Low Cost JFET Input Operational Amplifiers ADTL082/ADTL084
FEATURES
TL082/TL084 compatible Low input bias current: 10 pA maximum Offset voltage 5.5 mV maximum (ADTL082A/ADTL084A) 9 mV maximum (ADTL082J/ADTL084J) ±15 V operation Low noise: 16 nV/√Hz Wide bandwidth: 5 MHz Slew rate: 20 V/μs CMRR: 80 dB minimum Total harmonic distortion: 0.001% Supply current: 1.2 mA typical Unity-gain stable
PIN CONFIGURATIONS
OUT A 1 –IN A 2 +IN A 3 –V 4
8
+V OUT B +IN B
06275-001
ADTL082J
TOP VIEW (Not to Scale)
7 6 5
–IN B
Figure 1. 8-Lead SOIC_N (R-8)
OUT A 1 –IN A 2 +IN A 3 –V 4
8
ADTL082A
TOP VIEW (Not to Scale)
+V OUT B +IN B
06275-002 06275-004
7 6 5
–IN B
Figure 2. 8-Lead MSOP (RM-8)
OUT A 1 –IN A 2 +IN A 3 +V 4
14 13
OUT D –IN D +IN D
APPLICATIONS
General-purpose amplification Power control and monitoring Active filters Industrial/process control Data acquisition Sample and hold circuits Integrators Input buffering
ADTL084J
12
TOP VIEW 11 –V (Not to Scale) 10 +IN C +IN B 5 OUT B 7
8
OUT C
Figure 3. 14-Lead SOIC_N (R-14)
OUT A 1 –IN A 2 +IN A 3 +V 4 +IN B 5 –IN B 6 OUT B 7
14 13
OUT D –IN D +IN D –V +IN C –IN C OUT C
ADTL084A
TOP VIEW (Not to Scale)
12 11 10 9 8
Figure 4. 14-Lead TSSOP (RU-14)
GENERAL DESCRIPTION
The ADTL082 and ADTL084 are JFET input amplifiers that provide industry-leading performance over TL08x devices. The ADTL082A and ADTL084A are improved versions of TL08x A, I, and Q grades. The ADTL082J and ADTL084J are industry alternatives to the TL08x standard and C grades. The ADTL08x family offers lower noise, offset voltage, offset drift over temperature, and bias current over the TL08x. In addition, the ADLT08x family has better common-mode rejection and slew rates. These op amps are ideal for various applications, including process control, industrial and instrumentation equipment, active filtering, data conversion, buffering, and power control and monitoring. The A grade amplifiers are available in lead-free packaging. The standard grade amplifiers are available in both leaded and leadfree packaging. The ADTL082A and ADTL084A are specified over the extended industrial (−40°C to +125°C) temperature range. The ADTL082J and ADTL084J are specified over the commercial (0°C to 70°C) temperature range.
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©2007 Analog Devices, Inc. All rights reserved.
06275-003
–IN B 6
9
–IN C
ADTL082/ADTL084 TABLE OF CONTENTS
Features .............................................................................................. 1 Applications....................................................................................... 1 Pin Configurations ........................................................................... 1 General Description ......................................................................... 1 Revision History ............................................................................... 2 Specifications..................................................................................... 3 Absolute Maximum Ratings............................................................ 4 Thermal Resistance .......................................................................4 Power Sequencing .........................................................................4 ESD Caution...................................................................................4 Typical Performance Characteristics ..............................................5 Outline Dimensions ..........................................................................8 Ordering Guide .......................................................................... 10
REVISION HISTORY
11/07—Rev. A to Rev. B Changes to Ordering Guide .......................................................... 10 4/07—Rev. 0 to Rev. A Changes to Table 1............................................................................ 3 1/07—Revision 0: Initial Version
Rev. B | Page 2 of 12
ADTL082/ADTL084 SPECIFICATIONS
VCC = ±15 V, VCM = 0 V, TA = 25°C, over all grades, unless otherwise noted. Table 1.
Parameter INPUT CHARACTERISTICS Offset Voltage Symbol VOS 0°C ≤ TA ≤ +70°C −40°C ≤ TA ≤ +125°C 0°C ≤ TA ≤ +70°C −40°C ≤ TA ≤ +125°C 0°C ≤ TA ≤ +70°C −40°C ≤ TA ≤ +125°C Input Offset Current IOS 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C Input Voltage Range Common-Mode Rejection Ratio Input Impedance Large Signal Voltage Gain VCM CMRR RIN AVO VCM = −11 V to +15 V RL = 2 kΩ, VO = −10 V to +10 V 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C RL = 10 kΩ 0°C ≤ TA ≤ +70°C −40°C ≤ TA ≤ +125°C RL = 2 kΩ 0°C ≤ TA ≤ +70°C −40°C ≤ TA ≤ +125°C −11 80 100 90 86 1012 200 200 2 Conditions Min J Grade Typ Max 2 9 10 Min A Grade Typ Max 1.5 5.5 8 9 Unit mV mV mV μV/°C μV/°C pA nA nA pA nA nA V dB Ω V/mV V/mV V/mV V V V V V V mA dB mA mA mA V/μs MHz Degrees % dB nV/√Hz
Offset Voltage Drift Input Bias Current
ΔVOS/ΔT IB
15 2 100 3 100 3 +15 −11 80 100 90 50 ±13 ±13 ±13 ±12.5 ±12 ±12 10 2 100 3 5 100 3 5 +15
2
86 1012 200 200 200 ±13.5
OUTPUT CHARACTERISTICS Maximum Output Voltage Swing
VO
±12 ±12
±13.5
±13.3
±10 ±27
Short-Circuit Output Current POWER SUPPLY Power Supply Rejection Ratio Supply Current per Amplifier
ISC PSRR ISY VDD = 8 V to 36 V 0°C ≤ TA ≤ +70°C −40°C ≤ TA ≤ +125°C 80
±27 80 1.8 1.9 86 1.2
86 1.2
1.8 1.9 2.0
DYNAMIC PERFORMANCE Slew Rate Gain Bandwidth Product Phase Margin Total Harmonic Distortion Channel Separation NOISE PERFORMANCE Voltage Noise Density
SR GBP φM THD CS en
VIN = 6 V rms, f = 1 kHz, AV = +1, RL = 2 kΩ f = 10 kHz f = 1 kHz
20 5 63 0.001 120 16
20 5 63 0.001 120 16
Rev. B | Page 3 of 12
ADTL082/ADTL084 ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter Supply Voltage Input Voltage Differential Input Voltage Output Short Circuit to GND Storage Temperature Range Operating Temperature Range Lead Temperature (Soldering 60 sec) Junction Temperature Rating ±18 V or +36 V ±V supply ±V supply Indefinite −65°C to +150°C −40°C to +125°C 300°C 150°C
THERMAL RESISTANCE
Table 3. Thermal Resistance
Package Type 8-Lead SOIC_N (R-8) 8-Lead MSOP (RM-8) 14-Lead SOIC_N (R-14) 14-Lead TSSOP (RU-14) θJA 158 210 120 180 θJC 43 45 36 35 Unit °C/W °C/W °C/W °C/W
POWER SEQUENCING
The op amp supplies must be established simultaneously with, or before, the application of any input signals. If this is not possible, the input current must be limited to 10 mA.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
ESD CAUTION
Rev. B | Page 4 of 12
ADTL082/ADTL084 TYPICAL PERFORMANCE CHARACTERISTICS
16
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
14 12 10 8 6 4 2
VSY = ±15V
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
RL = 2kΩ TA = 25°C
16 14 12 10 8 6 4 2 0 –75 VSY = ±15V RL = 10kΩ RL = 2kΩ
VSY = ±10V
VSY = ±5V
06275-005
1k
10k
100k
1M
10M
–50
–25
0
25
50
75
100
125
FREQUENCY (Hz)
TA FREE-AIR TEMPERATURE (°C)
Figure 5. Maximum Peak Output Voltage vs. Frequency
Figure 8. Maximum Peak Output Voltage vs. Free-Air Temperature
16
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
14 12 10 8 6 4 2
VSY = ±15V
RL = 10kΩ TA = 25°C
16 14 12 10 8 6 4 2
06275-009
VSY = ±15V TA = 25°C
VSY = ±10V
VSY = ±5V
06275-006
0 100
1k
10k
100k
1M
10M
0 100
1k RL LOAD RESISTANCE (Ω)
10k
FREQUENCY (Hz)
Figure 6. Maximum Peak Output Voltage vs. Frequency
Figure 9. Maximum Peak Output Voltage vs. Load Resistance
16
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
16
14 12 10 8 6 4 2
TA = –55°C
VSY = ±15V RL = 2kΩ
VOM MAXIMUM PEAK OUTPUT VOLTAGE (±V)
14 12 10 8 6 4 2 0
RL = 10Ω TA = 25°C
TA = +25°C
06275-007
100k FREQUENCY (Hz)
1M
10M
±4
±5
±6
±7
±8
±9
±10
±11 ±12
±13 ±14
±15
VSY SUPPLY VOLTAGE (V)
Figure 7. Maximum Peak Output Voltage vs. Frequency
Figure 10. Maximum Peak Output Voltage vs. Supply Voltage
Rev. B | Page 5 of 12
06275-010
0 10k
TA = +125°C
06275-008
0 100
ADTL082/ADTL084
1k
100
PD TOTAL POWER DISSIPATION (mW)
AVD LARGE SIGNAL DIFFERENTIAL VOLTAGE AMPLIFICATION (V/mV)
VSY = ±15V NO SIGNAL NO LOAD
80
100
60
40
10 VSY = ±15V VO = ±10V RL = 2kΩ
06275-011
20
–50
–25
0
25
50
75
100
125
–50
–25
0
25
50
75
100
125
TA FREE-AIR TEMPERATURE (°C)
TA FREE-AIR TEMPERATURE (°C)
Figure 11. Large Signal Differential Voltage Amplification vs. Free-Air Temperature
1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 –75 VSY = ±15V NO SIGNAL NO LOAD
06275-012
Figure 14. Total Power Dissipation vs. Free-Air Temperature
4 VSY = ±15V
IB INPUT BIAS CURRENT (nA)
3
ISY SUPPLY CURRENT (mA)
2
1
0
–50
–25
0
25
50
75
100
125
–35
–15
5
25
45
65
85
105
125
TA FREE-AIR TEMPERATURE (°C)
TA FREE-AIR TEMPERATURE (°C)
Figure 12. Supply Current Per Amplifier vs. Free-Air Temperature
Figure 15. Input Bias Current vs. Free-Air Temperature
2.0 1.8 1.6
ISY SUPPLY CURRENT (mA)
10.0
TA = 25°C NO SIGNAL NO LOAD
IB INPUT BIAS CURRENT (nA)
VSY = ±15V
1.0
1.4 1.2 1.0 0.8 0.6 0.4 0.2
06275-013
0.1
0.01
±5
±6
±7
±8
±9
±10
±11
±12
±13
±14
±15
–35
–15
5
25
45
65
85
105
125
VSY SUPPLY VOLTAGE (V)
TA FREE-AIR TEMPERATURE (°C)
Figure 13. Supply Current vs. Supply Voltage
Figure 16. Input Bias Current vs. Free-Air Temperature
Rev. B | Page 6 of 12
06275-016
0 ±4
0.001 –55
06275-015
–1 –55
06275-014
1 –75
0 –75
ADTL082/ADTL084
6
VN EQUIVALENT INPUT NOISE VOLTAGE (nV/√Hz)
90
VSY = ±15V RL = 2kΩ CL = 100pF TA = 25°C
80 70 60 50 40 30 20 10 1 10 100 FREQUENCY (Hz) 1k
INPUT AND OUTPUT VOLTAGE (V)
4 OUTPUT 2
VSY = ±15V AV = 1k TA = 25°C
0
–2 INPUT –4
06275-017
0
2
4 TIME (µs)
6
8
10
10k
Figure 17. Large Signal Response
Figure 20. Voltage Noise Density vs. Frequency
0.15 THD TOTAL HARMONIC DISTORTION (%)
1 VSY = ±15V AV = 1 Vi (rms) = 6V 0.1 TA = 25°C
0.10
VO OUTPUT VOLTAGE (V)
0.05
0 VSY = ±15V RL = 2kΩ CL = 100pF TA = 25°C
0.01
–0.05
0.001
–0.10
06275-018
0
0.2
0.4
0.6
0.8
1.0
1.2
100
1000 FREQUENCY (Hz)
10000
100000
ELAPSED TIME (µs)
Figure 18. Small Signal Response
Figure 21. Total Harmonic Distortion vs. Frequency
CMRR COMMON MODE REJECTION RATIO (dB)
95 VSY = ±15V 94
93
92
91
90
–35
–15
5
25
45
65
85
105
125
TA FREE-AIR TEMPERATURE (°C)
Figure 19. Common-Mode Rejection Ratio vs. Free-Air Temperature
06275-019
89 –55
Rev. B | Page 7 of 12
06275-021
–0.15 –0.2
0.0001 10
06275-020
–6 –2
0
ADTL082/ADTL084 OUTLINE DIMENSIONS
5.00 (0.1968) 4.80 (0.1890) 4.00 (0.1574) 3.80 (0.1497)
8 1 5 4
6.20 (0.2441) 5.80 (0.2284)
1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) COPLANARITY 0.10 SEATING PLANE
1.75 (0.0688) 1.35 (0.0532)
0.50 (0.0196) 0.25 (0.0099) 8° 0° 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157)
45°
0.51 (0.0201) 0.31 (0.0122)
COMPLIANT TO JEDEC STANDARDS MS-012-A A CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 22. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches)
3.20 3.00 2.80
3.20 3.00 2.80 PIN 1
8
5
1
5.15 4.90 4.65
4
0.65 BSC 0.95 0.85 0.75 0.15 0.00 0.38 0.22 SEATING PLANE 1.10 MAX 8° 0° 0.80 0.60 0.40
0.23 0.08
COPLANARITY 0.10
COMPLIANT TO JEDEC STANDARDS MO-187-AA
Figure 23. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters
Rev. B | Page 8 of 12
012407-A
ADTL082/ADTL084
8.75 (0.3445) 8.55 (0.3366)
14 1 8 7
4.00 (0.1575) 3.80 (0.1496)
6.20 (0.2441) 5.80 (0.2283)
1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0039) COPLANARITY 0.10 0.51 (0.0201) 0.31 (0.0122)
1.75 (0.0689) 1.35 (0.0531) SEATING PLANE
0.50 (0.0197) 0.25 (0.0098) 8° 0° 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157)
45°
COMPLIANT TO JEDEC STANDARDS MS-012-AB CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 24. 14-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-14) Dimensions shown in millimeters and (inches)
5.10 5.00 4.90
14
8
4.50 4.40 4.30
1 7
6.40 BSC
PIN 1 1.05 1.00 0.80 0.65 BSC 1.20 MAX 0.15 0.05 0.30 0.19
0.20 0.09
SEATING COPLANARITY PLANE 0.10
8° 0°
0.75 0.60 0.45
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Figure 25. 14-Lead Thin Shrink Small Outline Package [TSSOP] (RU-14) Dimensions shown in millimeters
Rev. B | Page 9 of 12
060606-A
ADTL082/ADTL084
ORDERING GUIDE
Model ADTL082JR ADTL082JR-REEL ADTL082JR-REEL7 ADTL082JRZ 1 ADTL082JRZ-REEL1 ADTL082JRZ-REEL71 ADTL082ARZ1 ADTL082ARZ-REEL1 ADTL082ARZ-REEL71 ADTL082ARMZ-R21 ADTL082ARMZ-REEL1 ADTL084JR ADTL084JR-REEL ADTL084JR-REEL7 ADTL084JRZ1 ADTL084JRZ-REEL1 ADTL084JRZ-REEL71 ADTL084ARZ1 ADTL084ARZ-REEL1 ADTL084ARZ-REEL71 ADTL084ARUZ1 ADTL084ARUZ-REEL1
1
Temperature Range 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C 0°C to +70°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C
Package Description 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead MSOP 8-Lead MSOP 14-Lead SOIC_N 14-Lead SOIC_N 14-Lead SOIC_N 14-Lead SOIC_N 14-Lead SOIC_N 14-Lead SOIC_N 14-Lead SOIC_N 14-Lead SOIC_N 14-Lead SOIC_N 14-lead TSSOP 14-lead TSSOP
Package Option R-8 R-8 R-8 R-8 R-8 R-8 R-8 R-8 R-8 RM-8 RM-8 R-14 R-14 R-14 R-14 R-14 R-14 R-14 R-14 R-14 RU-14 RU-14
Branding
A18 A18
Z = RoHS Compliant Part.
Rev. B | Page 10 of 12
ADTL082/ADTL084 NOTES
Rev. B | Page 11 of 12
ADTL082/ADTL084 NOTES
©2007 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D06275-0-11/07(B)
Rev. B | Page 12 of 12
很抱歉,暂时无法提供与“ADTL084ARUZ”相匹配的价格&库存,您可以联系我们找货
免费人工找货