ADCMP355AKS

Preliminary Technical Data FEATURES Comparators with 0.6V or 1.2V On-Chip References Output Stages Open-Drain Active-Low (ADCMP350/1) Push-Pull Active-Low (ADCMP352/3) Open-Drain Active-High (ADCMP354/5) Push-Pull Active-High (ADCMP356/7) High Voltage (up to 22V) tolerance on VIN and Open-Drain Output Pins Low Power Consumption (10µA) 10nA Input Bias Current 20mV Hysteresis Specified Over -40°C to +125°C Temperature Range 4-Lead SC70 Package Comparator and Reference Circuits ADCMP350–ADCMP357 FUNCTIONAL BLOCK DIAGRAMS VCC ADCMP350/1/4/5 VIN REF OUT/OUT GND VCC APPLICATIONS Microprocessor Systems Computers Controllers Intelligent Instruments Portable Equipment VIN ADCMP352/3/6/7 VCC OUT/OUT REF GND GENERAL DESCRIPTION The ADCMP350-ADCMP357 are comparator and reference circuits suitable for use in general purpose applications. High performance over the -40°C to +125°C temperature range make them suitable for use in automotive and other thermally harsh applications, while low power consumption and space efficient SC70 packaging make them ideal for battery powered portable equipment Table 1. Selection Table Part No. ADCMP350 ADCMP351 ADCMP352 ADCMP353 ADCMP354 ADCMP355 ADCMP356 ADCMP357 Reference Voltage (V) 0.6 1.2 0.6 1.2 0.6 1.2 0.6 1.2 Output Stage OUT Open-Drain Open-Drain Push-Pull Push-Pull OUT Open-Drain Open-Drain Push-Pull Push-Pull Rev. PrB Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. www.analog.com Tel: 781.329.4700 Fax: 781.326.8703 © 2004 Analog Devices, Inc. All rights reserved. ADCMP350–ADCMP357 SPECIFICATIONS (VCC=Full Operating Range, TA=-40°C to +125°C, unless otherwise noted.) Parameter SUPPLY VCC Operating Voltage Range VIN Operating Voltage Range Supply Current INTERNAL REFERENCE ADCMP350/2/4/6 ADCMP351/3/5/7 VIN HYSTERESIS INPUT BIAS CURRENT THRESHOLD TEMPERATURE COEFFICIENT VIN TO OUT DELAY OUT/OUT VOLTAGE LOW OUT/OUT VOLTAGE HIGH OUT/OUT OPEN-DRAIN OUTPUT LEAKAGE CURRENT 0.8xVcc 1 Min 2.25 10 0.585 0.579 1.17 1.158 0.6 0.6 1.2 1.2 20 10 30 5 Typ Max 3.6 22 15 0.615 0.621 1.23 1.242 Preliminary Technical Data Units V V µA V V V V mV nA ppm/ºC µs V V µA Test Conditions/Comments VCC=3.3V, TA=-40°C to +85°C VCC=3.3V, TA=-40°C to +125°C VCC=3.3V, TA=-40°C to +85°C VCC=3.3V, TA=-40°C to +125°C VCC=3.3V VIN= VTH to (VTH-100mV) VINVTH max, ISOURCE=500µA VCC>VTH, OUT/OUT=22V 0.3 ABSOLUTE MAXIMUM RATINGS Table 3. TA = 25°C unless otherwise noted. Parameter VCC VIN OUT, OUT (Open-Drain) OUT, OUT (Push-Pull) Operating Temperature Range Storage Temperature Range θJA Thermal Impedance, SC70 Lead Temperature Soldering (10 sec) Vapour Phase (60 sec) Infrared (15 sec) Rating -0.3V to +6V -0.3V to +25V -0.3V to +25V -0.3V to (VCC+0.3V) -40°C to +125°C -65°C to +150°C 146°C/W 300°C 215°C 220°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Rev. PrB | Page 2 of 4 Preliminary Technical Data PIN CONFIGURATION AND FUNCTIONAL DESCRIPTIONS VIN 1 ADM109x ADCMP35x ADCMP350–ADCMP357 4 VCC GND 2 3 OUT Table 4. Pin Functional Descriptions Pin No. 1 2 3 4 Name VIN GND OUT/OUT VCC Description Monitors analog input voltage Ground Digital output. Active-high or active-low and open-drain or push-pull options depending on model number Power supply ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. ` Rev. PrB | Page 3 of 4 ADCMP350–ADCMP357 OUTLINE DIMENSIONS 1.35 1.15 4 Preliminary Technical Data 2.20 1.80 3 2.40 1.80 1 2 PIN 1 0.65 BSC 1.00 0.80 0.50 BSC 1.10 0.80 0.18 0.10 0.30 0.10 0.10 MAX 0.30 0.15 SEATING 0.70 PLANE 0.50 0.10 COPLANARITY P ACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC82 EXCEPT FOR WIDTH OF PIN-2 AS SHOWN Figure 1. 4-Lead Thin Shrink Small Outline Transistor Package [SC70] (EIAJ SC82 body) (KS-4) Dimensions shown in millimeters ORDERING GUIDE Model ADCMP350AKS ADCMP351AKS ADCMP352AKS ADCMP353AKS ADCMP354AKS ADCMP355AKS ADCMP356AKS ADCMP357AKS Temperature Range -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C Package Type SC70-4 SC70-4 SC70-4 SC70-4 SC70-4 SC70-4 SC70-4 SC70-4 Branding M0Z M10 M11 M12 M13 M14 M15 M16 © 2004 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective companies. Printed in the U.S.A. PR04746-0-4/04(PrB) Rev. PrB | Page 4 of 4