EKIT01-HMC6545LP5

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK PRODUCT BRIEF HMC6545LP5E DUAL CHANNEL ADVANCED LINEAR EQUALIZER Low-Power, High Performance, Fully Programmable Dual-Channel Equalizer Applications „ 100 GbE Line Card and Backplane „ 16G / 32G FC and 14G FDR / 28G EDR „ 10G / 100G Stress Eye Generation „ Broadband Test and Measurement „ Active Copper / Optical Cable Assemblies „ 12G SAS / SATA Features „ Data Rate Up to 32 Gbps „ Dual Channel Receive (Rx) or Transmit (Tx) Only Solution „ Multi-UI Linear Analog Filter (9 Tap T/2 Spaced) for Extending CTLE / DFE Based ASICs Performance „ Automatic Gain Control (20 dB) „ OOB Support „ Integrated Variable Gain Amplifier with Differential Sensitivity of Less Than 20 mVp-p „ Programmable Receiver Gain and Multi-UI Equalization Allows 20 dB Equalization „ Extend Chromatic and Polarization Mode Dispersion Tolerance „ Programmable Pre-Emphasis and Differential Output Amplitude „ Output Squelch Functionality „ Single 3.3V Power Supply Eliminating External Regulators „ 5 x 5 mm 40-Pin QFN Package „ -40° C to 95° C Operating Temperature The HMC6545LP5E is a low power, high performance, fully programmable dual channel asynchronous advanced linear equalizer operating with data rates up to 32 Gbps. The HMC6545LP5E is a protocol and data rate agnostic and it can operate on the transmit path to pre-distort transmitted signal in order to invert channel distortion or on the receiver path to equalize the distorted and attenuated received signal. The HMC6545LP5E is effective in dealing with chromatic and polarization mode dispersion and inter-symbol interference (ISI) caused by wide variety of transmission media, backplane and or fiber, and channel lengths. HMC6545LP5E complements CTLE / DFE based ASIC’s in effectively dealing with reflections, crosstalk and ISI related issues. The low power, high performance and feature rich HMC6545LP5E is packaged in a 5 x 5 mm 32 pin QFN package. The device uses a single 3.3V supply eliminating external regulators. The HMC6545LP5E operates over a case temperature range of -40° C up to 95° C. RX0 Input T÷2 AGC LPF T÷2 T÷2 RX1 RX0 Output T÷2 Driver c0 c1 c2 cn Serial Control Registers RX1 Input T÷2 AGC LPF T÷2 T÷2 RX1 Output T÷2 Driver c0 c1 c2 Functional Diagram cn HMC6545LP5E Typical Applications Unequalized Input at 20 dB Loss Networking / Storage Server Applications: Effective in dealing with reflections, crosstalk and insertion loss. TX HMC6545LP5E RX CON 1 CON 2 CON 3 MID PLANE HMC6545LP5E TX SERVER BLADE RX SWITCH Active Copper Cable Assembly: Compensate insertion losses up to 40 dB at Nyquist HMC6545LP5E HMC6545LP5E 9-TAP FFE 9-TAP FFE AGC Driver AGC Equalized Output Driver EXTEND DAC CABLE LENGTH 14G FDR DAC 14G FDR DAC 40G RZ DQPSK Transponder: Effective in extending link OSNR and chromatic dispersion 28.1 Gbps Eye Diagram for 100 GbE Applications Modulator Drivers Tx (E to O) BLOCK SFI-5 16 16:2 MUX with CMU Optical Output MZM DQPSK MODULATOR Amplifier PLL PULSE CARVER Amplifier 25 GHz Clock +8 Vp-p x2 Phase Shifter Multiplier CLOCK CHAIN COMPONENTS SFI-5 16 2:16 DEMUX with CDR Rx (E to O) BLOCK Optical Input HMC6545LP5E DUAL-CHANNEL O/E (BALANCED PD + TIA) Pre-Emphasis Output Eye DQPSK DEMODULATOR PLL Related Products „ HMC1027BG, Fully Programmable Asynchronous 13 x 13 Crosspoint Switch with EQ 2 Elizabeth Drive • Chelmsford, MA 01824 978-250-3343 tel • 978-250-3373 fax www.hittite.com • mil@hittite.com View the latest releases - click on “New Products” Download Hittite at the App Store