ADL5611ARKZ-R7

30 MHz to 6 GHz RF/IF Gain Block ADL5611 Data Sheet FUNCTIONAL BLOCK DIAGRAM Fixed gain of 22.2 dB Broad operation from 30 MHz to 6 GHz High dynamic range gain block Input and output internally matched to 50 Ω Integrated bias circuit OIP3 of 40.0 dBm at 900 MHz P1dB of 21.0 dBm at 900 MHz Noise figure of 2.1 dB at 900 MHz Single 5 V power supply Low quiescent current of 94 mA Wide operating temperature range of −40°C to +105°C Thermally efficient SOT-89 package ESD rating of ±1.5 kV (Class 1C) GND (2) ADL5611 BIAS 1 2 3 RFIN GND RFOUT 11508-001 FEATURES Figure 1. GENERAL DESCRIPTION The ADL5611 is a single-ended RF/IF gain block amplifier that provides broadband operation from 30 MHz to 6 GHz. The ADL5611 provides a low noise figure of 2.1 dB with a very high OIP3 of 40.0 dBm simultaneously, which delivers a high dynamic range. The ADL5611 provides a gain of 22.2 dB that is stable over frequency, temperature, and power supply, and from device to device. The amplifier is offered in the industry-standard SOT-89 package and is internally matched to 50 Ω at the input and output, making the ADL5611 easy to implement in a wide variety of applications. Rev. B The only external parts required are the input and output ac coupling capacitors, power supply decoupling capacitors, and bias inductor. The ADL5611 has a high ESD rating of ±1.5 kV (Class 1C) and is fully specified for operation across a wide temperature range of −40°C to +105°C. A fully populated RoHS compliant evaluation board is available. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2013–2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADL5611 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 30 MHz to 500 MHz Frequency Band..................................... 10 Functional Block Diagram .............................................................. 1 General......................................................................................... 11 General Description ......................................................................... 1 Applications Information .............................................................. 13 Revision History ............................................................................... 2 Basic Connections ...................................................................... 13 Specifications..................................................................................... 3 Typical Scattering Parameters (S-Parameters) ......................... 5 Soldering Information and Recommended PCB Land Pattern ....................................................................................................... 14 Absolute Maximum Ratings ............................................................ 7 W-CDMA ACPR Performance ................................................ 14 Thermal Resistance ...................................................................... 7 Evaluation Board ............................................................................ 15 ESD Caution .................................................................................. 7 Outline Dimensions ....................................................................... 16 Pin Configuration and Function Descriptions ............................. 8 Ordering Guide .......................................................................... 16 Typical Performance Characteristics ............................................. 9 500 MHz to 6 GHz Frequency Band.......................................... 9 REVISION HISTORY 12/15—Rev. A to Rev. B Updated Outline Dimensions ....................................................... 16 9/13—Rev. 0 to Rev. A Added Figure 19; Renumbered Sequentially .............................. 11 Changes to Figure 29 ...................................................................... 14 Updated Outline Dimensions ....................................................... 16 7/13—Revision 0: Initial Version Rev. B | Page 2 of 16 Data Sheet ADL5611 SPECIFICATIONS VPOS = 5 V and TA = 25°C, unless otherwise noted. Table 1. Parameter OVERALL FUNCTION Frequency Range FREQUENCY = 30 MHz Gain Output 1 dB Compression Point (P1dB) Output Third-Order Intercept (OIP3) Noise Figure 1 FREQUENCY = 140 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 350 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 700 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 900 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 1900 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 Test Conditions/Comments Min Typ 30 Δf = 1 MHz, output power (POUT) = 0 dBm per tone ±10 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone ±10 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone Rev. B | Page 3 of 16 6000 MHz 21.8 16.0 27.6 3.9 dB dBm dBm dB 18.9 ±0.42 ±0.45 ±0.09 16.3 27.2 3.3 dB dB dB dB dBm dBm dB 22.0 ±0.04 ±0.28 ±0.06 20.9 34.0 2.4 dB dB dB dB dBm dBm dB 22.2 ±0.02 ±0.26 ±0.08 21.0 39.6 2.1 dB dB dB dB dBm dBm dB 22.2 ±0.02 ±0.25 ±0.10 21.0 40.0 2.1 23.2 dB dB dB dB dBm dBm dB 20.4 21.4 ±0.07 ±0.34 ±0.20 20.6 37.0 2.4 22.4 dB dB dB dB dBm dBm dB Δf = 1 MHz, POUT = 0 dBm per tone Δf = 1 MHz, POUT = 0 dBm per tone Unit 21.2 ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Max ADL5611 Parameter FREQUENCY = 2140 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 2600 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 3500 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 4000 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 5000 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 FREQUENCY = 5800 MHz Gain vs. Frequency vs. Temperature vs. Supply Output 1 dB Compression Point Output Third-Order Intercept Noise Figure1 Data Sheet Test Conditions/Comments ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone ±50 MHz −40°C ≤ TA ≤ +105°C 4.75 V to 5.25 V Δf = 1 MHz, POUT = 0 dBm per tone Rev. B | Page 4 of 16 Min Typ Max Unit 21.2 ±0.05 ±0.38 ±0.23 20.6 35.8 2.6 dB dB dB dB dBm dBm dB 20.7 ±0.06 ±0.55 ±0.25 19.4 32.3 2.8 dB dB dB dB dBm dBm dB 20.3 ±0.03 ±1.05 ±0.26 17.4 28.6 3.1 dB dB dB dB dBm dBm dB 20.0 ±0.13 ±1.55 ±0.27 16.2 27.4 3.2 dB dB dB dB dBm dBm dB 16.3 ±0.16 ±1.49 ±0.28 16.0 27.0 4.4 dB dB dB dB dBm dBm dB 14.3 ±0.11 ±1.67 ±0.23 12.8 23.0 6.0 dB dB dB dB dBm dBm dB Data Sheet ADL5611 Parameter POWER INTERFACE Supply Voltage Supply Current vs. Temperature Power Dissipation 1 Test Conditions/Comments Min Typ Max Unit VPOS 4.75 5 94 −7/+14 470 5.25 124 V mA mA mW −40°C ≤ TA ≤ +105°C VPOS = 5 V Noise figure specified includes printed circuit board (PCB) traces losses. TYPICAL SCATTERING PARAMETERS (S-PARAMETERS) VPOS = 5 V and TA = 25°C. Table 2. Frequency (MHz) 30 50 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300 2400 2500 2600 2700 2800 2900 3000 3100 3200 3300 3400 3500 S11 Magnitude (dB) −19.413 −13.165 −7.702 −10.283 −13.623 −16.531 −13.489 −15.012 −16.953 −18.750 −20.402 −22.020 −23.568 −25.331 −27.267 −29.729 −33.265 −35.854 −34.321 −29.745 −26.887 −24.113 −21.301 −19.164 −17.568 −16.338 −15.187 −14.370 −13.733 −13.062 −12.653 −12.418 −12.019 −11.809 −11.972 −12.388 −12.849 Angle (°) −26.158 +18.866 −16.728 −70.711 −97.401 −116.624 −133.038 −155.101 −173.278 −191.016 −209.005 −226.338 −243.133 −258.964 −272.170 −280.677 −281.069 −260.621 −226.683 −218.694 −221.152 −228.131 −235.040 −245.484 −257.372 −268.596 −279.362 −290.528 −301.461 −311.936 −322.355 −332.177 −342.619 −354.255 −366.792 −377.671 −390.154 S21 Magnitude (dB) +21.776 +20.450 +17.424 +20.615 +21.750 +22.133 +21.878 +22.109 +22.166 +22.175 +22.157 +22.123 +22.077 +22.018 +21.957 +21.882 +21.812 +21.737 +21.648 +21.569 +21.438 +21.331 +21.256 +21.164 +21.078 +20.965 +20.863 +20.734 +20.606 +20.519 +20.435 +20.380 +20.411 +20.422 +20.411 +20.419 +20.412 Angle (°) +172.769 +161.606 +169.845 +170.893 +153.718 +137.323 −227.398 −242.602 −258.309 −273.359 −287.987 −302.271 −316.366 −330.209 −343.987 −357.634 −371.163 −384.666 −398.040 −411.423 −424.771 −438.049 −451.001 −464.099 −477.290 −490.408 −503.418 −516.421 −529.269 −541.969 −554.516 −567.048 −579.843 −592.914 −606.400 −619.528 −633.251 Rev. B | Page 5 of 16 S12 Magnitude (dB) −27.133 −28.149 −31.453 −28.530 −27.648 −27.393 −27.654 −27.407 −27.340 −27.310 −27.272 −27.262 −27.273 −27.269 −27.264 −27.273 −27.273 −27.266 −27.267 −27.245 −27.233 −27.225 −27.272 −27.274 −27.248 −27.207 −27.219 −27.195 −27.127 −27.084 −26.970 −26.772 −26.724 −26.607 −26.511 −26.359 −26.200 Angle (°) +0.556 −13.136 −6.433 −3.592 −17.328 −29.469 −30.240 −41.040 −52.626 −63.591 −74.251 −84.772 −94.790 −104.782 −114.842 −124.700 −134.354 −144.166 −154.033 −163.652 −173.766 −183.324 −193.034 −202.461 −212.036 −221.732 −231.237 −240.889 −250.483 −259.695 −269.348 −279.469 −289.424 −299.778 −309.746 −320.482 −331.064 S22 Magnitude (dB) −11.297 −7.839 −5.303 −7.558 −9.628 −10.723 −9.139 −9.456 −9.852 −10.087 −10.220 −10.281 −10.316 −10.341 −10.329 −10.350 −10.363 −10.357 −10.400 −10.392 −10.531 −10.566 −10.674 −10.724 −10.708 −10.706 −10.737 −10.755 −10.775 −10.809 −10.888 −11.086 −11.163 −11.348 −11.533 −12.017 −12.489 Angle (°) −165.214 −163.448 −189.380 −220.163 −229.758 −234.863 −242.984 −252.814 −259.624 −266.406 −273.138 −280.106 −286.874 −293.925 −300.962 −308.089 −314.919 −321.662 −328.324 −334.645 −341.717 −347.988 −352.991 −358.726 −364.342 −370.531 −376.605 −383.283 −390.170 −397.037 −404.594 −412.962 −420.818 −430.470 −440.976 −452.391 −465.304 ADL5611 Frequency (MHz) 3600 3700 3800 3900 4000 4100 4200 4300 4400 4500 4600 4700 4800 4900 5000 5100 5200 5300 5400 5500 5600 5700 5800 5900 6000 Data Sheet S11 Magnitude (dB) −13.681 −14.819 −16.480 −18.415 −20.901 −22.899 −20.175 −16.107 −12.487 −9.908 −8.294 −7.462 −6.742 −6.341 −5.850 −5.683 −5.393 −5.255 −4.941 −4.762 −4.751 −4.718 −4.803 −4.815 −4.846 Angle (°) −403.841 −418.280 −433.535 −450.193 −481.302 −530.706 −574.613 −607.497 −632.642 −655.826 −676.352 −692.336 −707.212 −719.044 −730.317 −740.078 −749.333 −757.862 −766.095 −775.169 −783.296 −791.495 −798.324 −805.589 −812.180 S21 Magnitude (dB) +20.385 +20.334 +20.321 +20.283 +20.107 +19.930 +19.528 +18.987 +18.248 +17.627 +17.415 +17.300 +17.180 +16.938 +16.723 +16.407 +16.142 +15.797 +15.601 +15.423 +15.212 +15.016 +14.811 +14.640 +14.474 Angle (°) −647.042 −661.029 −675.145 −689.975 −704.970 −719.959 −735.700 −750.647 −764.216 −775.099 −785.594 −797.596 −810.719 −823.703 −836.856 −849.613 −862.399 −874.886 −886.816 −899.572 −912.138 −925.031 −937.622 −950.405 −963.642 Rev. B | Page 6 of 16 S12 Magnitude (dB) −26.068 −25.962 −25.829 −25.641 −25.735 −25.751 −25.987 −26.349 −26.734 −26.846 −26.704 −26.413 −26.495 −26.376 −26.732 −26.564 −26.637 −26.764 −26.723 −26.813 −26.836 −26.865 −26.711 −26.625 −26.496 Angle (°) −341.857 −352.974 −364.326 -375.829 −388.338 −400.117 −412.869 −424.046 −433.978 −442.104 −451.707 −463.172 −473.259 −485.497 −496.442 −506.443 −518.454 −527.731 −538.802 −550.352 −560.482 −570.790 −581.237 −592.240 −603.172 S22 Magnitude (dB) −13.141 −13.812 −14.683 −15.473 −15.539 −15.329 −14.226 −12.606 −10.710 −9.069 −7.925 −7.360 −6.944 −6.709 −6.431 −6.520 −6.474 −6.577 −6.816 −7.136 −7.707 −8.420 −9.417 −10.700 −12.335 Angle (°) −480.219 −497.201 −517.273 −540.432 −563.571 −589.891 −611.397 −631.788 −651.154 −671.887 −691.567 −709.087 −725.426 −738.970 −752.403 −764.449 −775.847 −787.719 −798.987 −810.139 −821.411 −832.448 −843.000 −853.572 −863.102 Data Sheet ADL5611 ABSOLUTE MAXIMUM RATINGS THERMAL RESISTANCE Table 3. Parameter Supply Voltage, VPOS Input Power (50 Ω Impedance) Internal Power Dissipation (Pad Soldered to Ground) ESD Human Body Model (HBM) Rating (ESDA/ JEDEC JS-001-2011) Maximum Junction Temperature Operating Temperature Range Storage Temperature Range Table 4 lists the junction-to-air thermal resistance (θJA) and the junction-to-case thermal resistance (θJC) for the ADL5611. Rating 6.5 V 20 dBm 800 mW Table 4. Thermal Resistance Package Type 3-Lead SOT-89 (RK-3) ±1.5 kV Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. θJC2 9 Unit °C/W Measured on the ADL5611 evaluation board. For more information about board layout, see the Soldering Information and Recommended PCB Land Pattern section. 2 Based on simulation with a standard JEDEC board per JESD51. 1 150°C −40°C to +105°C −65°C to +150°C θJA1 52 ESD CAUTION Rev. B | Page 7 of 16 ADL5611 Data Sheet PIN CONFIGURATION AND FUNCTION DESCRIPTIONS RFIN 1 GND 2 ADL5611 TOP VIEW (2) GND (Not to Scale) NOTES 1. THE EXPOSED PAD ENCOMPASSES PIN 2 AND THE TAB AT THE TOP SIDE OF THE PACKAGE. SOLDER THE EXPOSED PAD TO A LOW IMPEDANCE GROUND PLANE FOR ELECTRICAL GROUNDING AND THERMAL TRANSFER. 11508-002 RFOUT 3 Figure 2. Pin Configuration Table 5. Pin Function Descriptions Pin No. 1 2 3 Mnemonic RFIN GND RFOUT EPAD Description RF Input. This pin requires a dc blocking capacitor. Ground. Connect this pin to a low impedance ground plane. RF Output and Supply Voltage. DC bias is provided to this pin through an inductor that is connected to the external power supply. The RF path requires a dc blocking capacitor. Exposed Pad. The exposed pad encompasses Pin 2 and the tab at the top side of the package. Solder the exposed pad to a low impedance ground plane for electrical grounding and thermal transfer. Rev. B | Page 8 of 16 Data Sheet ADL5611 TYPICAL PERFORMANCE CHARACTERISTICS 500 MHz TO 6 GHz FREQUENCY BAND 45 40 40 35 OIP3 (dBm) 25 GAIN (dB) 20 P1dB (dBm) 15 2600MHz 30 3500MHz 5000MHz 4000MHz 5800MHz 20 5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 15 –5 –3 –1 1 3 5 POUT PER TONE (dBm) 11508-106 NOISE FIGURE (dB) FREQUENCY (GHz) Figure 6. OIP3 vs. Output Power (POUT) and Frequency Figure 3. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency 25 0 +25°C 20 –5 +85°C –40°C +105°C 15 S-PARAMETERS (dB) 10 5 S22 –10 –15 S11 –20 –25 S12 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 FREQUENCY (GHz) –35 0.5 11508-104 0 0.5 45 8 40 40 7 35 35 30 30 25 25 +105°C 15 15 10 10 5 5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 0 6.0 FREQUENCY (GHz) NOISE FIGURE (dB) 20 P1dB (dBm) +85°C 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6 5 4 +105°C +85°C +25°C –40°C 3 2 1 11508-105 +25°C 2.0 Figure 7. Output Return Loss (S22), Input Return Loss (S11), and Reverse Isolation (S12) vs. Frequency 45 –40°C 1.5 FREQUENCY (GHz) Figure 4. Gain vs. Frequency and Temperature 20 1.0 11508-107 –30 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 FREQUENCY (GHz) Figure 8. Noise Figure vs. Frequency and Temperature Figure 5. OIP3 and P1dB vs. Frequency and Temperature Rev. B | Page 9 of 16 6.0 11508-108 GAIN (dB) 900MHz 1900MHz 2140MHz 25 10 0 0.5 OIP3 (dBm) 700MHz 35 OIP3 (dBm) 30 11508-103 NOISE FIGURE, GAIN, P1dB, OIP3 (dB, dBm) 45 ADL5611 Data Sheet 30 MHz TO 500 MHz FREQUENCY BAND 45 40 40 35 OIP3 (dBm) 25 GAIN (dB) 20 P1dB (dBm) 15 140MHz 30 350MHz 25 10 20 5 NOISE FIGURE (dB) 0 50 100 150 200 250 300 350 400 450 500 FREQUENCY (MHz) 15 –5 –3 –1 1 3 5 POUT PER TONE (dBm) Figure 9. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency, Low Frequency Configuration 11508-112 0 Figure 12. OIP3 vs. Output Power (POUT) and Frequency, Low Frequency Configuration 25 0 –40°C –5 20 +25°C 15 S-PARAMETERS (dB) +105°C GAIN (dB) 30MHz 35 OIP3 (dBm) 30 11508-109 NOISE FIGURE, GAIN, P1dB, OIP3 (dB, dBm) 45 +85°C 10 S22 –10 S11 –15 –20 –25 S12 5 50 100 150 200 250 300 350 400 450 500 FREQUENCY (MHz) –35 8 40 40 7 35 35 30 30 20 +25°C NOISE FIGURE (dB) 25 P1dB (dBm) +105°C +85°C 5 10 10 5 5 1 0 500 0 50 100 150 200 250 300 350 400 450 250 300 350 400 450 500 FREQUENCY (MHz) +25°C +105°C 3 15 0 200 –40°C 4 15 0 150 6 2 11508-111 OIP3 (dBm) 45 20 100 Figure 13. Output Return Loss (S22), Input Return Loss (S11), and Reverse Isolation (S12) vs. Frequency, Low Frequency Configuration 45 –40°C 50 FREQUENCY (MHz) Figure 10. Gain vs. Frequency and Temperature, Low Frequency Configuration 25 0 Figure 11. OIP3 and P1dB vs. Frequency and Temperature, Low Frequency Configuration +85°C 0 50 100 150 200 250 300 350 400 450 FREQUENCY (MHz) Figure 14. Noise Figure vs. Frequency and Temperature, Low Frequency Configuration Rev. B | Page 10 of 16 500 11508-114 0 11508-110 0 11508-113 –30 Data Sheet ADL5611 GENERAL 115 130 125 110 SUPPLY CURRENT (mA) 110 105 5.25V 100 5V 95 90 105 5.25V 100 80 –40 –30 –20 –10 0 4.75V 90 4.75V 85 5V 95 10 20 30 40 50 60 70 80 90 100 110 TEMPERATURE (°C) 85 –5 0 15 20 Figure 18. Supply Current vs. POUT at 900 MHz 40 115 35 110 30 105 SUPPLY CURRENT (mA) 25 20 15 10 5V, +105°C 5V, +85°C 100 5V, +25°C 95 5V, –40°C 90 85 80 5 22.10 22.20 22.30 22.40 22.50 GAIN (dB) 75 –6 11508-122 22.00 –4 –2 0 2 4 6 8 10 12 14 16 18 20 22 POUT (dBm) Figure 16. Gain Distribution at 900 MHz 11508-219 PERCENTAGE (%) 10 POUT (dBm) Figure 15. Supply Current vs. Temperature 0 5 11508-124 115 11508-121 SUPPLY CURRENT (mA) 120 Figure 19. Supply Current vs. POUT for Various Temperatures, VCC = 5 V at 900 MHz 60 50 45 40 PERCENTAGE (%) 40 30 20 35 30 25 20 15 10 10 21.1 21.2 21.3 21.4 21.5 21.6 21.7 GAIN (dB) 21.7 0 20.3 20.4 20.5 20.6 20.7 20.8 20.9 GAIN (dB) Figure 20. Gain Distribution at 2600 MHz Figure 17. Gain Distribution at 1900 MHz Rev. B | Page 11 of 16 21.0 11508-119 5 0 11508-117 PERCENTAGE (%) 50 ADL5611 Data Sheet 40 90 35 80 70 PERCENTAGE (%) 25 20 15 10 50 40 30 20 5 10 19.6 19.7 19.8 19.9 20.0 20.2 20.1 20.3 GAIN (dB) 0 11508-120 0 60 1.8 1.9 2.0 2.1 2.2 2.3 2.4 11508-126 PERCENTAGE (%) 30 2.5 NOISE FIGURE (dB) Figure 24. Noise Figure Distribution at 900 MHz Figure 21. Gain Distribution at 4000 MHz 0 60 –10 –20 HARMONICS (dBc) PERCENTAGE (%) 50 40 30 20 –30 –40 –50 H2 –60 H3 –70 10 P1dB (dBm) 35 30 20 15 10 5 38 39 40 41 42 43 44 45 OIP3 (dBm) 11508-125 PERCENTAGE (%) 25 37 1.0 1.5 2.0 2.5 3.0 3.5 4.0 FREQUENCY (GHz) Figure 25. Single-Tone Harmonics vs. Frequency, POUT = 0 dBm Figure 22. P1dB Distribution at 900 MHz 0 –90 0.5 Figure 23. OIP3 Distribution at 900 MHz, POUT = 0 dBm per Tone Rev. B | Page 12 of 16 11508-127 20.5 20.6 20.7 20.8 20.9 21.0 21.1 21.2 21.3 21.4 21.5 11508-123 0 –80 Data Sheet ADL5611 Figure 26 shows the basic connections for operating the ADL5611. The device supports operation from 30 MHz to 6 GHz. However, for optimal performance at lower frequency bands, the board configuration must be adjusted. Table 6 lists the recommended board configuration to operate the device at various frequency bands. GND VPOS 1µF C5 1.2nF C4 ADL5611 35 30 25 20 15 3 50 100 150 200 250 300 350 400 450 500 Figure 27. Noise Figure, Gain, P1dB, and OIP3 vs. Frequency, 30 MHz to 500 MHz, Comparison of Performance with the Optimized Settings and the Default Configuration RFOUT C2 0 FREQUENCY (MHz) L1 C1 NOISE FIGURE (dB), DEFAULT SETUP CONFIGURATION NOISE FIGURE (dB), LOW FREQUENCY CONFIGURATION 5 0 11508-222 2 RFOUT GND RFIN 1 P1dB (dBm), DEFAULT SETUP CONFIGURATION P1dB (dBm), LOW FREQUENCY CONFIGURATION 10 68pF RFIN OIP3 (dBm), DEFAULT SETUP CONFIGURATION OIP3 (dBm), LOW FREQUENCY CONFIGURATION GAIN (dB), DEFAULT SETUP CONFIGURATION GAIN (dB), LOW FREQUENCY CONFIGURATION 40 0 Figure 26. Basic Connections At low frequencies, the device exhibits improved performance with the suggested setup configuration listed in Table 6. Figure 27 and Figure 28 provide a comparison of the performance of the device at the 30 MHz to 500 MHz band when driven with the optimal setup configuration and the default setup configuration. S-PARAMETERS (dB) A 5 V dc bias is supplied to the amplifier through the bias inductor connected to RFOUT (Pin 3). Decouple the bias voltage using 68 pF, 1.2 nF, and 1 µF power supply decoupling capacitors. The typical current consumption for the ADL5611 is 94 mA. S22, DEFAULT SETUP CONFIGURATION S11, DEFAULT SETUP CONFIGURATION –5 –10 –15 S22, LOW FREQUENCY CONFIGURATION S11, LOW FREQUENCY CONFIGURATION –20 –25 –30 –35 S12, DEFAULT SETUP CONFIGURATION S12, LOW FREQUENCY CONFIGURATION 0 50 100 150 200 250 300 350 FREQUENCY (MHz) 400 450 500 11508-130 (2) GND C6 NOISE FIGURE, GAIN, P1dB, OIP3 (dB, dBm) 45 BASIC CONNECTIONS 11508-129 APPLICATIONS INFORMATION Figure 28. Output Return Loss (S22), Input Return Loss (S11), and Reverse Isolation (S12), 30 MHz to 500 MHz, Comparison of Performance with the Optimized Settings and the Default Configuration Table 6. Recommended Components for Basic Connections Frequency Band 500 MHz to 6 GHz 30 MHz to 500 MHz C1 (nF) 100 100 AC Coupling Capacitors (0402) C2 (nF) 100 100 Rev. B | Page 13 of 16 DC Bias Inductor (0603HP) L1 (nH) 43 1000 ADL5611 Data Sheet SOLDERING INFORMATION AND RECOMMENDED PCB LAND PATTERN Figure 29 shows the recommended land pattern for the ADL5611. To minimize thermal impedance, the exposed pad on the underside of the SOT-89 package is soldered to a ground plane, along with Pin 2. If multiple ground layers exist, stitch the layers together using vias. 1.80mm Thermal simulation suggests a junction temperature that is 10°C higher than the top of package temperature. With additional measurements of the ambient temperature and input/output power, θJA can be determined. W-CDMA ACPR PERFORMANCE Figure 30 shows a plot of the adjacent channel power ratio (ACPR) vs. POUT for the ADL5611. The signal type used is a single wideband code division multiple access (W-CDMA) carrier (Test Model 1-64) at 2140 MHz. This signal is generated by a very low ACPR source. ACPR is measured at the output by a high dynamic range spectrum analyzer that incorporates an instrument noise correction function. 0.635mm 3.48mm 5.37mm 0.20mm 0.62mm 0.86mm –10 –20 –30 –40 –50 –60 –70 –80 –90 –20 1.27mm –15 –10 –5 0 5 10 POUT (dBm) 11508-138 0.762mm ACPR AT 5MHz CARRIER OFFSET (dBc) 0 0.86mm Figure 30. ACPR vs. POUT, Single W-CDMA Carrier (Test Model 1-64) at 2140 MHz 3.00mm The ADL5611 achieves an ACPR of −79 dBc at an output power level of −5 dBm, at which point the device noise and not distortion begins to dominate the power in the adjacent channels. At an output power level of 5 dBm, ACPR is still very low at −62 dBc. 11508-229 1.50mm Figure 29. Recommended Land Pattern The land pattern on the ADL5611 evaluation board provides a measured thermal resistance (θJA) of 52°C/W. To measure θJA, the temperature at the top of the SOT-89 package is sensed with an IR temperature gun. Rev. B | Page 14 of 16 Data Sheet ADL5611 EVALUATION BOARD GND Figure 31 shows the ADL5611 evaluation board layout. Figure 32 shows the schematic for the evaluation board. The board is powered by a single 5 V supply. Table 7 lists the components used on the evaluation board. Power can be applied to the board through clip on terminals (VCC and GND). VCC (2) GND C6 R5 0Ω 1µF C5 1.2nF C4 ADL5611 3 C1 100nF L1 43nH RFOUT C2 100nF 11508-327 Figure 32. Evaluation Board Schematic Figure 31. Evaluation Board Layout (Top) Table 7. Evaluation Board Configuration Options Component C1, C2 L1 R5 VCC and GND C4, C5, C6 Description AC coupling capacitors DC bias inductor Bias resistor Clip on terminals for power supply Power supply decoupling capacitors Default Value C1, C2 = 100 nF, 0402 L1 = 43 nH, 0603 (Coilcraft 0603HP or equivalent) R5 = 0 Ω, 0402 Not applicable C4 = 68 pF, 0603; C5 = 1.2 nF, 0603; C6 = 1 µF, 1206 Rev. B | Page 15 of 16 11508-228 2 RFOUT RFIN GND RFIN 68pF 1 ADL5611 Data Sheet OUTLINE DIMENSIONS 1.75 1.55 (2) 4.25 3.94 1 2 2.413 2.380 2.337 2.60 2.30 3 1.20 0.75 1.50 TYP 1.270 1.252 1.219 BOTTOM VIEW 0.635 0.569 0.508 3.00 TYP TOP VIEW 2.29 2.14 4.60 4.40 SIDE VIEW END VIEW 0.52 0.32 COPLANARITY 0.076 MAX COMPLIANT TO JEDEC STANDARDS TO-243 11-09-2015-D 0.56 0.36 PKG-003480 1.60 1.40 0.44 0.35 Figure 33. 3-Lead Small Outline Transistor Package [SOT-89] (RK-3) Dimensions shown in millimeters ORDERING GUIDE Model 1 ADL5611ARKZ-R7 ADL5611-EVALZ 1 Temperature Range −40°C to +105°C −40°C to +105°C Package Description 3-Lead Small Outline Transistor Package [SOT-89], 7“ Tape and Reel Evaluation Board Z = RoHS Compliant Part. ©2013–2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D11508-0-12/15(B) Rev. B | Page 16 of 16 Package Option RK-3