AD876JR-8-REEL

a FEATURES CMOS 10-Bit 20 MSPS Sampling A/D Converter Pin-Compatible 8-Bit Option Power Dissipation: 160 mW +5 V Single Supply Operation Differential Nonlinearity: 0.5 LSB Guaranteed No Missing Codes Power Down (Standby) Mode Three-State Outputs Digital I/Os Compatible with +5 V or +3.3 V Logic Adjustable Reference Input Small Size: 28-Lead SOIC, 28-Lead SSOP, or 48-Lead Thin Quad Flatpack (TQFP) 10-Bit 20 MSPS 160 mW CMOS A/D Converter AD876 FUNCTIONAL BLOCK DIAGRAM AVDD CLK SHA SHA GAIN The AD876 is a CMOS, 160 mW, 10-bit, 20 MSPS analog-todigital converter (ADC). The AD876 has an on-chip input sample-and-hold amplifier. By implementing a multistage pipelined architecture with output error correction logic, the AD876 offers accurate performance and guarantees no missing codes over the full operating temperature range. Force and sense connections to the reference inputs minimize external voltage drops. The AD876 can be placed into a standby mode of operation reducing the power below 50 mW. The AD876’s digital I/O interfaces to either +5 V or +3.3 V logic. Digital output pins can be placed in a high impedance state; the format of the output is straight binary coding. The AD876’s speed, resolution and single-supply operation ideally suit a variety of applications in video, multimedia, imaging, high speed data acquisition and communications. The AD876’s low power and single-supply operation satisfy requirements for high speed portable applications. Its speed and resolution ideally suit charge coupled device (CCD) input systems such as color scanners, digital copiers, electronic still cameras and camcorders. SHA DRVDD GAIN SHA REFTF GAIN STBY A/D AIN A/D D/A A/D D/A A/D D/A THREESTATE REFTS CORRECTION LOGIC REFBS REFBF AD876 OUTPUT BUFFERS (MSB) D9 D0 (LSB) CML PRODUCT DESCRIPTION DVDD AVSS DVSS DRVSS The AD876 comes in a space saving 28-lead SOIC and 48-lead thin quad flatpack (TQFP) and is specified over the commercial (0°C to +70°C) temperature range. PRODUCT HIGHLIGHTS Low Power The AD876 at 160 mW consumes a fraction of the power of presently available 8- or 10-bit, video speed converters. Powerdown mode and single-supply operation further enhance its desirability in low power, battery operated applications such as electronic still cameras, camcorders and communication systems. Very Small Package The AD876 comes in a 28-lead SOIC, 28-lead SSOP, and 48lead surface mount, thin quad flat package. The TQFP package is ideal for very tight, low headroom designs. Digital I/O Functionality The AD876 offers three-state output control. Pin Compatible Upgrade Path The AD876 offers the option of laying out designs for eight bits and migrating to 10-bit resolution if prototype results warrant. REV. B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781/329-4700 World Wide Web Site: http://www.analog.com Fax: 781/326-8703 © Analog Devices, Inc., 1998 (TMIN to T MAX with AVDD = +5.0 V, DVDD = +5.0 V, DRVDD = +3.3 V, VREFB = +4.0 V, VREFB = CLOCK = 20 MSPS, unless otherwise noted) AD876–SPECIFICATIONS +2.0 V, f Parameter Min RESOLUTION Input Capacitance POWER SUPPLIES Operating Voltage AVDD 1 DVDD1 DRVDD Operating Current IAVDD IDVDD IDRVDD 3.5 1.6 Max Units Bits ± 1.0 ± 0.5 ±1 GUARANTEED 0.4 0.2 LSB LSB % FSR % FSR 2 2 V p-p 5.0 5.0 pF 4.0 2.0 250 8.0 35 35 4.5 2.5 3.5 1.6 4.0 2.0 250 8.0 35 35 4.5 2.5 V V Ω mA mV mV 7.4 7.8 7.8 7.5 8.2 9.0 9.0 8.2 Bits Bits Bits 46 49 49 47 51 56 56 51 dB dB dB –62 –62 –60 –65 150 0.5 1 +4.5 +4.5 +3.0 POWER CONSUMPTION TEMPERATURE RANGE Specified AD876 Typ 10 ± 0.3 ± 1.0 ± 0.1 ± 0.75 GUARANTEED 0.1 0.1 ANALOG INPUT Input Range DYNAMIC PERFORMANCE Effective Number of Bits fIN = 1 MHz fIN = 3.58 MHz fIN = 10 MHz Signal-to-Noise and Distortion (S/N+D) Ratio fIN = 1 MHz fIN = 3.58 MHz fIN = 10 MHz Total Harmonic Distortion (THD) fIN =1 MHz fIN = 3.58 MHz fIN =10 MHz Spurious Free Dynamic Range2 Full Power Bandwidth Differential Phase Differential Gain Min 8 DC ACCURACY Integral Nonlinearity (INL) Differential Nonlinearity (DNL) No Missing Codes Offset Error Gain Error REFERENCE INPUT Reference Top Voltage Reference Bottom Voltage Reference Input Resistance Reference Input Current Reference Top Offset Reference Bottom Offset AD876JR-8 Typ Max –62 –62 –60 –65 150 0.5 1 –56 +5.25 +5.25 +5.25 +4.5 +4.5 +3.0 –56 dB dB dB dB MHz Degree % +5.25 +5.25 +5.25 Volts Volts Volts 20 12 0.1 25 16 1 20 12 0.1 25 16 1 mA mA mA 160 190 160 190 mW +70 °C 0 +70 0 NOTES 1 AVDD and DV DD must be within 0.5 V of each other to maintain specified performance levels. 2 3.58 MHz Input Frequency. Specifications subject to change without notice. See Definition of Specifications for additional information. –2– REV. B AD876 (TMIN to TMAX with AV DD = +5.0 V, DV DD = +5.0 V, DRVDD = +3.3 V, V REFT = +4.0 V, VREFB = +2.0 V, CLOCK = 20 MSPS, CL = 20 pF unless otherwise noted) DIGITAL SPECIFICATIONS f Parameter Symbol DRVDD Min LOGIC INPUT High Level Input Voltage VIH 2.4 4.0 4.2 Low Level Input Voltage VIL High Level Input Current Low Level Input Current Low Level Input Current (CLK Only) Input Capacitance IIH IIL IIL CIN 3.0 5.0 5.25 3.0 5.0 5.25 5.0 5.0 5.0 AD876 Typ 0.6 1.0 1.05 +10 +50 +10 –10 –50 –10 5 LOGIC OUTPUTS High Level Output Voltage (IOH = 50 µA) VOH (IOH = 0.5 mA) Low Level Output Voltage (IOL = 50 µA) VOL 3.0 5.0 5.0 2.4 3.8 2.4 0.7 1.05 0.4 –10 Symbol Min V V V V V V µA µA µA pF 10 V V V pF µA Max Units 5 COUT IOZ Units V V V 3.6 5.25 5.25 (IOL = 0.6 mA) Output Capacitance Output Leakage Current Max Specifications subject to change without notice. TIMING SPECIFICATIONS Maximum Conversion Rate1 Clock Period Clock High Clock Low Output Delay Pipeline Delay (Latency) Aperture Delay Time Aperture Jitter Typ 20 tC tCH tCL tOD 50 25 25 20 23 23 10 3.5 4 22 NOTE 1 Conversion rate is operational down to 10 kHz without degradation in specified performance. SAMPLE N SAMPLE N+1 SAMPLE N+2 AIN t CH t CL CLK t OD tC OUT DATA N-4 DATA N-3 DATA N-2 DATA N-1 Figure 1. Timing Diagram REV. B –3– DATA N MHz ns ns ns ns Clock Cycles ns ps AD876 PIN FUNCTION DESCRIPTIONS SOIC Pin No. TQFP Pin No. D0 (LSB) D1–D4 D5–D8 D9 (MSB) THREESTATE 3 4–7 8–11 12 16 STBY Symbol Type Name and Function 1 2–5 8–11 12 23 DO DO 17 24 DI CLK CML REFTF REFBF REFTS REFBS AIN AVDD AVSS DVDD DVSS DRVDD 15 26 22 24 21 25 27 28 1 18 14, 19, 20 2 22 38 30 34 29 35 39 42 44 26 17, 27, 28 45 DI AO AI AI AI AI AI P P P P P DRVSS 13 16 P Least Significant Bit. Data Bits 1 through 4. Data Bits 5 through 8. Most Significant Bit. THREE-STATE = LOW THREE-STATE = HIGH or N/C Normal Operating Mode High Impedance Outputs STBY = LOW or N/C STBY = HIGH Normal Operating Mode Standby Mode Clock Input. Bypass Pin for an Internal Bias Point. Reference Top Force. Reference Bottom Force. Reference Top Sense. Reference Bottom Sense. Analog Input. +5 V Analog Supply. Analog Ground. +5 V Digital Supply. Digital Ground. +3.3 V/+5 V Digital Supply. Supply for digital input and output buffers. +3.3 V/+5 V Digital Ground. Ground for digital input and output buffers. DO DI Type: AI = Analog Input; AO = Analog Output; DI = Digital Input; DO = Digital Output; P = Power. PIN CONFIGURATIONS AIN CML AVSS AVDD TQFP DRVDD SOIC/SSOP AVSS 1 28 AVDD DRVDD 2 27 AIN *D0 3 26 CML D0 1 36 *D1 4 25 REFBS D1 2 35 REFBS D2 5 24 REFBF D2 3 34 REFBF D3 6 23 NC D3 4 33 D4 7 22 REFTF D4 5 D5 8 21 REFTS 6 AD876 D6 9 20 DVSS 7 TOP VIEW (Not to Scale) D7 10 19 DVSS D5 8 29 REFTS D8 11 18 DVDD D6 9 28 DV SS 27 DV SS 41 40 39 38 37 32 31 30 REFTF 17 STBY D7 10 16 THREE-STATE D8 11 26 DV DD 15 CLK D9 12 25 –4– STBY DRVSS FOR THE AD876JR-8 NC = NO CONNECT CLK 13 14 15 16 17 18 19 20 21 22 23 24 * PINS D0 AND D1 ARE LEFT OPEN THREE-STATE DVSS 14 TOP VIEW (Not to Scale) DVSS D9 12 DRVSS 13 AD876 48 47 46 45 44 43 42 REV. B AD876 ORDERING GUIDE ABSOLUTE MAXIMUM RATINGS* Parameter With Respect to Min Max Units AVDD DVDD, DRVDD AVSS AIN REFTS, REFTF REFBS, REFBF Digital Inputs, CLK Junction Temperature Storage Temperature Lead Temperature (10 sec) AVSS DVSS, DRVSS DVSS, DRVSS AVSS –0.5 –0.5 –0.5 –0.5 +6.5 +6.5 +0.5 +6.5 Volts Volts Volts Volts AVSS DVSS, DRVSS –0.5 –0.5 +6.5 +6.5 +150 +150 Volts Volts °C °C –65 Temperature Range Model Package Description 28-Lead SOIC 48-Lead TQFP (Tape and Reel 13") 0°C to +70°C 28-Lead SOIC –40°C to +85°C 28-Lead SOIC –40°C to +85°C 28-Lead SSOP 0°C to +70°C 28-Lead SSOP 0°C to +70°C 28-Lead SSOP Package Options AD876JR 0°C to +70°C AD876JST-Reel 0°C to +70°C R-28 ST-48 AD876JR-8 AD876AR AD876ARS AD876JRS AD876JRS-8 R-28 R-28 RS-28 RS-28 RS-28 +300 °C *Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum ratings for extended periods may effect device reliability. DVDD DRVDD DVDD DVDD DRVDD DRVDD DVSS DVSS DVSS a) D0–D9 DVSS DRVSS DRVSS DRVSS b) Three-State, Standby c) CLK AVDD REFTF AVDD AVDD AVSS INTERNAL REFERENCE VOLTAGE REFTS AVSS AVSS AVDD d) AIN INTERNAL REFERENCE VOLTAGE REFBS AVDD AVSS REFBF AVSS Figure 2. Equivalent Circuits CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although the AD876 features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. REV. B –5– WARNING! ESD SENSITIVE DEVICE AD876–Typical Performance Characteristics 1 0 –10 –20 0.5 –40 dB DNL – LSBs –30 0 –50 THD –60 2ND –0.5 –70 3RD –80 –1 0 –90 64 128 192 256 320 384 448 512 576 640 704 768 832 896 960 10 1 CODE OFFSET FREQUENCY – MHz Figure 6. THD vs. Input Frequency 2nd, 3rd Harmonics 2 60 0 55 –2 50 –4 dB GAIN – dB Figure 3. AD876 Typical DNL 45 –6 40 –8 35 –10 1 10 100 30 1000 5 10 FREQUENCY – MHz Figure 4. Full Power Bandwidth 15 20 CLOCK FREQUENCY – MHz 25 30 Figure 7. SINAD vs. CLK Frequency (AIN = –0.5 dB) 180 60 170 55 160 150 mW dB 50 45 140 130 40 120 35 30 100 110 100 101 INPUT FREQUENCY – MHz 102 0 5 10 15 CLOCK FREQUENCY – MHz 20 25 Figure 8. Power Consumption vs. Sample Rate Figure 5. SINAD vs. Input Frequency (fCLK = 20 MSPS, AIN = –0.5 dB) –6– REV. B AD876 PIPELINE DELAY (LATENCY) 1 2ND 3RD 4TH 5TH The number of clock cycles between conversion initiation and the associated output data being made available. New output data is provided every clock cycle. HARMONICS (dBc) –68.02 6TH –77.74 –72.85 7TH –75.62 –70.68 8TH –75.98 –78.09 9TH –81.20 REFERENCE TOP/BOTTOM OFFSET THD = –64.12 SNR = 48.73 SINAD = 48.61 SFDR = –68.02 2 3 6 9 8 Resistance between the reference input and comparator input tap points causes offset errors. These errors can be nulled out by using the force-sense connection as shown in the Reference Input section. 4 7 5 THEORY OF OPERATION Figure 9. AD876JR-8 Typical FFT (fIN = 3.58 MHz, AIN = –0.5 dB, fCLOCK = 20 MSPS) 1 2ND 3RD 4TH 5TH HARMONICS (dBc) –68.91 6TH –80.55 –73.92 7TH –82.02 –68.67 8TH –81.02 –73.26 9TH –88.94 THD = –64.24 SNR = 55.71 SINAD = 55.14 SFDR = –68.67 APPLYING THE AD876 DRIVING THE ANALOG INPUT 5 3 6 2 8 9 4 7 Figure 10. AD876 Typical FFT (fIN = 3.58 MHz, AIN = –0.5 dB, fCLOCK = 20 MSPS) DEFINITIONS OF SPECIFICATIONS INTEGRAL NONLINEARITY (INL) Integral nonlinearity refers to the deviation of each individual code from a line drawn from “zero” through “full scale”. The point used as “zero” occurs 1/2 LSB before the first code transition. “Full scale” is defined as a level 1 1/2 LSB beyond the last code transition. The deviation is measured from the center of each particular code to the true straight line. DIFFERENTIAL NONLINEARITY (DNL, NO MISSING CODES) An ideal ADC exhibits code transitions that are exactly 1 LSB apart. DNL is the deviation from this ideal value. It is often specified in terms of the resolution for which no missing codes (NMC) are guaranteed. OFFSET ERROR The first transition should occur at a level 1/2 LSB above “zero.” Offset is defined as the deviation of the actual first code transition from that point. GAIN ERROR The first code transition should occur for an analog value 1/2 LSB above nominal negative full scale. The last transition should occur for an analog value 1 1/2 LSB below the nominal positive full scale. Gain error is the deviation of the actual difference between first and last code transitions and the ideal difference between the first and last code transitions. REV. B The AD876 implements a pipelined multistage architecture to achieve high sample rate with low power. The AD876 distributes the conversion over several smaller A/D subblocks, refining the conversion with progressively higher accuracy as it passes the results from stage to stage. As a consequence of the distributed conversion, the AD876 requires a small fraction of the 1023 comparators used in a traditional flash type A/D. A sample-andhold function within each of the stages permits the first stage to operate on a new input sample while the second and third stages operate on the two preceding samples. Figure 11 shows the equivalent analog input of the AD876, a sample-and-hold amplifier (SHA). Bringing CLK to a logic low level closes Switches 1 and 2 and opens Switch 3. The input source connected to AIN must charge capacitor CH during this time. When CLK transitions from logic “low” to logic “high,” Switch 1 opens first, placing the SHA in hold mode. Switch 2 opens subsequently. Switch 3 then closes, connects the feedback loop around the op amp, and forces the output of the op amp to equal the voltage stored on CH. When CLK transitions from logic “high” to logic “low”, Switch 3 opens first. Switch 2 closes and reconnects the input to CH. Finally, Switch 1 closes and places the SHA in track mode. The structure of the input SHA places certain requirements on the input drive source. The combination of the pin capacitance, CP, and the hold capacitance, CH, is typically less than 5 pF. The input source must be able to charge or discharge this capacitance to 10-bit accuracy in one half of a clock cycle. When the SHA goes into track mode, the input source must charge or discharge capacitor CH from the voltage already stored on CH (the previously captured sample) to the new voltage. In the worst case, a full-scale voltage step on the input, the input source must provide the charging current through the RON (50 Ω) of Switch 2 and quickly settle (within 1/2 CLK period). This situation corresponds to driving a low input impedance. On the other hand, when the source voltage equals the value previously stored on CH , the hold capacitor requires no input current and the equivalent input impedance is extremely high. Adding series resistance between the output of the source and the AIN pin reduces the drive requirements placed on the source. Figure 12 shows this configuration. The bandwidth of the particular application limits the size of this resistor. To maintain the performance outlined in the data sheet specifications, the resistor should be limited to 200 Ω or less. For applications with signal bandwidths less than 10 MHz, the user may increase the size of the series resistor proportionally. Alternatively, adding a shunt capacitance between the AIN pin and –7– AD876 analog ground can lower the ac source impedance. The value of this capacitance will depend on the source resistance and the required signal bandwidth. The input span of the AD876 is a function of the reference voltages. For more information regarding the input range, see the DRIVING THE REFERENCE TERMINALS section of the data sheet. 3 AD876 1 AIN 2 CH CP Figure 11. AD876 Equivalent Input Structure < < 200V AIN 20 kHz. At a sample clock frequency of 20 MHz, the dc bias current at 3 V dc is approximately 30 µA. If we choose R2 equal to 1 kΩ and R1 equal to 50 Ω, the parallel capacitance should be a minimum of 0.008 µF to avoid attenuating signals close to 20 kHz. Note that the bias current will cause a 31.5 mV offset from the 3 V bias. In systems that must use dc-coupling, use an op amp to levelshift a ground-referenced signal to comply with the input requirements of the AD876. Figure 14 shows an AD817 configured in inverting mode with ac signal gain of –1. The dc voltage at the noninverting input of the op amp controls the amount of dc level shifting. A resistive voltage divider attenuates the REFBF signal. The op amp then multiplies the attenuated signal by 2. In the case where REFBF = 1.6 V, the dc output level will be 2.6 V. The AD817 is a low cost, fast settling, single supply op amp with a G = –1 bandwidth of 29 MHz. The AD818 is similar to the AD817 but has a 50 MHz bandwidth. Other appropriate op amps include the AD8011, AD812 (a dual), and the AD8001. VS Rf = 4.99kV +VCC 0.1mF Figure 12. Simple AD876 Drive Requirements In many cases, particularly in single-supply operation, accoupling offers a convenient way of biasing the analog input signal at the proper signal range. Figure 13 shows a typical configuration for ac-coupling the analog input signal to the AD876. Maintaining the specifications outlined in the data sheet requires careful selection of the component values. The most important concern is the f -3 dB high-pass corner that is a function of R2, and the parallel combination of C1 and C2. The f -3 dB point can be approximated by the equation f −3 dB = 1 [2 × π × ( R2) Ceq ] where Ceq is the parallel combination of C1 and C2. Note that C1 is typically a large electrolytic or tantalum capacitor that becomes inductive at high frequencies. Adding a small ceramic or polystyrene capacitor on the order of 0.01 µF that does not become inductive until negligibly higher frequencies maintains a low impedance over a wide frequency range. AD876 NC 0Vdc 2V p-p RIN = 4.99kV AD817 OR AD818 3kV AIN REFBF 14.7kV NC Figure 14. Bipolar Level Shift An integrated difference amplifier such as the AD830 is an alternate means of providing dc level shifting. The AD830 provides a great deal of flexibility with control over offset and gain. Figure 15 shows the AD830 precisely level-shifting a unipolar, ground-referenced signal. The reference voltage, REFBS, determines the amount of level-shifting. The ac gain is 1. The AD830 offers the advantages of high CMRR, precise gain, offset, and high-impedance inputs when compared with a discrete implementation. For more information regarding the AD830, see the AD830 data sheet. +12V R1 C1 VIN AD876 0.1 2V AIN R2 C2 3V VB +2V 0 VB IB VBIAS VB Figure 13. AC-Coupled Inputs There are additional considerations when choosing the resistor values. The ac-coupling capacitors integrate the switching transients present at the input of the AD876 and cause a net dc bias current, IB, to flow into the input. The magnitude of this bias current increases with increasing dc signal level and also increases with sample frequency. This bias current will result in an offset error of (R1 + R2) × IB. If it is necessary to compensate this error, consider making R2 negligibly small or modifying VBIAS to account for the resultant offset. As an example, assume that the input to the AD876 must have a dc bias of 3 V and the minimum expected signal frequency is AD876 AIN AD830 0.1 –12V REFBS Figure 15. Level Shifting with the AD830 REFERENCE INPUT DRIVING THE REFERENCE TERMINALS The AD876 requires an external reference on pins REFTF and REFBF. The AD876 provides reference sense pins, REFTS and REFBS, to minimize voltage drops caused by external and internal wiring resistance. A resistor ladder, nominally 250 Ω, connects pins REFTF and REFBF. –8– REV. B AD876 Figure 16 shows the equivalent input structure for the AD876 reference pins. There is approximately 5 Ω of resistance between both the REFTF and REFBT pins and the reference ladder. If the force-sense connections are not used, the voltage drop across the 5 Ω resistors will result in a reduced voltage appearing across the ladder resistance. This reduces the input span of the converter. Applying a slightly larger span between the REFTF and REFBF pins compensates this error. Note that the temperature coefficients of the 5 Ω resistors are 1350 ppm. The user should consider the effects of temperature when not using a force-sense reference configuration. AD876 5V REFTF REFTS V1 CLK RLADDER 250V DACS REFBS V2 C (VIN) CLK 5V REFBF Figure 16. AD876 Equivalent Reference Structure Do not connect the REFTS and REFBS pins in configurations that do not use a force-sense reference. Connecting the force and sense lines together allows current to flow in the sense lines. Any current allowed to flow through these lines must be negligibly small. Current flow causes voltage drops across the resistance in the sense lines. Because the internal D/As of the AD876 tap different points along the sense lines, each D/A would receive a slightly different reference voltage if current were flowing in these wires. To avoid this undesirable condition, leave the sense lines unconnected. Any current allowed to flow through these lines must be negligibly small (4 4 3 2