT = +4 mA IOUT = –4 mA ± 10 30 +15 1.3 1.7 0.4 5 0.2 4.8 2.4 1.0 7 0.4 0.8 2.0 0.1 ± 10 5.0 2 Common-Mode Output Voltage ∆|VOUT| for Complementary O/P States Output Short Circuit Current RS-422 RECEIVER Common-Mode Voltage Range Differential Input Threshold Voltage Input Voltage Hysteresis Input Resistance TTL Output Voltage Low, VOL TTL Output Voltage High, VOH 232/422 SEL Input Input Logic Low, VINL Input Logic High, VINH Logic Input Current 35 3 0.2 150 –0.2 ±7 +0.2 3 3.5 70 5 0.2 4.8 7 0.4 0.8 V V µA V V V V mA VIN = 0 V to VCC VCC = 5 V, RL Diff = ∞; Figure 3 RL Diff = 100 Ω; Figure 3 RL Diff = 100 Ω 0 V ≤ VCMR ≤ +7 V V V mV kΩ V V Typical RS-422 Input Voltage