ADG3231BRJ-REEL

Low Voltage, Single-Channel Level Translator ADG3231* FEATURES Operates from 1.65 V to 3.6 V Supply Rails Unidirectional Signal Path, Bidirectional Level Translation Tiny 6-Lead SOT-23 Package Short Circuit Protection LVTTL/CMOS Compatible Inputs APPLICATIONS Level Translation Low Voltage ASIC Translation Serial Interface Translation FUNCTIONAL BLOCK DIAGRAM VCC1 VCC2 A1 Y1 GND GENERAL DESCRIPTION PRODUCT HIGHLIGHTS The ADG3231 is a level translator designed on a submicron process that operates from supplies as low as 1.65 V. The device is guaranteed for operation over the supply range 1.65 V to 3.6 V. It operates from two supply voltages, allowing bidirectional level translation, i.e., it translates low voltages to higher voltages and vice versa. The signal path is unidirectional, meaning data may flow only from A1 to Y1. This type of device may be used in applications requiring communication between devices operating from different supply levels. The level translator is packaged in one of the smallest footprints available for its pin count. The 6-lead SOT-23 package requires only a maximum of 5.28 mm 5.28 mm board space. 1. Bidirectional level translation matches any voltage level from 1.65 V to 3.6 V. 2. The device offers high performance and is fully guaranteed across the supply range. 3. Short circuit protection. 4. Tiny SOT-23 package. *Patent Pending REV. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective companies. One Technology Way, P Box 9106, Norwood, MA 02062-9106, U.S.A. .O. Tel: 781/329-4700 www.analog.com Fax: 781/326-8703 © 2003 Analog Devices, Inc. All rights reserved. ADG3231–SPECIFICATIONS1 Parameter Symbol (VCC1 = VCC2 = 1.65 V to 3.6 V, GND = 0 V. All specifications TMIN to TMAX, unless otherwise noted.) Min Typ2 Max Unit Conditions LOGIC INPUTS/OUTPUTS3 Input High Voltage4 Input Low Voltage4 Output High Voltage VIH VIH VIH VIL VIL VIL VOH Output Low Voltage VOL VCC1 = 3.0 V to 3.6 V VCC1 = 2.3 V to 2.7 V VCC1 = 1.65 V to 1.95 V VCC1 = 3.0 V to 3.6 V VCC1 = 2.3 V to 2.7 V VCC1 = 1.65 V to 1.95 V IOH = –100 µA, VCC2 = 3.0 V to 3.6 V VCC2 = 2.3 V to 2.7 V VCC2 = 1.65 V to 1.95 V IOH = –4 mA, VCC2 = 2.3 V to 2.7 V VCC2 = 1.65 V to 1.95 V IOH = –8 mA, VCC2 = 3.0 V to 3.6 V IOH = +100 µA, VCC2 = 3.0 V to 3.6 V VCC2 = 2.3 V to 2.7 V VCC2 = 1.65 V to 1.95 V IOH = +4 mA, VCC2 = 2.3 V to 2.7 V VCC2 = 1.65 V to 1.95 V IOH = +8 mA, VCC2 = 3.0 V to 3.6 V 3.3 V ± 0.3 V, CL = 30 pF, VT = VCC/2 2.5 V ± 0.2 V, CL = 30 pF, VT = VCC/2 1.8 V ± 0.15 V, CL = 30 pF, VT = VCC/2 0 VIN 3.6 V 0 VIN 3.6 V 1.35 1.35 0.65 VCC 0.8 0.7 0.35 VCC 2.4 2.0 VCC – 0.45 2.0 VCC – 0.45 2.4 0.4 0.4 0.45 0.4 0.45 0.4 4 4.5 6.5 6.5 6.5 10.25 ±1 ±1 3.6 3.6 2 2 V V V V V V V V V V V V V V V V V V ns ns ns µA µA V V µA µA SWITCHING CHARACTERISTICS4, 5 Propagation Delay, tPD A1 to Y1 tPHL, tPLH tPHL, tPLH Propagation Delay, tPD A1 to Y1 tPHL, tPLH Propagation Delay, tPD A1 to Y1 Input Leakage Current II Output Leakage Current IO POWER REQUIREMENTS Power Supply Voltages Quiescent Power Supply Current VCC1 VCC2 ICC1 ICC2 1.65 1.65 Digital Inputs = 0 V or VCC Digital Inputs = 0 V or VCC NOTES 1 Temperature range is as follows: B Version: –40°C to +85°C. 2 All typical values are at VCC1 = VCC2, TA = 25°C, unless otherwise stated. 3 VIL and VIH levels are specified with respect to VCC1; VOH and VOL levels are with respect to VCC2. 4 Guaranteed by design, not subject to production test. 5 See Test Circuit and Waveforms. Specifications subject to change without notice. –2– REV. 0 ADG3231 ABSOLUTE MAXIMUM RATINGS* (TA = 25°C, unless otherwise noted.) PIN CONFIGURATION VCC1 1 6 VCC2 VCC to GND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +4.6 V A1 Input Voltage . . . . . . . . . . . . . . . . . . . –0.3 V to VCC1 +0.3 V DC Output Current . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mA Operating Temperature Range Industrial (B Version) . . . . . . . . . . . . . . . . . . –40°C to +85°C Storage Temperature Range . . . . . . . . . . . . . –65°C to +150°C Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . .150°C 6-Lead SOT-23, qJA Thermal Impedance . . . . . . . . . . . . . . . . . . . . . 229°C/W Lead Temperature, Soldering (10 seconds) . . . . . . . . . . . 300°C IR Reflow, Peak Temperature (