ADA4805-2ACPZ-EBZ

10-Lead LFCSP Evaluation Board User Guide UG-776 One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com Universal Evaluation Board for Dual High Speed Op Amps Offered in 10-Lead, 3 mm × 3 mm LFCSP FEATURES EVALUATION BOARD LAYOUT PATTERN Enables quick breadboarding/prototyping User defined circuit configuration Edge mounted subminiature version A (SMA) connector provisions Easy connection to test equipment and other circuits GENERAL DESCRIPTION The evaluation board is a 2-layer printed circuit board (PCB) that accepts SMA edge mounted connectors on the inputs and outputs for efficient connection to test equipment or other circuitry. The evaluation board components are primarily surface-mount technology (SMT) 0603 case size, with the exception of the electrolytic bypass capacitors (C1 and C3), which are 3528 case size. 12776-001 The Analog Devices, Inc., dual lead frame chip scale packages (LFCSP) universal evaluation board is designed to help users evaluate dual high speed op amps offered in 10-lead, 3 mm × 3 mm LFCSP. The dual LFCSP board is a bare board (that is, there are no components soldered to the board) that enables users to quickly prototype a variety of dual op amp circuits, which minimizes risk and reduces time to market. Figure 1 and Figure 2 show the bare evaluation board, component side and solder side, respectively. Figure 1. Evaluation Board, Component Side 12776-002 Figure 3 shows the evaluation board schematic. The bill of materials is listed in Table 1. Figure 2. Evaluation Board, Solder Side PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. 0 | Page 1 of 4 UG-776 10-Lead LFCSP Evaluation Board User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Evaluation Board Schematic ............................................................3 General Description ......................................................................... 1 Ordering Information .......................................................................4 Evaluation Board Layout Pattern.................................................... 1 Bill of Materials ..............................................................................4 Revision History ............................................................................... 2 REVISION HISTORY 12/14—Revision 0: Initial Version Rev. 0 | Page 2 of 4 10-Lead LFCSP Evaluation Board User Guide UG-776 EVALUATION BOARD SCHEMATIC INN1 RINN1 RF1 +VS1 –VS RG1 2 INP1 +VS 4 1 RINP1 +VS OUT1 RS1 + 3 RT1 10 C1 C2 C3 C4 RL1 5 C5 +VS + DIS1A DIS1 –VS –VS RD1 –VS1 INN2 RINN2 RF2 –VS RG2 8 9 RINP2 OUT2 RS2 7 RT2 10 DIS2 RL2 6 +VS DIS2A GND1 GND2 GND3 GND4 RD2 EXPOSED PAD Figure 3. Dual 10-Lead LFCSP Evaluation Board Schematic Rev. 0 | Page 3 of 4 12776-003 INP2 4 UG-776 10-Lead LFCSP Evaluation Board User Guide ORDERING INFORMATION BILL OF MATERIALS Table 1. Quantity 10 2 3 1 Reference Designator +VS, −VS, DIS1, DIS2, INN1, INN2, INP1, INP2, OUT1, OUT2 C1, C3 C2, C4, C5 DUT 8 16 +VS1, −VS1, DIS1A, DIS2A, GND1, GND2, GND3, GND4 RD1, RD2, RF1, RF2, RG1, RG2, RL1, RL2, RS1, RS2, RT1, RT2, RINN1, RINN2, RINP1, RINP2 Description SMA end launch connector 10 µF tantalum capacitor Capacitor, user defined See data sheet packaging information Test point/vector pin Resistor, user defined Package SMA C3528 C0603 10-lead, 3 mm × 3 mm LFCSP R0603 ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. ©2014 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG12776-0-12/14(0) Rev. 0 | Page 4 of 4