ADR02ARZ-REEL

PIN CONFIGURATIONS Ultracompact SC70 and TSOT packages Low temperature coefficient 8-lead SOIC: 3 ppm/°C typical 5-lead SC70: 9 ppm/°C maximum 5-lead TSOT: 9 ppm/°C maximum Initial accuracy ±0.1% No external capacitor required Low noise 10 µV p-p, 0.1 Hz to 10.0 Hz (ADR02) Wide operating range ADR01: 12.0 V to 36.0 V ADR02: 7.0 V to 36.0 V ADR03: 4.5 V to 36.0 V ADR06: 5.0 V to 36.0 V High output current 10 mA Wide temperature range: −40°C to +125°C ADR01/ADR02/ADR03 pin compatible to industrystandard REF01/REF02/REF03 ADR01, ADR02, ADR03 and ADR06 SOIC (A grade) qualified for automotive applications TEMP 1 GND 2 VIN 3 ADR01/ ADR02/ ADR03/ ADR06 5 TRIM TOP VIEW 4 VOUT (Not to Scale) 02747-001 FEATURES Figure 1. 5-Lead, SC70/TSOT Surface-Mount Packages NIC 1 VIN 2 TEMP 3 GND 4 ADR01/ ADR02/ ADR03/ ADR06 8 NIC 7 NIC 6 VOUT TOP VIEW 5 TRIM (Not to Scale) NOTES 1. NIC = NO INTERNAL CONNECT. 02747-002 Data Sheet Ultracompact, Precision 10.0 V/5.0 V/2.5 V/3.0 V Voltage References ADR01/ADR02/ADR03/ADR06 Figure 2. 8-Lead, SOIC Surface-Mount Package APPLICATIONS Precision data acquisition systems High resolution converters Industrial process control systems Precision instruments Auto battery monitoring PCMCIA cards GENERAL DESCRIPTION The ADR01, ADR02, ADR03, and ADR06 are precision 10.0 V, 5.0 V, 2.5 V, and 3.0 V, respectively, band gap voltage references featuring high accuracy, high stability, and low power consumption. The devices are housed in tiny, 5-lead SC70 and TSOT packages, as well as in 8-lead SOIC version. The SOIC version of the ADR01, ADR02, and ADR03 are drop-in replacements1 to the industry-standard REF01, REF02, and REF03. The small footprint and wide operating range make the ADR01, ADR02, ADR03, and ADR06 references ideally suited for generalpurpose and space-constrained applications. With an external buffer and a simple resistor network, the TEMP pin can be used for temperature sensing and approximation. A TRIM pin is provided on the devices for fine adjustment of the output voltage. 1 The ADR01, ADR02, ADR03, and ADR06 are compact, low drift voltage references that provide a stable output voltage from a wide supply voltage range. The devices are available in 5-lead SC70 and TSOT packages and an 8-lead SOIC package with A, B, and C grade selections. All devices are specified over the extended industrial (−40°C to +125°C) temperature range. The ADR01, ADR02, ADR03, and ADR06 A grade in 8-lead SOIC are qualified for automotive applications. Table 1. Selection Guide Part Number ADR01 ADR02 ADR03 ADR06 Output Voltage (V) 10.0 5.0 2.5 3.0 ADR01, ADR02, and ADR03 are component level compatible with REF01, REF02, and REF03, respectively. No guarantees for system level compatibility are implied. SOIC versions of ADR01, ADR02, and ADR03 are pin-to-pin compatible with the 8-lead SOIC versions of the REF01, REF02, REF03, respectively, with the additional temperature monitoring function. Rev. S Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2002–2019 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADR01/ADR02/ADR03/ADR06 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Typical Performance Characteristics ..............................................9 Applications ....................................................................................... 1 Terminology .................................................................................... 15 Pin Configurations ........................................................................... 1 Applications Information .............................................................. 16 General Description ......................................................................... 1 Overview ..................................................................................... 16 Revision History ............................................................................... 2 Applying the ADR01/ADR02/ADR03/ADR06 ...................... 16 Specifications..................................................................................... 4 Low Cost Current Source .......................................................... 17 ADR01 Electrical Characteristics ............................................... 4 Precision Current Source with Adjustable Output ................ 17 ADR02 Electrical Characteristics ............................................... 5 Programmable 4 mA to 20 mA Current Transmitter............ 18 ADR03 Electrical Characteristics ............................................... 6 Precision Boosted Output Regulator ....................................... 18 ADR06 Electrical Characteristics ............................................... 7 Outline Dimensions ....................................................................... 19 Absolute Maximum Ratings............................................................ 8 Ordering Guides ......................................................................... 20 Thermal Resistance ...................................................................... 8 Automotive Products ................................................................. 21 ESD Caution .................................................................................. 8 REVISION HISTORY 12/2019—Rev. R to Rev. S Changes to Features Section and General Description Section........ 1 Changes to Table 2 ............................................................................ 4 Changes to Table 3 ............................................................................ 5 Changes to Table 4 ............................................................................ 6 Changes to Table 5 ............................................................................ 7 Changes to Thermal Resistance Section........................................ 8 Changes to Figure 19 and Figure 20 ............................................. 11 Changes to Figure 21 and Figure 22 ............................................. 12 Replaced Figure 24 ......................................................................... 12 Added Figure 25 and Figure 26; Renumbered Sequentially ..... 12 Added Figure 27.............................................................................. 13 Change to Figure 34 and Figure 35 .............................................. 14 Moved Terminology Section ......................................................... 15 Changes to Terminology Section.................................................. 15 Changes to Overview Section and Figure 38 .............................. 16 Changes to Temperature Monitoring Section, Figure 40, Figure 41, and Figure 42 ................................................................ 17 Changes to Figure 43 and Figure 45 ............................................. 18 Updated Outline Dimensions ....................................................... 19 Changes to ADR01 Ordering Guide and ADR02 Ordering Guide ................................................................................................ 20 Changes to ADR03 Ordering Guide and ADR06 Ordering Guide ................................................................................................ 21 1/2012—Rev. Q to Rev. R Changes to Table 2 ............................................................................ 4 Changes to ADR01 Ordering Guide .......................................... 190 11/2011—Rev. P to Rev. Q Changes to General Description Section ...................................... 1 Changes to Table 2 ............................................................................ 4 Changes to Table 3.............................................................................5 Changes to Table 4.............................................................................6 Changes to Table 5.............................................................................7 10/2011 Rev. O to Rev. P Changes to Features Section, Applications Section, and General Description Section ...........................................................................1 Changes to ADR01 Electrical Characteristics Section and Table 2..........................................................................................4 Changes to ADR02 Electrical Characteristics Section and Table 3..........................................................................................5 Changes to ADR03 Electrical Characteristics Section and Table 4..........................................................................................6 Changes to ADR06 Electrical Characteristics Section and Table 5..........................................................................................7 Changes to Ordering Guides ........................................................ 19 Changes to Automotive Products Section .................................. 20 10/2010—Rev. N to Rev. O Deleted Negative Reference Section and Figure 38 ................... 16 Changes to ADR02 Ordering Guide ............................................ 19 7/2010—Rev. M to Rev. N Changes to Figure 2 ...........................................................................1 Changes to ADR01 Ordering Guide ............................................ 19 Added Automotive Products Section .......................................... 20 4/2010—Rev. L to Rev. M Changes to Features Section and General Description Section ........ 1 Changes to Figure 41...................................................................... 17 Changes to Ordering Guides Section .......................................... 19 Rev. S | Page 2 of 21 Data Sheet ADR01/ADR02/ADR03/ADR06 12/2008—Rev. K to Rev. L Changes to Maximum Input Voltage ............................... Universal Removed Die Version ........................................................ Universal Changes to Table 2 ............................................................................ 3 Changes to Table 3 ............................................................................ 4 Changes to Table 4 ............................................................................ 5 Changes to Table 5 ............................................................................ 6 Deleted Table 6 and Figure 3 ........................................................... 7 Changes to Terminology Section .................................................... 8 Added Input and Output Capacitors Section ..............................15 2/2008—Rev. J to Rev. K Changes to Terminology Section .................................................... 9 Changes to Ordering Guide ...........................................................19 3/2007—Rev. I to Rev. J Renamed Parameters and Definitions Section.............................. 9 Changes to Temperature Monitoring Section .............................15 Changes to Ordering Guide ...........................................................19 7/2005—Rev. H to Rev. I Changes to Table 5 ............................................................................ 7 Updated Outline Dimensions ........................................................19 Changes to Ordering Guide ...........................................................19 12/2004—Rev. G to Rev. H Changes to ADR06 Ordering Guide .............................................20 9/2004—Rev. F to Rev. G Changes to Table 2 ............................................................................ 4 Changes to Table 3 ............................................................................ 5 Changes to Table 4 ............................................................................ 6 Changes to Table 5 ............................................................................ 7 Changes to Ordering Guide ...........................................................19 7/2004—Rev. E to Rev. F Changes to ADR02 Electrical Characteristics, Table 2 ................ 4 Changes to Ordering Guide ........................................................... 19 2/2004—Rev. D to Rev. E Added C grade .................................................................... Universal Changes to Outline Dimensions ................................................... 19 Updated Ordering Guide ............................................................... 20 8/2003—Rev. C to Rev D Added ADR06 .................................................................... Universal Change to Figure 27 ........................................................................ 13 6/2003—Rev. B to Rev C Changes to Features Section ............................................................ 1 Changes to General Description Section ....................................... 1 Changes to Figure 2 .......................................................................... 1 Changes to Specifications Section .................................................. 2 Addition of Dice Electrical Characteristics and Layout .............. 6 Changes to Absolute Maximum Ratings Section ......................... 7 Updated SOIC (R-8) Outline Dimensions................................... 19 Changes to Ordering Guide ........................................................... 20 2/2003—Rev. A to Rev. B Added ADR03 .................................................................... Universal Added TSOT-5 (UJ) Package............................................ Universal Updated Outline Dimensions........................................................ 18 12/2002—Rev. 0 to Rev. A Changes to Features Section ............................................................ 1 Changes to General Description ..................................................... 1 Table I Deleted ................................................................................... 1 Changes to ADR01 Specifications .................................................. 2 Changes to ADR02 Specifications .................................................. 3 Changes to Absolute Maximum Ratings Section ......................... 4 Changes to Ordering Guide ............................................................. 4 Updated Outline Dimensions........................................................ 12 Rev. S | Page 3 of 21 ADR01/ADR02/ADR03/ADR06 Data Sheet SPECIFICATIONS ADR01 ELECTRICAL CHARACTERISTICS VIN = 12.0 V to 36.0 V, VIN = 12.0 V to 24.0 V for ADR01WARZ, TA = 25°C, unless otherwise noted. Table 2. Parameter OUTPUT VOLTAGE Symbol VO INITIAL ACCURACY VOERR Test Conditions/Comments A and C grades B grade ADR01WARZ A and C grades B grade ADR01WARZ TEMPERATURE COEFFICIENT TCVO DROPOUT VOLTAGE LINE REGULATION VDO ∆VO/∆VIN LOAD REGULATION ∆VO/∆ILOAD QUIESCENT CURRENT VOLTAGE NOISE IIN eN p-p VOLTAGE NOISE DENSITY TURN-ON SETTLING TIME LONG-TERM STABILITY 1 OUTPUT VOLTAGE HYSTERESIS RIPPLE REJECTION RATIO SHORT CIRCUIT TO GND TEMPERATURE SENSOR Voltage Output at TEMP Pin Temperature Sensitivity eN tR ΔVOUT_LTD ∆VOUT_HYS RRR ISC 1 Min 9.990 9.995 9.986 −10 −0.1 −5 −0.05 −14 −0.14 A grade, 8-lead SOIC, −40°C < TA < +125°C A grade, 5-lead TSOT, −40°C < TA < +125°C A grade, 5-lead SC70, −40°C < TA < +125°C B grade, 8-lead SOIC, −40°C < TA < +125°C B grade, 5-lead TSOT, −40°C < TA < +125°C B grade, 5-lead SC70, −40°C < TA < +125°C C grade, 8-lead SOIC, −40°C < TA < +125°C Typ 10.000 10.000 10.000 10 Max 10.010 10.005 10.014 +10 +0.1 +5 +0.05 +14 +0.14 10 25 25 3 9 9 40 7 30 Unit V V V mV % mV % mV % ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C V ppm/V 40 70 ppm/mA 0.65 20 2 475 4 50 70 −75 30 1 mA µV p-p ppm p-p nV/√Hz µs ppm ppm dB mA 3 1 2 VIN = 12.0 V to 36.0 V, VIN = 12.0 V to 26.0 V for ADR01WARZ, −40°C < TA < +125°C Load current (ILOAD) = 0 mA to 10 mA, −40°C < TA < +125°C, VIN = 15.0 V No load, −40°C < TA < +125°C 0.1 Hz to 10.0 Hz 1 kHz 1000 hours Input frequency (fIN) = 10 kHz VTEMP TCVTEMP 550 1.96 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period. Rev. S | Page 4 of 21 mV mV/°C Data Sheet ADR01/ADR02/ADR03/ADR06 ADR02 ELECTRICAL CHARACTERISTICS VIN = 7.0 V to 36.0 V, VIN = 7.0 V to 26.0 V for ADR02WARZ, TA = 25°C, unless otherwise noted. Table 3. Parameter OUTPUT VOLTAGE Symbol VO INITIAL ACCURACY VOERR Test Conditions/Comments A and C grades B grade A and C grades B grade TEMPERATURE COEFFICIENT TCVO DROPOUT VOLTAGE LINE REGULATION VDO ∆VO/∆VIN LOAD REGULATION ∆VO/∆ILOAD QUIESCENT CURRENT VOLTAGE NOISE IIN eN p-p VOLTAGE NOISE DENSITY TURN-ON SETTLING TIME LONG-TERM STABILITY 1 OUTPUT VOLTAGE HYSTERESIS eN tR ΔVOUT_LTD ∆VOUT_HYS RIPPLE REJECTION RATIO SHORT CIRCUIT TO GND TEMPERATURE SENSOR Voltage Output at TEMP Pin Temperature Sensitivity RRR ISC 1 Min 4.995 4.997 −5 −0.1 −3 −0.06 A grade, 8-lead SOIC, −40°C < TA < +125°C A grade, 5-lead TSOT, −40°C < TA < +125°C A grade, 5-lead SC70, −40°C < TA < +125°C A grade, 5-lead SC70, −55°C < TA < +125°C B grade, 8-lead SOIC, −40°C < TA < +125°C B grade, 5-lead TSOT, −40°C < TA < +125°C B grade, 5-lead SC70, −40°C < TA < +125°C C grade, 8-lead SOIC, −40°C < TA < +125°C Typ 5.000 5.000 10 Max 5.005 5.003 +5 +0.1 +3 +0.06 10 25 25 30 3 9 9 40 7 30 Unit V V mV % mV % ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C V ppm/V 7 40 40 70 ppm/V ppm/mA 45 80 ppm/mA 0.65 10 2 240 4 50 70 80 −75 30 1 mA µV p-p ppm p-p nV/√Hz µs ppm ppm ppm dB mA 3 1 2 VIN = 7.0 V to 36.0 V, VIN = 7.0 V to 26.0 V for ADR02WARZ, −40°C < TA < +125°C VIN = 7.0 V to 36.0 V, −55°C < TA < +125°C ILOAD = 0 mA to 10 mA, −40°C < TA < +125°C, VIN = 10.0 V ILOAD = 0 mA to 10 mA, −55°C < TA < +125°C, VIN = 10.0 V No load, −40°C < TA < +125°C 0.1 Hz to 10.0 Hz 1 kHz 1000 hours −55°C < TA < +125°C fIN = 10 kHz VTEMP TCVTEMP 550 1.96 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period. Rev. S | Page 5 of 21 mV mV/°C ADR01/ADR02/ADR03/ADR06 Data Sheet ADR03 ELECTRICAL CHARACTERISTICS VIN = 4.5 V to 36.0 V, VIN = 4.5 V to 26.0 V for ADR03WARZ, TA = 25°C, unless otherwise noted. Table 4. Parameter OUTPUT VOLTAGE Symbol VO INITIAL ACCURACY VOERR Test Conditions/Comments A and C grades B grades A and C grades B grades TEMPERATURE COEFFICIENT TCVO DROPOUT VOLTAGE LINE REGULATION VDO ∆VO/∆VIN LOAD REGULATION ∆VO/∆ILOAD Min 2.495 2.4975 −5 −0.2 −2.5 −0.1 A grade, 8-lead SOIC, −40°C < TA < +125°C A grade, 5-lead TSOT, −40°C < TA < +125°C A grade, 5-lead SC70, −40°C < TA < +125°C A grade, 5-lead SC70, −55°C < TA < +125°C B grade, 8-lead SOIC, −40°C < TA < +125°C B grade, 5-lead TSOT, −40°C < TA < +125°C B grade, 5-lead SC70, −40°C < TA < +125°C C grade, 8-lead SOIC, −40°C < TA < +125°C Typ 2.500 2.5000 3 1 10 Max 2.505 2.5025 +5 +0.2 +2.5 +0.1 10 25 25 30 3 9 9 40 Unit V V mV % mV % ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C 2 VIN = 4.5 V to 36.0 V, VIN = 4.5 V to 26.0 V for ADR03WARZ, −40°C < TA < +125°C VIN = 4.5 V to 36.0 V, −55°C < TA < +125°C ILOAD = 0 mA to 10 mA, −40°C < TA < +125°C, VIN = 7.0 V ILOAD = 0 mA to 10 mA, −55°C < TA < +125°C, VIN = 7.0 V No load, −40°C < TA < +125°C 0.1 Hz to 10.0 Hz 7 30 V ppm/V 7 25 40 70 ppm/V ppm/mA 45 80 ppm/mA 0.65 5 2 1 mA µV p-p ppm p-p 1 kHz 115 4 50 70 80 −75 nV/√Hz µs ppm ppm ppm dB QUIESCENT CURRENT VOLTAGE NOISE IIN eN p-p VOLTAGE NOISE DENSITY TURN-ON SETTLING TIME LONG-TERM STABILITY 1 OUTPUT VOLTAGE HYSTERESIS eN tR ΔVOUT_LTD ∆VOUT_HYS RIPPLE REJECTION RATIO RRR SHORT CIRCUIT TO GND TEMPERATURE SENSOR Voltage Output at TEMP Pin Temperature Sensitivity ISC 30 mA VTEMP TCVTEMP 550 1.96 mV mV/°C 1 1000 hours −55°C < TA < +125°C fIN = 10 kHz The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period. Rev. S | Page 6 of 21 Data Sheet ADR01/ADR02/ADR03/ADR06 ADR06 ELECTRICAL CHARACTERISTICS VIN = 5.0 V to 36.0 V, VIN = 5.0 V to 26.0 V for ADR06WARZ, TA = 25°C, unless otherwise noted. Table 5. Parameter OUTPUT VOLTAGE Symbol VO INITIAL ACCURACY VOERR Test Conditions/Comments A and C grades B grade A and C grades B grade TEMPERATURE COEFFICIENT TCVO DROPOUT VOLTAGE LINE REGULATION VDO ∆VO/∆VIN LOAD REGULATION ∆VO/∆ILOAD QUIESCENT CURRENT VOLTAGE NOISE IIN eN p-p VOLTAGE NOISE DENSITY TURN-ON SETTLING TIME LONG-TERM STABILITY 1 OUTPUT VOLTAGE HYSTERESIS RIPPLE REJECTION RATIO SHORT CIRCUIT TO GND TEMPERATURE SENSOR Voltage Output at TEMP Pin Temperature Sensitivity eN tR ΔVOUT_LTD ∆VOUT_HYS RRR ISC 1 Min 2.994 2.997 −6 −0.2 −3 −0.1 A grade, 8-lead SOIC, −40°C < TA < +125°C A grade, 5-lead TSOT, −40°C < TA < +125°C A grade, 5-lead SC70, −40°C < TA < +125°C B grade, 8-lead SOIC, −40°C < TA < +125°C B grade, 5-lead TSOT, −40°C < TA < +125°C B grade, 5-lead SC70, −40°C < TA < +125°C C grade, 8-lead SOIC, −40°C < TA < +125°C Typ 3.000 3.000 10 Max 3.006 3.003 +6 +0.2 +3 +0.1 10 25 25 3 9 9 40 7 30 Unit V V mV % mV % ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C ppm/°C V ppm/V 40 70 ppm/mA 0.65 6 2 127 4 50 70 −75 30 1 mA µV p-p ppm p-p nV/√Hz µs ppm ppm dB mA 3 1 2 VIN = 5.0 V to 36.0 V, VIN = 5.0 V to 26.0 V for ADR06WARZ, −40°C < TA < +125°C ILOAD = 0 mA to 10 mA, −40°C < TA < +125°C, VIN = 7.0 V No load, −40°C < TA < +125°C 0.1 Hz to 10.0 Hz 1 kHz 1000 hours fIN = 10 kHz VTEMP TCVTEMP 550 1.96 The long-term stability specification is noncumulative. The drift in subsequent 1000 hour periods is significantly lower than in the first 1000 hour period. Rev. S | Page 7 of 21 mV mV/°C ADR01/ADR02/ADR03/ADR06 Data Sheet ABSOLUTE MAXIMUM RATINGS Ratings are at 25°C, unless otherwise noted. THERMAL RESISTANCE Table 6. Thermal performance is directly linked to printed circuit board (PCB) design and operating environment. Careful attention to PCB thermal design is required. Parameter Supply Voltage Output Short-Circuit Duration to GND Temperature Storage Range Operating Range Junction Range Lead (Soldering, 60 sec) Rating 36.0 V Indefinite Table 7. Thermal Resistance −65°C to +150°C −40°C to +125°C −65°C to +150°C 300°C Package Type 5-Lead SC70 (KS-5) 5-Lead TSOT (UJ-5) 8-Lead SOIC (R-8) 1 Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. θJA1 376 230 130 θJC2 189 146 43 Unit °C/W °C/W °C/W θJA is specified for the worst-case conditions, that is, a device soldered in a circuit board for surface-mount packages. 2 θJC is the junction-to-case thermal resistance. ESD CAUTION Rev. S | Page 8 of 21 Data Sheet ADR01/ADR02/ADR03/ADR06 TYPICAL PERFORMANCE CHARACTERISTICS 3.002 10.010 3.001 10.000 VOUT (V) 9.995 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) 2.998 –40 –25 5.004 0.7 SUPPLY CURRENT (mA) VOUT (V) 0.8 5.000 4.996 20 35 50 65 80 95 110 125 TEMPERATURE (°C) SUPPLY CURRENT (mA) 0.7 2.500 2.499 20 35 50 65 80 95 TEMPERATURE (°C) 110 125 12 16 20 24 28 INPUT VOLTAGE (V) 110 125 32 36 36 Figure 5. ADR03 Typical VOUT vs. Temperature +125°C +25°C 0.6 –40°C 0.5 0.4 02747-006 VOUT (V) 2.501 5 95 Figure 7. ADR01 Supply Current vs. Input Voltage 0.8 –10 80 0.5 2.502 –25 65 +25°C Figure 4. ADR02 Typical VOUT vs. Temperature 2.498 –40 50 –40°C 02747-005 5 35 +125°C 0.6 0.4 –10 20 Figure 6. ADR06 Typical VOUT vs. Temperature 5.008 –25 5 TEMPERATURE (°C) Figure 3. ADR01 Typical VOUT vs. Temperature 4.992 –40 –10 02747-007 –10 02747-004 –25 02747-008 2.999 9.990 9.985 –40 3.000 02747-009 VOUT (V) 10.005 8 12 16 20 24 28 32 INPUT VOLTAGE (V) Figure 8. ADR02 Supply Current vs. Input Voltage Rev. S | Page 9 of 21 ADR01/ADR02/ADR03/ADR06 Data Sheet 0.85 50 IL = 0mA TO 5mA 0.80 40 LOAD REGULATION (ppm/mA) 0.70 +125°C 0.65 +25°C 0.60 –40°C 0.55 0.50 10 0 20 15 30 25 35 36 –20 85 25 125 Figure 12. ADR02 Load Regulation vs. Temperature 60 0.80 IL = 0mA TO 10mA 0.70 LOAD REGULATION (ppm/mA) 50 +125°C 0.65 +25°C 0.60 –40°C 0.55 0.50 0.45 10 20 15 25 30 35 36 INPUT VOLTAGE (V) 40 VIN = 36V 30 20 10 0 –40 02747-011 5 5 20 35 65 50 80 95 110 125 125 40 IL = 0mA TO 10mA 30 LOAD REGULATION (ppm/mA) VIN = 36V 20 10 0 VIN = 14V –10 –10 Figure 13. ADR03 Load Regulation vs. Temperature IL = 0mA TO 10mA 30 –25 TEMPERATURE (°C) Figure 10. ADR06 Supply Current vs. Input Voltage 40 VIN = 7V 02747-014 0.75 SUPPLY CURRENT (mA) 0 –40 TEMPERATURE (°C) Figure 9. ADR03 Supply Current vs. Input Voltage –20 VIN = 36V 20 10 0 VIN = 7V –10 –20 –30 –40 –40 0 25 50 85 TEMPERATURE (°C) 125 02747-012 LOAD REGULATION (ppm/mA) VIN = 8V 02747-013 10 02747-010 5 INPUT VOLTAGE (V) 0.40 VIN = 36V 20 –10 0.45 0.40 30 02747-015 SUPPLY CURRENT (mA) 0.75 Figure 11. ADR01 Load Regulation vs. Temperature –30 –40 –25 –10 5 20 35 50 65 80 95 110 TEMPERATURE (°C) Figure 14. ADR06 Load Regulation vs. Temperature Rev. S | Page 10 of 21 Data Sheet ADR01/ADR02/ADR03/ADR06 2 10 VIN = 14V TO 36V VIN = 6V TO 36V 8 LINE REGULATION (ppm/V) –2 –4 –6 –8 6 4 2 0 –10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) –4 –40 –25 –10 5 35 20 50 65 80 95 110 125 02747-019 –25 02747-016 –10 –40 10 02747-020 –2 10 02747-021 LINE REGULATION (ppm/V) 0 TEMPERATURE (°C) Figure 18. ADR06 Line Regulation vs. Temperature Figure 15. ADR01 Line Regulation vs. Temperature 5 8 4 DROPOUT VOLTAGE (V) 4 0 –4 –8 –40 3 +125°C 2 0 –25 –10 5 20 35 50 65 80 95 110 125 TEMPERATURE (°C) –40°C 1 02747-017 LINE REGULATION (ppm/V) VIN = 8V TO 36V +25°C 0 2 4 8 6 LOAD CURRENT (mA) Figure 19. ADR01 Dropout Voltage vs. Load Current Figure 16. ADR02 Line Regulation vs. Temperature 8 4 DROPOUT VOLTAGE (V) 2 0 –2 4 +125°C –40°C 2 +25°C –4 –40 –25 –10 5 20 35 50 65 80 95 110 TEMPERATURE (°C) 125 02747-018 LINE REGULATION (ppm/mV) VIN = 5V TO 36V 0 0 2 4 6 8 LOAD CURRENT (mA) Figure 20. ADR02 Dropout Voltage vs. Load Current Figure 17. ADR03 Line Regulation vs. Temperature Rev. S | Page 11 of 21 ADR01/ADR02/ADR03/ADR06 Data Sheet 6 4 0.5µV/DIV DROPOUT VOLTAGE (V) 5 +125°C 3 +25°C 2 –40°C 0 2 4 8 6 10 LOAD CURRENT (mA) TIME (1s/DIV) 02747-022 0 Figure 21. ADR03 Dropout Voltage vs. Load Current 02747-124 1 Figure 24. ADR01 Typical Noise Voltage, 0.1 Hz to 10.0 Hz 4.5 4.0 +125°C 3.0 +25°C 0.5µV/DIV 2.5 –40°C 2.0 1.5 1.0 0.5 0 2 4 6 8 10 LOAD CURRENT (mA) TIME (1s/DIV) 02747-023 0 02747-125 DROPOUT VOLTAGE (V) 3.5 Figure 25. ADR02 Typical Noise Voltage, 0.1 Hz to 10.0 Hz Figure 22. ADR06 Dropout Voltage vs. Load Current 0.70 0.5µV/DIV 0.65 0.60 0.50 0 2 4 6 8 LOAD CURRENT (mA) 10 Figure 23. ADR01 Quiescent Current vs. Load Current TIME (1s/DIV) Figure 26. ADR03 Typical Noise Voltage, 0.1 Hz to 10.0 Hz Rev. S | Page 12 of 21 02747-126 0.55 02747-024 QUIESCENT CURRENT (mA) TA = 25°C Data Sheet ADR01/ADR02/ADR03/ADR06 NO LOAD CAPACITOR VIN 5V/DIV 0.5µV/DIV LOAD OFF LOAD ON 02747-127 LOAD = 5mA TIME (1s/DIV) TIME (1ms/DIV) Figure 27. ADR06 Typical Noise Voltage, 0.1 Hz to 10.0 Hz 02747-028 VOUT 100mV/DIV Figure 30. ADR02 Load Transient Response CLOAD = 100nF VIN 5V/DIV 50µV/DIV LOAD OFF LOAD ON 02747-026 LOAD = 5mA TIME (1ms/DIV) Figure 28. ADR02 Typical Noise Voltage, 10 Hz to 10 kHz TIME (1ms/DIV) 02747-029 VOUT 100mV/DIV Figure 31. ADR02 Load Transient Response (CLOAD Means Load Capacitance) 10V 8V VIN 10V/DIV VOUT 5V/DIV CIN = 0.01µF NO LOAD CAPACITOR VOUT 5V/DIV TIME (4µs/DIV) Figure 29. ADR02 Line Transient Response 02747-030 TIME (2ms/DIV) 02747-027 NO LOAD CAPACITOR NO INPUT CAPACITOR Figure 32. ADR02 Turn-Off Response (CIN Means Input Capacitance) Rev. S | Page 13 of 21 ADR01/ADR02/ADR03/ADR06 Data Sheet CLOAD = 0.01µF NO INPUT CAPACITOR CIN = 0.01µF VIN 10V/DIV VOUT 5V/DIV VOUT 5V/DIV 02747-031 TIME (4µs/DIV) TIME (4µs/DIV) Figure 33. ADR02 Turn-On Response Figure 35. ADR02 Turn-Off with No Input Capacitor VIN 10V/DIV CLOAD = 0.01µF NO INPUT CAPACITOR 02747-032 VOUT 5V/DIV TIME (4µs/DIV) VIN 10V/DIV Figure 34. ADR02 Turn-Off with No Input Capacitor Rev. S | Page 14 of 21 02747-033 NO LOAD CAPACITOR Data Sheet ADR01/ADR02/ADR03/ADR06 TERMINOLOGY Dropout Voltage (VDO) Dropout voltage, sometimes referred to as supply voltage headroom or supply output voltage differential, is defined as the minimum voltage differential between the input and output necessary for the device to operate, such as VDO = (VIN − VOUT)min|IL = Constant Because the dropout voltage depends upon the current passing through the device, it is always specified for a given load current. Temperature Coefficient (TCVO) The temperature coefficient relates the change in output voltage to the change in ambient temperature of the device, as normalized by the output voltage at 25°C. TCVO is expressed in ppm/°C and is determined by the following equation: = TCVO VOUT (T2 ) − VOUT (T1 ) × 106 ppm/C VOUT (25C ) × (T2 − T1 ) ( ) where: VOUT(T2) is the output voltage at Temperature 2. VOUT(T1) is the output voltage at Temperature 1. VOUT(25°C) is the output voltage at 25°C. Output Voltage Hysteresis (ΔVOUT_HYS) Output voltage hysteresis represents the change in output voltage after the device is exposed to a specified temperature cycle. ΔVOUT_HYS can be expressed as either a shift in voltage or a difference in parts per million from the nominal output as follows: VOUT_HYS = VOUT(25°C) − VOUT_TC (V) = VOUT _ HYS VOUT (25C ) − VOUT _ TC VOUT (25C ) Thermal hysteresis occurs as a result of forces exhibited upon the internal die by its packaging. The effect is more pronounced in devices with smaller packages. Long-Term Stability (ΔVOUT_LTD) Long-term stability refers to the shift in output voltage at 25°C after 1000 hours of operation in a 25°C environment. ΔVOUT_LTD can also be expressed as either a shift in voltage or a difference in parts per million from the nominal output as follows: ΔVOUT_LTD = |VOUT(t1) − VOUT(t0)| (V) ∆V= OUT _ LTD VOUT (t1 ) − VOUT (t 0 ) × 106 ( ppm ) VOUT (t 0 ) where: VOUT(t1) is the VOUT at 25°C after 1000 hours of operation at 25°C. VOUT(t0) is the VOUT at 25°C at Time 0. Line Regulation Line regulation refers to the change in output voltage in response to a given change in input voltage and is expressed in either percent per volt, parts per million per volt, or microvolt per volt change in input voltage. This parameter accounts for the effects of self heating. Load Regulation Load regulation refers to the change in output voltage in response to a given change in load current and is expressed in either microvolts per milliampere, parts per million per milliampere, or ohms of dc output resistance. This parameter accounts for the effects of self heating. × 106 ( ppm ) where VOUT_TC is the output voltage after temperature cycling. Rev. S | Page 15 of 21 ADR01/ADR02/ADR03/ADR06 Data Sheet APPLICATIONS INFORMATION OVERVIEW Output Adjustment The ADR01/ADR02/ADR03/ADR06 are high precision, low drift 10.0 V, 5.0 V, 2.5 V, and 3.0 V, respectively, voltage references available in an ultracompact footprint. The 8-lead SOIC version of the devices is a drop-in replacement of the REF01/REF02/REF03 sockets with improved cost and performance. The ADR01/ADR02/ADR03/ADR06 trim terminal can adjust the output voltage over a nominal voltage. This feature allows a system designer to trim system errors by setting the reference to a voltage other than 10.0 V, 5.0 V, 2.5 V, or 3.0 V. For finer adjustment, add a series resistor of 470 kΩ. With the configuration shown in Figure 38, the ADR01 can adjust from 9.70 V to 10.05 V, the ADR02 can adjust from 4.95 V to 5.02 V, the ADR03 can adjust from 2.3 V to 2.8 V, and the ADR06 can adjust from 2.8 V to 3.3 V. Adjustment of the output does not significantly affect the temperature performance of the devices provided the temperature coefficients of the resistors are relatively low. U1 ADR01/ ADR02/ ADR03/ ADR06 VOUT VIN VIN C1 0.1µF VO C2 0.1µF TEMP TRIM GND 02747-035 Figure 36. Basic Configuration R1 The PTAT voltage is made available at the TEMP pin of the ADR01/ADR02/ADR03/ADR06. The TEMP pin has a stable 1.96 mV/°C temperature sensitivity such that users can estimate the temperature change of the devices by knowing the voltage change at the TEMP pin. Q8 Q7 Q2 Q1 R4 R3 R2 Q23 Q9 Q3 D1 Q10 D2 VO Q4 APPLYING THE ADR01/ADR02/ADR03/ADR06 Input and Output Capacitors D3 Although the ADR01/ADR02/ADR03/ADR06 are designed to function stably without any external components, connecting a 0.1 µF ceramic capacitor to the output is highly recommended to improve stability and filter out low level voltage noise. An additional 1 µF to 10 µF electrolytic, tantalum, or ceramic capacitor can be added in parallel to improve transient performance in response to sudden changes in load current. However, know that doing so increases the turn-on time of the devices. R12 C1 Q13 Q12 R13 R5 I1 R20 Q14 Q15 TEMP R27 R14 Q16 R32 R17 Connect an additional 0.1 µF ceramic capacitor in parallel to reduce supply noise. Mount both input and output capacitors as close to the pins of the devices as possible. Q17 Q20 R24 R41 R11 To improve transient response in applications where the supply voltage can fluctuate, connect a 1 µF to 10 µF electrolytic, tantalum or ceramic capacitor to the input. R6 R42 GND Figure 37. Simplified Schematic Diagram U1 VIN ADR01/ ADR02/ ADR03/ ADR06 VIN VO VOUT TEMP TRIM GND R1 470kΩ POT 10kΩ R2 1kΩ Figure 38. Optional Trim Adjustment Rev. S | Page 16 of 21 TRIM VBG 1× Q19 02747-036 2× Q18 VIN 02747-034 These devices are standard band gap references (see Figure 37). The band gap cell contains two NPN transistors (Q18 and Q19) that differ in emitter area by 2×. The difference in their voltage between base and emitter (VBE) produces a proportional-toabsolute temperature current (PTAT) in R14, and, when combined with the VBE of Q19, produces a band gap voltage, VBG, that is almost constant in temperature. With an internal op amp and the feedback network of R5 and R6, VOUT is set precisely at 10.0 V, 5.0 V, 2.5 V, and 3.0 V for the ADR01, ADR02, ADR03, and ADR06, respectively. Precision laser trimming of the resistors and other proprietary circuit techniques are used to further enhance the initial accuracy, temperature curvature, and drift performance of the ADR01/ ADR02/ADR03/ADR06. Data Sheet ADR01/ADR02/ADR03/ADR06 VIN Temperature Monitoring IIN As described at the end of the Overview section, the ADR01/ADR02/ADR03/ADR06 provide a TEMP output (Pin 1 in Figure 1 and Pin 3 in Figure 2) that varies linearly with temperature. This output can monitor the temperature change in the system. The TEMP voltage (VTEMP) is approximately 550 mV at 25°C, and the temperature sensitivity is approximately 1.96 mV/°C (see Figure 39). A voltage change of 39.2 mV at the TEMP pin corresponds to a 20°C change in temperature. VL IQ ≈ 0.6mA RL IL = ISET + IQ RSET = SETTING RESISTOR ISET = SETTING CURRENT IQ = QUIESCENT CURRENT RL = LOAD RESISTOR IL = LOAD CURRENT 0.70 0.65 VTEMP (V) ISET = (VOUT – VL)/RSET GND VIN = 15V SAMPLE SIZE = 5 Figure 41. Low Cost Current Source 0.60 PRECISION CURRENT SOURCE WITH ADJUSTABLE OUTPUT ΔVTEMP /ΔT ≈ 1.96mV/°C 0.55 0.50 –25 0 25 50 75 100 125 TEMPERATURE (°C) 02747-037 0.45 0.40 –50 RSET 02747-040 0.75 VOUT Figure 39. VTEMP vs. Temperature The TEMP function is provided as a convenience rather than a precise feature. Because the voltage at the TEMP node is acquired from the band gap core, current pulling from this pin has a significant effect on VOUT. Care must be taken to buffer the TEMP output with a suitable low bias current op amp, such as the LTC2058, ADA4077-1, or ADA4522-1, all of which result in less than a 100 μV change in ΔVOUT (see Figure 40). Without buffering, even tens of microamps drawn from the TEMP pin can cause VOUT to fall out of specification. Alternatively, a precision current source can be implemented with the circuit shown in Figure 42 using ADR02 as an example. By adding a mechanical or digital potentiometer, this circuit becomes an adjustable current source. If a digital potentiometer is used, the load current is simply the voltage across Terminal B to Terminal W of the digital potentiometer divided by RSET. IL = (VREF × D)/RSET (1) where D is the decimal equivalent of the digital potentiometer input code. U1 ADR02 +12V VIN VOUT TEMP TRIM GND 0V TO (5V + VL) B AD5201 +12V U1 VIN VTEMP 1.9mV/°C V+ ADA4522-1 VOUT 1kΩ V+ ADA4522-1 –5V TO VL V– VO –12V TEMP TRIM GND VL RL 1kΩ IL Figure 42. Programmable 0 mA to 5 mA Current Source V– To optimize the resolution of this circuit, use dual-supply op amps because the ground potential of ADR02 can swing from −5.0 V at zero scale to VL at full scale of the potentiometer setting. 02747-038 U2 VIN RSET U2 ADR01/ ADR02/ ADR03/ ADR06 15V W 100kΩ A 02747-041 0.80 ADR01/ ADR02/ ADR03/ ADR06 Figure 40. Temperature Monitoring LOW COST CURRENT SOURCE Unlike most references, the ADR01/ADR02/ADR03/ADR06 employ an NPN Darlington in which the quiescent current remains constant with respect to the load current, as shown in Figure 23. As a result, a current source can be configured as shown in Figure 41 where ISET = (VOUT − VL)/RSET. IL is simply the sum of ISET and IQ. Although simple, IQ varies typically from 0.55 mA to 0.65 mA, limiting this circuit to general-purpose applications. Rev. S | Page 17 of 21 ADR01/ADR02/ADR03/ADR06 Data Sheet PROGRAMMABLE 4 mA TO 20 mA CURRENT TRANSMITTER ZO  Because of their precision, adequate current handling and small footprint, the devices are suitable as the reference sources for many high performance converter circuits. One of these applications is a multichannel 16-bit, 4 mA to 20 mA current transmitter in the industrial control market (see Figure 43). This circuit employs a Howland current pump at the output to yield better efficiency, a lower component count, and a higher voltage compliance than the conventional design with op amps and MOSFETs. In this circuit, if the resistors are matched such that R1 = R1, R2 = R2, and R3 = R3, the load current is In this circuit, the ADR01 provides the stable 10.000 V reference for the AD5544 quad 16-bit DAC. The resolution of the adjustable current is 0.3 μA/step, and the total worst-case INL error is merely 4 LSBs. Such error is equivalent to 1.2 μA or a 0.006% system error, which is well below the requirements of most systems. The result is shown in Figure 44 with measurement taken at 25°C and 70°C and a total system error of 4 LSBs at both 25°C and 70°C. 5 RL = 500Ω IL = 0mA TO 20mA (2) 4 where: D is similarly the decimal equivalent of the DAC input code. N is the number of bits of the DAC. INL (LSB) 3 According to Equation 2, R3 can set the sensitivity. Make R3 as small as necessary to achieve the current needed within the U4 output current driving capability. Alternatively, keep other resistors high to conserve power. 2 0 –1 0 8192 16384 0V TO –10V VIN VOUT TEMP TRIM RF IO 10V V REF AD5544 IO GND +15V U3 VX 49152 57344 65536 A precision voltage output with boosted current capability can be realized with the circuit shown in Figure 45. In this circuit, U2 forces VOUT to be equal to VREF by regulating the turn-on of N1, thereby making the load current furnished by VIN. In this configuration, a 50 mA load is achievable at VIN of 15.0 V. Moderate heat generates on the MOSFET, and higher current is achieved with a replacement of a larger device. In addition, for a heavy capacitive load with a fast edging input signal, add a buffer at the output to enhance the transient response. C1 –15V AD8512 U4 R2' 15kΩ R1' 150kΩ PRECISION BOOSTED OUTPUT REGULATOR VP 10pF U1 = ADR01 U2 = AD5543/AD5544/AD5554 U3, U4 = AD8512 40960 Figure 44. Result of Programmable 4 mA to 20 mA Current Transmitter R2 15kΩ R1 150kΩ GND DIGITAL INPUT CODE 20%–100% FULL SCALE 32768 VN R3 50Ω VO R3' 50Ω VL LOAD 500Ω 4mA TO 20mA N1 VIN Figure 43. Programmable 4 mA to 20 mA Transmitter The Howland current pump yields a potentially infinite output impedance, that is highly desirable, but resistance matching is critical in this application. The output impedance can be determined using Equation 3. As shown by this equation, if the resistors are perfectly matched, ZO is infinite. Alternatively, if the resistors are not matched, ZO is either positive or negative. If the latter is true, oscillation can occur. For this reason, connect Capacitor C1 in the range of 1 pF to 10 pF between VP and the output terminal of U4 to filter any oscillation. Rev. S | Page 18 of 21 U1 ADR01/ ADR02/ ADR03/ ADR06 VIN VOUT TEMP TRIM GND 2N7002 RL 200Ω CL 1µF VOUT 15V R1 100Ω R2 100Ω V+ ADA4522-1 V– U2 C1 1000pF Figure 45. Precision Boosted Output Regulator 02747-044 15V U2 VDD 24576 CODE (Decimal) 02747-042 5V 25°C 70°C 1 In this circuit, the AD8512 is capable of delivering 20 mA of current, and the voltage compliance approaches 15.0 V. U1 (3) 02747-043 (R2  R3) R1 VREF  D IL   2N R3 Vt R1  I t  R1 R2   1   R1R2  Data Sheet ADR01/ADR02/ADR03/ADR06 OUTLINE DIMENSIONS 2.20 2.00 1.80 1.35 1.25 1.15 5 2.40 2.10 1.80 4 1 3 2 0.65 BSC 1.10 0.80 0.10 MAX COPLANARITY 0.10 SEATING PLANE 0.30 0.15 0.40 0.10 0.46 0.36 0.26 0.22 0.08 072809-A 1.00 0.90 0.70 COMPLIANT TO JEDEC STANDARDS MO-203-AA Figure 46. 5-Lead Thin Shrink Small Outline Transistor Package [SC70] (KS-5) Dimensions shown in millimeters 3.05 2.90 2.75 TOP VIEW 1.75 1.60 1.45 5 4 1 2 3.05 2.80 2.55 3 0.95 BSC 1.90 REF SIDE VIEW END VIEW 1.00 MAX 8° 4° 0° SEATING PLANE 0.50 0.30 0.60 0.45 0.30 COMPLIANT TO JEDEC STANDARDS MO-193-AB Figure 47. 5-Lead Thin Small Outline Transistor Package [TSOT] (UJ-5) Dimensions shown in millimeters 5.00 (0.1968) 4.80 (0.1890) 4.00 (0.1574) 3.80 (0.1497) 8 1 5 4 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) COPLANARITY 0.10 SEATING PLANE 6.20 (0.2441) 5.80 (0.2284) 1.75 (0.0688) 1.35 (0.0532) 0.51 (0.0201) 0.31 (0.0122) 0.50 (0.0196) 0.25 (0.0099) 45° 8° 0° 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) COMPLIANT TO JEDEC STANDARDS MS-012-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. Figure 48. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) Rev. S | Page 19 of 21 012407-A PKG-000882 0.10 MAX 0.20 0.08 04-05-2017-B 0.90 0.70 ADR01/ADR02/ADR03/ADR06 Data Sheet ORDERING GUIDES ADR01 Ordering Guide Initial Accuracy Model 1, 2 ADR01ARZ ADR01ARZ-REEL7 ADR01BRZ ADR01BRZ-REEL7 ADR01WARZ-R7 ADR01WARZ-RL ADR01AUJZ-REEL7 ADR01BUJZ-REEL7 ADR01AKSZ-REEL7 ADR01BKSZ-REEL7 1 2 VOUT (V) 10 10 10 10 10 10 10 10 10 10 (mV) 10 10 5 5 14 14 10 5 10 5 (%) 0.1 0.1 0.05 0.05 0.14 0.14 0.1 0.05 0.1 0.05 Temperature Coefficient (ppm/°C) 10 10 3 3 10 10 25 9 25 9 Temperature Range −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C Package Description 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 5-Lead TSOT 5-Lead TSOT 5-Lead SC70 5-Lead SC70 Package Option R-8 R-8 R-8 R-8 R-8 R-8 UJ-5 UJ-5 KS-5 KS-5 Ordering Quantity 98 1,000 98 1000 1,000 2,500 3,000 3,000 3,000 3,000 Temperature Coefficient (ppm/°C) 10 10 10 10 10 3 3 25 9 25 9 Temperature Range −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C Package Description 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 5-Lead TSOT 5-Lead TSOT 5-Lead SC70 5-Lead SC70 Package Option R-8 R-8 R-8 R-8 R-8 R-8 R-8 UJ-5 UJ-5 KS-5 KS-5 Ordering Quantity 98 2,500 1,000 2,500 1,000 98 1,000 3,000 3,000 3,000 3,000 Marking Code R1E R1F R1E R1F Z = RoHS Compliant Part. W = Qualified for automotive applications. ADR02 Ordering Guide Initial Accuracy Model 1, 2 ADR02ARZ ADR02ARZ-REEL ADR02ARZ-REEL7 ADR02WARZ-REEL ADR02WARZ-REEL7 ADR02BRZ ADR02BRZ-REEL7 ADR02AUJZ-REEL7 ADR02BUJZ-REEL7 ADR02AKSZ-REEL7 ADR02BKSZ-REEL7 1 2 VOUT (V) 5 5 5 5 5 5 5 5 5 5 5 (mV) 5 5 5 5 5 3 3 5 3 5 3 (%) 0.1 0.1 0.1 0.1 0.1 0.06 0.06 0.1 0.06 0.1 0.06 Z = RoHS Compliant Part. W = Qualified for automotive applications. Rev. S | Page 20 of 21 Marking Code R1G R1H R1G R1H Data Sheet ADR01/ADR02/ADR03/ADR06 ADR03 Ordering Guide Initial Accuracy Model 1, 2 ADR03ARZ ADR03ARZ-REEL7 ADR03WARZ-R7 ADR03WARZ-RL ADR03BRZ ADR03BRZ-REEL7 ADR03AUJZ-REEL7 ADR03BUJZ-REEL7 ADR03AKSZ-REEL7 ADR03BKSZ-REEL7 1 2 VOUT (V) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 (mV) 5 5 5 5 2.5 2.5 5 2.5 5 2.5 (%) 0.2 0.2 0.2 0.2 0.1 0.1 0.2 0.1 0.2 0.1 Temperature Coefficient (ppm/°C) 10 10 10 10 3 3 25 9 25 9 Temperature Range −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C Package Description 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 5-Lead TSOT 5-Lead TSOT 5-Lead SC70 5-Lead SC70 Package Option R-8 R-8 R-8 R-8 R-8 R-8 UJ-5 UJ-5 KS-5 KS-5 Ordering Quantity 98 1,000 1,000 2500 98 1,000 3,000 3,000 3,000 3,000 Marking Code Temperature Coefficient (ppm/°C) 10 10 10 10 3 3 9 25 9 Temperature Range −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C Package Description 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 5-Lead TSOT 5-Lead SC70 5-Lead SC70 Package Option R-8 R-8 R-8 R-8 R-8 R-8 UJ-5 KS-5 KS-5 Ordering Quantity 98 1,000 1,000 2500 98 1,000 3,000 3,000 3,000 Marking Code R1J R1K R1J R1K Z = RoHS Compliant Part. W = Qualified for automotive applications. ADR06 Ordering Guide Initial Accuracy Model 1, 2 ADR06ARZ ADR06ARZ-REEL7 ADR06WARZ-R7 ADR06WARZ-RL ADR06BRZ ADR06BRZ-REEL7 ADR06BUJZ-REEL7 ADR06AKSZ-REEL7 ADR06BKSZ-REEL7 1 2 VOUT (V) 3 3 3 3 3 3 3 3 3 (mV) 6 6 6 6 3 3 3 6 3 (%) 0.2 0.2 0.2 0.2 0.1 0.1 0.1 0.2 0.1 R1M R1L R1M Z = RoHS Compliant Part. W = Qualified for automotive applications. AUTOMOTIVE PRODUCTS The ADR01W, ADR02W, ADR03W and ADR06W models are available with controlled manufacturing to support the quality and reliability requirements of automotive applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to obtain the specific Automotive Reliability reports for these models. ©2002–2019 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D02747-0-12/19(S) Rev. S | Page 21 of 21