AD8044AR-EBZ

Evaluation Board User Guide UG-111 One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com Evaluation Board for Quad, High Speed Op Amps Offered in 14-Lead SOIC Packages The 2-layer evaluation board accepts SMA edge-mounted connectors on the inputs and outputs for efficient connection to test equipment or other circuitry. The ground plane, component placement, and supply bypassing are designed to minimize parasitic inductance and capacitance. The evaluation board components are primarily SMT 0805 case size, with the exception of the electrolytic bypass capacitors (C1 and C2), which are 3528 case size. FEATURES Enables quick breadboarding/prototyping User-defined circuit configuration Edge-mounted SMA connector provisions Easy connection to test equipment and other circuits RoHS compliant GENERAL DESCRIPTION The Analog Devices, Inc., 14-lead SOIC evaluation board is designed to help users evaluate quad, high speed op amps offered in 14-lead SOIC packages. The evaluation board is a bare board (that is, there are no components or amplifier soldered to the board; these must be ordered separately) that enables users to quickly prototype a variety of quad op amp circuits. The evaluation board minimizes risk and reduces time to market. Figure 1 shows the component side of the bare evaluation board, and Figure 2 shows the circuit side. Figure 3 shows the evaluation board schematic. The PCB assembly drawings are shown in Figure 4 and Figure 5. The layout patterns for the PCB are shown in Figure 6 and Figure 7. NOTES 1. THE EVALUATION BOARD SILKSCREEN PART NUMBER LABELLING ON YOUR BOARD MAY BE DIFFERENT FROM WHAT IS SHOWN HERE. Figure 1. Component Side of Evaluation Board PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Figure 2. Circuit Side of Evaluation Board Rev. A | Page 1 of 8 08913-007 NOTES 1. THE EVALUATION BOARD SILKSCREEN PART NUMBER LABELLING ON YOUR BOARD MAY BE DIFFERENT FROM WHAT IS SHOWN HERE. 08913-001 EVALUATION BOARD COMPONENT AND CIRCUIT SIDES UG-111 Evaluation Board User Guide TABLE OF CONTENTS Features .............................................................................................. 1  General Description ......................................................................... 1  Evaluation Board Schematic, Assembly Drawings, and Layout Patterns ...............................................................................................3  Evaluation Board Component and Circuit Sides ......................... 1  Ordering Infomration .......................................................................5  Revision History ............................................................................... 2  Bill of Materials ..............................................................................5  REVISION HISTORY 4/11—Rev. 0 to Rev. A Changes to General Description Section ...................................... 1 Deleted EB-O14R-4Z Throughout ................................................. 1 3/10—Revision 0: Initial Version Rev. A | Page 2 of 8 Evaluation Board User Guide UG-111 EVALUATION BOARD SCHEMATIC, ASSEMBLY DRAWINGS, AND LAYOUT PATTERNS R9* R2* R10* OUT1 OUT4 R3* R1* R11* AGND GND1 GND2 GND3 GND4 AGND R4* R12* IN1- IN4R18* R5* AGND R13* AGND AGND R17* AGND AGND +VS R7* R14* IN1+ C3* IN4+ R8* R6* R15* +VS R27* +IN2 R26* R28* 1 2 3 4 5 VOUT1 -IN1 +IN1 +VS +IN2 6 -IN2 7 VOUT2 VOUT4 -IN4 +IN4 -VS +IN3 -IN3 VOUT3 AGND 14 13 12 11 10 AGND -VS C5* +VS AGND AGND -VS R22* +IN3 9 8 C4* R32* R21* AGND AGND AGND C2 10UF R16* U1 AGND AGND C1 10UF AGND R25* AGND R20* R19* OUT2 OUT3 R34* -VS R33* R31* USER DEFINED AGND AGND R30* -IN2 R24* -IN3 R36* R29* R23* R35* 08913-002 AGND AGND AGND AGND *USER DEFINED VALUE. 08913-005 08913-003 Figure 3. Evaluation Board Schematic Figure 4. Component Side Assembly Drawing Figure 5. Circuit Side Assembly Drawing Rev. A | Page 3 of 8 Evaluation Board User Guide Figure 6. Component Side Layout Pattern 08913-006 08913-004 UG-111 Figure 7. Circuit Side Layout Pattern Rev. A | Page 4 of 8 Evaluation Board User Guide UG-111 ORDERING INFORMATION BILL OF MATERIALS Table 1. Quantity 12 6 2 3 36 1 Reference Designator +IN2, +IN3, −IN2, −IN3, IN1+, IN1−, IN4+, IN4−, OUT1, OUT2, OUT3, OUT4 +VS, −VS, GND1, GND2, GND3, GND4 C1, C2 C3, C4, C5 R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36 U1 Rev. A | Page 5 of 8 Description SMA/SMT Test point 10 μF capacitor Capacitor, user defined Resistor, user-defined Package SMA/SMT TP 3528 C0805 R0805 Amplifier 14-lead SOIC UG-111 Evaluation Board User Guide NOTES Rev. A | Page 6 of 8 Evaluation Board User Guide UG-111 NOTES Rev. A | Page 7 of 8 UG-111 Evaluation Board User Guide NOTES ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. ©2010–2011 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG08913-0-4/11(A) Rev. A | Page 8 of 8