AD8022ARMZ-REEL7

Dual High Speed, Low Noise Op Amp AD8022 Data Sheet FUNCTIONAL BLOCK DIAGRAM Low power amplifiers provide low noise and low distortion, ideal for xDSL modem receiver Wide supply range: +5 V, ±2.5 V to ±12 V voltage supply Low power consumption: 4.0 mA/Amp Voltage feedback Ease of Use Lower total noise (insignificant input current noise contribution compared to current feedback amps) Low noise and distortion 2.5 nV/√Hz voltage noise @ 100 kHz 1.2 pA/√Hz current noise MTPR < −66 dBc (G = +7) SFDR 110 dB @ 200 kHz High speed 130 MHz bandwidth (−3 dB), G = +1 Settling time to 0.1%, 68 ns 50 V/μs slew rate High output swing: ±10.1 V on ±12 V supply Low offset voltage, 1.5 mV typical OUT1 1 –IN1 2 +IN1 3 AD8022 7 OUT2 – + – + –VS 4 8 +VS 6 –IN2 5 +IN2 01053-001 FEATURES Figure 1. APPLICATIONS Receiver for ADSL, VDSL, HDSL, and proprietary xDSL systems Low noise instrumentation front end Ultrasound preamps Active filters 16-bit ADC buffers 100 In an xDSL line interface circuit, the AD8022’s op amps can be configured as the differential receiver from the line transformer or as independent active filters. 10 eN (nV/ Hz) 01053-002 The AD8022 consists of two low noise, high speed, voltage feedback amplifiers. Each amplifier consumes only 4.0 mA of quiescent current, yet has only 2.5 nV/√Hz of voltage noise. These dual amplifiers provide wideband, low distortion performance, with high output current optimized for stability when driving capacitive loads. Manufactured on ADI’s high voltage generation of XFCB bipolar process, the AD8022 operates on a wide range of supply voltages. The AD8022 is available in both an 8-lead MSOP and an 8-lead SOIC. Fast over voltage recovery and wide bandwidth make the AD8022 ideal as the receive channel front end to an ADSL, VDSL, or proprietary xDSL transceiver design. (pA/ Hz, nV/ Hz) GENERAL DESCRIPTIONS iN (pA/ Hz) 1 10 100 1k 10k 100k FREQUENCY (Hz) 1M 10M Figure 2. Current and Voltage Noise vs. Frequency Rev. C Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©2011 Analog Devices, Inc. All rights reserved. AD8022 Data Sheet TABLE OF CONTENTS Specifications..................................................................................... 3 DMT Modulation and Multitone Power Ratio (MTPR)....... 13 Absolute Maximum Ratings............................................................ 5 Channel Capacity and SNR....................................................... 13 Maximum Power Dissipation ..................................................... 5 Power Supply and Decoupling.................................................. 13 ESD Caution.................................................................................. 5 Layout Considerations............................................................... 15 Typical Performance Characteristics ............................................. 6 Outline Dimensions ....................................................................... 16 Theory of Operation ...................................................................... 12 Ordering Guide .......................................................................... 16 Applications..................................................................................... 13 REVISION HISTORY 8/11—Rev. B to Rev. C Changes to Figure 40 ......................................................................14 Updated Outline Dimensions........................................................16 Changes to Ordering Guide...........................................................16 5/05—Rev. A to Rev. B Changes to Format .............................................................Universal Deleted Evaluation Boards Section.............................................. 14 Deleted Generating DMT Section................................................ 14 Changes to Ordering Guide.......................................................... 16 Updated Outline Dimensions....................................................... 16 9/02—Rev. 0 to Rev. A Changes to Features ..........................................................................1 Changes to Applications...................................................................1 Changes to Product Description .....................................................1 Changes to Functional Block Diagram ..........................................1 Changes to Figure 1...........................................................................1 Changes to Specifications Table......................................................2 Edits to TPCs 1, 2, 3, 6 ......................................................................5 New TPCs 7, 8....................................................................................6 Edits to TPCs 16, 17, 18....................................................................7 Edits to TPC 19 ..................................................................................8 Edits to TPC 28 ..................................................................................9 Edits to Figure 3...............................................................................11 Edits to Figure 6...............................................................................14 Updated Outline Dimensions........................................................16 Rev. C | Page 2 of 16 Data Sheet AD8022 SPECIFICATIONS At 25°C, VS = ±12 V, RL = 500 Ω, G = +1, TMIN = –40°C, TMAX = +85°C, unless otherwise noted. Table 1. Parameter DYNAMIC PERFORMANCE −3 dB Small Signal Bandwidth Bandwidth for 0.1 dB Flatness Large Signal Bandwidth 1 Slew Rate Rise and Fall Time Settling Time 0.1% Overdrive Recovery Time NOISE/DISTORTION PERFORMANCE Distortion Second Harmonic Third Harmonic Multitone Input Power Ratio 2 Voltage Noise (RTI) Input Current Noise DC PERFORMANCE Input Offset Voltage Conditions Min Typ VOUT = 50 mV p-p VOUT = 50 mV p-p VOUT = 4 V p-p VOUT = 2 V p-p, G = +2 VOUT = 2 V p-p, G = +2 VOUT = 2 V p-p VOUT = 150% of max output voltage, G = +2 110 130 25 4 50 30 62 200 MHz MHz MHz V/μs ns ns ns −95 −100 dBc dBc −67.2 −66 2.5 1.2 dBc dBc nV/√Hz pA/√Hz 40 VOUT = 2 V p-p fC = 1 MHz fC = 1 MHz G = +7 differential 26 kHz to 132 kHz 144 kHz to 1.1 MHz f = 100 kHz f = 100 kHz −1.5 72 20 0.7 −11.25 to +11.75 98 kΩ pF V dB ±10.1 ±10.6 ±55 100 75 V V mA mA pF ±120 2.5 TMIN to TMAX Open-Loop Gain INPUT CHARACTERISTICS Input Resistance (Differential) Input Capacitance Input Common-Mode Voltage Range Common-Mode Rejection Ratio OUTPUT CHARACTERISTICS Output Voltage Swing Linear Output Current Short-Circuit Output Current Capacitive Load Drive POWER SUPPLY Operating Range Quiescent Current Power Supply Rejection Ratio OPERATING TEMPERATURE RANGE 1 2 VCM = ±3 V RL = 500 Ω RL = 2 kΩ G = +1, RL = 150 Ω, dc error = 1% RS = 0 Ω,