DS28CN01EVKIT

    DS28CN01EVKIT Evaluation Board/Evaluation System for the DS28CN01 Comprehensive Evaluation System for DS28CN01 NDA Required. Request Full Data Sheet All versions are Not Recommended for New Designs. Please check latest availability status for a specific part variant. Description The DS28CN01 evaluation system (EV system) consists of a single evaluation kit (EV kit) that includes an evaluation board (EV board) and a Maxim CMAXQUSB command module. The DS28CN01 combines 1024 bits of EEPROM with challenge-and-response authentication security implemented with the Federal Information Publications (FIPS) 180-1/180-2 and ISO/IEC 10118-3 Secure Hash Algorithm (SHA-1). The memory is organized as four pages of 32 bytes each. Data copy-protection and EPROM emulation features are supported for each memory page. Each DS28CN01 has a guaranteed unique, factory-programmed, 64-bit registration number. This EV kit provides a complete hardware and software system to exercise all of the features of the DS28CN01. The evaluation software runs under Windows® XP/Vista 32/2000/98SE operating systems, providing a handy user interface to exercise the DS28CN01 features. Figure 1, in the full data sheet, shows the stand-alone EV board and Figure 2, in the full data sheet, shows the EV board connected to the command module. Key Features      Easy Setup Proven PCB Layout Complete Evaluation System PC Connectivity Included Free Evaluation Software Available Applications/Uses        Accessory and Peripheral Identification Equipment Registration and License Management Medical Sensor Authentication and Calibration Network Node Identification Printed Circuit Board Unique Serialization Printer Cartridge Configuration and Monitoring System Intellectual Property Protectio                                                                 https://www.maximintegrated.com/en/products/digital/memory‐products/DS28CN01EVKIT.html/tb_tab0 11‐30‐18