ADV8003KBCZ-8B

NatureVue™ Video Signal Processor with Bitmap OSD, Dual HDMI Tx, and Encoder ADV8003 Data Sheet FEATURES HDMI transmitters Dual HDMI transmitters enabling splitter capability Content type bits CEC 1.4 controller Audio return channel (ARC) support Support of standard S/PDIF for stereo LPCM compressed audio up to 192 kHz 6-channel uncompressed LPCM I2S audio up to 192 kHz 6-channel direct stream digital (DSD) audio inputs Noise shaped video (NSV) six-DAC video encoder Six 12-bit NSV video DACs Multiformat video output support Composite (CVBS), S-Video (Y/C), and Component YPrPb (SD, ED, and HD) Rovi Rev. 7.1.L1 (SD) and Rev. 1.4 (ED) compliant Simultaneous SD and ED/HD operation Professional video mode Capability to output up to 36-bit TTL data Video signal processor Full 12-bit, 4:4:4 YUV internal processing Motion adaptive de-interlacing with ultralow angle interpolation Multiple video processing paths Upscaling to 4k × 2k (ADV8003KBCZ-8x models only) Aspect ratio conversion/panorama scaling Cadence detection for the recovery of original frames from film-based content Dual video scalers enable simultaneous output of multiple different resolutions Sharpness and detail enhancement Noise reduction to reduce random, mosquito, and block noise Frame rate converter Support for up to 3 simultaneous video streams, including picture-in-picture (PiP) support On-screen display (OSD) Internally generated bitmap-based OSD allowing overlay on one or more video outputs Overlay on 3D video formats Dedicated OSD scaler Alpha blending of OSD data on video data Disturbance free blending of OSD on either of 2 zones Option of external OSD Easy to use software tool for developing OSDs APPLICATIONS High-end A/V receivers Upconverting DVD players/recorders Blu-ray players/recorders Set-top boxes Video conferencing Standalone video processors HDMI splitters FUNCTIONAL BLOCK DIAGRAM AUDIO INPUT DDR2 INTERFACE ADV8003 TTL DATA 60-BIT TTL PORT 24-BIT/ 36-BIT/ 48-BIT VIDEO INPUT 36-BIT VIDEO OUTPUT OSD BUILD AND SCALE LOW ANGLE PROCESSING DETAIL ENHANCE CADENCE DETECTION NOISE REDUCTION MOTION DETECTION ENHANCE DUAL SCALER AND OSD BLEND FRC HDMI Tx1 HDMI HDMI Tx2 HDMI HD VIDEO DACs HD VIDEO SD VIDEO DACs SD VIDEO CUE CORRECTION SERIAL VIDEO RECEIVER DE-INTERLACER VIDEO PROCESSING 10556-001 SERIAL VIDEO FOR EXAMPLE, ADV78500 OUTPUT Figure 1. Rev. B Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2012–2013 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADV8003 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Thermal Considerations............................................................ 59 Applications ....................................................................................... 1 Functional Overview...................................................................... 60 Functional Block Diagram .............................................................. 1 Video Input ................................................................................. 60 Revision History ............................................................................... 2 Flexible Digital Core .................................................................. 60 General Description ......................................................................... 3 Video Signal Processor (VSP) ................................................... 60 The ADV8003 Family .................................................................. 3 On-Screen Display (OSD) ......................................................... 61 Detailed Functional Block Diagram .............................................. 5 External DDR2 Memory ........................................................... 61 Specifications..................................................................................... 6 HDMI Transmitters ................................................................... 61 Electrical Characteristics ............................................................. 6 Video Encoder ............................................................................ 61 Analog Specifications ................................................................... 7 Professional Configuration ....................................................... 61 Data and I C Timing Characteristics ......................................... 8 Register Map Architecture ............................................................ 62 Absolute Maximum Ratings .......................................................... 18 Typical Applications Diagram ...................................................... 63 ESD Caution ................................................................................ 18 Outline Dimensions ....................................................................... 64 Pin Configuration and Function Descriptions ........................... 19 Ordering Guide .......................................................................... 64 2 Design Considerations ................................................................... 59 Power-Up Sequence ................................................................... 59 REVISION HISTORY 8/13—Revision B: Initial Version Rev. B | Page 2 of 64 Data Sheet ADV8003 GENERAL DESCRIPTION The ADV8003 is a multiple input video signal processor that can de-interlace and scale SD, ED, or HD video data to HD formats; generate a bitmap on-screen display (OSD); and output the video with OSD overlaid on two High Definition Multimedia Interface (HDMI®) transmitters and a video encoder. Video can be input into the ADV8003 in a number of ways: using the 48-bit TTL pixel port, using the 24-bit external OSD TTL pixel port, or from a device with an HDMI transmitter such as the ADV7850. The ADV8003 supports many of the formats outlined in the CEA-861 and VESA specifications, as well as several other widely used timing formats. Using two external DDR2 memories, the ADV8003 can perform high performance, motion adaptive interlaced to progressive conversion on SD and HD content. Using a single DDR2 memory, the HD de-interlacing is limited to intrafield. The ADV8003 features primary and secondary video scalers that enable simultaneous output of multiple different resolutions. The primary video scaler of the ADV8003KBCZ-8/8B/8C models is capable of upscaling to 4k × 2k format and downscaling from 1080p. The primary video scaler of the ADV8003KBCZ-7/ ADV8003KBCZ-7B/ADV8003KBCZ-7C/ADV8003KBCZ-7T models is capable of upscaling and downscaling to and from a 1080p format. The secondary video scaler facilitates up-scaling to 1080p and downscaling to 480p. Detail enhancement and image enhancing techniques such as random, mosquito, and block noise reduction allow for improved final image quality. The frame rate converter of the ADV8003 allows the conversion between common frame rates with support to output two different frame rates simultaneously under certain conditions. DDR2 INTERFACE 60-BIT INPUT VIDEO 48-BIT INPUT 1080p (OSD) HDMI Tx2 1080i (OSD) HD VIDEO DACs 720p (OSD) SD VIDEO DACs 480i The ADV8003 can accept OSD information from an external OSD source on the 24-bit external OSD TTL pixel data input or can internally generate a high quality, bitmap-based OSD. The internal OSD is highly flexible and allows the system designer to easily incorporate features like scrolling text and animation in various color depths up to 24-bit true color. Analog Devices, Inc., provides an OSD development tool (Blimp) to assist in the design, debug, and emulation of the OSD prior to integration with the system application. When the design is complete, the OSD development tool automatically generates code to which system APIs can be added before integration with the system application and an OSD design resource, which must be downloaded to an external SPI flash memory. Video can be output from the ADV8003 using one or both of the HDMI transmitters and/or the 6-DAC SD/HD video encoder. The flexible multiplexing allows simultaneous output on the HDMI transmitters and HD formats on the HD DACs (for example, 1080p) with SD formats on the SD DACs (for example, 480i). Both of the HDMI transmitters on the ADV8003 support all mandatory and many optional 3D video resolutions and audio return channels (ARC). Each transmitter also features a full CEC master. The ADV8003 can receive up to six channels of I2S, S/PDIF, direct stream digital (DSD), and high bit rate (HBR). The six 12-bit NSV® video DACs allow for composite (CVBS), S-Video (Y/C), and component (YPrPb) analog outputs in standard, enhanced, and high definition video formats. Oversampling of 216 MHz (SD and ED) and 297 MHz (HD) removes the requirement for external output filtering. The ADV8003 can also support 30-bit TTL in mode and 30-bit TTL out mode for professional applications, which do not require the use of HDMI. The ADV8003 supports the I2C protocol for communication with the system microcontroller. DIGITAL CORE THE ADV8003 FAMILY 10556-002 480i VIDEO FROM DECODER HDMI Tx1 channels, or displaying OSD on multiple outputs of different resolutions. Figure 2. Sample Multiple Output Configuration The ADV8003 has a flexible digital core that allows the user to configure the part in several different modes; for example, using a single video processing channel, using dual video processing There are a number of derivatives within the ADV8003 family, each featuring different capabilities; all are provided in the same 19 mm × 19 mm, 425-ball CSP_BGA package (see Table 1). Note that the functionality of the ADV8003KBCZ-8 is described throughout this data sheet. Some sections are not relevant to other models because not all of the blocks found in the ADV8003KBCZ-8 are included in those models. Table 1 lists the functionality for each model. Rev. B | Page 3 of 64 ADV8003 Data Sheet Table 1. Features Sets of the ADV8003 Family ICs Part Number ADV8003KBCZ-8 1 ADV8003KBCZ-8B ADV8003KBCZ-8C ADV8003KBCZ-71 ADV8003KBCZ-7B ADV8003KBCZ-7C ADV8003KBCZ-7T 1 Maximum Data Rate 3 Gbps 3 Gbps 3 Gbps 2.25 Gbps 2.25 Gbps 2.25 Gbps 2.25 Gbps Maximum Video Format 4k × 2k at 30 Hz (8-bit) 4k × 2k at 30 Hz (8-bit) 4k × 2k at 30 Hz (8-bit) UXGA (162 MHz) UXGA (162 MHz) UXGA (162 MHz) UXGA (162 MHz) HDMI TX Outputs 2 1 2 2 1 2 0 Analog Outputs Six 12-bit DACs No No Six 12-bit DACs No No No Rovi Output Yes No No Yes No No No VSP Yes Yes Yes Yes Yes Yes Yes Rovi enabled ICs require the buyer to be an approved licensee (authorized buyer) of ICs that are capable of outputting Rovi compliant video. Rev. B | Page 4 of 64 OSD Yes Yes Yes Yes Yes Yes Yes TTL Out Yes No No Yes No No Yes VS Figure 3. ADV8003KBCZ-8 Rev. B | Page 5 of 64 DDR_DQ[31:0] RESET GENERATION AND POWER MANAGEMENT TOP LEVEL CONTROL CLOCK GENERATION RECEIVER POWER SUPPLY DETAIL ENHANCEMENT CUE CORRECTION FRAME RATE CONVERTER SCALER 2 SCALER 1 SCALING AND FRAME RATE CONVERSION HEAC ARC PORT VIDEO PROCESSING AND OSD BLENDING BLOCK NOISE REDUCTION LOW ANGLE PROCESSING CADENCE DETECTION MOSQUITO NOISE REDUCTION MOTION DETECTION VIDEO ENHANCEMENT RANDOM NOISE REDUCTION DE-INTERLACER AND CADENCE DETECTION SPI SLAVE I2C SLAVE I/O, OSD, ENCODER VSP, HDMI Tx REGISTER MAPS SPI MASTER OSD SCALER BITMAP OSD CONTROLLER OSD GENERATION CONTROL OSD VIDEO BLEND DDR_VREF INT0 INT1 INT2 XTALP XTALN RX_0 P RX_0N RX_1 P RX_1N RX_2 P RX_2N RX_C P RX_CN RX_HPD RX_5V PCLK DE DIGITAL VIDEO CAPTURE AND FORMATTING DDR_RAS HS OSD VIDEO CAPTURE AND FORMATTING DDR_CS P[35:0] OSD_DE OSD_CLK OSD_IN[12] OSD_VS COLOR SPACE CONVERSION UPDITHER TO VBI INSERTION IN ENCODER BLOCK DDR_WE OSD_HS OSD_IN[23:16]/ OSD_IN[11:0]/ EXT_DIN[7:0] DDR_DQS[3:0] SPI SLAVE DDR_DQS[3:0] OSD_IN[15:13]/ VBI_x DDR_DM[3:0] COLOR SPACE CONVERSION UPDITHER DDR_BA[2:0] COLOR SPACE CONVERSION UPDITHER DDR_A[12:0] VIDEO MUXING DDR_CAS DDR2 INTERFACE DDR_CK VBI DATA SERVICE INSERTION PROGRAMMABLE CHROMINANCE FILTERS PROGRAMMABLE LUMINANCE FILTERS SHARPNESS AND ADAPTIVE FILTER CONTROL HDCP ENCRYPTION SUBCARRIER FREQ LOCK SIN/COS MODULATION/COS SYNC INSERTION ENCODER 4:2:2 4:4:4 AND COLOR SPACE CONVERTER HDMI Tx VIDEO DATA CAPTURE PROGRAMMABLE HDTV FILTERS 4:2:2 4:4:4 AND COLOR SPACE CONVERTER REFERENCE AND CABLE DETECTION 12-BIT DAC6 12-BIT DAC5 12-BIT DAC4 12-BIT DAC3 12-BIT DAC2 12-BIT DAC1 TMDS OUTPUTS HDCP KEYS TMDS OUTPUTS HDCP KEYS MASTER I2C CEC CONTROL HDCP ENCRYPTION HDCP AND EDID UNCONTROLLER AUDIO DATA CAPTURE HDMI Tx VIDEO DATA CAPTURE ED/HD PROCESSOR DDR_CK MULTIPLEXER MCLK 16×/4× OVERSAMPLING FILTERS SCLK SD PROCESSOR DSD_CLK 2 × PLLs AUD_IN[5:0] DDR2 CONTROLLER INTER FACE DAC6 DAC5 DAC4 DAC3 DAC2 DAC1 TX2_0+ TX2_0– TX2_1+ TX2_1– TX2_2+ TX2_2– TX2_C+ TX2_C– TX1_0+ TX1_0– TX1_1+ TX1_1– TX1_2+ TX1_2– TX1_C+ TX1_C– HPD_TX1 HPD_TX2 DDC1_SC L DDC1_SD A DDC2_SC L DDC2_SD A CEC2 CEC1 Data Sheet ADV8003 DETAILED FUNCTIONAL BLOCK DIAGRAM COMPx RSETx VREF ELPFx SFL ALSB SCL SDA CS2 SCK2 MISO2 MOSI2 CS1 SCK1 MISO1 MOSI1 HEAC_1+ HEAC_1– HEAC_2+ HEAC_2– ARC1_OUT ARC2_OUT DVDD_IO PVDD_DDR DVDD_DDR AVDDx CVDD1 PVDDx DVDD PDN RESET 10556-003 ADV8003 Data Sheet SPECIFICATIONS Measured at DVDD = 1.746 V to 1.854 V, DVDD_DDR = 1.746 V to 1.854 V, PVDD1 = 1.746 V to 1.854 V, PVDD2 = 1.746 V to 1.854 V, PVDD3 = 1.746 V to 1.854 V, PVDD5 = 1.746 V to 1.854 V, PVDD6 = 1.746 V to 1.854 V, PVDD_DDR = 1.746 V to 1.854 V, AVDD3 = 1.746 V to 1.854 V, CVDD1 = 1.746 V to 1.854 V, AVDD1 = 3.20 V to 3.40 V, AVDD2 = 3.20 V to 3.40 V, DVDD_IO = 3.20 V to 3.40 V, TMIN to TMAX = 0°C to 70°C, unless otherwise noted. ELECTRICAL CHARACTERISTICS Table 2. Parameter STATIC PERFORMANCE Resolution (Each DAC) Integral Nonlinearity, +ve 1 Integral Nonlinearity, −ve1 Differential Nonlinearity, +ve 2 Differential Nonlinearity, −ve2 DIGITAL INPUTS Input High Voltage Symbol Test Conditions/Comments N INL INL DNL DNL DAC outputs sampled at 500 kHz DAC outputs sampled at 500 kHz DAC outputs sampled at 500 kHz DAC outputs sampled at 500 kHz VIH Input Low Voltage VIL Input Leakage Current IIN Input Capacitance DIGITAL INPUTS (5 V TOLERANT) Input High Voltage Input Low Voltage Input Leakage Current DIGITAL OUTPUTS Output High Voltage Output Low Voltage High Impedance Leakage Current Output Capacitance POWER REQUIREMENTS 3, 4, 5 Digital Power Supply PLL Analog Supply PLL Digital Supply Encoder PLL Supply HDMI Tx1 PLL Power Supply HDMI Tx2 PLL Power Supply HDMI Analog Power Supply Comparator Power Supply HDMI Rx Inputs Analog Supply Encoder Analog Power Supply Digital Interface Supply Digital Power Supply Current, Including DVDD_DDR and PVDD_DDR Min HEAC inputs DDR_DQS inputs Other digital inputs 13 VOH VOL ILEAK COUT 2.4 DVDD PVDD1 PVDD2 PVDD3 PVDD5 PVDD6 AVDD3 CVDD1 AVDD1 AVDD2 DVDD_IO IDVDD 1.746 1.746 1.746 1.746 1.746 1.746 1.746 1.746 3.20 3.20 3.20 PLL Digital Supply Current IPVDD2 V 0.3 × DVDD_IO ±60 ±60 ±10 3.4 0.8 ±60 0.4 ±10 13 Mode 1 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 3.3 3.3 3.3 1989.0 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode 1423.0 60.6 23.0 21.0 1.3 21.8 19.9 0.2 Rev. B | Page 6 of 64 Unit Bits LSB LSB LSB LSB 0.7 × DVDD_IO VIH VIL IIN IPVDD1 Max 12 0.389 −0.322 0.183 −0.208 CIN PLL Analog Supply Current Typ 1.854 1.854 1.854 1.854 1.854 1.854 1.854 1.854 3.40 3.40 3.40 V µA µA µA pF V V µA V V µA pF V V V V V V V V V V V mA mA mA mA mA mA mA mA mA Data Sheet Parameter Encoder PLL Supply Current ADV8003 Symbol IPVDD3 HDMI Tx1 PLL Supply Current IPVDD5 HDMI Tx2 PLL Supply Current IPVDD6 HDMI Analog Power Supply Current IAVDD3 Comparator Power Supply Current ICVDD1 HDMI Rx Inputs Analog Supply Current IAVDD1 Encoder Analog Power Supply IAVDD2 Digital Interface Supply Current IDVDD_IO Test Conditions/Comments Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Mode 1 Mode 2 Power-down mode Min Typ 8.9 3.8 0.0 62.2 49.3 1.8 62.5 2.1 1.6 52.9 19.7 3.6 76.1 69.6 1.1 62.3 56.8 6.3 36.2 9.2 1.9 1.14 1.93 0.1 Max Unit mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA mA Integral nonlinearity (INL) measures the deviation of the actual DAC transfer function from the ideal. For +ve INL, the actual line lies above the ideal line value. For −ve INL, the actual line lies below the ideal line value. 2 Differential nonlinearity (DNL) measures the deviation of the actual DAC output voltage step from the ideal. For +ve DNL, the actual step value lies above the ideal step value. For −ve DNL, the actual step value lies below the ideal step value. 3 Mode 1 involves a 1080i60 input to the ADV8003 receiver and a 720p60 input to the ADV8003 TTL external OSD input. Both inputs are run through the front-end color space converters. The 1080i60 video stream is de-interlaced and upscaled to 4k × 2k at 24 Hz. The 720p video stream is input to the OSD block and is blended onto the 4k × 2k at 24 Hz video stream using the OSD block scaler. Both HDMI transmitters are then driven using the 4k × 2k at 24 Hz output. 4 Mode 2 involves a 1080i60 input to the ADV8003 receiver. This input is run through the front-end color space converter. The 1080i60 video stream is de-interlaced and is output to HDMI Transmitter 1. The secondary VSP is used to convert the 1080p video stream to 480i and is output using the SD encoder. 5 In the power-down mode, the ARC and the internal clock tree are kept active. 1 ANALOG SPECIFICATIONS Table 3. Parameter Low Drive Output Current (Full Scale) DAC-to-DAC Matching Output Compliance, VOC Output Capacitance, COUT DAC Analog Output Skew Test Conditions/Comments RSET = 4.12 kΩ, RL = 300 Ω DAC1 to DAC6 Min 3.95 Typ 4.3 0.9 0 DAC1, DAC2, DAC3 DAC4, DAC5, DAC6 DAC1 to DAC6 Rev. B | Page 7 of 64 Max 4.5 1.4 9 9 0.2 Unit mA % V pF pF ns ADV8003 Data Sheet DATA AND I2C TIMING CHARACTERISTICS For input timing measurements, VIH = DVDD_IO and VIL = GND. Table 4. Parameter TMDS CLOCK TMDS Input Clock Frequency Symbol TMDS Output Clock Frequency CLOCK AND CRYSTAL Crystal Frequency, XTAL Crystal Frequency Stability Primary Video Input Clock Frequency Range Secondary Video Input Clock Frequency Range Video Output Clock Frequency Range Serial Port 1 SCK Frequency (SCK1) Serial Port 2 SCK Frequency (SCK2) Serial Port 3 SCK Frequency (VBI_SCK) Audio SCLK Frequency Audio MCLK Frequency Audio DSD Clock Frequency FAST I2C PORTS 1 SCL Frequency SCL Minimum Pulse Width High SCL Minimum Pulse Width Low Start Condition Hold Time Start Condition Setup Time SDA Setup Time SCL and SDA Rise Time SCL and SDA Fall Time Stop Condition Setup Time SERIAL PORT 2, 3 Master Serial Port (Serial Port 2) CS2 Falling Edge to SCK2 Rising/Falling Edge Test Conditions/Comments Min ADV8003KBCZ-8, ADV8003KBCZ-8B, ADV8003KBCZ-8C ADV8003KBCZ-7, ADV8003KBCZ-7B, ADV8003KBCZ-7C, ADV8003KBCZ-7T ADV8003KBCZ-8, ADV8003KBCZ-8B, ADV8003KBCZ-8C ADV8003KBCZ-7, ADV8003KBCZ-7B, ADV8003KBCZ-7C, ADV8003KBCZ-7T Typ Max Unit 25 297 MHz 25 225 MHz 25 297 MHz 25 225 MHz ±50 162 162 162 50 81 27 49.152 98.304 5.6448 MHz ppm MHz MHz MHz MHz MHz MHz MHz MHz MHz 27 13.5 13.5 13.5 11.5 400 t1 t2 t3 t4 t5 t6 t7 t8 t9, t10 SCK2 Rising/Falling Edge to CS2 Rising Edge t11, t12 CS2 Pulse Width SCK2 High Time t13 t14 600 1.3 600 600 100 300 300 0.6 t9, t10, depending on the values of CPHA and CPOL t11, t12, depending on the values of CPHA and CPOL SCK2 Low Time 1 × SCK2 periods 1 × SCK2 periods 1880 0.45 × SCLK2 periods 0.45 × SCLK2 periods Rev. B | Page 8 of 64 1.5 × SCLK2 periods 1.5 × SCLK2 periods 1900 0.55 × SCLK2 periods 0.55 × SCLK2 periods kHz ns µs ns ns ns ns ns µs ns ns ns % duty cycle % duty cycle Data Sheet Parameter MOSI2 Start of Data Invalid to SCK2 Falling Edge CS2 Start of Data Invalid to SCK2 Falling Edge SCK2 Falling Edge to MOSI2 End of Data Invalid SCK2 Falling Edge to CS2 End of Data Invalid MISO2 Setup Time ADV8003 Symbol t15 t15 Test Conditions/Comments SPI Mode 0, SPI Mode 3 SPI Mode 0, SPI Mode 3 t16 t16 t17 SPI Mode 0, SPI Mode 3 SPI Mode 0, SPI Mode 3 Valid regardless of the SCK2 active edge used Valid regardless of the SCK2 active edge used SPI Mode 1, SPI Mode 2 SPI Mode 1, SPI Mode 2 SPI Mode 1, SPI Mode 2 SPI Mode 1, SPI Mode 2 Valid regardless of the SCK2 active edge used Valid regardless of the SCK2 active edge used MISO2 Hold Time t18 MOSI2 Start of Data Invalid to SCK2 Rising Edge CS2 Start of Data Invalid to SCK2 Rising Edge SCK2 Rising Edge to MOSI2 End of Data Invalid SCK2 Rising Edge to CS2 End of Data Invalid MISO2 Setup Time t19 t19 t20 t20 t21 MISO2 Hold Time t22 Slave Mode (Serial Port 1) CS1 Falling Edge to SCK1 Rising/Falling Edge t23, t24 SCK1 Rising/Falling Edge to CS1 Rising Edge t25, t26 CS1 Pulse Width t27 SCK1 High Time t30 Max 1.15 0.81 Unit ns ns 1.85 2.14 14.57 ns ns ns 0.0 ns 1.59 1.24 1.39 1.68 14.57 ns ns ns ns ns 0.0 ns t31 t32 t33 SPI Mode 0, SPI Mode 3 SPI Mode 0, SPI Mode 3 SPI Mode 0, SPI Mode 3 t34 t35 t36 t37 t38 SPI Mode 0, SPI Mode 3 SPI Mode 1, SPI Mode 2 SPI Mode 1, SPI Mode 2 SPI Mode 1, SPI Mode 2 SPI Mode 1, SPI Mode 2 t39 ns 50.0 ns 0.55 × SCK1 periods 0.45 × SCK1 periods 0.55 × SCK1 periods 0.15 1.4 5.89 12.08 0 1.96 5.79 11.97 0.45 × VBI_SCK periods 0.45 × VBI_SCK periods 0.55 × VBI_SCK periods 0.55 × VBI_SCK periods 5× VBI_SCK periods SPI Mode 0 only SPI Mode 0 only Rev. B | Page 9 of 64 ns 0.45 × SCK1 periods VBI_CS Pulse Width t40 t41 50.0 5 × SCK1 periods VBI_SCK Low Time VBI_CS, VBI_MOSI Setup Time VBI_CS, VBI_MOSI Hold Time Typ t23, t24, depending on the values of CPHA and CPOL t25, t26, depending on the values of CPHA and CPOL SCK1 Low Time MOSI1 Setup Time MOSI1 Hold Time SCK1 Falling Edge to MISO1 Start of Data Invalid SCK1 Falling Edge to MISO1 End of Data Invalid MOSI1 Setup Time MOSI1 Hold Time SCK1 Rising Edge to MISO1 Start of Data Invalid SCK1 Rising Edge to MISO1 End of Data Invalid Slave Mode (Serial Port 3) VBI_SCK High Time Min 0.93 0.75 % duty cycle % duty cycle ns ns ns ns ns ns ns ns % duty cycle % duty cycle ns ns ns ADV8003 Parameter SPI Pass-Through Mode Data Transition on SCK1 to Start of Data Invalid on SCK2 Data Transition on SCK1 to End of Data Invalid on SCK2 Data Transition on MOSI1 to Start of Data Invalid on MOSI2 Data Transition on MOSI1 to End of Data Invalid on MOSI2 Data Transition on MISO2 to Start of Data Invalid on MISO1 Data Transition on MISO2 to End of Data Invalid on MISO1 Data Transition on CS1 to Start of Data Invalid on CS2 Data Transition on CS1 to End of Data Invalid on CS2 RESET FUNCTION Reset Pulse Width VIDEO DATA AND CONTROL INPUTS3 PCLK High Time Data Sheet Symbol Test Conditions/Comments Max Unit t42 5.17 ns t43 10.20 ns t42 4.90 ns t43 10.85 ns t42 5.29 ns t43 11.97 ns t42 4.61 ns t43 8.78 ns t44 ms 0.45 × PCLK period 0.55 × PCLK period 0.45 × PCLK period 0.55 × PCLK period 0.55 × OSD_CLK period 0.55 × OSD_CLK period t45 0.45 × OSD_CLK period 0.45 × OSD_CLK period 1.42 t46 0.95 ns t47 0.72 ns t48 1.49 ns t51 OSD_CLK Low Time Main Video Input, SDR and DDR Mode Setup Time (Data Latched on Rising Edge) Main Video Input, SDR and DDR Modes Hold Time (Data Latched on Rising Edge) Main Video Input, DDR Mode Setup Time (Data Latched on Falling Edge) Main Video Input, DDR Mode Hold Time (Data Latched on Falling Edge) Interleaved Video Input, SDR Setup Time (Data Latched on Rising Edge) Interleaved Video Input, SDR Hold Time (Data Latched on Rising Edge) External OSD Input, SDR and DDR Mode Setup Time (Data Latched on Rising Edge) External OSD Input, SDR and DDR Mode Hold Time (Data Latched on Rising Edge) External OSD Input, DDR Mode Setup Time (Data Latched on Rising Edge) External OSD Input, DDR Mode Hold Time (Data Latched on Rising Edge) Typ 5 PCLK Low Time OSD_CLK High Time Min % duty cycle % duty cycle % duty cycle % duty cycle ns t49 Used for 300 MHz TTL data 1.42 ns t50 Used for 300 MHz TTL data 0.95 ns t52 1.33 ns t53 0.94 ns t54 0.57 ns t55 1.51 ns Rev. B | Page 10 of 64 Data Sheet ADV8003 Parameter VIDEO DATA AND CONTROL OUTPUTS3 OSD_CLK High Time Symbol Test Conditions/Comments Max Unit t57 0.60 × OSD_CLK period 0.60 × OSD_CLK period 0.07 % duty cycle % duty cycle ns t58 1.56 ns t59 0.41 ns t60 0.93 ns 0.55 × MCLK periods 0.55 × MCLK periods % duty cycle % duty cycle ns ns 0.55 × SCLK periods 0.55 × SCLK periods % duty cycle % duty cycle ns ns 0.55 × DSDCLK periods 0.55 × SCLK periods % duty cycle % duty cycle ns ns t56 Typ 0.40 × OSD_CLK period 0.40 × OSD_CLK period OSD_CLK Low Time OSD_CLK Active Edge to Data and Control Start of Data Invalid (Data Latched on Falling Edge) OSD_CLK Active Edge to Data and Control End of Data Invalid (Data Latched on Falling Edge) OSD_CLK Active Edge to Data and Control Start of Data Invalid (Data Latched on Rising Edge) OSD_CLK Active Edge to Data and Control End of Data Invalid (Data Latched on Rising Edge) S/PDIF INPUT3 MCLK High Time Min t61 0.45 × MCLK periods MCLK Low Time 0.45 × MCLK periods S/PDIF Data Setup Time S/PDIF Data Hold Time I2S PORT, SLAVE MODE3 SCLK High Time t62 t63 0.12 1.89 t64 0.45 × SCLK periods SCLK Low Time 0.45 × SCLK periods I2S Data Setup Time I2S Data Hold Time DSD PORT3 DSD Clock High Time t65 t66 0.42 1.38 t67 0.45 × DSD CLK periods DSD Clock Low Time 0.45 × SCLK periods DSD Data Setup Time DSD Data Hold Time t68 t69 0.48 1.79 It is possible to run I2C at faster speeds; however, it has been characterized to run only in fast mode. All serial port measurements are for the default polarity and phase settings (clock low in idle state and negative edge used). 3 All measurements are guaranteed by design only. 1 2 Timing Diagrams t3 t5 t3 SDA t1 SCL t2 t7 t4 2 Figure 4. I C Timing Rev. B | Page 11 of 64 t8 10556-004 t6 ADV8003 Data Sheet t13 t9 t11 t12 t10 CS2 0 0 0 SCK2 1 0 1 SCK2 2 1 0 SCK2 3 1 1 SCK2 INSTRUCTION(0x0B) MOSI2 24-BIT ADDRESS 23 22 21 ... 3 2 1 DUMMY BYTE 0 7 6 5 4 3 2 1 0 DATA OUT 1 MISO2 7 6 5 4 3 2 DATA OUT 2 1 0 7 6 5 4 3 2 1 10556-005 SPI MODE CPOL CPHA 0 Figure 5. Detailed SPI Master Timing Diagram (Serial Port 2) t14 t17 t17 t18 t15 t18 t16 SCK2 MOSI2 CS2 MISO2 (FALLING EDGE CAPTURE) 10556-006 MISO2 (RISING EDGE CAPTURE) Figure 6. Serial Port 2 Master Mode Timing (SPI Mode 0 and SPI Mode 3) t14 t21 t19 t20 t21 t22 t22 SCK2 MOSI2 CS2 MISO2 (RISING EDGE CAPTURE) 10556-007 MISO2 (FALLING EDGE CAPTURE) Figure 7. Serial Port 2 Master Mode Timing (SPI Mode 1 and SPI Mode 2) Rev. B | Page 12 of 64 Data Sheet ADV8003 t27 t23 SPI MODE CPOL CPHA t24 CS1 0 0 0 SCK1 1 0 1 SCK1 2 1 0 SCK1 3 1 1 SCK1 t25 t26 W/R 7 6 5 4 1 2 3 0 7 6 5 4 3 2 1 0 7 5 6 4 3 2 DATA IN 1 1 0 7 6 7 6 6 5 4 3 2 3 2 1 0 5 4 3 2 1 0 1 0 DATA OUT 1 DATA OUT 0 7 4 DATA OUT 0 DUMMY BYTE DELAY MODE 1 MISO1 DELAY MODE 0 MISO1 5 1 0 7 6 5 4 3 2 10556-008 MOSI1 DATA IN 0 SUB ADDRESS DEVICE ADDRESS Figure 8. Detailed SPI Slave Timing Diagram (Serial Port 1) t30 t31 t34 t32 t33 SCK1 10556-009 MOSI1 MISO1 Figure 9. Serial Port 1 Slave Mode Timing (SPI Mode 0 and SPI Mode 3) t30 t35 t38 t37 t36 SCK1 10556-010 MOSI1 MI SO1 Figure 10. Serial Port 1 Slave Mode Timing (SPI Mode 1 and SPI Mode 2) t39 t40 t41 VBI_SCK 10556-011 VBI_CS VBI_MOSI Figure 11. Serial Port 3 Slave Mode Timing (SPI Mode 0 Only) Rev. B | Page 13 of 64 ADV8003 Data Sheet t43 t42 SCK1 MISO2 MOSI1 CS1 10556-012 SCK2 MISO1 MOSI2 CS2 Figure 12. SPI Pass-Through Mode (Serial Port 1 and Serial Port 2) t45 t44 t46 PCLK 10556-013 P[35:0] HS VS DE Figure 13. Main Video Input, Noninterleaved SDR Video Data and Control Timing t44 PCLK t47 t46 t48 t45 10556-014 P[35:0] HS VS DE Figure 14. Main Video Input, Noninterleaved DDR Video Data and Control Timing t44 PCLK t49 t50 OSD_IN[11:0] P[35:24] 10556-015 P[23:0] HS VS DE Figure 15. Interleaved SDR Video Data and Control Input Timing Rev. B | Page 14 of 64 Data Sheet ADV8003 t51 OSD_CLK t53 t52 10556-016 OSD_IN[23:0] OSD_HS OSD_VS OSD_DE Figure 16. External OSD Input, Noninterleaved SDR Video Data and Control Timing t51 OSD_CLK t54 t53 t55 t52 10556-017 OSD_IN[23:0] OSD_HS OSD_VS OSD_DE Figure 17. External OSD Input, Noninterleaved DDR Video Data and Control Timing t56 OSD_CLK t57 t58 10556-018 OSD_IN[23:0] P[35:24] OSD_HS OSD_VS OSD_DE Figure 18. SDR Video Data and Control Output Timing (Data Launched on Falling Edge) t56 OSD_CLK t59 t60 10556-119 OSD_IN[23:0] P[35:24] OSD_HS OSD_VS OSD_DE Figure 19. SDR Video Data and Control Output Timing (Data Launched on Rising Edge) Rev. B | Page 15 of 64 ADV8003 Data Sheet t61 MCLK t62 t63 10556-120 S/PDIF AUDIO DATA Figure 20. S/PDIF Input Timing, Data Latched on Rising Edge DATA SYNC IMPULSE S/PDIF 1.5 × tMCLK 10556-020 tMCLK 0.5 × tMCLK Figure 21. S/PDIF Data Timing t64 SCLK t65 t66 10556-021 I2S[3:0] LRCLK Figure 22. I2S Timing AUD_IN[5] RIGHT LEFT SCLK MSBLEFT LSB LSB MSBRIGHT 32 CLOCK SLOTS 32 CLOCK SLOTS I2S STANDARD I2S FORMAT = 00 10556-022 AUD_IN[4:1] Figure 23. I2S Standard Audio—Data Width of 16 Bits to 24 Bits per Channel AUD_IN[5] LEFT RIGHT SCLK LSBRIGHT LSBLEFT MSBLEFT LSB MSBRIGHT 16 CLOCK SLOTS 16 CLOCK SLOTS I2S STANDARD 16-BIT PER CHANNEL I2S FORMAT = 00 Figure 24. I2S Standard Audio—16-Bit Samples Only Rev. B | Page 16 of 64 10556-023 AUD_IN[4:1] Data Sheet AUD_IN[5] ADV8003 LEFT RIGHT SCLK AUD_IN[4:1] MSB MSB MSB MSB – 1 MSB LSB MSB MSB MSB MSB – 1 MSB LSB MSB EXTENDED MSB EXTENDED 32 CLOCK SLOTS 10556-024 32 CLOCK SLOTS SERIAL AUDIO RIGHT JUSTIFIED 2 I S FORMAT = 01 Figure 25. Serial Audio—Right-Justified AUD_IN[5] LEFT RIGHT SCLK AUD_IN[4:1] LSB MSB LSB MSB 32 CLOCK SLOTS 32 CLOCK SLOTS 10556-125 SERIAL AUDIO LEFT JUSTIFIED I2S FORMAT = 10 Figure 26. Serial Audio—Left-Justified AUD_IN[5] CHANNEL A CHANNEL B SCLK MSB V U C LSB P MSB V U 32 CLOCK SLOTS C P 32 CLOCK SLOTS FRAME n FRAME n + 1 AES3 DIRECT AUDIO I2S FORMAT = 11 Figure 27. AES3 Direct Audio t67 DSD_CLK t68 t69 DSD[5:0] Figure 28. DSD Timing Rev. B | Page 17 of 64 10556-126 LSB 10556-127 AUD_IN[4:1] ADV8003 Data Sheet ABSOLUTE MAXIMUM RATINGS Table 5. Parameter AVDD1, ADDD2, DVDD_IO to GND DVDD, PVDDx, CVDD1, AVDD3, DVDD_DDR, PVDD_DDR to GND DVDD to Other 1.8 V Power Supplies 1 PVDD1 to Other 1.8 V Power Supplies1 PVDD2 to Other 1.8 V Power Supplies1 PVDD3 to Other 1.8 V Power Supplies1 PVDD5 to Other 1.8 V Power Supplies1 PVDD6 to Other 1.8 V Power Supplies1 CVDD1 to Other 1.8 V Power Supplies1 AVDD3 to Other 1.8 V Power Supplies1 DVDD_DDR to Other 1.8 V Power Supplies1 PVDD_DDR to Other 1.8 V Power Supplies1 Digital Inputs to GND Serial Video Inputs to GND DDR_IO and DDR_VREF to GND 5 V Tolerant Digital Inputs to GND 2 1.8 V Analog Inputs to GND 3.3 V Analog Inputs to GND HDMI Digital Outputs to GND Digital Outputs Voltage to GND Analog Outputs Voltage to GND 3 Maximum Junction Temperature (TJ MAX) Storage Temperature Range Infrared Reflow Soldering (20 sec) Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Rating 3.9 V 2.2 V −0.3 V to +0.3 V −0.3 V to +0.3 V −0.3 V to +0.3 V −0.3 V to +0.3 V −0.3 V to +0.3 V −0.3 V to +0.3 V −0.3 V to +0.3 V −0.3 V to +0.3 V −0.3 V to +0.3 V ESD CAUTION −0.3 V to +0.3 V −0.3 V to DVDD_IO + 0.3 V −0.3 V to CVDD1 + 0.3 V −0.3 V to DVDD_DDR + 0.3 V −0.3 V to +5.5 V −0.3 V to AVDD3 + 0.3 V −0.3 V to AVDD2 + 0.3 V −0.3 V to AVDD3 + 0.3 V −0.3 V to DVDD_IO + 0.3 V −0.3 V to AVDD2 + 0.3 V 125°C −65°C to+150°C 260°C 1.8 V power supplies include DVDD, PVDD1, PVDD2, PVDD3, PVDD5, PVDD6, CVDD1, AVDD3, DVDD_DDR, and PVDD_DR. The following inputs are 5 V tolerant: CEC1, CEC2, DDC1_SCL, DDC2_SCL, DDC1_SDA, DDC2_SDA, HEAC_1−, HEAC_1+, HEAC_2−, HEAC_2+, RX_5V, and RX_HPD. 3 Except the ELPF1 and ELPF2 outputs, which are kept to −0.3 V to PVDD3 + 0.3 V; the RTERM output, which is kept to −0.3 V to CVDD1 + 0.3 V; and the R_TX1 and R_TX2 outputs, which are kept to −0.3 V to PVDD5 + 0.3 V. 1 2 Rev. B | Page 18 of 64 Data Sheet ADV8003 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 2 3 4 5 6 9 10 A OSD_ DE OSD_ CLK/ EXT_ CLK AUD_ IN[1] AUD_ IN[2] AUD_ IN[5] ARC2_ OUT MOSI1 SCK2 CS2 B OSD_ IN[21]/ EXT_ DIN[5] OSD_ IN[22]/ EXT_ DIN[6] OSD_ VS AUD_ IN[0] AUD_ IN[3] SFL ARC1_ MISO1 OUT MOSI2 MISO2 C OSD_ IN[19]/ EXT_ DIN[3] OSD_ IN[20]/ EXT_ DIN[4] GND AUD_ IN[4] DSD_ CLK SCLK SCL SCK1 GND INT0 PDN GND D OSD_ IN[16]/ EXT_ DIN[0] OSD_ IN[17]/ EXT_ DIN[1] OSD_ IN[18]/ EXT_ DIN[2] GND DVDD_ IO MCLK SDA CS1 GND INT1 INT2 DVDD_ IO OSD_ IN[15]/ VBI_CS DVDD_ IO E OSD_ OSD_ IN[13]/ IN[14]/ VBI_SCK VBI_MOSI 7 8 11 12 14 15 RESET XTALN PVDD2 NC NC XTALP PVDD1 NC NC GND RX_CP RX_0P RX_1P GND NC NC RX_ HPD AVDD1 GND TEST1 NC NC RX_5V NC NC ALSB 13 16 17 18 19 20 21 22 23 RX_2N CVDD1 RSET1 VREF A COMP1 DAC4 B AVDD1 AVDD1 DAC5 DAC6 C RTERM AVDD2 AVDD2 DAC1 DAC2 D COMP2 DAC3 E RSET2 PVDD3 GND CEC1 F GND AVDD3 G CVDD1 RX_CN RX_0N RX_1N GND RX_2P TEST2 GND GND F OSD_ IN[9] OSD_ IN[10] OSD_ IN[11] OSD_ IN[12] G OSD_ IN[5] OSD_ IN[6] OSD_ IN[7] OSD_ IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 H OSD_ IN[1] OSD_ IN[2] OSD_ IN[3] OSD_ IN[4] GND GND GND GND GND GND GND GND GND GND GND GND GND TX1_2+ TX1_2– H OSD_ HS OSD_ IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD DDC1_ SDA GND TX1_1+ TX1_1– J DVDD_ DVDD_ IO IO GND GND GND GND GND GND GND GND GND GND GND DDC1_ SCL J DE HS K VS PCLK GND TX1_0+ TX1_0– K L P[32] P[33] P[34] P[35] DVDD GND GND GND GND GND GND GND GND GND GND HPD_ TX1 GND TX1_C+ TX1_C– L M P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND R_TX1 PVDD5 HEAC_ HEAC_ 1– 1+ M N P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND CEC2 PVDD5 AVDD3 DVDD DDC2_ SCL GND TX2_2+ TX2_2– P GND TX2_1+ TX2_1– R P P[20] P[21] P[22] DVDD P[23] GND GND GND GND GND GND GND GND GND NC N R P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND DDC2_ SDA T P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND HPD_ TX2 GND TX2_0+ TX2_0– T U P[10] P[11] P[12] P[13] GND GND DVDD GND GND DVDD GND GND DVDD GND GND R_TX2 GND TX2_C+ TX2_C– U V P[6] P[7] P[8] P[9] GND PVDD6 HEAC_ HEAC_ 2+ 2– V W P[2] P[3] P[4] P[5] TEST3 Y P[0] P[1] DDR_ DQS[2] GND AA DDR_ DQ[18] AB DDR_ DDR_ DDR_ DQ[21] DQ[19] DQ[17] AC DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9] 1 GND 2 GND 3 DDR_ CAS DVDD_ DDR DDR_ A[2] GND DDR_ CS DVDD_ DDR DDR_ CK DDR_ A[12] DDR_ A[6] DDR_ A[3] DDR_ A[0] DDR_ BA[0] DDR_ RAS DDR_ CKE DDR_ A[5] DDR_ A[7] DDR_ A[1] DDR_ A[10] DDR_ BA[1] DDR_ BA[2] DDR_ WE DDR_ VREF 9 10 12 13 14 15 16 GND DDR_ A[11] DDR_ DDR_ DVDD_ DDR_ DQS[2] DQ[26] DDR DQS[3] NC/ GND DDR_ DM[2] 4 DDR_ DQ[30] 5 DDR_ DM[3] 6 DDR_ DDR_ DQ[31] DQ[29] 7 8 DDR_ CK GND DDR_ DVDD_ DDR_ DQS[3] DQ[23] DDR DVDD_ DDR DDR_ A[4] DDR_ A[8] 11 DVDD_ DDR GND DDR_ DQ[9] GND DDR_ DVDD_ DQ[11] DDR GND W DDR_ DQ[6] PVDD_ DDR GND Y AA DDR_ DM[1] DDR_ DM[0] GND GND DDR_ DQ[3] DDR_ DQ[13] DDR_ DQ[0] DDR_ DQ[5] DDR_ DQS[0] DDR_ DQ[4] AB DDR_ DDR_ DDR_ DQ[10] DQS[1] DQ[15] DDR_ DQ[7] DDR_ DQ[2] DDR_ DQS[0] DDR_ DQ[1] AC 20 21 22 23 DDR_ DDR_ DQ[12] DQS[1] 17 Figure 29. ADV8003KBCZ-8 and ADV8003KBCZ-7 Pin Configuration Rev. B | Page 19 of 64 DVDD_ DDR_ DQ[14] DDR NC PVDD6 AVDD3 DDR_ DQ[8] 18 19 10556-025 1 OSD_ IN[23]/ EXT_ DIN[7] ADV8003 Data Sheet Table 6. ADV8003KBCZ-8 and ADV8003KBCZ-7 Pin Function Descriptions Pin No. A1 Mnemonic OSD_IN[23]/EXT_DIN[7] A2 A3 OSD_DE OSD_CLK/EXT_CLK Type OSD video input/ miscellaneous digital OSD video sync OSD video sync A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 AUD_IN[1] AUD_IN[2] AUD_IN[5] ARC2_OUT MOSI1 SCK2 CS2 RESET XTALN PVDD2 Audio input Audio input Audio input Audio output Serial port control Serial port control Serial port control Miscellaneous digital Miscellaneous digital 1 Power A14 A15 A16 A17 A18 A19 A20 A21 A22 NC NC CVDD1 RX_CN RX_0N RX_1N RX_2N CVDD1 RSET1 N/A N/A Power Rx input Rx input Rx input Rx input Power A23 VREF Miscellaneous analog1 B1 OSD_IN[21]/EXT_DIN[5] B2 OSD_IN[22]/EXT_DIN[6] B3 B4 B5 B6 B7 B8 B9 B10 B11 OSD_VS AUD_IN[0] AUD_IN[3] SFL ARC1_OUT MISO1 MOSI2 MISO2 ALSB OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video sync Audio input Audio input SFL Audio output Serial port control Serial port control Serial port control I2C control B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 XTALP PVDD1 NC NC GND RX_CP RX_0P RX_1P RX_2P GND COMP1 DAC4 Miscellaneous analog1 Miscellaneous digital1 Power N/A N/A GND Rx input Rx input Rx input Rx input GND Miscellaneous analog1 Analog video output Description External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[7]). Data Enable for the OSD Input Port. Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data (EXT_CLK). I2S0/DSD1 Audio Input. I2S1/DSD2 Audio Input. LRCLK/DSD5 Audio Input. Audio Return Channel for HDMI Tx2. Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control. Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM. Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM. Reset Pin. Crystal Input. PLL Digital Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Comparator Supply Voltage (1.8 V). Rx Clock Complement Input. Rx Channel 0 Complement Input. Rx Channel 1 Complement Input. Rx Channel 2 Complement Input. Comparator Supply Voltage (1.8 V). Resistor Current Setting for Encoder DACs: DAC1, DAC2, and DAC3. Place the RSET1 resistor as close as possible to the ADV8003. Optional External Voltage Reference Input for DACs or Voltage Reference Output. Place VREF voltage components as close as possible to the ADV8003. External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[5]). External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[6]). Vertical Sync for the OSD Input Port. S/PDIF/DSD0 Audio Input. I2S2/DSD3 Audio Input. Subcarrier Frequency Lock Signal (SFL). Audio Return Channel for HDMI Tx1. Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control. Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM. Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM. Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18; when the ALSB pin is set high, the I2C address is 0x1A. Crystal Input. PLL Analog Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Ground. Rx Clock True Input. Rx Channel 0 True Input. Rx Channel 1 True Input. Rx Channel 2 True Input. Ground. Compensation Pin. Connect a 2.2 nF capacitor from COMP1 to AVDD2. Encoder DAC4 Output. Rev. B | Page 20 of 64 Data Sheet ADV8003 Pin No. C1 Mnemonic OSD_IN[19]/EXT_DIN[3] C2 OSD_IN[20]/EXT_DIN[4] C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 D1 GND AUD_IN[4] DSD_CLK SCLK SCL SCK1 GND INT0 PDN GND GND NC NC RX_HPD AVDD1 GND GND AVDD1 AVDD1 DAC5 DAC6 OSD_IN[16]/EXT_DIN[0] D2 OSD_IN[17]/EXT_DIN[1] D3 OSD_IN[18]/EXT_DIN[2] D4 D5 D6 D7 D8 D9 D10 GND DVDD_IO MCLK SDA CS1 GND INT1 Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Audio input Audio input Audio input I2C control Serial port control GND Miscellaneous digital Miscellaneous digital GND GND N/A N/A Rx input Power GND GND Power Power Analog video output Analog video output OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Power Audio input I2C control Serial port control GND Miscellaneous digital D11 INT2 Miscellaneous digital D12 D13 D14 D15 D16 D17 D18 D19 DVDD_IO TEST1 NC NC RX_5V NC NC RTERM Power Miscellaneous digital N/A N/A Rx input N/A N/A HDMI Rx input D20 D21 D22 D23 AVDD2 AVDD2 DAC1 DAC2 Power Power Analog video output Analog video output Description External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[3]). External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[4]). Ground. I2S3/DSD4 Audio Input. DSD Audio Clock Input. I2S Bit Clock Input. I2C Clock Input. SCL is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Interrupt Pin 0. When status bits change, this pin is triggered. Power-Down. This pin controls the power state of the ADV8003. Ground. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Hot Plug Assert Signal Output for the Rx Input. HDMI Rx Inputs Analog Supply (3.3 V). Ground. Ground. HDMI Rx Inputs Analog Supply (3.3 V). HDMI Rx Inputs Analog Supply (3.3 V). Encoder DAC5 Output. Encoder DAC6 Output. External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[0]). External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[1]). External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[2]). Ground. Digital Interface Supply (3.3 V). MCLK for S/PDIF Input Audio. I2C Data Input. SDA is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Chip Select (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Interrupt Pin for HDMI Transmitter Outputs. When status bits change, an interrupt is generated on this pin. Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt is generated on this pin. Digital Interface Supply (3.3 V). Test Pin. Float this pin. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. 5 V Detect Pin for the Rx Input. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. This pin sets internal termination resistance. Use a 500 Ω resistor between this pin and GND. Place the RTERM resistor as close as possible to the ADV8003. Analog Power Supply (3.3 V). Analog Power Supply (3.3 V). Encoder DAC1 Output. Encoder DAC2 Output. Rev. B | Page 21 of 64 ADV8003 Data Sheet Pin No. E1 Mnemonic OSD_IN[13]/VBI_SCK E2 OSD_IN[14]/VBI_MOSI E3 OSD_IN[15]/VBI_CS E4 E20 E21 E22 E23 F1 F2 F3 F4 DVDD_IO TEST2 GND COMP2 DAC3 OSD_IN[9] OSD_IN[10] OSD_IN[11] OSD_IN[12] F20 RSET2 Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital Power Miscellaneous analog GND Miscellaneous analog1 Analog video output OSD video input OSD video input OSD video input OSD video input/ miscellaneous digital Miscellaneous analog1 F21 F22 F23 G1 G2 G3 G4 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G20 G21 G22 G23 H1 H2 H3 H4 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H20 PVDD3 GND CEC1 OSD_IN[5] OSD_IN[6] OSD_IN[7] OSD_IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 GND AVDD3 OSD_IN[1] OSD_IN[2] OSD_IN[3] OSD_IN[4] GND GND GND GND GND GND GND GND GND GND GND GND Power GND HDMI Tx1 OSD video input OSD video input OSD video input OSD video input GND GND GND Power GND GND Power GND GND GND GND Miscellaneous analog1 Miscellaneous analog1 GND Power OSD video input OSD video input OSD video input OSD video input GND GND GND GND GND GND GND GND GND GND GND GND Description External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial Port (VBI_SCK). External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data Serial Port (VBI_MOSI). External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial Port (VBI_CS). Digital Interface Supply (3.3 V). Test Pin. Float this pin. Ground. Compensation Pin. Connect a 2.2 nF capacitor to AVDD2. Encoder DAC3 Output. External OSD Video Pixel Input Port (OSD_IN[9]). External OSD Video Pixel Input Port (OSD_IN[10]). External OSD Video Pixel Input Port (OSD_IN[11]). External OSD Video Pixel Input Port (OSD_IN[12]). Resistor Current Setting for Encoder DACs: DAC4, DAC5, and DAC6. Place the RSET2 resistor as close as possible to the ADV8003. PLL Supply (1.8 V). Ground. HDMI Tx1 Consumer Electronics Control (CEC). External OSD Video Pixel Input Port (OSD_IN[5]). External OSD Video Pixel Input Port (OSD_IN[6]). External OSD Video Pixel Input Port (OSD_IN[7]). External OSD Video Pixel Input Port (OSD_IN[8]). Ground. Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. External Loop Filter for PLL 1. Connect to PVDD3. External Loop Filter for PLL 2. Connect to PVDD3. Ground. HDMI Analog Power Supply (1.8 V). External OSD Video Pixel Input Port (OSD_IN[1]). External OSD Video Pixel Input Port (OSD_IN[2]). External OSD Video Pixel Input Port (OSD_IN[3]). External OSD Video Pixel Input Port (OSD_IN[4]). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 22 of 64 Data Sheet ADV8003 Pin No. H21 H22 H23 J1 J2 J3 J4 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J20 Mnemonic GND TX1_2+ TX1_2− DE HS OSD_HS OSD_IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD DDC1_SDA Type GND HDMI Tx1 HDMI Tx1 Digital video sync Digital video sync Digital video sync OSD video input Power GND GND GND GND GND GND GND GND GND Power HDMI Tx1 J21 J22 J23 K1 K2 K3 K4 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K20 GND TX1_1+ TX1_1− VS PCLK DVDD_IO DVDD_IO GND GND GND GND GND GND GND GND GND GND GND DDC1_SCL GND HDMI Tx1 HDMI Tx1 Digital video sync Digital video sync Power Power GND GND GND GND GND GND GND GND GND GND GND HDMI Tx1 K21 K22 K23 L1 L2 L3 L4 L7 L8 L9 L10 L11 L12 L13 L14 L15 GND TX1_0+ TX1_0− P[32] P[33] P[34] P[35] DVDD GND GND GND GND GND GND GND GND GND HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND GND GND GND Description Ground. HDMI1 Channel 2 True Output. HDMI1 Channel 2 Complementary Output. Data Enable for Digital Input Video. Horizontal Sync for Digital Input Video. Horizontal Sync for the OSD Input Port (OSD_HS). External OSD Video Pixel Input Port (OSD_IN[0]). Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Digital Power Supply (1.8 V). HDCP Slave Serial Data for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI1 Channel 1 True Output. HDMI1 Channel 1 Complementary Output. Vertical Sync for Digital Input Video. Pixel Clock for Digital Input Video. Digital Interface Supply (3.3 V). Digital Interface Supply (3.3 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDCP Slave Serial Clock for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI1 Channel 0 True Output. HDMI1 Channel 0 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 23 of 64 ADV8003 Data Sheet Pin No. L16 L17 L20 L21 L22 L23 M1 M2 M3 M4 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M20 Mnemonic GND GND HPD_TX1 GND TX1_C+ TX1_C− P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND R_TX1 Type GND GND HDMI Tx1 GND HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND HDMI Tx11 M21 M22 M23 N1 N2 N3 N4 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N20 N21 N22 N23 P1 P2 P3 P4 P7 P8 P9 P10 P11 P12 P13 PVDD5 HEAC_1+ HEAC_1− P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND CEC2 PVDD5 AVDD3 NC P[20] P[21] P[22] P[23] DVDD GND GND GND GND GND GND Power1 HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND HDMI Tx2 Power1 Power N/A Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND GND Description Ground. Ground. Hot Plug Assert Signal Input for HDMI Tx1. Ground. HDMI1 Clock True Output. HDMI1 Clock Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Sets Internal Reference Currents. Place a 470 Ω resistor (1% tolerance) between this pin and ground, as close as possible to the ADV8003. HDMI Tx PLL Power Supply (1.8 V). HDMI Tx1 HEAC+ from the HDMI Connector. HDMI Tx1 HEAC− from the HDMI Connector. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDMI Tx2 Consumer Electronics Control (CEC). HDMI Tx PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 24 of 64 Data Sheet ADV8003 Pin No. P14 P15 P16 P17 P20 Mnemonic GND GND GND DVDD DDC2_SCL Type GND GND GND Power HDMI Tx2 P21 P22 P23 R1 R2 R3 R4 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R20 GND TX2_2+ TX2_2− P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND DDC2_SDA GND HDMI Tx2 HDMI Tx2 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND HDMI Tx2 R21 R22 R23 T1 T2 T3 T4 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 T20 T21 T22 T23 U1 U2 U3 U4 U7 U8 U9 U10 GND TX2_1+ TX2_1− P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND HPD_TX2 GND TX2_0+ TX2_0− P[10] P[11] P[12] P[13] GND GND DVDD GND GND HDMI Tx2 HDMI Tx2 Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND GND GND HDMI Tx2 GND HDMI Tx2 HDMI Tx2 Digital video input Digital video input Digital video input Digital video input GND GND Power GND Description Ground. Ground. Ground. Digital Power Supply (1.8 V). HDCP Slave Serial Clock for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI2 Channel 2 True Output. HDMI2 Channel 2 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDCP Slave Serial Data for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI2 Channel 1 True Output. HDMI2 Channel 1 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Hot Plug Assert Signal Input for HDMI Tx2. Ground. HDMI2 Channel 0 True Output. HDMI2 Channel 0 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Digital Power Supply (1.8 V). Ground. Rev. B | Page 25 of 64 ADV8003 Data Sheet Pin No. U11 U12 U13 U14 U15 U16 U17 U20 Mnemonic GND DVDD GND GND DVDD GND GND R_TX2 Type GND Power GND GND Power GND GND HDMI Tx21 U21 U22 U23 V1 V2 V3 V4 V20 V21 V22 V23 W1 W2 W3 W4 W20 W21 W22 W23 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23 AA1 AA2 AA3 AA4 GND TX2_C+ TX2_C− P[6] P[7] P[8] P[9] GND PVDD6 HEAC_2+ HEAC_2− P[2] P[3] P[4] P[5] TEST3 PVDD6 AVDD3 NC P[0] P[1] DDR_DQS[2] GND DDR_DQ[23] DVDD_DDR DDR_DQS[3] GND DDR_A[11] DVDD_DDR DDR_A[4] GND DDR_CAS DVDD_DDR DDR_CK GND DDR_DQ[9] DVDD_DDR DDR_DQ[14] GND DDR_DQ[6] PVDD_DDR GND DDR_DQ[18] GND GND DDR_DQS[2] GND HDMI Tx21 HDMI Tx21 Digital video input Digital video input Digital video input Digital video input GND Power1 HDMI Tx2 HDMI Tx2 Digital video input Digital video input Digital video input Digital video input Miscellaneous digital Power1 Power N/A Digital video input Digital video input DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power GND DDR interface GND GND DDR interface Description Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Sets internal reference currents. Place a 470 Ω resistor (1% tolerance) between this pin and ground, as close as possible to the ADV8003. Ground. HDMI2 Clock True Output. HDMI2 Clock Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. HDMI Tx PLL Power Supply (1.8 V). HDMI Tx2 HEC+ from HDMI Connector. HDMI Tx2 HEC− from HDMI Connector. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Test Pin. Connect this pin to ground through a 0.1 µF capacitor. HDMI Tx PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Data Strobe for DDR Data Bytes[23:16]. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. Ground. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Ground. Column Address Strobe for DDR Memory. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Line. Interface to external RAM data lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface PLL Supply (1.8 V). Ground. Data Line. Interface to external RAM data lines. Ground. Ground. Data Strobe for DDR Data Bytes[23:16]. Rev. B | Page 26 of 64 Data Sheet ADV8003 Pin No. AA5 AA6 AA7 AA8 Mnemonic DDR_DQ[26] DVDD_DDR DDR_DQS[3] NC/GND Type DDR interface Power DDR interface No connect/GND AA9 AA10 AA11 AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 DDR_A[8] DVDD_DDR DDR_A[2] GND DDR_CS DVDD_DDR DDR_CK GND DDR_DQ[11] DVDD_DDR DDR_DM[1] DDR_DM[0] GND GND DDR_DQ[3] DDR_DQ[21] DDR_DQ[19] DDR_DQ[17] DDR_DM[2] DDR_DQ[30] DDR_DM[3] DDR_DQ[31] DDR_DQ[29] DDR_A[12] DDR_A[6] DDR_A[3] DDR_A[0] DDR_BA[0] DDR_RAS DDR_CKE DDR_DQ[12] DDR_DQS[1] DDR_DQ[8] DDR_DQ[13] DDR_DQ[0] DDR_DQ[5] DDR_DQS[0] DDR_DQ[4] DDR_DQ[16] DDR_DQ[20] DDR_DQ[22] DDR_DQ[25] DDR_DQ[28] DDR_DQ[27] DDR_DQ[24] DDR_A[9] DDR_A[5] DDR_A[7] DDR_A[1] DDR_A[10] DDR_BA[1] DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface DDR interface GND GND DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface Description Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. For new ADV8003 designs, do not connect to this pin. For designs that must maintain consistency with the ADV8002, this pin can be grounded. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Ground. DDR Chip Select. Interface to external DDR RAM chip selects. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Mask for Data Lines[15:8]. Data Mask for Data Lines[7:0]. Ground. Ground. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[23:16]. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[31:25]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Row Address Strobe for DDR Memory. Clock Enable for External DDR Memory. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Rev. B | Page 27 of 64 ADV8003 Pin No. AC14 AC15 AC16 AC17 AC18 AC19 AC20 AC21 AC22 AC23 1 Mnemonic DDR_BA[2] DDR_WE DDR_VREF DDR_DQ[10] DDR_DQS[1] DDR_DQ[15] DDR_DQ[7] DDR_DQ[2] DDR_DQS[0] DDR_DQ[1] Data Sheet Type DDR interface DDR interface DDR interface1 DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface Description Bank Address Line. Indicates which data bank to write/read from. Write Enable Signal for DDR RAM. Reference Voltage for DDR RAM. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Sensitive node. Careful layout is important. Keep the associated circuitry as close as possible to the ADV8003. Rev. B | Page 28 of 64 ADV8003 1 2 3 4 5 6 7 8 9 10 A OSD_ IN[23]/ EXT_ DIN[7] OSD_ DE OSD_ CLK/ EXT_ CLK AUD_ IN[1] AUD_ IN[2] AUD_ IN[5] TEST4 MOSI1 SCK2 CS2 B OSD_ IN[21]/ EXT_ DIN[5] OSD_ IN[22]/ EXT_ DIN[6] OSD_ VS AUD_ IN[0] AUD_ IN[3] SFL C OSD_ IN[19]/ EXT_ DIN[3] OSD_ IN[20]/ EXT_ DIN[4] GND AUD_ IN[4] DSD_ CLK SCLK SCL SCK1 GND INT0 PDN GND D OSD_ IN[16]/ EXT_ DIN[0] OSD_ IN[17]/ EXT_ DIN[1] OSD_ IN[18]/ EXT_ DIN[2] GND DVDD_ IO MCLK SDA CS1 GND INT1 INT2 DVDD_ IO E OSD_ OSD_ OSD_ IN[13]/ IN[14]/ IN[15]/ VBI_SCK VBI_MOSI VBI_CS 22 23 RX_2N CVDD1 NC NC A RX_CP RX_0P RX_1P RX_2P NC NC B RX_ HPD AVDD1 GND AVDD1 AVDD1 NC NC C RX_5V NC NC RTERM AVDD2 AVDD2 NC NC D DVDD_ IO TEST2 GND NC NC E NC PVDD3 GND CEC1 F GND AVDD3 G ARC1_ MISO1 OUT MOSI2 MISO2 11 12 13 14 15 NC NC NC NC GND GND NC NC TEST1 NC NC RESET XTALN PVDD2 ALSB XTALP PVDD1 16 17 18 19 CVDD1 RX_CN RX_0N RX_1N GND 20 21 GND F OSD_ IN[9] OSD_ IN[10] OSD_ IN[11] OSD_ IN[12] G OSD_ IN[5] OSD_ IN[6] OSD_ IN[7] OSD_ IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 H OSD_ IN[1] OSD_ IN[2] OSD_ IN[3] OSD_ IN[4] GND GND GND GND GND GND GND GND GND GND GND GND GND TX1_2+ TX1_2– H J DE HS OSD_ HS OSD_ IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD DDC1_ SDA GND TX1_1+ TX1_1– J GND DDC1_ SCL GND TX1_0+ TX1_0– K GND HPD_ TX1 GND TX1_C+ TX1_C– L HEAC_ HEAC_ PVDD5 1+ 1– M PVDD5 AVDD3 NC N K L VS P[32] PCLK P[33] DVDD_ DVDD_ IO IO P[34] GND DVDD P[35] GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND M P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND R_TX1 N P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND NC P P[20] P[21] P[22] P[23] DVDD GND GND GND GND GND GND GND GND GND DVDD NC GND NC NC P R P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC R T P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC T U P[10] P[11] P[12] P[13] GND GND DVDD GND GND DVDD GND GND DVDD GND GND NC GND NC NC U V P[6] P[7] P[8] P[9] GND PVDD6 NC NC V W P[2] P[3] P[4] P[5] TEST3 NC W DDR_ DVDD_ DDR_ DQ[23] DDR DQS[3] DDR_ DDR_ DVDD_ DDR_ DQS[2] DQ[26] DDR DQS[3] AB DDR_ DDR_ DDR_ DQ[21] DQ[19] DQ[17] AC DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9] 4 5 6 DDR_ DDR_ DQ[31] DQ[29] 7 DVDD_ DDR DDR_ CK GND DDR_ DVDD_ DQ[11] DDR DDR_ A[6] DDR_ A[3] DDR_ A[0] DDR_ BA[0] DDR_ RAS DDR_ CKE DDR_ DDR_ DQ[12] DQS[1] DDR_ A[5] DDR_ A[7] DDR_ A[1] DDR_ A[10] DDR_ BA[1] DDR_ BA[2] DDR_ WE DDR_ VREF 9 10 12 13 14 15 16 DDR_ A[12] GND 3 DDR_ CS DVDD_ DDR GND 2 GND DDR_ A[8] DDR_ DQ[18] 1 DDR_ A[2] NC/ GND AA DDR_ DM[3] GND DDR_ DQ[9] GND P[1] DDR_ DQ[30] DDR_ CK DDR_ A[4] P[0] DDR_ DM[2] GND DVDD_ DDR DVDD_ DDR Y GND DDR_ CAS DDR_ A[11] DDR_ DQS[2] 8 11 GND DDR_ DQ[6] PVDD_ DDR GND Y DDR_ DM[1] DDR_ DM[0] GND GND DDR_ DQ[3] AA DDR_ DQ[13] DDR_ DQ[0] DDR_ DQ[5] DDR_ DQS[0] DDR_ DQ[4] AB DDR_ DDR_ DDR_ DQ[10] DQS[1] DQ[15] DDR_ DQ[7] DDR_ DQ[2] DDR_ DQS[0] DDR_ DQ[1] AC 20 21 22 23 17 Figure 30. ADV8003KBCZ-8B and ADV8003KBCZ-7B Pin Configuration Rev. B | Page 29 of 64 DVDD_ DDR_ DQ[14] DDR PVDD6 AVDD3 DDR_ DQ[8] 18 19 10556-130 Data Sheet ADV8003 Data Sheet Table 7. ADV8003KBCZ-8B and ADV8003KBCZ-7B Pin Function Descriptions Pin No. A1 Mnemonic OSD_IN[23]/EXT_DIN[7] A2 A3 OSD_DE OSD_CLK/EXT_CLK Type OSD video input/ miscellaneous digital OSD video sync OSD video sync A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 AUD_IN[1] AUD_IN[2] AUD_IN[5] TEST4 MOSI1 SCK2 CS2 RESET XTALN PVDD2 Audio input Audio input Audio input Miscellaneous digital Serial port control Serial port control Serial port control Miscellaneous digital Miscellaneous digital 1 Power A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 B1 NC NC CVDD1 RX_CN RX_0N RX_1N RX_2N CVDD1 NC NC OSD_IN[21]/EXT_DIN[5] B2 OSD_IN[22]/EXT_DIN[6] B3 B4 B5 B6 B7 B8 B9 B10 B11 OSD_VS AUD_IN[0] AUD_IN[3] SFL ARC1_OUT MISO1 MOSI2 MISO2 ALSB N/A N/A Power Rx input Rx input Rx input Rx input Power N/A N/A OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video sync Audio input Audio input SFL Audio output Serial port control Serial port control Serial port control I2C control B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 XTALP PVDD1 NC NC GND RX_CP RX_0P RX_1P RX_2P GND NC NC Miscellaneous digital1 Power N/A N/A GND Rx input Rx input Rx input Rx input GND N/A N/A Description External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[7]). Data Enable for the OSD Input Port. Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data (EXT_CLK). I2S0/DSD1 Audio Input. I2S1/DSD2 Audio Input. LRCLK/DSD5 Audio Input. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control. Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM. Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM. Reset Pin. Crystal Input. PLL Digital Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Comparator Supply Voltage (1.8 V). Rx Clock Complement Input. Rx Channel 0 Complement Input. Rx Channel 1 Complement Input. Rx Channel 2 Complement Input. Comparator Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[5]). External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[6]). Vertical Sync for the OSD Input Port. S/PDIF or DSD0 Audio Input. I2S2/DSD3 Audio Input. Subcarrier Frequency Lock Signal (SFL). Audio Return Channel for HDMI Tx1. Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control. Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM. Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM. Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18; when the ALSB pin is set high, the I2C address is 0x1A. Crystal Input. PLL Analog Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Ground. Rx Clock True Input. Rx Channel 0 True Input. Rx Channel 1 True Input. Rx Channel 2 True Input. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Rev. B | Page 30 of 64 Data Sheet ADV8003 Pin No. C1 Mnemonic OSD_IN[19]/EXT_DIN[3] C2 OSD_IN[20]/EXT_DIN[4] C3 C4 C5 C6 C7 GND AUD_IN[4] DSD_CLK SCLK SCL C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 D1 SCK1 GND INT0 PDN GND GND NC NC RX_HPD AVDD1 GND GND AVDD1 AVDD1 NC NC OSD_IN[16]/EXT_DIN[0] D2 OSD_IN[17]/EXT_DIN[1] D3 OSD_IN[18]/EXT_DIN[2] D4 D5 D6 D7 GND DVDD_IO MCLK SDA Serial port control GND Miscellaneous digital Miscellaneous digital GND GND N/A N/A Rx input Power GND GND Power Power N/A N/A OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Power Audio input I2C control D8 D9 D10 CS1 GND INT1 Serial port control GND Miscellaneous digital D11 INT2 Miscellaneous digital D12 D13 D14 D15 D16 D17 D18 D19 DVDD_IO TEST1 NC NC RX_5V NC NC RTERM Power Miscellaneous digital N/A N/A Rx input N/A N/A HDMI Rx input D20 D21 D22 D23 AVDD2 AVDD2 NC NC Power Power N/A N/A Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Audio input Audio input Audio input I2C control Description External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[3]). External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[4]). Ground. I2S3/DSD4 Audio Input. DSD Audio Clock Input. I2S Bit Clock Input. I2C Clock Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Interrupt Pin 0. When status bits change, this pin is triggered. Power-Down. This pin controls the power state of the ADV8003. Ground. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Hot Plug Assert Signal Output for the Rx Input. HDMI Rx Inputs Analog Supply (3.3 V). Ground. Ground. HDMI Rx Inputs, Analog Supply (3.3 V). HDMI Rx Inputs, Analog Supply (3.3 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[0]). External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[1]). External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[2]). Ground. Digital Interface Supply (3.3 V). MCLK for S/PDIF Input Audio. I2C Data Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Chip Select (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Interrupt Pin for HDMI Transmitter Outputs. When status bits change, an interrupt is generated on this pin. Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt is generated on this pin. Digital Interface Supply (3.3 V). Test Pin. Float this pin. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. 5 V Detect Pin for the Rx Input. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. This pin sets internal termination resistance. Use a 500 Ω resistor between this pin and GND. Place the RTERM resistor as close as possible to the ADV8003. Analog Power Supply (3.3 V). Analog Power Supply (3.3 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Rev. B | Page 31 of 64 ADV8003 Pin No. E1 Mnemonic OSD_IN[13]/VBI_SCK E2 OSD_IN[14]/VBI_MOSI E3 OSD_IN[15]/VBI_CS E4 E20 E21 E22 E23 F1 F2 F3 F4 DVDD_IO TEST2 GND NC NC OSD_IN[9] OSD_IN[10] OSD_IN[11] OSD_IN[12] F20 F21 F22 F23 G1 G2 G3 G4 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G20 G21 G22 G23 H1 H2 H3 H4 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H20 H21 NC PVDD3 GND CEC1 OSD_IN[5] OSD_IN[6] OSD_IN[7] OSD_IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 GND AVDD3 OSD_IN[1] OSD_IN[2] OSD_IN[3] OSD_IN[4] GND GND GND GND GND GND GND GND GND GND GND GND GND Data Sheet Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital Power Miscellaneous analog GND N/A N/A OSD video input OSD video input OSD video input OSD video input/ miscellaneous digital N/A Power GND HDMI Tx1 OSD video input OSD video input OSD video input OSD video input GND GND GND Power GND GND Power GND GND GND GND Miscellaneous analog1 Miscellaneous analog1 GND Power OSD video input OSD video input OSD video input OSD video input GND GND GND GND GND GND GND GND GND GND GND GND GND Description External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial Port (VBI_SCK). External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data Serial Port (VBI_MOSI). External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial Port (VBI_CS). Digital Interface Supply (3.3 V). Test Pin. Float this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[9]). External OSD Video Pixel Input Port (OSD_IN[10]). External OSD Video Pixel Input Port (OSD_IN[11]). External OSD Video Pixel Input Port (OSD_IN[12]). No Connect. Do not connect to this pin. PLL Supply (1.8 V). Ground. HDMI Tx1 Consumer Electronics Control (CEC). External OSD Video Pixel Input Port (OSD_IN[5]). External OSD Video Pixel Input Port (OSD_IN[6]). External OSD Video Pixel Input Port (OSD_IN[7]). External OSD Video Pixel Input Port (OSD_IN[8]). Ground. Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. External Loop Filter for PLL 1. Connect to PVDD3. External Loop Filter for PLL 2. Connect to PVDD3. Ground. HDMI Analog Power Supply (1.8 V). External OSD Video Pixel Input Port (OSD_IN[1]). External OSD Video Pixel Input Port (OSD_IN[2]). External OSD Video Pixel Input Port (OSD_IN[3]). External OSD Video Pixel Input Port (OSD_IN[4]). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 32 of 64 Data Sheet ADV8003 Pin No. H22 H23 J1 J2 J3 J4 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J20 Mnemonic TX1_2+ TX1_2− DE HS OSD_HS OSD_IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD DDC1_SDA Type HDMI Tx1 HDMI Tx1 Digital video sync Digital video sync Digital video sync OSD video input Power GND GND GND GND GND GND GND GND GND Power HDMI Tx1 J21 J22 J23 K1 K2 K3 K4 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K20 GND TX1_1+ TX1_1− VS PCLK DVDD_IO DVDD_IO GND GND GND GND GND GND GND GND GND GND GND DDC1_SCL GND HDMI Tx1 HDMI Tx1 Digital video sync Digital video sync Power Power GND GND GND GND GND GND GND GND GND GND GND HDMI Tx1 K21 K22 K23 L1 L2 L3 L4 L7 L8 L9 L10 L11 L12 L13 L14 L15 GND TX1_0+ TX1_0− P[32] P[33] P[34] P[35] DVDD GND GND GND GND GND GND GND GND GND HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND GND GND GND Description HDMI1 Channel 2 True Output. HDMI1 Channel 2 Complementary Output. Data Enable for Digital Input Video. Horizontal Sync for Digital Input Video. Horizontal Sync for the OSD Input Port (OSD_HS). External OSD Video Pixel Input Port (OSD_IN[0]). Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Digital Power Supply (1.8 V). HDCP Slave Serial Data for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI1 Channel 1 True Output. HDMI1 Channel 1 Complementary Output. Vertical Sync for Digital Input Video. Pixel Clock for Digital Input Video. Digital Interface Supply (3.3 V). Digital Interface Supply (3.3 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDCP Slave Serial Clock for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI1 Channel 0 True Output. HDMI1 Channel 0 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 33 of 64 ADV8003 Data Sheet Pin No. L16 L17 L20 L21 L22 L23 M1 M2 M3 M4 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M20 Mnemonic GND GND HPD_TX1 GND TX1_C+ TX1_C− P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND R_TX1 Type GND GND HDMI Tx1 GND HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND HDMI Tx11 M21 M22 M23 N1 N2 N3 N4 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N20 N21 N22 N23 P1 P2 P3 P4 P7 P8 P9 P10 P11 P12 PVDD5 HEAC_1+ HEAC_1− P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND NC PVDD5 AVDD3 NC P[20] P[21] P[22] P[23] DVDD GND GND GND GND GND Power1 HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND N/A Power1 Power N/A Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND Description Ground. Ground. Hot Plug Assert Signal Input for HDMI Tx1. Ground. HDMI1 Clock True Output. HDMI1 Clock Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Sets internal reference currents. Place a 470 Ω resistor (1% tolerance) between this pin and ground, as close as possible to the ADV8003. HDMI Tx PLL Power Supply (1.8 V). HDMI Tx1 HEAC+ from HDMI Connector. HDMI Tx1 HEAC− from HDMI Connector. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. HDMI Tx PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Rev. B | Page 34 of 64 Data Sheet Pin No. P13 P14 P15 P16 P17 P20 P21 P22 P23 R1 R2 R3 R4 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R20 R21 R22 R23 T1 T2 T3 T4 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 T20 T21 T22 T23 U1 U2 U3 U4 U7 U8 U9 U10 Mnemonic GND GND GND GND DVDD NC GND NC NC P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC P[10] P[11] P[12] P[13] GND GND DVDD GND ADV8003 Type GND GND GND GND Power N/A GND N/A N/A Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND N/A GND N/A N/A Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND GND GND N/A GND N/A N/A Digital video input Digital video input Digital video input Digital video input GND GND Power GND Description Ground. Ground. Ground. Ground. Digital Power Supply (1.8 V). No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Digital Power Supply (1.8 V). Ground. Rev. B | Page 35 of 64 ADV8003 Pin No. U11 U12 U13 U14 U15 U16 U17 U20 U21 U22 U23 V1 V2 V3 V4 V20 V21 V22 V23 W1 W2 W3 W4 W20 W21 W22 W23 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23 AA1 AA2 AA3 AA4 AA5 Mnemonic GND DVDD GND GND DVDD GND GND NC GND NC NC P[6] P[7] P[8] P[9] GND PVDD6 NC NC P[2] P[3] P[4] P[5] TEST3 PVDD6 AVDD3 NC P[0] P[1] DDR_DQS[2] GND DDR_DQ[23] DVDD_DDR DDR_DQS[3] GND DDR_A[11] DVDD_DDR DDR_A[4] GND DDR_CAS DVDD_DDR DDR_CK GND DDR_DQ[9] DVDD_DDR DDR_DQ[14] GND DDR_DQ[6] PVDD_DDR GND DDR_DQ[18] GND GND DDR_DQS[2] DDR_DQ[26] Data Sheet Type GND Power GND GND Power GND GND N/A GND N/A N/A Digital video input Digital video input Digital video input Digital video input GND Power1 N/A N/A Digital video input Digital video input Digital video input Digital video input Miscellaneous digital Power1 Power N/A Digital video input Digital video input DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR Interface Power DDR interface GND DDR interface Power GND DDR interface GND GND DDR interface DDR interface Description Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. HDMI Tx PLL Power Supply (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Test Pin. Connect this pin to ground through a 0.1 µF capacitor. HDMI Tx PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Data Strobe for DDR Data Bytes[23:16]. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. Ground. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Ground. Column Address Strobe for DDR Memory. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Line. Interface to external RAM data lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface PLL Supply (1.8 V). Ground. Data Line. Interface to external RAM data lines. Ground. Ground. Data Strobe for DDR Data Bytes[23:16]. Data Line. Interface to external RAM data lines. Rev. B | Page 36 of 64 Data Sheet ADV8003 Pin No. AA6 AA7 AA8 Mnemonic DVDD_DDR DDR_DQS[3] NC/GND Type Power DDR interface No connect/GND AA9 AA10 AA11 AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 DDR_A[8] DVDD_DDR DDR_A[2] GND DDR_CS DVDD_DDR DDR_CK GND DDR_DQ[11] DVDD_DDR DDR_DM[1] DDR_DM[0] GND GND DDR_DQ[3] DDR_DQ[21] DDR_DQ[19] DDR_DQ[17] DDR_DM[2] DDR_DQ[30] DDR_DM[3] DDR_DQ[31] DDR_DQ[29] DDR_A[12] DDR_A[6] DDR_A[3] DDR_A[0] DDR_BA[0] DDR_RAS DDR_CKE DDR_DQ[12] DDR_DQS[1] DDR_DQ[8] DDR_DQ[13] DDR_DQ[0] DDR_DQ[5] DDR_DQS[0] DDR_DQ[4] DDR_DQ[16] DDR_DQ[20] DDR_DQ[22] DDR_DQ[25] DDR_DQ[28] DDR_DQ[27] DDR_DQ[24] DDR_A[9] DDR_A[5] DDR_A[7] DDR_A[1] DDR_A[10] DDR_BA[1] DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface DDR interface GND GND DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface Description DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. For new ADV8003 designs, do not connect to this pin. For designs that must maintain consistency with the ADV8002, this pin can be grounded. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Ground. DDR Chip Select. Interface to external DDR RAM chip selects. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Mask for Data Lines[15:8]. Data Mask for Data Lines[7:0]. Ground. Ground. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[23:16]. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[31:25]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Row Address Strobe for DDR Memory. Clock Enable for External DDR Memory. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Rev. B | Page 37 of 64 ADV8003 Pin No. AC14 AC15 AC16 AC17 AC18 AC19 AC20 AC21 AC22 AC23 1 Mnemonic DDR_BA[2] DDR_WE DDR_VREF DDR_DQ[10] DDR_DQS[1] DDR_DQ[15] DDR_DQ[7] DDR_DQ[2] DDR_DQS[0] DDR_DQ[1] Data Sheet Type DDR interface DDR interface DDR interface1 DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface Description Bank Address Line. Indicates which data bank to write/read from. Write Enable Signal for DDR RAM. Reference Voltage for DDR RAM. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Sensitive node. Careful layout is important. Keep the associated circuitry as close as possible to the ADV8003. Rev. B | Page 38 of 64 1 ADV8003 2 3 4 5 6 9 10 A OSD_ IN[23]/ EXT_ DIN[7] OSD_ DE OSD_ CLK/ EXT_ CLK AUD_ IN[1] AUD_ IN[2] AUD_ IN[5] ARC2_ OUT MOSI1 SCK2 CS2 B OSD_ IN[21]/ EXT_ DIN[5] OSD_ IN[22]/ EXT_ DIN[6] OSD_ VS AUD_ IN[0] AUD_ IN[3] SFL ARC1_ MISO1 OUT MOSI2 MISO2 C OSD_ IN[19]/ EXT_ DIN[3] OSD_ IN[20]/ EXT_ DIN[4] GND AUD_ IN[4] DSD_ CLK SCLK SCL SCK1 GND INT0 PDN GND D OSD_ IN[16]/ EXT_ DIN[0] OSD_ IN[17]/ EXT_ DIN[1] OSD_ IN[18]/ EXT_ DIN[2] GND DVDD_ IO MCLK SDA CS1 GND INT1 INT2 DVDD_ IO E OSD_ OSD_ OSD_ IN[13]/ IN[14]/ IN[15]/ VBI_SCK VBI_MOSI VBI_CS 7 8 11 12 13 14 15 22 23 NC NC RX_2N CVDD1 NC NC A NC NC GND RX_CP RX_0P RX_1P RX_2P NC NC B GND NC NC RX_ HPD AVDD1 GND AVDD1 AVDD1 NC NC C TEST1 NC NC RX_5V NC NC RTERM AVDD2 AVDD2 NC NC D DVDD_ IO TEST2 GND NC NC E NC PVDD3 GND CEC1 F GND AVDD3 G RESET XTALN PVDD2 ALSB XTALP PVDD1 16 17 18 19 CVDD1 RX_CN RX_0N RX_1N GND 20 21 GND F OSD_ IN[9] OSD_ IN[10] OSD_ IN[11] OSD_ IN[12] G OSD_ IN[5] OSD_ IN[6] OSD_ IN[7] OSD_ IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 H OSD_ IN[1] OSD_ IN[2] OSD_ IN[3] OSD_ IN[4] GND GND GND GND GND GND GND GND GND GND GND GND GND TX1_2+ TX1_2– H J DE HS OSD_ HS OSD_ IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD DDC1_ SDA GND TX1_1+ TX1_1– J GND DDC1_ SCL GND TX1_0+ TX1_0– K GND HPD_ TX1 GND TX1_C+ TX1_C– L R_TX1 HEAC_ HEAC_ PVDD5 1+ 1– M PVDD5 AVDD3 N K L VS P[32] PCLK P[33] DVDD_ DVDD_ IO IO P[34] GND DVDD P[35] GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND M P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND N P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND CEC2 GND TX2_2+ TX2_2– P NC P P[20] P[21] P[22] P[23] DVDD GND GND GND GND GND GND GND GND GND DVDD DDC2_ SCL R P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND DDC2_ SDA GND TX2_1+ TX2_1– R T P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND HPD_ TX2 GND TX2_0+ TX2_0– T U P[10] P[11] P[12] P[13] GND GND DVDD GND GND DVDD GND GND DVDD GND GND R_TX2 GND TX2_C+ TX2_C– U HEAC_ HEAC_ PVDD6 2+ 2– V V P[6] P[7] P[8] P[9] GND W P[2] P[3] P[4] P[5] TEST3 Y P[0] P[1] DDR_ DQS[2] AA DDR_ DQ[18] GND GND AB DDR_ DDR_ DDR_ DQ[21] DQ[19] DQ[17] AC DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9] 1 2 3 DDR_ DVDD_ DDR_ DQ[23] DDR DQS[3] DDR_ DDR_ DVDD_ DDR_ DQS[2] DQ[26] DDR DQS[3] GND DDR_ DM[2] 4 DDR_ DQ[30] 5 DDR_ DM[3] 6 DVDD_ DDR DDR_ CK GND DDR_ DQ[9] DDR_ A[2] GND DDR_ CS DVDD_ DDR DDR_ CK GND DDR_ DVDD_ DQ[11] DDR DDR_ A[6] DDR_ A[3] DDR_ A[0] DDR_ BA[0] DDR_ RAS DDR_ CKE DDR_ DDR_ DQ[12] DQS[1] DDR_ A[5] DDR_ A[7] DDR_ A[1] DDR_ A[10] DDR_ BA[1] DDR_ BA[2] DDR_ WE DDR_ VREF 9 10 12 13 14 15 16 GND DVDD_ DDR DDR_ A[4] NC/ GND DDR_ A[8] DVDD_ DDR DDR_ A[12] DDR_ DDR_ DQ[31] DQ[29] 7 GND DDR_ CAS DDR_ A[11] 8 11 Rev. B | Page 39 of 64 NC W GND DDR_ DQ[6] PVDD_ DDR GND Y DDR_ DM[1] DDR_ DM[0] GND GND DDR_ DQ[3] AA DDR_ DQ[13] DDR_ DQ[0] DDR_ DQ[5] DDR_ DQS[0] DDR_ DQ[4] AB DDR_ DDR_ DDR_ DQ[10] DQS[1] DQ[15] DDR_ DQ[7] DDR_ DQ[2] DDR_ DQS[0] DDR_ DQ[1] AC 20 21 22 23 17 Figure 31. ADV8003KBCZ-8C and ADV8003KBCZ-7C Pin Configuration DVDD_ DDR_ DQ[14] DDR PVDD6 AVDD3 DDR_ DQ[8] 18 19 10556-131 Data Sheet ADV8003 Data Sheet Table 8. ADV8003KBCZ-8C and ADV8003KBCZ-7C Pin Function Descriptions Pin No. A1 Mnemonic OSD_IN[23]/EXT_DIN[7] A2 A3 OSD_DE OSD_CLK/EXT_CLK Type OSD video input/ miscellaneous digital OSD video sync OSD video sync A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 AUD_IN[1] AUD_IN[2] AUD_IN[5] ARC2_OUT MOSI1 SCK2 CS2 RESET XTALN PVDD2 Audio input Audio input Audio input Audio output Serial port control Serial port control Serial port control Miscellaneous digital Miscellaneous digital 1 Power A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 B1 NC NC CVDD1 RX_CN RX_0N RX_1N RX_2N CVDD1 NC NC OSD_IN[21]/EXT_DIN[5] B2 OSD_IN[22]/EXT_DIN[6] B3 B4 B5 B6 B7 B8 B9 B10 B11 OSD_VS AUD_IN[0] AUD_IN[3] SFL ARC1_OUT MISO1 MOSI2 MISO2 ALSB N/A N/A Power Rx input Rx input Rx input Rx input Power N/A N/A OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video sync Audio input Audio input SFL Audio output Serial port control Serial port control Serial port control I2C control B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 XTALP PVDD1 NC NC GND RX_CP RX_0P RX_1P RX_2P GND NC NC Miscellaneous digital1 Power N/A N/A GND Rx input Rx input Rx input Rx input GND N/A N/A Description External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[7]). Data Enable for the OSD Input Port. Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data (EXT_CLK). I2S0/DSD1 Audio Input. I2S1/DSD2 Audio Input. LRCLK/DSD5 Audio Input. Audio Return Channel for HDMI Tx2. Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control. Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM. Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM. Reset Pin. Crystal Input. PLL Digital Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Comparator Supply Voltage (1.8 V). Rx Clock Complement Input. Rx Channel 0 Complement Input. Rx Channel 1 Complement Input. Rx Channel 2 Complement Input. Comparator Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[5]). External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[6]). Vertical Sync for the OSD Input Port. S/PDIF/DSD0 Audio Input. I2S2/DSD3 Audio Input. Subcarrier Frequency Lock Signal (SFL). Audio Return Channel for HDMI Tx1. Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control. Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM. Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM. Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18; when the ALSB pin is set high, the I2C address is 0x1A. Crystal Input. PLL Analog Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Ground. Rx Clock True Input. Rx Channel 0 True Input. Rx Channel 1 True Input. Rx Channel 2 True Input. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Rev. B | Page 40 of 64 Data Sheet ADV8003 Pin No. C1 Mnemonic OSD_IN[19]/EXT_DIN[3] C2 OSD_IN[20]/EXT_DIN[4] C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 D1 GND AUD_IN[4] DSD_CLK SCLK SCL SCK1 GND INT0 PDN GND GND NC NC RX_HPD AVDD1 GND GND AVDD1 AVDD1 NC NC OSD_IN[16]/EXT_DIN[0] D2 OSD_IN[17]/EXT_DIN[1] D3 OSD_IN[18]/EXT_DIN[2] D4 D5 D6 D7 D8 D9 D10 GND DVDD_IO MCLK SDA CS1 GND INT1 Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Audio input Audio input Audio input I2C control Serial port control GND Miscellaneous digital Miscellaneous digital GND GND N/A N/A Rx input Power GND GND Power Power N/A N/A OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Power Audio input I2C control Serial port control GND Miscellaneous digital D11 INT2 Miscellaneous digital D12 D13 D14 D15 D16 D17 D18 D19 DVDD_IO TEST1 NC NC RX_5V NC NC RTERM Power Miscellaneous digital N/A N/A Rx input N/A N/A HDMI Rx input D20 D21 D22 D23 AVDD2 AVDD2 NC NC Power Power N/A N/A Description External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[3]). External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[4]). Ground. I2S3/DSD4 Audio Input. DSD Audio Clock Input. I2S Bit Clock Input. I2C Clock Input. SCL is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Interrupt Pin 0. When status bits change, this pin is triggered. Power-Down. This pin controls the power state of the ADV8003. Ground. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Hot Plug Assert Signal Output for the Rx Input. HDMI Rx Inputs Analog Supply (3.3 V). Ground. Ground. HDMI Rx Inputs Analog Supply (3.3 V). HDMI Rx Inputs Analog Supply (3.3 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[0]). External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[1]). External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[2]). Ground. Digital Interface Supply (3.3 V). MCLK for S/PDIF Input Audio. I2C Data Input. SDA is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Chip Select (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Interrupt Pin for HDMI Transmitter Outputs. When status bits change, an interrupt is generated on this pin. Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt is generated on this pin. Digital Interface Supply (3.3 V). Test Pin. Float this pin. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. 5 V Detect Pin for the Rx Input. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. This pin sets internal termination resistance. Use a 500 Ω resistor between this pin and GND. Place the RTERM resistor as close as possible to the ADV8003. Analog Power Supply (3.3 V). Analog Power Supply (3.3 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Rev. B | Page 41 of 64 ADV8003 Pin No. E1 Mnemonic OSD_IN[13]/VBI_SCK E2 OSD_IN[14]/VBI_MOSI E3 OSD_IN[15]/VBI_CS E4 E20 E21 E22 E23 F1 F2 F3 F4 DVDD_IO TEST2 GND NC NC OSD_IN[9] OSD_IN[10] OSD_IN[11] OSD_IN[12] F20 F21 F22 F23 G1 G2 G3 G4 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G20 G21 G22 G23 H1 H2 H3 H4 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H20 H21 H22 NC PVDD3 GND CEC1 OSD_IN[5] OSD_IN[6] OSD_IN[7] OSD_IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 GND AVDD3 OSD_IN[1] OSD_IN[2] OSD_IN[3] OSD_IN[4] GND GND GND GND GND GND GND GND GND GND GND GND GND TX1_2+ Data Sheet Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital Power Miscellaneous analog GND N/A N/A OSD video input OSD video input OSD video input OSD video input/ miscellaneous digital N/A Power GND HDMI Tx1 OSD video input OSD video input OSD video input OSD video input GND GND GND Power GND GND Power GND GND GND GND Miscellaneous analog1 Miscellaneous analog1 GND Power OSD video input OSD video input OSD video input OSD video input GND GND GND GND GND GND GND GND GND GND GND GND GND HDMI Tx1 Description External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial Port (VBI_SCK). External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data Serial Port (VBI_MOSI). External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial Port (VBI_CS). Digital Interface Supply (3.3 V). Test Pin. Float this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[9]). External OSD Video Pixel Input Port (OSD_IN[10]). External OSD Video Pixel Input Port (OSD_IN[11]). External OSD Video Pixel Input Port (OSD_IN[12]). No Connect. Do not connect to this pin. PLL Supply (1.8 V). Ground. HDMI Tx1 Consumer Electronics Control (CEC). External OSD Video Pixel Input Port (OSD_IN[5]). External OSD Video Pixel Input Port (OSD_IN[6]). External OSD Video Pixel Input Port (OSD_IN[7]). External OSD Video Pixel Input Port (OSD_IN[8]). Ground. Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. External Loop Filter for PLL 1. Connect to PVDD3. External Loop Filter for PLL 2. Connect to PVDD3. Ground. HDMI Analog Power Supply (1.8 V). External OSD Video Pixel Input Port (OSD_IN[1]). External OSD Video Pixel Input Port (OSD_IN[2]). External OSD Video Pixel Input Port (OSD_IN[3]). External OSD Video Pixel Input Port (OSD_IN[4]). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDMI1 Channel 2 True Output. Rev. B | Page 42 of 64 Data Sheet ADV8003 Pin No. H23 J1 J2 J3 J4 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J20 Mnemonic TX1_2− DE HS OSD_HS OSD_IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD DDC1_SDA Type HDMI Tx1 Digital video sync Digital video sync Digital video sync OSD video input Power GND GND GND GND GND GND GND GND GND Power HDMI Tx1 J21 J22 J23 K1 K2 K3 K4 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K20 GND TX1_1+ TX1_1− VS PCLK DVDD_IO DVDD_IO GND GND GND GND GND GND GND GND GND GND GND DDC1_SCL GND HDMI Tx1 HDMI Tx1 Digital video sync Digital video sync Power Power GND GND GND GND GND GND GND GND GND GND GND HDMI Tx1 K21 K22 K23 L1 L2 L3 L4 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 GND TX1_0+ TX1_0− P[32] P[33] P[34] P[35] DVDD GND GND GND GND GND GND GND GND GND GND GND HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND GND GND GND GND GND Description HDMI1 Channel 2 Complementary Output. Data Enable for Digital Input Video. Horizontal Sync for Digital Input Video. Horizontal Sync for the OSD Input Port (OSD_HS). External OSD Video Pixel Input Port (OSD_IN[0]). Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Digital Power Supply (1.8 V). HDCP Slave Serial Data for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI1 Channel 1 True Output. HDMI1 Channel 1 Complementary Output. Vertical Sync for Digital Input Video. Pixel Clock for Digital Input Video. Digital Interface Supply (3.3 V). Digital Interface Supply (3.3 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDCP Slave Serial Clock for HDMI Tx1. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI1 Channel 0 True Output. HDMI1 Channel 0 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 43 of 64 ADV8003 Data Sheet Pin No. L20 L21 L22 L23 M1 M2 M3 M4 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M20 Mnemonic HPD_TX1 GND TX1_C+ TX1_C− P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND R_TX1 Type HDMI Tx1 GND HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND HDMI Tx11 M21 M22 M23 N1 N2 N3 N4 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N20 N21 N22 N23 P1 P2 P3 P4 P7 P8 P9 P10 P11 P12 P13 P14 P15 PVDD5 HEAC_1+ HEAC_1− P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND CEC2 PVDD5 AVDD3 NC P[20] P[21] P[22] P[23] DVDD GND GND GND GND GND GND GND GND Power1 HDMI Tx1 HDMI Tx1 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND HDMI Tx2 Power1 Power N/A Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND GND GND GND Description Hot Plug Assert Signal Input for HDMI Tx1. Ground. HDMI1 Clock True Output. HDMI1 Clock Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Sets Internal Reference Currents. Place a 470 Ω resistor (1% tolerance) between this pin and ground. The external resistor should be placed as close as possible to the ADV8003. HDMI Tx PLL Power Supply (1.8 V). HDMI Tx1 HEAC+ from HDMI Connector. HDMI Tx1 HEAC− from HDMI Connector. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDMI Tx2 Consumer Electronics Control (CEC). HDMI Tx PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 44 of 64 Data Sheet ADV8003 Pin No. P16 P17 P20 Mnemonic GND DVDD DDC2_SCL Type GND Power HDMI Tx2 P21 P22 P23 R1 R2 R3 R4 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R20 GND TX2_2+ TX2_2− P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND DDC2_SDA GND HDMI Tx2 HDMI Tx2 Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND HDMI Tx2 R21 R22 R23 T1 T2 T3 T4 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 T20 T21 T22 T23 U1 U2 U3 U4 U7 U8 U9 U10 U11 U12 GND TX2_1+ TX2_1− P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND HPD_TX2 GND TX2_0+ TX2_0− P[10] P[11] P[12] P[13] GND GND DVDD GND GND DVDD GND HDMI Tx2 HDMI Tx2 Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND GND GND HDMI Tx2 GND HDMI Tx2 HDMI Tx2 Digital video input Digital video input Digital video input Digital video input GND GND Power GND GND Power Description Ground. Digital Power Supply (1.8 V). HDCP Slave Serial Clock for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI2 Channel 2 True Output. HDMI2 Channel 2 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. HDCP Slave Serial Data for HDMI Tx2. This pin is open drain; use a 2 kΩ resistor to connect this pin to the HDMI Tx 5 V supply. Ground. HDMI2 Channel 1 True Output. HDMI2 Channel 1 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Hot Plug Assert Signal Input for HDMI Tx2. Ground. HDMI2 Channel 0 True Output. HDMI2 Channel 0 Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Rev. B | Page 45 of 64 ADV8003 Data Sheet Pin No. U13 U14 U15 U16 U17 U20 Mnemonic GND GND DVDD GND GND R_TX2 Type GND GND Power GND GND HDMI Tx21 U21 U22 U23 V1 V2 V3 V4 V20 V21 V22 V23 W1 W2 W3 W4 W20 W21 W22 W23 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23 AA1 AA2 AA3 AA4 AA5 AA6 AA7 GND TX2_C+ TX2_C− P[6] P[7] P[8] P[9] GND PVDD6 HEAC_2+ HEAC_2− P[2] P[3] P[4] P[5] TEST3 PVDD6 AVDD3 NC P[0] P[1] DDR_DQS[2] GND DDR_DQ[23] DVDD_DDR DDR_DQS[3] GND DDR_A[11] DVDD_DDR DDR_A[4] GND DDR_CAS DVDD_DDR DDR_CK GND DDR_DQ[9] DVDD_DDR DDR_DQ[14] GND DDR_DQ[6] PVDD_DDR GND DDR_DQ[18] GND GND DDR_DQS[2] DDR_DQ[26] DVDD_DDR DDR_DQS[3] GND HDMI Tx2 HDMI Tx2 Digital video input Digital video input Digital video input Digital video input GND Power1 HDMI Tx2 HDMI Tx2 Digital video input Digital video input Digital video input Digital video input Miscellaneous digital Power1 Power N/A Digital video input Digital video input DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR Interface Power DDR interface GND DDR interface Power GND DDR interface GND GND DDR interface DDR interface Power DDR interface Description Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Sets internal reference currents. Place a 470 Ω resistor (1% tolerance) between this pin and ground, as close as possible to the ADV8003. Ground. HDMI2 Clock True Output. HDMI2 Clock Complementary Output. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. HDMI Tx PLL Power Supply (1.8 V). HDMI Tx2 HEC+ from the HDMI Connector. HDMI Tx2 HEC− from the HDMI Connector. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Test Pin. Connect this pin to ground through a 0.1 µF capacitor. HDMI Tx PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Data Strobe for DDR Data Bytes[23:16]. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. Ground. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Ground. Column Address Strobe for DDR Memory. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Line. Interface to external RAM data lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface PLL Supply (1.8 V). Ground. Data Line. Interface to external RAM data lines. Ground. Ground. Data Strobe for DDR Data Bytes[23:16]. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. Rev. B | Page 46 of 64 Data Sheet ADV8003 Pin No. AA8 Mnemonic NC/GND Type No connect/GND AA9 AA10 AA11 AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 AC14 AC15 AC16 DDR_A[8] DVDD_DDR DDR_A[2] GND DDR_CS DVDD_DDR DDR_CK GND DDR_DQ[11] DVDD_DDR DDR_DM[1] DDR_DM[0] GND GND DDR_DQ[3] DDR_DQ[21] DDR_DQ[19] DDR_DQ[17] DDR_DM[2] DDR_DQ[30] DDR_DM[3] DDR_DQ[31] DDR_DQ[29] DDR_A[12] DDR_A[6] DDR_A[3] DDR_A[0] DDR_BA[0] DDR_RAS DDR_CKE DDR_DQ[12] DDR_DQS[1] DDR_DQ[8] DDR_DQ[13] DDR_DQ[0] DDR_DQ[5] DDR_DQS[0] DDR_DQ[4] DDR_DQ[16] DDR_DQ[20] DDR_DQ[22] DDR_DQ[25] DDR_DQ[28] DDR_DQ[27] DDR_DQ[24] DDR_A[9] DDR_A[5] DDR_A[7] DDR_A[1] DDR_A[10] DDR_BA[1] DDR_BA[2] DDR_WE DDR_VREF DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface DDR interface GND GND DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface1 Description For new ADV8003 designs, do not connect to this pin. For designs that must maintain consistency with the ADV8002, this pin can be grounded. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Ground. DDR Chip Select. Interface to external DDR RAM chip selects. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Mask for Data Lines[15:8]. Data Mask for Data Lines[7:0]. Ground. Ground. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[23:16]. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[31:25]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Row Address Strobe for DDR Memory. Clock Enable for External DDR Memory. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Bank Address Line. Indicates which data bank to write/read from. Write Enable Signal for DDR RAM. Reference Voltage for DDR RAM. Rev. B | Page 47 of 64 ADV8003 Pin No. AC17 AC18 AC19 AC20 AC21 AC22 AC23 1 Mnemonic DDR_DQ[10] DDR_DQS[1] DDR_DQ[15] DDR_DQ[7] DDR_DQ[2] DDR_DQS[0] DDR_DQ[1] Data Sheet Type DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface Description Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Sensitive node. Careful layout is important. Keep the associated circuitry as close as possible to the ADV8003. Rev. B | Page 48 of 64 ADV8003 1 2 3 4 5 A OSD_ IN[23]/ EXT_ DIN[7] OSD_ DE OSD_ CLK/ EXT_ CLK TEST4 TEST5 B OSD_ IN[21]/ EXT_ DIN[5] OSD_ IN[22]/ EXT_ DIN[6] OSD_ VS TEST8 TEST9 TEST10 TEST11 MISO1 C OSD_ IN[19]/ EXT_ DIN[3] OSD_ IN[20]/ EXT_ DIN[4] GND D OSD_ IN[16]/ EXT_ DIN[0] OSD_ IN[17]/ EXT_ DIN[1] OSD_ IN[18]/ EXT_ DIN[2] E OSD_ OSD_ OSD_ IN[13]/ IN[14]/ IN[15]/ VBI_SCK VBI_MOSI VBI_CS 6 7 22 23 RX_2N CVDD1 NC NC A RX_CP RX_0P RX_1P RX_2P NC NC B AVDD1 AVDD1 NC NC C RTERM AVDD2 AVDD2 NC NC D DVDD_ IO TEST2 GND NC NC E NC PVDD3 GND NC F TEST6 TEST7 8 9 10 MOSI1 SCK2 CS2 MOSI2 MISO2 11 12 13 RESET XTALN PVDD2 ALSB XTALP PVDD1 14 15 16 NC NC NC NC GND 17 18 CVDD1 RX_CN RX_0N RX_1N TEST12 TEST13 TEST14 SCL SCK1 GND INT0 PDN GND GND NC NC RX_ HPD AVDD1 GND DVDD_ TEST15 IO SDA CS1 GND TEST16 INT2 DVDD_ IO TEST1 NC NC RX_5V NC NC GND 19 GND 20 21 GND F OSD_ IN[9] OSD_ IN[10] OSD_ IN[11] OSD_ IN[12] G OSD_ IN[5] OSD_ IN[6] OSD_ IN[7] OSD_ IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 GND AVDD3 G H OSD_ IN[1] OSD_ IN[2] OSD_ IN[3] OSD_ IN[4] GND GND GND GND GND GND GND GND GND GND GND GND GND NC NC H J DE HS OSD_ HS OSD_ IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD NC GND NC NC J DVDD_ DVDD_ IO IO GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC K K VS PCLK L P[32] P[33] P[34] P[35] DVDD GND GND GND GND GND GND GND GND GND GND NC GND NC NC L M P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND NC PVDD5 NC NC M N P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND NC PVDD5 AVDD3 NC N P P[20] P[21] P[22] P[23] DVDD GND GND GND GND GND GND GND GND GND DVDD NC GND NC NC P R P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC R T P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC T U P[10] P[11] P[12] P[13] GND GND DVDD GND GND DVDD GND GND DVDD GND GND NC GND NC NC U V P[6] P[7] P[8] P[9] GND PVDD6 NC NC V W P[2] P[3] P[4] P[5] TEST3 NC W Y P[0] P[1] DDR_ DQS[2] AA DDR_ DQ[18] GND GND AB DDR_ DDR_ DDR_ DQ[21] DQ[19] DQ[17] AC DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DDR_ DQ[16] DQ[20] DQ[22] DQ[25] DQ[28] DQ[27] DQ[24] A[9] 1 2 3 DDR_ DVDD_ DDR_ DQ[23] DDR DQS[3] DDR_ DDR_ DVDD_ DDR_ DQS[2] DQ[26] DDR DQS[3] GND DDR_ DM[2] 4 DDR_ DQ[30] 5 DDR_ DM[3] 6 DVDD_ DDR DDR_ CK GND DDR_ DQ[9] DDR_ A[2] GND DDR_ CS DVDD_ DDR DDR_ CK GND DDR_ DVDD_ DQ[11] DDR DDR_ A[6] DDR_ A[3] DDR_ A[0] DDR_ BA[0] DDR_ RAS DDR_ CKE DDR_ DDR_ DQ[12] DQS[1] DDR_ A[5] DDR_ A[7] DDR_ A[1] DDR_ A[10] DDR_ BA[1] DDR_ BA[2] DDR_ WE DDR_ VREF 9 10 12 13 14 15 16 GND DVDD_ DDR DDR_ A[4] NC/ GND DDR_ A[8] DVDD_ DDR DDR_ A[12] DDR_ DDR_ DQ[31] DQ[29] 7 GND DDR_ CAS DDR_ A[11] 8 11 Figure 32. ADV8003KBCZ-7T Pin Configuration Rev. B | Page 49 of 64 GND DDR_ DQ[6] PVDD_ DDR GND Y DDR_ DM[1] DDR_ DM[0] GND GND DDR_ DQ[3] AA DDR_ DQ[13] DDR_ DQ[0] DDR_ DQ[5] DDR_ DQS[0] DDR_ DQ[4] AB DDR_ DDR_ DDR_ DQ[10] DQS[1] DQ[15] DDR_ DQ[7] DDR_ DQ[2] DDR_ DQS[0] DDR_ DQ[1] AC 20 21 22 23 17 DVDD_ DDR_ DQ[14] DDR PVDD6 AVDD3 DDR_ DQ[8] 18 19 10556-132 Data Sheet ADV8003 Data Sheet Table 9. ADV8003KBCZ-7T Pin Function Descriptions Pin No. A1 Mnemonic OSD_IN[23]/EXT_DIN[7] Type OSD video input/ miscellaneous digital OSD video sync OSD video sync A2 A3 OSD_DE OSD_CLK/EXT_CLK A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 B1 TEST4 TEST5 TEST6 TEST7 MOSI1 SCK2 CS2 RESET XTALN PVDD2 NC NC CVDD1 RX_CN RX_0N RX_1N RX_2N CVDD1 NC NC OSD_IN[21]/EXT_DIN[5] B2 OSD_IN[22]/EXT_DIN[6] B3 B4 B5 B6 B7 B8 B9 B10 B11 OSD_VS TEST8 TEST9 TEST10 TEST11 MISO1 MOSI2 MISO2 ALSB Miscellaneous digital1 Power N/A N/A Power Rx input Rx input Rx input Rx input Power N/A N/A OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video sync Miscellaneous digital Miscellaneous digital Miscellaneous digital Miscellaneous digital Serial port control Serial port control Serial port control I2C control B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 XTALP PVDD1 NC NC GND RX_CP RX_0P RX_1P RX_2P GND NC NC Miscellaneous digital 1 Power N/A N/A GND Rx input Rx input Rx input Rx input GND N/A N/A Miscellaneous digital Miscellaneous digital Miscellaneous digital Miscellaneous digital Serial port control Serial port control Serial port control Miscellaneous digital Description External OSD Video Pixel Input Port (OSD_IN[23])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[7]). Data Enable for the OSD Input Port. Pixel Clock for the OSD Input Port (OSD_CLK)/Pixel Clock for External Video Data (EXT_CLK). Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Master Out Slave In (Serial Port 1). Serial Port 1 is used for OSD control. Serial Clock (Serial Port 2). Serial Port 2 is used for the external flash ROM. Chip Select (Serial Port 2). Serial Port 2 is used for the external flash ROM. Reset Pin. Crystal Input. PLL Digital Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Comparator Supply Voltage (1.8 V). Rx Clock Complement Input. Rx Channel 0 Complement Input. Rx Channel 1 Complement Input. Rx Channel 2 Complement Input. Comparator Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[21])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[5]). External OSD Video Pixel Input Port (OSD_IN[22])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[6]). Vertical Sync for the OSD Input Port. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Master In Slave Out (Serial Port 1). Serial Port 1 is used for OSD control. Master Out Slave In (Serial Port 2). Serial Port 2 is used for the external flash ROM. Master In Slave Out (Serial Port 2). Serial Port 2 is used for the external flash ROM. Sets LSB of I2C address. When the ALSB pin is set low, the I2C address is 0x18; when the ALSB pin is set high, the I2C address is 0x1A. Crystal Input. PLL Analog Supply Voltage (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Ground. Rx Clock True Input. Rx Channel 0 True Input. Rx Channel 1 True Input. Rx Channel 2 True Input. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Rev. B | Page 50 of 64 Data Sheet ADV8003 Pin No. C1 Mnemonic OSD_IN[19]/EXT_DIN[3] Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Miscellaneous digital Miscellaneous digital Miscellaneous digital I2C control C2 OSD_IN[20]/EXT_DIN[4] C3 C4 C5 C6 C7 GND TEST12 TEST13 TEST14 SCL C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C19 C20 C21 C22 C23 D1 SCK1 GND INT0 PDN GND GND NC NC RX_HPD AVDD1 GND GND AVDD1 AVDD1 NC NC OSD_IN[16]/EXT_DIN[0] D2 OSD_IN[17]/EXT_DIN[1] D3 OSD_IN[18]/EXT_DIN[2] D4 D5 D6 D7 GND DVDD_IO TEST15 SDA Serial port control GND Miscellaneous digital Miscellaneous digital GND GND N/A N/A Rx input Power GND GND Power Power N/A N/A OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital GND Power Miscellaneous digital I2C control D8 D9 D10 D11 CS1 GND TEST16 INT2 Serial port control GND Miscellaneous digital Miscellaneous digital D12 D13 D14 D15 D16 D17 D18 D19 DVDD_IO TEST1 NC NC RX_5V NC NC RTERM Power Miscellaneous digital N/A N/A Rx input N/A N/A HDMI Rx input D20 D21 D22 D23 AVDD2 AVDD2 NC NC Power Power N/A N/A Description External OSD Video Pixel Input Port (OSD_IN[19])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[3]). External OSD Video Pixel Input Port (OSD_IN[20])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[4]). Ground. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. I2C Clock Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Serial Clock (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Interrupt Pin 0. When status bits change, this pin is triggered. Power-Down. This pin controls the power state of the ADV8003. Ground. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Hot Plug Assert Signal Output for the Rx Input. HDMI Rx Inputs Analog Supply (3.3 V). Ground. Ground. HDMI Rx Inputs Analog Supply (3.3 V). HDMI Rx Inputs Analog Supply (3.3 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[16])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[0]). External OSD Video Pixel Input Port (OSD_IN[17])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[1]). External OSD Video Pixel Input Port (OSD_IN[18])/Additional TTL Input for External CCIR 656 Video Data (EXT_DIN[2]). Ground. Digital Interface Supply (3.3 V). Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. I2C Data Input. This pin is open drain; use a 4.7 kΩ resistor to connect this pin to a 3.3 V supply. Chip Select (Serial Port 1). Serial Port 1 is used for OSD control. Ground. Test Pin. Connect this pin to ground through a 4.7 kΩ resistor. Interrupt Pin for HDMI Receiver Input Lines. When status bits change, an interrupt is generated on this pin. Digital Interface Supply (3.3 V). Test Pin. Float this pin. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. 5 V Detect Pin for the Rx Input. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. This pin sets internal termination resistance. Use a 500 Ω resistor between this pin and GND. Place the RTERM resistor as close as possible to the ADV8003. Analog Power Supply (3.3 V). Analog Power Supply (3.3 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Rev. B | Page 51 of 64 ADV8003 Pin No. E1 Mnemonic OSD_IN[13]/VBI_SCK E2 OSD_IN[14]/VBI_MOSI E3 OSD_IN[15]/VBI_CS E4 E20 E21 E22 E23 F1 F2 F3 F4 DVDD_IO TEST2 GND NC NC OSD_IN[9] OSD_IN[10] OSD_IN[11] OSD_IN[12] F20 F21 F22 F23 G1 G2 G3 G4 G7 G8 G9 G10 G11 G12 G13 G14 G15 G16 G17 G20 G21 G22 G23 H1 H2 H3 H4 H7 H8 H9 H10 H11 H12 H13 H14 H15 H16 H17 H20 H21 NC PVDD3 GND NC OSD_IN[5] OSD_IN[6] OSD_IN[7] OSD_IN[8] GND GND GND DVDD GND GND DVDD GND GND GND GND ELPF1 ELPF2 GND AVDD3 OSD_IN[1] OSD_IN[2] OSD_IN[3] OSD_IN[4] GND GND GND GND GND GND GND GND GND GND GND GND GND Data Sheet Type OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital OSD video input/ miscellaneous digital Power Miscellaneous analog GND N/A N/A OSD video input OSD video input OSD video input OSD video input/ miscellaneous digital N/A Power GND N/A OSD video input OSD video input OSD video input OSD video input GND GND GND Power GND GND Power GND GND GND GND Miscellaneous analog1 Miscellaneous analog1 GND Power OSD video input OSD video input OSD video input OSD video input GND GND GND GND GND GND GND GND GND GND GND GND GND Description External OSD Video Pixel Input Port (OSD_IN[13])/Serial Clock for VBI Data Serial Port (VBI_SCK). External OSD Video Pixel Input Port (OSD_IN[14])/Master Out Slave In for VBI Data Serial Port (VBI_MOSI). External OSD Video Pixel Input Port (OSD_IN[15])/Chip Select for VBI Data Serial Port (VBI_CS). Digital Interface Supply (3.3 V). Test Pin. Float this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[9]). External OSD Video Pixel Input Port (OSD_IN[10]). External OSD Video Pixel Input Port (OSD_IN[11]). External OSD Video Pixel Input Port (OSD_IN[11]). No Connect. Do not connect to this pin. PLL Supply (1.8 V). Ground. No Connect. Do not connect to this pin. External OSD Video Pixel Input Port (OSD_IN[5]). External OSD Video Pixel Input Port (OSD_IN[6]). External OSD Video Pixel Input Port (OSD_IN[7]). External OSD Video Pixel Input Port (OSD_IN[8]). Ground. Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. External Loop Filter for PLL 1. Connect to PVDD3. External Loop Filter for PLL 2. Connect to PVDD3. Ground. HDMI Analog Power Supply (1.8 V). External OSD Video Pixel Input Port (OSD_IN[1]). External OSD Video Pixel Input Port (OSD_IN[2]). External OSD Video Pixel Input Port (OSD_IN[3]). External OSD Video Pixel Input Port (OSD_IN[4]). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Rev. B | Page 52 of 64 Data Sheet Pin No. H22 H23 J1 J2 J3 J4 J7 J8 J9 J10 J11 J12 J13 J14 J15 J16 J17 J20 J21 J22 J23 K1 K2 K3 K4 K7 K8 K9 K10 K11 K12 K13 K14 K15 K16 K17 K20 K21 K22 K23 L1 L2 L3 L4 L7 L8 L9 L10 L11 L12 L13 L14 L15 L16 L17 L20 Mnemonic NC NC DE HS OSD_HS OSD_IN[0] DVDD GND GND GND GND GND GND GND GND GND DVDD NC GND NC NC VS PCLK DVDD_IO DVDD_IO GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC P[32] P[33] P[34] P[35] DVDD GND GND GND GND GND GND GND GND GND GND NC ADV8003 Type N/A N/A Digital video sync Digital video sync Digital video sync OSD video input Power GND GND GND GND GND GND GND GND GND Power N/A GND N/A N/A Digital video sync Digital video sync Power Power GND GND GND GND GND GND GND GND GND GND GND N/A GND N/A N/A Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND GND GND GND GND GND N/A Description No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Data Enable for Digital Input Video. Horizontal Sync for Digital Input Video. Horizontal Sync for the OSD Input Port (OSD_HS). External OSD Video Pixel Input Port (OSD_IN[0]). Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Digital Power Supply (1.8 V). No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Vertical Sync for Digital Input Video. Pixel Clock for Digital Input Video. Digital Interface Supply (3.3 V). Digital Interface Supply (3.3 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. Rev. B | Page 53 of 64 ADV8003 Pin No. L21 L22 L23 M1 M2 M3 M4 M7 M8 M9 M10 M11 M12 M13 M14 M15 M16 M17 M20 M21 M22 M23 N1 N2 N3 N4 N7 N8 N9 N10 N11 N12 N13 N14 N15 N16 N17 N20 N21 N22 N23 P1 P2 P3 P4 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 Mnemonic GND NC NC P[28] P[29] P[30] P[31] GND GND GND GND GND GND GND GND GND GND GND NC PVDD5 NC NC P[24] P[25] P[26] P[27] GND GND GND GND GND GND GND GND GND GND GND NC PVDD5 AVDD3 NC P[20] P[21] P[22] P[23] DVDD GND GND GND GND GND GND GND GND GND DVDD Data Sheet Type GND N/A N/A Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND N/A Power1 N/A N/A Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND N/A Power1 Power N/A Digital video input Digital video input Digital video input Digital video input Power GND GND GND GND GND GND GND GND GND Power Description Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. PLL Power Supply (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Power Supply (1.8 V). Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Digital Power Supply (1.8 V). Rev. B | Page 54 of 64 Data Sheet Pin No. P20 P21 P22 P23 R1 R2 R3 R4 R7 R8 R9 R10 R11 R12 R13 R14 R15 R16 R17 R20 R21 R22 R23 T1 T2 T3 T4 T7 T8 T9 T10 T11 T12 T13 T14 T15 T16 T17 T20 T21 T22 T23 U1 U2 U3 U4 U7 U8 U9 U10 U11 U12 U13 U14 U15 U16 Mnemonic NC GND NC NC P[16] P[17] P[18] P[19] GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC P[14] P[15] GND GND GND GND GND GND GND GND GND GND GND GND GND NC GND NC NC P[10] P[11] P[12] P[13] GND GND DVDD GND GND DVDD GND GND DVDD GND ADV8003 Type N/A GND N/A N/A Digital video input Digital video input Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND N/A GND N/A N/A Digital video input Digital video input GND GND GND GND GND GND GND GND GND GND GND GND GND N/A GND N/A N/A Digital video input Digital video input Digital video input Digital video input GND GND Power GND GND Power GND GND Power GND Description No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. Ground. No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Ground. Digital Power Supply (1.8 V). Ground. Rev. B | Page 55 of 64 ADV8003 Data Sheet Pin No. U17 U20 U21 U22 U23 V1 V2 V3 V4 V20 V21 V22 V23 W1 W2 W3 W4 W20 W21 W22 W23 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 Y10 Y11 Y12 Y13 Y14 Y15 Y16 Y17 Y18 Y19 Y20 Y21 Y22 Y23 AA1 AA2 AA3 AA4 AA5 AA6 AA7 AA8 Mnemonic GND NC GND NC NC P[6] P[7] P[8] P[9] GND PVDD6 NC NC P[2] P[3] P[4] P[5] TEST3 PVDD6 AVDD3 NC P[0] P[1] DDR_DQS[2] GND DDR_DQ[23] DVDD_DDR DDR_DQS[3] GND DDR_A[11] DVDD_DDR DDR_A[4] GND DDR_CAS DVDD_DDR DDR_CK GND DDR_DQ[9] DVDD_DDR DDR_DQ[14] GND DDR_DQ[6] PVDD_DDR GND DDR_DQ[18] GND GND DDR_DQS[2] DDR_DQ[26] DVDD_DDR DDR_DQS[3] NC/GND Type GND N/A GND N/A N/A Digital video input Digital video input Digital video input Digital video input GND Power1 N/A N/A Digital video input Digital video input Digital video input Digital video input Miscellaneous digital Power1 Power N/A Digital video input Digital video input DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR interface Power DDR interface GND DDR Interface Power DDR interface GND DDR interface Power GND DDR interface GND GND DDR interface DDR interface Power DDR interface No connect/GND AA9 AA10 AA11 DDR_A[8] DVDD_DDR DDR_A[2] DDR interface Power DDR interface Description Ground. No Connect. Do not connect to this pin. Ground. No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Ground. PLL Power Supply (1.8 V). No Connect. Do not connect to this pin. No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Test Pin. Connect this pin to Ground through a 0.1 µF capacitor. PLL Power Supply (1.8 V). HDMI Analog Power Supply (1.8 V). No Connect. Do not connect to this pin. Digital Video Input Bus[35:0]. Digital Video Input Bus[35:0]. Data Strobe for DDR Data Bytes[23:16]. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. Ground. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Ground. Column Address Strobe for DDR Memory. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Line. Interface to external RAM data lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface PLL Supply (1.8 V). Ground. Data Line. Interface to external RAM data lines. Ground. Ground. Data Strobe for DDR Data Bytes[23:16]. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Strobe for DDR Data Bytes[31:24]. For new ADV8003 designs, do not connect to this pin. For designs that must maintain consistency with the ADV8002, this pin can be grounded. Address Line. Interface to external RAM address lines. DDR Interface Supply (1.8 V). Address Line. Interface to external RAM address lines. Rev. B | Page 56 of 64 Data Sheet Pin No. AA12 AA13 AA14 AA15 AA16 AA17 AA18 AA19 AA20 AA21 AA22 AA23 AB1 AB2 AB3 AB4 AB5 AB6 AB7 AB8 AB9 AB10 AB11 AB12 AB13 AB14 AB15 AB16 AB17 AB18 AB19 AB20 AB21 AB22 AB23 AC1 AC2 AC3 AC4 AC5 AC6 AC7 AC8 AC9 AC10 AC11 AC12 AC13 AC14 AC15 AC16 AC17 AC18 AC19 AC20 Mnemonic GND DDR_CS DVDD_DDR DDR_CK GND DDR_DQ[11] DVDD_DDR DDR_DM[1] DDR_DM[0] GND GND DDR_DQ[3] DDR_DQ[21] DDR_DQ[19] DDR_DQ[17] DDR_DM[2] DDR_DQ[30] DDR_DM[3] DDR_DQ[31] DDR_DQ[29] DDR_A[12] DDR_A[6] DDR_A[3] DDR_A[0] DDR_BA[0] DDR_RAS DDR_CKE DDR_DQ[12] DDR_DQS[1] DDR_DQ[8] DDR_DQ[13] DDR_DQ[0] DDR_DQ[5] DDR_DQS[0] DDR_DQ[4] DDR_DQ[16] DDR_DQ[20] DDR_DQ[22] DDR_DQ[25] DDR_DQ[28] DDR_DQ[27] DDR_DQ[24] DDR_A[9] DDR_A[5] DDR_A[7] DDR_A[1] DDR_A[10] DDR_BA[1] DDR_BA[2] DDR_WE DDR_VREF DDR_DQ[10] DDR_DQS[1] DDR_DQ[15] DDR_DQ[7] ADV8003 Type GND DDR interface Power DDR interface GND DDR interface Power DDR interface DDR interface GND GND DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface DDR interface1 DDR interface DDR interface DDR interface DDR interface Description Ground. DDR Chip Select. Interface to external DDR RAM chip selects. DDR Interface Supply (1.8 V). DDR Memory Clock. Interface to external DDR RAM clock lines. Ground. Data Line. Interface to external RAM data lines. DDR Interface Supply (1.8 V). Data Mask for Data Lines[15:8]. Data Mask for Data Lines[7:0]. Ground. Ground. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[23:16]. Data Line. Interface to external RAM data lines. Data Mask for Data Lines[31:25]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Row Address Strobe for DDR Memory. Clock Enable for External DDR Memory. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Address Line. Interface to external RAM address lines. Bank Address Line. Indicates which data bank to write/read from. Bank Address Line. Indicates which data bank to write/read from. Write Enable Signal for DDR RAM. Reference Voltage for DDR RAM. Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[15:8]. Data Line. Interface to external RAM data lines. Data Line. Interface to external RAM data lines. Rev. B | Page 57 of 64 ADV8003 Pin No. AC21 AC22 AC23 1 Mnemonic DDR_DQ[2] DDR_DQS[0] DDR_DQ[1] Data Sheet Type DDR interface DDR interface DDR interface Description Data Line. Interface to external RAM data lines. Data Strobe for DDR Data Bytes[7:0]. Data Line. Interface to external RAM data lines. Sensitive node. Careful layout is important. The associated circuitry should be kept as close as possible to the ADV8003. Rev. B | Page 58 of 64 Data Sheet ADV8003 DESIGN CONSIDERATIONS POWER-UP SEQUENCE THERMAL CONSIDERATIONS The power-up sequence of the ADV8003 is as follows: The thermal performance of the ADV8003 is influenced by a number of factors, for example, power dissipation of the ADV8003, PCB design, and ambient temperature. 1. 2. 3. 4. 5. 6. Hold the RESET and PDN pins low. Bring up the 3.3 V supplies (DVDD_IO, AVDD1, AVDD2). A minimum delay of 20 ms is required from the point at which the 3.3 V reaches its minimum recommended value (that is, 3.14 V) before powering up the 1.8 V supplies. Bring up the 1.8 V supplies (DVDD, PVDD1, PVDD2, PVDD3, PVDD5, PVDD6, CVDD1, AVDD3, DVDD_DDR, PVDD_DDR). These should be powered up together. That is, there should be a difference of less than 0.3 V between them. RESET can be pulled high after supplies have been powered up. A complete reset is recommended after power-up. This can be performed by the system microcontroller. PDN (C11) These factors, allied to any other application-specific factors that may affect the thermal performance of ADV8003, must be considered to ensure that the junction temperature of the ADV8003 does not exceed 125°C. The flexibility of the ADV8003 can, in theory, result in the part being configured in modes where the junction temperature exceeds the maximum rated specification. To ensure that this does not happen, the ADV8003 must be characterized on the final customer PCB to ensure that maximum rated specifications are not exceeded in the planned modes of operation. Using fewer internal layers on a PCB reduces the amount of thermal conductivity between the ADV8003 and the PCB itself. This may necessitate some thermal management effort or affect the modes in which the ADV8003 can be configured. Calculate thermal conductivity as follows: 0V 1. 3.3V RESET (A11) 2. 3. 0V 1.8V TJ = TC + 5°C 1.8V SUPPLY TJ MAX = TA MAX − TA (actual) + TC (actual) + 5°C TPSS ≥ 20ms RESET > 5ms 0V Figure 33. Supply Power-Up Sequence 10556-026 0V 3.3V 3.14V 3.3V SUPPLY Configure the ADV8003 in the highest required power mode of operation. Measure the ambient temperature of the enclosure. Measure the case temperature at the top of the ADV8003. where: TJ is the junction temperature (inside the ADV8003). TC is the case temperature (top surface of the ADV8003). TA is the ambient temperature (in the locality of the ADV8003). Maximum specified TA MAX for the ADV8003 is 70°C. Depending on the result of the previous calculations/ measurement for the specific system, a lower TA MAX limit may need to be specified for that system to ensure that TJ MAX remains safely below 125°C. Rev. B | Page 59 of 64 ADV8003 Data Sheet FUNCTIONAL OVERVIEW VIDEO INPUT OSD can be placed at numerous locations within the signal chain to vary the number of outputs on which the OSD is displayed. PiP can also be supported via the OSD block, using a pixel port input that is connected to the OSD block. Several modes of operation are defined to help the user quickly integrate the ADV8003 into a system. 4-BIT VBI 24-BIT VIDEO 12-BIT VIDEO CORE 48-BIT VIDEO LOW ANGLE PROCESSING 10556-027 SERIAL VIDEO RECEIVER VIDEO SIGNAL PROCESSOR (VSP) CADENCE DETECTION MOTION DETECTION Figure 34. Digital Video Interface The ADV8003 can receive data via the 48-bit input pixel port, the 24-bit OSD input port, or from the output of an HDMI transmitter. The 48-bit input pixel port can receive data from an upstream analog/HDMI front-end device such as the ADV7619. This bus can accept multiple input formats in both RGB and YPrPb color spaces. Double data rate (DDR) input formats are also supported. The 24-bit input pixel port can also receive video data from an upstream analog/HDMI front-end device such as the ADV7844 or OSD data from an external OSD generator. This bus can accept multiple input formats up to UXGA. DDR input formats are also supported. The video input on the 24-bit pixel port can be scaled and overlaid onto the main video path. The serial video receiver can accept the output of an HDMI transmitter such as the ADV7511, ADV7623 or ADV7850. Using this configuration, the transceiver can extract HDMI audio for processing before reinsertion the audio into the ADV8003 via the audio pins, for output through the HDMI transmitters. This input does not support EDID or HDCP operations. Flexible digital interface features include the following: • NOISE REDUCTION DUAL SCALER AND OSD BLEND FRC ENHANCE DE-INTERLACER Figure 35. Video Processing The ADV8003 offers video de-interlacing and scaling. The deinterlacer, located in the primary VSP, is motion adaptive and offers high performance on low angle edges. It can support input video resolutions of 480i, 576i, and 1080i. The dual scalers in the ADV8003 support the Analog Devices proprietary scaling algorithm, which provides very high quality video upscaling and downscaling. This scaling algorithm helps eradicate many of the common problems that are encountered when scaling video data, such as saw tooth, edge blurring, and ringing. The primary and secondary scalers are capable of up- and downscaling between a range of SD and HD video resolutions (for example, 480p, 576p, 720p, and 1080p). The primary scaler in the ADV8003KBCZ-8/ADV8003KBCZ-8B/ADV8003KBCZ-8C models is capable of upscaling to 4k × 2k video resolutions. Cadence detection and frame rate conversion are also supported in the ADV8003, which allows film formats to be displayed at their native frame rate, as well as being converted to the native refresh rate of the TV. Additional video processing in the ADV8003 helps with reduction of common video artifacts such as mosquito, random, and block noise. The ADV8003 also includes an aspect ratio converter, as well as a panorama mode feature. Picture-in-picture (PiP) support is possible when receiving video data on more than one of the video inputs, such as the 48-bit pixel port and the serial video receiver. • • CUE CORRECTION DETAIL ENHANCE 10556-028 8-BIT CCIR 656 (Up to) 48-bit pixel port for general video data (Up to) 24-bit pixel port for external OSD, if the ADV8003 internal OSD is not used Option to connect the output of HDMI transmitter FLEXIBLE DIGITAL CORE The ADV8003 has a flexible digital core that enables many different configurations of single, dual and triple video processing paths. Video processing can be placed first in the signal chain to ensure that all outputs are processed to the highest quality. The following VSP features are included: • • • • • Rev. B | Page 60 of 64 High performance motion adaptive SD/HD de-interlacer and scaler Two scalers, allowing independent scaling on ADV8003 outputs Frame rate converter, supporting conversion between multiple frame rates (23.976 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, and 60 Hz) Noise reduction, which helps with the reduction of random, block, and mosquito noise Five manually programmable color space converters that are distributed between inputs and outputs Data Sheet ADV8003 EXTERNAL OSD HDMI TRANSMITTERS DDR2 INTERNAL OSD GENERATOR OSD BUILD OSD SCALER OSD BLEND VIDEO 10556-029 ON-SCREEN DISPLAY (OSD) Figure 36. Bitmap OSD The ADV8003 incorporates a bitmap-based OSD block that allows users to create impressive OSD designs that can include bitmap images, as well as motion and animation. Individual regions of the OSD can be alpha blended and prioritized over other regions. An OSD development tool, Blimp, is provided to assist in the design and development of custom OSDs and to abstract the OSD hardware from the user. This tool automatically generates two design elements: a design resource containing character sets and images that must be downloaded to an external SPI flash on the board; and code that must be integrated with system APIs to link the functionality of the OSD with the functionality of the system. The OSD design resource is loaded into external DDR2 memories on power-up by the OSD coprocessor of the ADV8003. This coprocessor is responsible for handling upper level commands from the user and translating them into lower level operations for the OSD and DMA. OSD features include the following: • • Pixel-by-pixel alpha blending and priority levels assigned to the different OSD components A high performance OSD scaler allows the rendering of OSDs at a single resolution, as well as blending at different resolutions EXTERNAL DDR2 MEMORY FRAME RATE CONVERSION BITMAP OSD DATA 10556-030 VIDEO SCALING HDMI Tx features include the following: • • • • • Audio return channel (ARC) support Mandatory 3D formats and many optional 3D formats Content type bits CEC controller HDMI audio interface and support for multiple audio formats (S/PDIF, I2S, DSD) VIDEO ENCODER The ADV8003 features a high speed digital-to-analog video encoder. Six 12-bit NSV, 3.3 V video DACs provide support for worldwide composite (CVBS), S-Video (Y-C), and component (YPrPb/RGB) analog outputs in standard definition (SD), enhanced definition (ED), or high definition (HD) video formats. It is also possible to enable the video encoder of the ADV8003 to work in simultaneous modes where both an SD and ED/HD formats are output. Encoder features include the following: • • • • • • DDR2 INTERFACE MOTION ADAPTIVE DE-INTERLACER The ADV8003 features dual HDMI transmitters. The transmitters provided on the ADV8003KBCZ-8/ADV8003KBCZ-8B/ ADV8003KBCZ-8C support all HDTV formats up to 4k × 2k; the transmitters on the ADV8003KBCZ-7/ADV8003KBCZ-7B/ ADV8003KBCZ-7C/ADV8003KBCZ-7T support all HDTV formats up to 1080p. All parts support all of the mandatory and many of the optional 3D formats, and audio return channel (ARC), which allows an S/PDIF audio connection between the source and sink. Each HDMI transmitter features a full function CEC master and on-chip MPUs with DDC I2C masters to perform HDCP operations and EDID operations. Six 12-bit NSV video DACs capable of outputting video standards of up to 1080p with additional oversampling Multiformat video output support; composite (CVBS), S-Video (Y-C), component YPrPb (SD, ED and HD), and component RGB (SD, ED and HD) Simultaneous SD and ED/HD operation Copy generation management system (CGMS) Closed captioning and widescreen signaling (WSS) Rovi® Rev. 7.1.L1 (SD) and Rev. 1.4 (ED) compliant PROFESSIONAL CONFIGURATION Figure 37. External DDR2 Memory Interface External DDR2 memory is required for motion adaptive de-interlacing, scaling, frame rate conversion, and bitmap OSD overlay. The bandwidth of external memory required is determined by the input video formats that the ADV8003 must support, as well as the level of video processing required (scaling, conversion, and OSD). Depending on the input video resolution and video processing options, one or two DDR2 memories may be required. To accommodate professional applications where HDMI and analog video output are not desired, the ADV8003 offers a 30-bit TTL input, 30-bit TTL output mode. This mode suits applications where a video signal processor is required between two TTL interfaces (for example, an HDMI receiver and an FPGA). Rev. B | Page 61 of 64 ADV8003 Data Sheet REGISTER MAP ARCHITECTURE The registers of the ADV8003 are controlled via a 2-wire serial (I2C-compatible) interface. Addressing in the ADV8003 is 16-bit with 8-bit data. This means that I2C writes to the part are in the following form: , , , . For example, to write 0xFF to the encoder register map, which is Register 0xE4AF, the bytes sent over the I2C interface are: 0x1A, 0xE4, 0xAF, 0xFF. The addresses are outlined in Table 10. Figure 38 shows the register map architecture for the ADV8003. The ADV8003 also has a number of SPI register maps used for OSD functions. These are accessed through the APIs defined in the Blimp software tool. Table 10. ADV8003 I2C Address and Register Address Range for the Different HW Blocks Register Map Name IO Map I2C Address 0x1A (when the ALSB pin is set high) or 0x18 (when the ALSB pin is set low) Primary VSP Map 1 Primary VSP Map 2 Secondary VSP Map DPLL Map Rx Main Map Rx InfoFrame Map Encoder Map Tx1 Main Map Tx1 EDID Map Tx1 CEC Map Tx1 UDP Map Tx1 Test Map Tx2 Main Map Tx2 EDID Map Tx2 CEC Map Tx2 UDP Map Tx2 Test Map I2C ADDRESS 0x18/0x1A Register Address 0x1A00 to 0x1BFF 0xE800 to 0xE8FF 0xE900 to 0xE9FF 0xE600 to 0xE6FF 0xE000 to 0xE0FF 0xE200 to 0xE2FF 0xE300 to 0xE3FF 0xE400 to 0xE4FF 0xEC00 to 0xECFF 0xEE00 to 0xEEFF 0xF000 to 0xF0FF 0xF200 to 0xF2FF 0xF300 to 0xF3FF 0xF400 to 0xF4FF 0xF600 to 0xF6FF 0xF800 to 0xF8FF 0xFA00 to 0xFAFF 0xFB00 to 0xFBFF IO MAP PRIMARY VSP MAP 1 PRIMARY VSP MAP 2 SECONDARY VSP MAP DPLL MAP Rx MAIN MAP Rx INFOFRAME MAP ENCODER MAP Tx1 TEST MAP 0x1A00 TO 0x1BFF 0xE800 TO 0xE8FF 0xE900 TO 0xE9FF 0xE600 TO 0xE6FF 0xE000 TO 0xE0FF 0xE200 TO 0xE2FF 0xE300 TO 0xE3FF 0xE400 TO 0xE4FF 0xF300 TO 0xF3FF 0xEC00 TO 0xECFF 0xEE00 TO 0xEEFF 0xF000 TO 0xF0FF 0xF200 TO 0xF2FF 0xF400 TO 0xF4FF 0xF600 TO 0xF6FF 0xF800 TO 0xF8FF 0xFA00 TO 0xFAFF 0xFB00 TO 0xFBFF Tx1 MAIN MAP Tx1 EDID MAP Tx1 CEC MAP Tx1 UDP MAP Tx2 MAIN MAP Tx2 EDID MAP Tx2 CEC MAP Tx2 UDP MAP Tx2 TEST MAP Figure 38. Register Map Architecture Rev. B | Page 62 of 64 10556-031 SCL SDA Data Sheet ADV8003 TYPICAL APPLICATIONS DIAGRAM SPI FLASH SYSTEM MCU HDMI 60-BIT INPUT COMPOSITE S-VIDEO COMPONENT HDMI VIDEO 48-BIT INPUT VIDEO DECODER/ HDMI Rx (FOR EXAMPLE, ADV7844) SERIAL VIDEO RECEIVER HDMI HDMI HDMI HDMI HDMI DDR2 INTERFACE SPI/I2C HDMI Tx1 HDMI HDMI Tx2 HDMI VIDEO SIGNAL PROCESSING HD VIDEO DACs HDMI FRONT END (FOR EXAMPLE, ADV7850) SD VIDEO DACs COMPONENT S-VIDEO COMPOSITE ADV8003 AUDIO INSERTED INTO HDMI VIDEO STREAMS AUDIO FROM HDMI SHARC ® AUDIO PROCESSING Figure 39. System Block Diagram Rev. B | Page 63 of 64 10556-032 HDMI DUAL HIGH SPEED HDMI Rx (FOR EXAMPLE, ADV7619) EXTERNAL DDR2 ADV8003 Data Sheet OUTLINE DIMENSIONS A1 BALL CORNER 19.20 19.00 SQ 18.80 A1 BALL CORNER 22 20 18 16 14 12 10 8 6 4 2 23 21 19 17 15 13 11 9 7 5 3 1 A C E G 17.60 BSC SQ J L N 0.80 BSC R U W B D F H K M P T V Y AA AB AC TOP VIEW 1.50 1.36 1.21 BOTTOM VIEW DETAIL A 0.65 NOM DETAIL A 1.11 1.01 0.91 0.35 NOM 0.30 MIN SEATING PLANE 0.50 COPLANARITY 0.12 0.45 0.40 BALL DIAMETER COMPLIANT TO JEDEC STANDARDS MO-275-PPAB-2. 11-22-2011-A 0.35 NOM Figure 40. 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] (BC-425-1) Dimensions shown in millimeters ORDERING GUIDE Model 1, 2 ADV8003KBCZ-8 ADV8003KBCZ-8B ADV8003KBCZ-8C ADV8003KBCZ-7 ADV8003KBCZ-7B ADV8003KBCZ-7C ADV8003KBCZ-7T EVAL-ADV8003-SMZ-P 1 2 Temperature Range 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C 0°C to 70°C Package Description 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] 425-Ball Chip Scale Package Ball Grid Array [CSP_BGA] ADV8003KBCZ-7C Evaluation Board Package Option BC-425-1 BC-425-1 BC-425-1 BC-425-1 BC-425-1 BC-425-1 BC-425-1 Z = RoHS Compliant Part. The evaluation board does not require HDCP or Rovi licensing. I2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors). HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ©2012–2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D10556-0-8/13(B) Rev. B | Page 64 of 64