EV1HMC1118LP3D

GND RF1 GND 15 14 13 12 VDD 2 11 LS RFC 3 10 VCTRL GND 4 9 VSS 50Ω PACKAGE BASE GND 12961-001 8 GND 7 50Ω RF2 GND HMC1118 6 1 GND GND GND Nonreflective 50 Ω design Positive control: 0 V/3.3 V Low insertion loss: 0.68 dB at 8.0 GHz High isolation: 48 dB at 8.0 GHz High power handling 35 dBm through path 27 dBm terminated path High linearity 1 dB compression (P1dB): 37 dBm typical Input third-order intercept (IIP3): 62 dBm typical ESD rating: 2 kV human body model (HBM) 3 mm × 3 mm, 16-lead LFCSP package No low frequency spurious Settling time (0.05 dB margin of final RFOUT): 7.5 μs 16 FUNCTIONAL BLOCK DIAGRAM 5 FEATURES GND Data Sheet High Isolation, Silicon SPDT, Nonreflective Switch, 9 kHz to 13.0 GHz HMC1118 Figure 1. APPLICATIONS Test instrumentation Microwave radios and very small aperture terminals (VSATs) Military radios, radars, and electronic counter measures (ECMs) Fiber optics and broadband telecommunications GENERAL DESCRIPTION The HMC1118 is a general-purpose, broadband, nonreflective single-pole, double-throw (SPDT) switch in a LFCSP surface mount package. Covering the 9 kHz to 13.0 GHz range, the switch offers high isolation and low insertion loss. The switch features >48 dB isolation, 0.68 dB insertion loss up to 8.0 GHz, and a 7.5 μs settling time of 0.05 dB margin of final RFOUT. The switch operates using positive control voltage logic lines of +3.3 V Rev. A and 0 V and requires +3.3 V and −2.5 V supplies. The HMC1118 can cover the same operating frequency range with a single positive supply voltage applied and the negative supply voltage (VSS) tied to ground and still maintaining good power handling performance. The HMC1118 is packaged in a 3 mm × 3 mm, surface mount LFCSP package. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2015–2017 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC1118 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Pin Configuration and Function Descriptions..............................6 Applications ....................................................................................... 1 Interface Schematics .....................................................................6 Functional Block Diagram .............................................................. 1 Typical Performance Characteristics ..............................................7 General Description ......................................................................... 1 Insertion Loss, Return Loss, and Isolation ................................7 Revision History ............................................................................... 2 Input Compression Point and Input Third-Order Intercept ...8 Specifications..................................................................................... 3 Theory of Operation .........................................................................9 Electrical Specifications ............................................................... 3 Applications Information .............................................................. 10 Digital Control Voltages .............................................................. 4 Evaluation PCB ........................................................................... 10 Bias and Supply Current .............................................................. 4 Outline Dimensions ....................................................................... 11 Absolute Maximum Ratings ............................................................ 5 Ordering Guide .......................................................................... 11 ESD Caution .................................................................................. 5 REVISION HISTORY 10/2017—Rev. 0 to Rev. A Change to Product Title................................................................... 1 Updated Outline Dimensions ....................................................... 11 Changes to Ordering Guide .......................................................... 11 10/2015—Revision 0: Initial Version Rev. A | Page 2 of 11 Data Sheet HMC1118 SPECIFICATIONS ELECTRICAL SPECIFICATIONS VCTRL = 0 V/3.3 V dc, VDD = LS = 3.3 V dc, VSS = −2.5 V dc, TA = 25°C, 50 Ω system, unless otherwise specified. Table 1. Parameter INSERTION LOSS Test Conditions/Comments Min 9 kHz to 3.0 GHz 9 kHz to 8.0 GHz 9 kHz to 10.0 GHz 9 kHz to 13.0 GHz Typ Max Unit 0.5 0.68 0.7 1.3 1.0 1.1 1.3 2.0 dB dB dB dB ISOLATION RFC TO RF1/RF2 (WORST CASE) 9 kHz to 3.0 GHz 9 kHz to 8.0 GHz 9 kHz to 10.0 GHz 9 kHz to 13.0 GHz RETURN LOSS On State Off State 40 42 28 18 50 48 35 25 dB dB dB dB 9 kHz to 3.0 GHz 9 kHz to 8.0 GHz 9 kHz to 13.0 GHz 9 kHz to 3.0 GHz 9 kHz to 8.0 GHz 9 kHz to 13.0 GHz 26 22 9 26 14 5 dB dB dB dB dB dB 50% VCTRL to 0.05 dB margin of final RFOUT 50% VCTRL to 0.1 dB margin of final RFOUT 7.5 6 µs µs 10%/90% RF 50% VCTRL to 10%/90% RF 1 MHz to 13.0 GHz 0.85 2.7 µs µs 37 35 62 dBm dBm dBm RADIO FREQUENCY (RF) SETTLING TIME SWITCHING SPEED tRISE/tFALL tON/tOFF INPUT POWER 1 dB Compression (P1dB) 0.1 dB Compression (P0.1dB) INPUT THIRD-ORDER INTERCEPT (IIP3) RECOMMENDED OPERATING CONDITIONS 1 Positive Supply Voltage (VDD) Negative Supply Voltage (VSS) Control Voltage (VCTRL) Range Logic Select (LS) Voltage Range RF Input Power Through Path Termination Path Hot Switch Power Level Case Temperature Range (TCASE) 1 35 Two-tone input power = 14 dBm at each tone, 1 MHz to 13.0 GHz 3.0 −2.75 0 0 3.6 −2.25 VDD VDD V V V V +85 dBm dBm dBm °C VDD/VCTRL = 3.3 V, VSS = −2.5 V, TA = 85°C, frequency = 2 GHz 35 27 27 VDD = 3.3 V, TA = 85°C, frequency = 2 GHz −40 These are the recommended values for these parameters. Rev. A | Page 3 of 11 HMC1118 Data Sheet DIGITAL CONTROL VOLTAGES VDD = 3.3 V ± 10%, VSS = −2.5 V ± 10%, TCASE = −40°C to +85°C, unless otherwise specified. Table 2. Parameter INPUT CONTROL VOLTAGE Low High Symbol Min VIL VIH −0.3 2.0 Typ Max Unit +0.8 VDD + 0.3 V V Test Condition/Comments