ADL5604-EVALZ

700 MHz to 2700 MHz 1 W RF Driver Amplifier ADL5604 Data Sheet 13 GND 14 GND Operation from 700 MHz to 2700 MHz Gain of 12.2 dB at 2630 MHz OIP3 of 42.2 dBm at 2630 MHz P1dB of 29.1 dBm at 2630 MHz Noise figure of 4.6 dB at 2630 MHz Single 5 V power supply Low quiescent current of 318 mA Internal active biasing Fast power-down/up time of 50 ns Easily externally matched Compact 4 mm × 4 mm LFCSP ESD rating of ±1 kV (Class 1C) 15 GND FUNCTIONAL BLOCK DIAGRAM 16 GND FEATURES ADL5604 RFIN 1 12 RFOUT RFIN 2 11 RFOUT VBIAS 3 10 RFOUT BIAS 7 8 GND GND 9 RFOUT 14 16 08220-001 6 GND 5 4 GND VCC2 Figure 1. GENERAL DESCRIPTION The ADL5604 can be quickly powered down or up in 50 ns for applications requiring TX shutdown, such as TDD systems. The ADL5604 operates on a single 5 V supply voltage and draws only 318 mA of supply current. The driver is fabricated on a GaAs HBT process and operates from −40°C to +85°C. A fully populated evaluation board is available. Rev. C 2140 MHz 1966 MHz 946 MHz –45 –50 –55 –60 –65 –70 –75 –80 0 2 4 6 8 10 12 18 POUT (dBm) 20 08220-002 For thermal management, the ADL5604 uses an exposed paddle, and the upper and lower pins of the package are all grounded, which gives the ADL5604 excellent thermal transfer characteristics. –40 ACPR (dBc) The ADL5604 is a very broadband RF driver amplifier that operates over the wide frequency range of 700 MHz to 2700 MHz. The ADL5604 is also highly linear and has a very low power consumption, enabling the driver to be packaged in a compact 16-lead, 4 mm × 4 mm LFCSP. Figure 2. ACPR vs. Output Power, 3GPP 3.5 TM1-64 Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2010–2017 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADL5604 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Applications Information .............................................................. 15 Functional Block Diagram .............................................................. 1 Basic Layout Connections ......................................................... 15 General Description ......................................................................... 1 ADL5604 Match ......................................................................... 16 Revision History ............................................................................... 2 ACPR and EVM ......................................................................... 19 Specifications..................................................................................... 3 Thermal Considerations............................................................ 19 Typical Scattering Parameters..................................................... 5 Absolute Maximum Ratings ............................................................ 7 Soldering Information and Recommended PCB Land Pattern .......................................................................................... 19 ESD Caution .................................................................................. 7 Evaluation Board ............................................................................ 20 Pin Configuration and Function Descriptions ............................. 8 Outline Dimensions ....................................................................... 23 Typical Performance Characteristics ............................................. 9 Ordering Guide .......................................................................... 23 REVISION HISTORY 8/2017—Rev. B to Rev. C Changed CP-16-4 to CP-16-23 .................................... Throughout Updated Outline Dimensions ....................................................... 23 Changes to Ordering Guide .......................................................... 23 9/2013—Rev. A to Rev. B Added Figure 33; Renumbered Sequentially .............................. 13 Updated Outline Dimensions ....................................................... 23 2/2011—Rev. 0 to Rev. A Changes to Figure 29, Figure 30, Figure 31 ................................. 13 Changed L2 Value at 880 MHz to 2.4 nH, Table 6 ..................... 16 Changes to Figure 41 ...................................................................... 18 Changes to ACPR and EVM Section ........................................... 19 4/2010—Revision 0: Initial Version Rev. C | Page 2 of 23 Data Sheet ADL5604 SPECIFICATIONS VCC1 1 = 5 V and TA = 25°C, unless otherwise noted. Table 1. Parameter OVERALL FUNCTION Frequency Range FREQUENCY = 748 MHz Gain 2 vs. Frequency Output 1 dB Compression Point Output Third-Order Intercept Noise Figure FREQUENCY = 881 MHz Gain2 vs. Frequency Output 1 dB Compression Point Output Third-Order Intercept Noise Figure FREQUENCY = 942 MHz Gain2 vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point ACP Output Third-Order Intercept Noise Figure FREQUENCY = 1960 MHz Gain2 vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point ACP Output Third-Order Intercept Noise Figure FREQUENCY = 2140 MHz Gain2 vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point ACP Output Third-Order Intercept Noise Figure Test Conditions/Comments Min Typ 700 ±20 MHz ∆f = 1 MHz, POUT = 14 dBm per tone ±13 MHz ∆f = 1 MHz, POUT = 14 dBm per tone MHz 15.3 0.38 29.1 42.8 8.5 dB dB dBm dBm dB 20.3 0.35 28.8 42.2 4.5 dB dB dBm dBm dB 21.3 dB dB dB dB dBm dBm dBm dB 13.7 14.4 ±0.2 ±0.7 ±0.02 28.8 −57 42.1 3.6 15.2 dB dB dB dB dBm dBm dBm dB 13.2 14.0 ±0.1 ±0.6 ±0.03 28.6 −60 42.1 3.8 14.9 dB dB dB dB dBm dBm dBm dB ±30 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V POUT =15 dBm, 3GPP 3.5 TM1-64, frequency = 1966 MHz ∆f = 1 MHz, POUT = 14 dBm per tone Rev. C | Page 3 of 23 2700 20.5 ±0.1 ±0.6 ±0.03 28.3 −56 41.2 3.8 POUT =15 dBm, 3GPP 3.5 TM1-64, frequency = 946 MHz ∆f = 1 MHz, POUT = 14 dBm per tone POUT =15 dBm, 3GPP 3.5 TM1-64 ∆f = 1 MHz, POUT = 14 dBm per tone Unit 19.8 ±18 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V ±30 MHz −40°C ≤ TA ≤ +85°C 4.75 V to 5.25 V Max ADL5604 Parameter FREQUENCY = 2630 MHz Gain2 vs. Frequency Output 1 dB Compression Point Output Third-Order Intercept Noise Figure POWER INTERFACE Supply Voltage Supply Current vs. Temperature POWER DOWN INTERFACE Turn-On Time Turn-Off Time 1 2 Data Sheet Test Conditions/Comments Min Typ Max 12.2 4.8 29.1 42.2 4.6 ±60 MHz ∆f = 1 MHz, POUT = 14 dBm per tone Unit dB dB dBm dBm dB Pin RFOUT 4.75 −40°C ≤ TA ≤ +85°C 5 318 ±7 50% of control pulse to 50% of RFOUT 50% of control pulse to 50% of RFOUT 50 50 VCC1 is the supply voltage to the ADL5604 through the RFOUT pins. Guaranteed maximum and minimum specified limits on this parameter are based on 6 sigma calculations. Rev. C | Page 4 of 23 5.25 345 V mA mA ns ns Data Sheet ADL5604 TYPICAL SCATTERING PARAMETERS VCC1 1 = 5 V and TA = 25°C; the effects of the test fixture have been de-embedded up to the pins of the device. Table 2. Frequency (MHz) 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1150 1200 1250 1300 1350 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2050 2100 2150 2200 2250 2300 2350 2400 S11 Magnitude (dB) −0.74 −0.67 −0.63 −0.59 −0.56 −0.54 −0.53 −0.52 −0.50 −0.50 −0.49 −0.49 −0.48 −0.49 −0.49 −0.49 −0.50 −0.50 −0.51 −0.51 −0.52 −0.53 −0.54 −0.55 −0.56 −0.57 −0.58 −0.59 −0.59 −0.60 −0.61 −0.63 −0.64 −0.65 −0.67 −0.68 −0.69 −0.70 −0.72 −0.73 −0.75 −0.77 −0.78 −0.80 −0.82 −0.84 −0.86 −0.88 Angle (°) −177.7 −179.4 179.6 178.7 177.9 177.0 176.2 175.4 174.7 173.9 173.1 172.4 171.6 170.8 170.0 169.3 168.5 167.8 167.0 166.3 165.6 164.8 164.1 163.3 162.6 161.9 161.2 160.5 159.7 158.9 158.2 157.4 156.7 155.9 155.2 154.4 153.6 152.8 152.1 151.3 150.5 149.7 148.9 148.1 147.3 146.5 145.7 144.9 S21 Magnitude (dB) 21.45 19.30 18.18 17.10 16.08 15.12 14.18 13.30 12.51 11.77 11.09 10.46 9.89 9.35 8.85 8.39 7.95 7.55 7.16 6.81 6.47 6.15 5.85 5.57 5.29 5.05 4.80 4.60 4.40 4.21 4.03 3.86 3.70 3.55 3.41 3.29 3.17 3.06 2.96 2.86 2.77 2.70 2.62 2.57 2.52 2.48 2.44 2.40 Angle (°) 134.7 134.8 129.6 123.5 117.8 112.6 108.2 104.5 101.2 98.3 95.6 93.2 90.9 88.7 86.7 84.7 82.8 81.0 79.2 77.5 75.8 74.0 72.4 70.8 69.2 67.7 66.1 64.6 63.0 61.4 59.9 58.2 56.7 55.1 53.6 51.9 50.3 48.6 47.0 45.3 43.7 42.0 40.4 38.7 37.0 35.1 33.4 31.5 Rev. C | Page 5 of 23 S12 Magnitude (dB) −39.97 −39.81 −39.69 −39.55 −39.47 −39.53 −39.29 −39.05 −39.02 −39.24 −39.27 −38.98 −38.95 −38.90 −38.78 −38.65 −38.58 −38.51 −38.44 −38.34 −38.26 −38.20 −38.14 −38.00 −37.97 −37.87 −37.87 −37.69 −37.55 −37.45 −37.33 −37.20 −37.15 −37.09 −36.97 −36.86 −36.75 −36.65 −36.54 −36.42 −36.30 −36.19 −36.08 −35.95 −35.83 −35.70 −35.58 −35.46 Angle (°) 10.6 6.4 4.9 4.0 3.2 2.8 3.4 1.6 −1.6 0.3 0.3 0.5 −0.7 −0.5 −1.0 −1.5 −2.3 −2.8 −3.4 −4.1 −4.5 −5.0 −5.6 −6.2 −7.3 −7.3 −8.1 −8.2 −9.4 −10.1 −10.7 −11.9 −12.8 −13.7 −14.3 −15.2 −16.1 −17.0 −18.1 −19.0 −20.1 −21.2 −22.2 −23.3 −24.5 −25.7 −26.9 −28.4 S22 Magnitude (dB) −2.71 −2.34 −1.93 −1.61 −1.39 −1.26 −1.19 −1.14 −1.11 −1.09 −1.10 −1.12 −1.11 −1.13 −1.15 −1.18 −1.21 −1.23 −1.27 −1.28 −1.32 −1.35 −1.39 −1.43 −1.47 −1.50 −1.55 −1.57 −1.60 −1.64 −1.68 −1.74 −1.78 −1.82 −1.88 −1.92 −1.97 −2.02 −2.10 −2.17 −2.23 −2.31 −2.40 −2.45 −2.51 −2.61 −2.72 −2.81 Angle (°) −153.2 −163.2 −167.2 −170.3 −172.9 −175.3 −177.3 −179.0 179.5 178.0 176.6 175.4 174.2 173.0 172.0 171.0 170.0 169.1 168.2 167.3 166.3 165.4 164.6 163.7 162.8 162.0 161.2 160.4 159.5 158.5 157.7 156.8 156.0 155.1 154.4 153.3 152.3 151.4 150.6 149.5 148.7 147.8 146.8 145.8 144.9 143.9 142.8 141.7 ADL5604 Frequency (MHz) 2450 2500 2550 2600 2650 2700 2750 2800 2850 2900 2950 3000 3050 3100 3150 3200 3250 3300 3350 3400 3450 3500 3550 3600 3650 3700 3750 3800 3850 3900 3950 4000 1 Data Sheet S11 Magnitude (dB) −0.90 −0.92 −0.94 −0.96 −0.99 −1.01 −1.04 −1.07 −1.10 −1.13 −1.16 −1.19 −1.22 −1.25 −1.29 −1.32 −1.36 −1.40 −1.44 −1.47 −1.51 −1.55 −1.59 −1.63 −1.67 −1.71 −1.75 −1.79 −1.82 −1.84 −1.86 −1.88 Angle (°) 144.1 143.2 142.4 141.6 140.8 139.9 139.1 138.3 137.4 136.6 135.7 134.9 134.1 133.2 132.4 131.5 130.7 129.8 129.0 128.1 127.3 126.4 125.6 124.8 124.0 123.2 122.3 121.5 120.7 119.9 119.1 118.3 S21 Magnitude (dB) 2.37 2.35 2.33 2.32 2.32 2.32 2.33 2.34 2.36 2.37 2.39 2.42 2.45 2.48 2.52 2.55 2.59 2.63 2.67 2.72 2.76 2.80 2.84 2.89 2.93 2.97 3.01 3.05 3.09 3.13 3.17 3.22 Angle (°) 29.7 27.8 26.0 24.0 22.1 20.1 18.0 15.9 13.9 11.7 9.5 7.3 5.1 2.8 0.4 −2.0 −4.4 −6.9 −9.4 −12.0 −14.7 −17.3 −20.0 −22.7 −25.5 −28.4 −31.2 −34.1 −37.1 −40.0 −43.0 −46.1 VCC1 is the supply to the ADL5604 through the RFOUT pins. Rev. C | Page 6 of 23 S12 Magnitude (dB) −35.34 −35.21 −35.08 −34.96 −34.83 −34.71 −34.58 −34.45 −34.31 −34.18 −34.05 −33.94 −33.81 −33.69 −33.55 −33.44 −33.32 −33.21 −33.10 −32.98 −32.86 −32.73 −32.61 −32.51 −32.39 −32.28 −32.18 −32.10 −32.02 −31.94 −31.85 −31.79 Angle (°) −29.8 −31.0 −32.5 −34.0 −35.5 −37.2 −38.8 −40.5 −42.2 −44.1 −45.9 −47.9 −49.9 −51.9 −54.0 −56.3 −58.5 −60.8 −63.2 −65.6 −68.0 −70.7 −73.3 −76.1 −79.0 −82.0 −85.1 −88.3 −91.5 −94.8 −98.2 −101.7 S22 Magnitude (dB) −2.91 −3.03 −3.15 −3.26 −3.38 −3.52 −3.66 −3.81 −3.99 −4.16 −4.34 −4.54 −4.75 −4.96 −5.20 −5.45 −5.71 −5.99 −6.29 −6.62 −6.96 −7.31 −7.71 −8.12 −8.57 −9.02 −9.54 −10.09 −10.63 −11.24 −11.86 −12.48 Angle (°) 140.8 139.7 138.7 137.7 136.7 135.6 134.4 133.3 132.3 131.1 130.1 129.0 127.9 126.9 125.8 124.8 123.8 122.7 121.8 120.9 120.0 119.4 118.8 118.2 117.7 117.5 117.6 117.7 118.4 119.5 120.9 123.2 Data Sheet ADL5604 ABSOLUTE MAXIMUM RATINGS ESD CAUTION Table 3. Parameter Supply Voltage, VSUP Input Power (50 Ω Impedance) Internal Power Dissipation (Paddle Soldered) θJA (Junction to Air) θJC (Junction to Paddle) Maximum Junction Temperature Lead Temperature (Soldering, 60 sec) Operating Temperature Range Storage Temperature Range Rating 6.5 V +25 dBm 3.9 W 32.1°C/W 6°C/W 150°C 240°C −40°C to +85°C −65°C to +150°C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. Rev. C | Page 7 of 23 ADL5604 Data Sheet 13 GND 14 GND 16 GND 15 GND PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 12 RFOUT RFIN 1 VBIAS 3 ADL5604 11 RFOUT TOP VIEW (Not to Scale) 10 RFOUT RFOUT GND 8 GND 7 GND 6 9 GND 5 VCC2 4 NOTES 1. THE PADDLE SHOULD BE CONNECTED TO BOTH THERMAL AND ELECTRICAL GROUND. 08220-003 RFIN 2 Figure 3. Pin Configuration Table 4. Pin Function Descriptions Pin No. 1, 2 5, 6, 7, 8, 13,14, 15, 16 3 Mnemonic RFIN GND VBIAS 4 VCC2 9, 10, 11, 12 RFOUT EP Description RF Input. Requires a dc blocking capacitor. Solder to a low impedance electrical and thermal ground plane. Dual Function Pin. Applying 5 V to this pin enables the bias circuit. Grounding this pin disables the device. When VBIAS is used alone to disable the ADL5604, the disable current is 13 mA. Under normal operation, this pin is connected to the power supply and draws approximately 5 mA of current. This pin can be grounded with the VBIAS pin to allow a disable current of