CMOS 1.8 V to 5.5 V, 2.5 Ω
2:1 Mux/SPDT Switch in SOT-23
ADG719
FEATURES
FUNCTIONAL BLOCK DIAGRAM
1.8 V to 5.5 V single supply
4 Ω (max) on resistance
0.75 Ω (typ) on resistance flatness
−3 dB bandwidth > 200 MHz
Rail-to-rail operation
6-Lead SOT-23 package and 8-Lead MSOP package
Fast switching times:
tON = 12 ns
tOFF = 6 ns
Typical power consumption: (< 0.01 μW)
TTL/CMOS compatible
ADG719
S2
D
S1
NOTES
1. SWITCHES SHOWN FOR A LOGIC 1 INPUT.
08708-001
IN
Figure 1.
APPLICATIONS
Battery-powered systems
Communication systems
Sample-and-hold systems
Audio signal routing
Video switching
Mechanical reed relay replacement
GENERAL DESCRIPTION
PRODUCT HIGHLIGHTS
The ADG719 is a monolithic CMOS SPDT switch. This switch
is designed on a submicron process that provides low power
dissipation yet gives high switching speed, low on resistance,
and low leakage currents.
1.
1.8 V to 5.5 V Single-Supply Operation. The ADG719
offers high performance, including low on resistance and
fast switching times, and is fully specified and guaranteed
with 3 V and 5 V supply rails.
The ADG719 can operate from a single-supply range of 1.8 V
to 5.5 V, making it ideal for use in battery-powered instruments
and with the new generation of DACs and ADCs from Analog
Devices, Inc.
2.
Very Low RON (4 Ω Max at 5 V and 10 Ω Max at 3 V). At 1.8 V
operation, RON is typically 40 Ω over the temperature range.
3.
Automotive Temperature Range: −40°C to +125°C.
4.
On Resistance Flatness (RFLAT(ON)) (0.75 Ω typ).
5.
−3 dB Bandwidth > 200 MHz.
6.
Low Power Dissipation. CMOS construction ensures low
power dissipation.
7.
Fast tON/tOFF.
8.
Tiny, 6-lead SOT-23 and 8-lead MSOP packages.
Each switch of the ADG719 conducts equally well in both
directions when on. The ADG719 exhibits break-before-make
switching action.
Because of the advanced submicron process, −3 dB bandwidths
of greater than 200 MHz can be achieved.
The ADG719 is available in a 6-lead SOT-23 package and an
8-lead MSOP package.
Rev. D
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2002–2010 Analog Devices, Inc. All rights reserved.
ADG719
TABLE OF CONTENTS
Features .............................................................................................. 1
Typical Performance Characteristics ..............................................7
Applications ....................................................................................... 1
Test Circuits ........................................................................................9
Functional Block Diagram .............................................................. 1
Terminology .................................................................................... 11
General Description ......................................................................... 1
Applications Information .............................................................. 12
Product Highlights ........................................................................... 1
ADG719 Supply Voltages .......................................................... 12
Revision History ............................................................................... 2
On Response vs. Frequency ...................................................... 12
Specifications..................................................................................... 3
Off Isolation ................................................................................ 12
Absolute Maximum Ratings............................................................ 5
Outline Dimensions ....................................................................... 13
ESD Caution .................................................................................. 5
Ordering Guide .......................................................................... 14
Pin Configuration and Function Descriptions ............................. 6
REVISION HISTORY
3/10—Rev. C to Rev. D
Removed B Version Text............................................... Throughout
Changes to Figure 1 .......................................................................... 1
Deleted Endnote 1 (Table 1)............................................................ 3
Deleted Endnote 1 (Table 2)............................................................ 4
Changes to Figure 2 .......................................................................... 6
Changes to Ordering Guide .......................................................... 14
12/09—Rev. B to Rev. C
Updated Format .................................................................. Universal
Changes to Table 3 ............................................................................ 5
Added Table 4.................................................................................... 6
Changes to Terminology Section.................................................. 11
Updated Outline Dimensions ....................................................... 13
Changes to Ordering Guide .......................................................... 14
7/02—Rev. A to Rev. B.
Changes to Product Name ............................................................... 1
Changes to Features.......................................................................... 1
Additions to Product Highlights .................................................... 1
Changes to Specifications ................................................................ 2
Edits to Absolute Maximum Ratings ............................................. 4
Changes to Terminology.................................................................. 4
Edits to Ordering Guide .................................................................. 4
Added New TPCs 4 and 5 ............................................................... 5
Replaced TPC 10............................................................................... 6
Test Circuits 6, 7, and 8 Replaced ................................................... 7
Updated RM-8 and RT-6 Package Outlines ................................. 9
Rev. D | Page 2 of 16
ADG719
SPECIFICATIONS
VDD = 5 V ± 10%, GND = 0 V.
Table 1.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
+25°C
2.5
4
On Resistance Match Between
Channels (ΔRON)
On Resistance Flatness (RFLAT(ON))
LEAKAGE CURRENTS IS (Off )
Source Off Leakage
Channel On Leakage ID, IS (On)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
DYNAMIC CHARACTERISTICS 1
tON
−40°C to +85°C
−40°C to +125°C
Unit
0 V to VDD
V
5
7
Ω typ
Ω max
0.1
0.4
0.4
1.2
1.5
0.75
±0.01
±0.25
±0.01
±0.25
VS = 0 V to VDD, IS = −10 mA
VDD = 5.5 V
VS = 4.5 V/1 V, VD = 1 V/4.5 V;
See Figure 15
VS = VD = 1 V or VS = VD = 4.5 V;
See Figure 16
1
±0.35
5
2.4
0.8
V min
V max
μA typ
μA max
VIN = VINL or VINH
±0.1
RL = 300 Ω, CL = 35 pF
VS = 3 V; See Figure 17
RL = 300 Ω, CL = 35 pF
VS = 3 V; See Figure 17
RL = 300 Ω, CL = 35 pF,
VS1 = VS2 = 3 V; See Figure 18
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
See Figure 19
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
See Figure 20
RL = 50 Ω, CL = 5 pF; See Figure 21
0.005
tOFF
3
Break-Before-Make Time Delay, tD
8
7
Off Isolation
−67
−87
Channel-to-Channel Crosstalk
−62
−82
dB typ
dB typ
200
7
27
MHz typ
pF typ
pF typ
6
1
IDD
VS = 0 V to VDD, IS = −10 mA
±0.35
ns typ
ns max
ns typ
ns max
ns typ
ns min
dB typ
dB typ
Bandwidth −3 dB
CS (Off )
CD, CS (On)
POWER REQUIREMENTS
VS = 0 V to VDD, IS = −10 mA;
See Figure 14
nA typ
nA max
nA typ
nA max
12
VDD = 5.5 V
Digital inputs = 0 V or 5.5 V
0.001
1.0
1
Ω typ
Ω max
Ω typ
Ω max
Test Conditions/Comments
Guaranteed by design, not subject to production test.
Rev. D | Page 3 of 16
μA typ
μA max
ADG719
VDD = 3 V ± 10%, GND = 0 V.
Table 2.
Parameter
ANALOG SWITCH
Analog Signal Range
On Resistance (RON)
+25°C
−40°C to +85°C
6
7
10
On Resistance Match Between
Channels (ΔRON)
On Resistance Flatness (RFLAT(ON))
LEAKAGE CURRENTS
Source Off Leakage IS (Off )
Channel On Leakage ID, IS (On)
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Current
IINL or IINH
DYNAMIC CHARACTERISTICS 1
tON
±0.01
±0.25
±0.01
±0.25
−40°C to +125°C
0 V to VDD
Unit
V
Test Conditions/Comments
12
Ω typ
Ω max
VS = 0 V to VDD, IS = −10 mA;
See Figure 14
Ω typ
Ω max
Ω typ
VS = 0 V to VDD, IS = −10 mA
0.1
0.4
2.5
0.4
±0.35
1
±0.35
5
nA typ
nA max
nA typ
nA max
2.0
0.8
V min
V max
μA typ
μA max
VIN = VINL or VINH
±0.1
RL = 300 Ω, CL = 35 pF
VS = 2 V; See Figure 17
RL = 300 Ω, CL = 35 pF
VS = 2 V; See Figure 17
RL = 300 Ω, CL = 35 pF
VS1 = VS2 = 2 V; See Figure 18
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
See Figure 19
RL = 50 Ω, CL = 5 pF, f = 10 MHz
RL = 50 Ω, CL = 5 pF, f = 1 MHz;
See Figure 20
RL = 50 Ω, CL = 5 pF; See Figure 21
0.005
10
Break-Before-Make Time Delay, tD
8
Off Isolation
−67
−87
ns typ
ns max
ns typ
ns max
ns typ
ns min
dB typ
dB typ
Channel-to-Channel Crosstalk
−62
−82
dB typ
dB typ
Bandwidth −3 dB
CS (Off )
CD, CS (On)
200
7
27
MHz typ
pF typ
pF typ
15
tOFF
4
8
1
POWER REQUIREMENTS
IDD
1
VS = 0 V to VDD, IS = −10 mA
VDD = 3.3 V
VS = 3 V/1 V, VD = 1 V/3 V;
See Figure 15
VS = VD = 1 V or VS = VD = 3 V;
See Figure 16
VDD = 3.3 V
Digital inputs = 0 V or 3.3 V
0.001
1.0
μA typ
μA max
Guaranteed by design, not subject to production test.
Rev. D | Page 4 of 16
ADG719
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
VDD to GND
Analog, Digital Inputs1
Peak Current, S or D
Continuous Current, S or D
Operating Temperature Range
Storage Temperature Range
Junction Temperature
MSOP Package, Power Dissipation
θJA Thermal Impedance
θJC Thermal Impedance
SOT-23 Package, Power Dissipation
θJA Thermal Impedance
θJC Thermal Impedance
Lead Soldering
Lead Temperature, Soldering
(10 sec)
IR Reflow, Peak Temperature
(