ADRF5019BCPZN-R7

Silicon, SPDT Switch, Nonreflective, 100 MHz to 13 GHz ADRF5019 Data Sheet 50Ω ADRF5019 12 VDD GND 2 11 LS RFC 3 10 VCTRL RF2 7 GND 6 GND 8 50Ω GND 4 9 VSS PACKAGE BASE GND 21247-001 GND 1 13 GND 14 RF1 15 GND 16 GND FUNCTIONAL BLOCK DIAGRAM Nonreflective 50 Ω design Low insertion loss: 0.8 dB at 8 GHz High isolation: 45 dB at 8 GHz High input linearity P1dB: 39 dBm IP3: 60 dBm typical High power handling 35 dBm insertion loss path 27 dBm hot switching ESD rating: 2 kV (Class 2) HBM No low frequency spurious 0.05 dB RF settling time: 375 ns 0.1 dB RF settling time: 300 ns 16-lead, 3 mm × 3 mm LFCSP Pin-compatible with HMC1118, low frequency cutoff version GND 5 FEATURES Figure 1. APPLICATIONS Test instrumentation Microwave radios and very small aperture terminals (VSATs) Military radios, radars, and electronic counter measures (ECMs) Fiber optics and broadband telecommunications GENERAL DESCRIPTION The ADRF5019 is a nonreflective, single pole, double throw (SPDT) RF switch manufactured in a silicon process. The ADRF5019 operates from 100 MHz to 13 GHz with better than 0.8 dB insertion loss and 45 dB of isolation at 8 GHz. The ADRF5019 has a nonreflective design, and the RF ports are internally terminated to 50 Ω. The ADRF5019 switch requires a dual supply voltage of +3.3 V and −2.5 V and positive control voltage inputs. This switch employs complementary metal-oxide semiconductor (CMOS)compatible and low voltage transistor transistor logic (LVTTL)compatible controls. Rev. 0 The ADRF5019 can also operate with a single positive supply voltage (VDD) applied. The negative supply voltage (VSS) is tied to ground. Even in single-supply operation mode, the ADRF5019 can cover the 100 MHz to 13 GHz operating frequency and maintain good power handling performance. See the Applications Information section for more details. The ADRF5019 is pin-compatible with the HMC1118, the low frequency cutoff version, which operates from 9 kHz to 13.0 GHz. The ADRF5019 comes in a 16-lead, lead frame chip scale package (LFCSP) and operates from −40°C to +105°C. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2019 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADRF5019 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1  Typical Performance Characterics ..................................................7  Applications ....................................................................................... 1  Insertion Loss, Return Loss, and Isolation ................................7  Functional Block Diagram .............................................................. 1  Input Compression and Input Third-Order Intercept .............8  General Description ......................................................................... 1  Theory of Operation ...................................................................... 10  Revision History ............................................................................... 2  RF Input and Output ................................................................. 10  Specifications..................................................................................... 3  Power Supply............................................................................... 10  Electrical Specifications ............................................................... 3  Applications Information .............................................................. 11  Absolute Maximum Ratings............................................................ 5  Layout Considerations ............................................................... 11  Thermal Resistance ...................................................................... 5  Board Layout ............................................................................... 11  Power Derating Curves ................................................................ 5  RF and Digital Controls ............................................................ 11  ESD Caution .................................................................................. 5  Outline Dimensions ....................................................................... 12  Pin Configuration and Function Descriptions ............................. 6  Ordering Guide .......................................................................... 12  Interface Schematics..................................................................... 6  REVISION HISTORY 8/2019—Revision 0: Initial Version Rev. 0 | Page 2 of 12 Data Sheet ADRF5019 SPECIFICATIONS ELECTRICAL SPECIFICATIONS VDD = 3.3 V, VSS = −2.5 V, LS = 3.3 V, VCTRL = 0 V or 3.3 V, and TCASE = 25°C in a 50 Ω system, unless otherwise noted. Table 1. Parameter FREQUENCY RANGE INSERTION LOSS Between RFC and RF1 or RFC and RF2 (On) Symbol f IL RETURN LOSS Between RFC and RF1 or RFC and RF2 (On) RL RF1 or RF2 (Off ) ISOLATION Between RFC and RF1 or RCF and RF2 (Off) SWITCHING CHARACTERISTICS Dual Supply Rise Time and Fall Time On Time and Off Time RF Settling Time 0.1 dB 0.05 dB Single Supply Rise Time and Fall Time On Time and Off Time INPUT LINEARITY 1 Dual Supply Input Compression 0.1 dB 1 dB Intermodulation Distortion Input Third-Order Intercept Single Supply Input Compression 0.1 dB 1 dB Intermodulation Distortion Input Third-Order Intercept SUPPLY CURRENT Positive Supply Current Negative Supply Current tRISE, tFALL tON, tOFF tRISE, tFALL tON, tOFF Test Conditions/Comments Max 13,000 Unit MHz 0.6 0.8 1.0 1.5 dB dB dB dB 100 MHz to 3 GHz 100 MHz to 8 GHz 100 MHz to 13 GHz 100 MHz to 3 GHz 100 MHz to 8 GHz 100 MHz to 13 GHz 26 22 9 26 14 5 dB dB dB dB dB dB 100 MHz to 3 GHz 100 MHz to 8 GHz 100 MHz to 10 GHz 100 MHz to 13 GHz 50 45 35 25 dB dB dB dB VDD = 3.3 V, VSS = −2.5 V 10% to 90% of RF output 50% of triggered digital control input voltage (VCTL) to 90% of RF output 35 150 ns ns 300 375 ns ns 180 285 ns ns 38 39 dBm dBm 60 dBm 25 28 dBm dBm 55 dBm 20 0.5 µA µA 50% of triggered VCTL to 0.1 dB of final RF output 50% of triggered VCTL to 0.05 dB of final RF output VDD = 3.3 V, VSS = 0 V 10% to 90% of RF output 50% of triggered VCTL to 90% of RF output 100 MHz to 13 GHz VDD = 3.3 V, VSS = −2.5 V Two tone input power = 12 dBm each tone, Δf = 1 MHz VDD = 3.3 V, VSS = 0 V P0.1dB P1dB IIP3 Typ 100 MHz to 3 GHz 100 MHz to 8 GHz 100 MHz to 10 GHz 100 MHz to 13 GHz P0.1dB P1dB IIP3 Min 100 Two tone input power = 12 dBm each tone, Δf = 1 MHz VDD pin and VSS pin IDD ISS Rev. 0 | Page 3 of 12 ADRF5019 Parameter DIGITAL CONTROL INPUTS Voltage Low High Current Low and High Current RECOMMENDED OPERATING CONDITONS Supply Voltage Positive Negative Digital Control Input Voltage RF Input Power, Dual Supply 2 Insertion Loss Path Data Sheet Symbol VINL VINH VDD VSS VCTL PIN PIN Isolation Path Hot Switching Case Temperature Min Typ 0 2 IINL, IINH Isolation Path Hot Switching RF Input Power, Single Supply2 Insertion Loss Path Test Conditions/Comments VCTRL pin and LS pin Max Unit 0.8 3.3 V V