AD9300KP

a FEATURES 34 MHz Full Power Bandwidth 0.1 dB Gain Flatness to 8 MHz 72 dB Crosstalk Rejection @ 10 MHz 0.03 /0.01% Differential Phase/Gain Cascadable for Switch Matrices MIL-STD-883 Compliant Versions Available APPLICATIONS Video Routing Medical Imaging Electro Optics ECM Systems Radar Systems Data Acquisition 4 × 1 Wideband Video Multiplexer AD9300 FUNCTIONAL BLOCK DIAGRAM (Based on Cerdip) GENERAL DESCRIPTION The AD9300 is a monolithic high speed video signal multiplexer usable in a wide variety of applications. Its four channels of video input signals can be randomly switched at megahertz rates to the single output. In addition, multiple devices can be configured in either parallel or cascade arrangements to form switch matrices. This flexibility in using the AD9300 is possible because the output of the device is in a high-impedance state when the chip is not enabled; when the chip is enabled, the unit acts as a buffer with a high input impedance and low output impedance. An advanced bipolar process provides fast, wideband switching capabilities while maintaining crosstalk rejection of 72 dB at 10 MHz. Full power bandwidth is a minimum 27 MHz. The device can be operated from ± 10 V to ± 15 V power supplies. The AD9300K is available in a 16-pin ceramic DIP and a 20-pin PLCC and is designed to operate over the commercial temperature range of 0°C to +70°C. The AD9300TQ is a hermetic 16-pin ceramic DIP for military temperature range (–55°C to +125°C) applications. This part is also available processed to MIL-STD-883. The AD9300 is available in a 20-pin LCC as the model AD9300TE, which operates over a temperature range of –55°C to +125°C. The AD9300 Video Multiplexer is available in versions compliant with MIL-STD-883. Refer to the Analog Devices Military Products Databook or current AD9300/883B data sheet for detailed specifications. PIN DESIGNATIONS DIP LCC and PLCC R EV. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 617/329-4700 World Wide Web Site: http://www.analog.com Fax: 617/326-8703 © Analog Devices, Inc., 1996 AD9300–SPECIFICATIONS ELECTRICAL CHARACTERISTICS Parameter (Conditions) INPUT CHARACTERISTICS Input Offset Voltage Input Offset Voltage Input Offset Voltage Drift2 Input Bias Current Input Bias Current Input Resistance Input Capacitance Input Noise Voltage (dc to 8 MHz) TRANSFER CHARACTERISTICS Voltage Gain3 Voltage Gain3 DC Linearity4 Gain Tolerance (VIN = ± 1 V) dc to 5 MHz 5 MHz to 8 MHz Small-Signal Bandwidth (VIN = 100 mV p-p) Full Power Bandwidth 5 (VIN = 2 V p-p) Output Swing Output Current (Sinking @ = +25 °C) Output Resistance DYNAMIC CHARACTERISTICS Slew Rate6 Settling Time (to 0.1% on ± 2 V Output) Overshoot To T-Step7 To Pulse8 Differential Phase9 Differential Gain9 Crosstalk Rejection Three Channels10 One Channel11 SWITCHING CHARACTERISTICS 12 AX Input to Channel HIGH Time13 (tHIGH) AX Input to Channel LOW Time 14 (tLOW) Enable to Channel ON Time 15 (tON) Enable to Channel OFF Time 16 (tOFF) Switching Transient17 DIGITAL INPUTS Logic “1” Voltage Logic “0” Voltage Logic “1” Current Logic “0” Current POWER SUPPLY Positive Supply Current (+12 V) Positive Supply Current (+12 V) Negative Supply Current (–12 V) Negative Supply Current (–12 V) Power Supply Rejection Ratio (± VS = ± 12 V ± 5%) Power Dissipation (± 12 V)l8 ( VS = 12 V 5%; CL = 10 pF; RL = 2 k , unless otherwise noted) COMMERCIAL 0 C to +70 C AD9300KQ/KP Typ 3 75 15 3.0 2 16 0.990 0.985 0.994 0.01 0.05 0.1 350 27 ±2 5 9 170 215 70