EV1HMC1160LP5

VTUNE NC NC NC NC 30 29 28 27 26 25 NC 1 24 NC NC 2 23 NC NC 3 22 NC NC 4 21 VCC GND 5 20 NC NC 6 19 RFOUT NC 7 18 NC NC 8 17 NC 14 15 16 PACKAGE BASE GND 13051-001 13 NC 12 NC 11 NC 10 NC NC 9 GND Point to point and multipoint radio Test equipment and industrial controls VSAT 31 RFOUT/2 APPLICATIONS 32 NC Dual output: fO = 8.45 GHz to 9.3 GHz fO/2 = 4.225 GHz to 4.65 GHz POUT: 12 dBm Phase noise: −116 dBc/Hz at 100 kHz No external resonator needed RoHS compliant, 5 mm × 5 mm SMT package: 25 mm² NC FUNCTIONAL BLOCK DIAGRAM NC FEATURES NC Data Sheet MMIC VCO with Half Frequency Output, 8.45 GHz to 9.30 GHz HMC1160 Figure 1. GENERAL DESCRIPTION The HMC1160 is a MMIC voltage controlled oscillator that integrates a resonator, a negative resistance device, and a varactor diode, and features a half frequency output. Power output is 12 dBm typical from a 5 V supply voltage. The voltage controlled oscillator is housed in a RoHS compliant SMT package and requires no external matching components. Because of the monolithic construction of the oscillator, output power and phase noise performance are excellent over temperature. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices.Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2014–2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC1160 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Interface Schematics .....................................................................6 Applications ....................................................................................... 1 Typical Performance Characteristics ..............................................7 Functional Block Diagram .............................................................. 1 Evaluation Printed Circuit Board (PCB) ........................................9 General Description ......................................................................... 1 Bill of Materials ..............................................................................9 Revision History ............................................................................... 2 Packaging and Ordering Information ......................................... 10 Specifications..................................................................................... 3 Outline Dimensions ................................................................... 10 Absolute Maximum Ratings ....................................................... 4 Ordering Guide .......................................................................... 10 ESD Caution .................................................................................. 4 Pin Configuration and Function Descriptions ............................. 5 REVISION HISTORY 5/15—v00.0814 to Rev. A This Hittite Microwave Products data sheet has been reformatted to meet the styles and standards of Analog Devices, Inc. Updated Format .................................................................. Universal Added Interface Schematics Section, Renumbered Figures Sequentially ....................................................................................... 6 Reordered Figure Sequence, Typical Performance Characteristics Section..................................................................... 7 Deleted Figure: Frequency vs. Tuning Voltage, T = 25°C, Renumbered Figures Sequentially .................................................. 7 Deleted Typical Applications Circuit ............................................. 9 Changes to Ordering Guide .......................................................... 11 Rev. A | Page 2 of 10 Data Sheet HMC1160 SPECIFICATIONS TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted. Table 1. Parameter FREQUENCY Range fO fO/2 Drift Rate Pulling Pushing POWER OUTPUT RFOUT RFOUT/2 Supply Current (ICC) Min 8.45 4.225 Max Unit Test Conditions/Comments 9.3 4.65 GHz GHz MHz/°C MHz p-p MHz/V Pulling into a 2.0:1 VSWR At VTUNE = 5 V dBm dBm mA mA mA VCC = 4.75 V VCC = 5.00 V VCC = 5.25 V 0.74 4.5 5.5 9 0 195 HARMONICS, SUBHARMONICS 1/2 Second Third TUNING Voltage (VTUNE) Sensitivity Tune Port Leakage Current OUTPUT RETURN LOSS SSB PHASE NOISE 10 kHz Offset 100 kHz Offset Typ 17 8 240 260 275 325 37 18 30 2 40 dBc dBc dBc 13 250 10 V MHz/V μA dB −85 −110 dBc/Hz dBc/Hz 2 −90 −116 Rev. A | Page 3 of 10 VTUNE = 13 V HMC1160 Data Sheet ABSOLUTE MAXIMUM RATINGS Table 2. Parameter VCC VTUNE Temperature Operating Storage Nominal Junction (To Maintain 1 million hours MTTF) Nominal Junction (T = 85°C) Maximum Reflow Temperature (MSL3 Rating) Thermal Resistance (Junction to Ground Paddle) ESD Sensitivity (Human Body Model) Rating 5.5 V dc 0 V to 15 V −40°C to +85°C −65°C to +150°C 135°C 125°C 260°C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. ESD CAUTION 31°C/W Class 1A Rev. A | Page 4 of 10 Data Sheet HMC1160 NC NC VTUNE NC NC NC NC 32 31 30 29 28 27 26 25 NC 3 22 NC NC 4 HMC1160 21 VCC GND 5 TOP VIEW (Not to Scale) 20 NC NC 6 19 RFOUT NC 7 18 NC NC 8 17 NC 9 10 11 12 13 14 15 16 NC NC NC 23 NC 2 NC NC RFOUT/2 NC GND 24 NC 1 NC NC NOTES 1. NC = NO CONNECT. HOWEVER, THESE PINS MAY BE CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE OF THE DEVICE. 2. THE EXPOSED PAD MUST BE CONNECTED TO RF/DC GROUND. 13051-002 NC PIN CONFIGURATION AND FUNCTION DESCRIPTIONS Figure 2. Pin Configuration Table 3. Pin Function Descriptions Pin No. 1 to 4, 6 to 10, 13 to 18, 20, 22 to 28, 30 to 32 12 19 21 29 Mnemonic NC 5, 11 GND EP RFOUT/2 RFOUT VCC VTUNE Description No Connect. However, these pins can be connected to RF/dc ground without affecting the performance of the device. Half Frequency Output. This pin is ac-coupled. RF Output. This pin is ac-coupled. Supply Voltage (5 V). Control Voltage and Modulation Input. The modulation bandwidth is dependent on the drive source impedance. Ground. These pins must be connected to RF/dc ground. Exposed Paddle. The package bottom has an exposed metal paddle that must be connected to RF/dc ground. Rev. A | Page 5 of 10 HMC1160 Data Sheet INTERFACE SCHEMATICS VTUNE RFOUT/2 2Ω 3.5nH 72pF 13051-014 13051-011 4pF Figure 3. RFOUT/2 Interface Figure 6. VTUNE Interface RFOUT 13051-015 13051-012 GND Figure 7. GND Interface Figure 4. RFOUT Interface VCC 13051-013 26pF Figure 5. VCC Interface Rev. A | Page 6 of 10 Data Sheet HMC1160 TYPICAL PERFORMANCE CHARACTERISTICS 300 10.0 –40°C +25°C +85°C 9.5 280 270 9.0 ICC (mA) OUTPUT FREQUENCY (GHz) –40°C +25°C +85°C 290 8.5 260 250 240 8.0 230 220 7.5 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (VDC) 10 11 12 13 200 13051-003 0 0 2 3 4 5 6 7 8 9 10 11 12 13 12 13 TUNING VOLTAGE (VDC) Figure 8. Frequency vs. Tuning Voltage Figure 11. Supply Current (ICC) vs. Tuning Voltage 5.00 16 –40°C +25°C +85°C –40°C +25°C +85°C 4.75 OUTPUT FREQUENCY (GHz) 14 OUTPUT POWER (dBm) 1 13051-006 210 7.0 12 10 8 6 4 4.50 4.25 4.00 3.75 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (VDC) 13051-004 3.50 0 0 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (VDC) Figure 9. Output Power vs. Tuning Voltage Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage 8 600 1 13051-007 2 –40°C +25°C +85°C –40°C +25°C +85°C 7 OUTPUT POWER (dBm) 400 300 200 6 5 4 3 2 100 0 0 1 2 3 4 5 6 7 8 9 10 TUNING VOLTAGE (VDC) 11 12 13 Figure 10. Sensitivity vs. Tuning Voltage 0 0 1 2 3 4 5 6 7 8 9 10 11 12 TUNING VOLTAGE (VDC) Figure 13. RFOUT/2 Output Power vs. Tuning Voltage Rev. A | Page 7 of 10 13 13051-008 1 13051-005 SENSITIVITY (MHz/V) 500 Data Sheet –50 –80 –60 –85 –70 –90 –95 –40°C, 10kHz +25°C, 10kHz +85°C, 10kHz –40°C, 100kHz +25°C, 100kHz +85°C, 100kHz –100 –105 –110 –80 –90 –100 –110 –120 –115 –130 –120 –140 –125 0 1 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (VDC) 12 13 Figure 14. SSB Phase Noise vs. Tuning Voltage –40°C +25°C +85°C –150 1k 10k 100k OFFSET FREQUENCY (Hz) Figure 15. SSB Phase Noise at VTUNE = 5 V Rev. A | Page 8 of 10 1M 13051-010 SSB PHASE NOISE (dBc/Hz) –75 13051-009 SSB PHASE NOISE (dBc/Hz) HMC1160 Data Sheet HMC1160 13051-017 EVALUATION PRINTED CIRCUIT BOARD (PCB) Figure 16. Evaluation Board The circuit board used in an application uses RF circuit design techniques. Ensure that signal lines have 50 Ω impedance and that the package ground leads and backside ground paddle are connected directly to the ground plane. BILL OF MATERIALS Table 4. Bill of Materials EV1HMC1160LP5 Item J1 to J4 J5, J6 C1 to C3 C4 C5 to C7 C8 U1 PCB1 Use a sufficient number of via holes to connect the top and bottom ground planes. The evaluation circuit board shown in 16 is available from Analog Devices, Inc., upon request. 1 2 Description PCB mount SMA RF connector 2 mm dc header 100 pF capacitor, 0402 package 1000 pF capacitor, 0402 package 2.2 μF tantalum capacitor 0.01 μF capacitor, 0603 package HMC1160 VCO 110225 evaluation board2 Circuit board material is Rogers 4350. Reference this number when ordering the complete evaluation PCB. Rev. A | Page 9 of 10 HMC1160 Data Sheet PACKAGING AND ORDERING INFORMATION OUTLINE DIMENSIONS 0.30 0.25 0.18 1 24 0.50 BSC 3.80 3.65 SQ 3.50 EXPOSED PAD 17 TOP VIEW 1.00 0.90 0.80 PKG-000000 0.45 0.40 0.35 8 16 9 BOTTOM VIEW 3.50 REF 0.05 MAX 0.02 NOM COPLANARITY 0.08 0.20 REF SEATING PLANE PIN 1 INDICATOR 32 25 0.20 MIN FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. 03-04-2015-A PIN 1 INDICATOR 5.10 5.00 SQ 4.90 COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4. Figure 17. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 5 mm × 5 mm Body, Very Thin Quad (HCP-32-1) Dimensions shown in millimeters ORDERING GUIDE Model1 HMC1160LP5E Temperature Range −40°C to +85°C MSL Rating2 MSL3 Package Description 32-Lead LFCSP_VQ Package Option HCP-32-1 Qty. HMC1160LP5ETR −40°C to +85°C MSL3 32-Lead LFCSP_VQ, 7” Tape and Reel HCP-32-1 500 EV1HMC1160LP5 Evaluation Board 1 The HMC1160LP5E and HMC1160LP5ETR are RoHS compliant parts. 2 See the Absolute Maximum Ratings section, Table 2. 3 XXXX is a placeholder for the 4-digit lot number. ©2014–2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D13051-0-5/15(A) Rev. A | Page 10 of 10 Brand3 H1160 XXXX H1160 XXXX