EV1HMC1162LP5

NC VTUNE NC NC NC NC 31 30 29 28 27 26 25 NC 1 24 NC NC 2 23 NC NC 3 22 NC NC 4 21 VCC GND 5 20 NC NC 6 19 RFOUT NC 7 18 NC NC 8 17 NC 13 14 15 NC 16 PACKAGE BASE GND NOTES 1. NC = NO CONNECT. THESE PINS ARE NOT INTERNALLY CONNECTED. HOWEVER, THESE PINS CAN BE CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE OF THE DEVICE. 13066-001 12 NC 11 NC 10 NC NC 9 RFOUT/2 Point to point and multipoint radios Test equipment and industrial controls Very small aperture terminals (VSATs) 32 GND APPLICATIONS NC FUNCTIONAL BLOCK DIAGRAM Dual output fOUT = 9.25 GHz to 10.10 GHz fOUT/2 = 4.625 GHz to 5.050 GHz Power output (POUT): 11 dBm (typical) Single-sideband (SSB) phase noise: −115 dBc/Hz at 100 kHz No external resonator needed RoHS-compliant, 5 mm × 5 mm LFCSP: 25 mm² NC FEATURES NC Data Sheet 9.25 GHz to 10.10 GHz MMIC VCO with Half Frequency Output HMC1162 Figure 1. GENERAL DESCRIPTION The HMC1162 is a monolithic microwave integrated circuit (MMIC), voltage controlled oscillator (VCO) that integrates the resonator, a negative resistance device, and varactor diodes, and features a half frequency output. The power output is 11 dBm typical from a 5 V supply voltage. The VCO is housed in a RoHS-compliant, 32-lead LFCSP and requires no external matching components. Because of the monolithic construction of the oscillator, the output power and phase noise performance are excellent over temperature. Rev. A Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC1162 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Interface Schematics .....................................................................6 Applications ....................................................................................... 1 Typical Performance Characteristics ..............................................7 Functional Block Diagram .............................................................. 1 Applications Information .................................................................9 General Description ......................................................................... 1 Evaluation Printed Circuit Board (PCB) ..................................... 10 Revision History ............................................................................... 2 Bill of Materials ........................................................................... 10 Specifications..................................................................................... 3 Packaging and Ordering Information ......................................... 11 Absolute Maximum Ratings ....................................................... 4 Outline Dimensions ................................................................... 11 ESD Caution .................................................................................. 4 Ordering Guide .......................................................................... 11 Pin Configuration and Function Descriptions ............................. 5 REVISION HISTORY 9/15—v00.0914 to Rev. A This Hittite Microwave Products data sheet has been reformatted to meet the styles and standards of Analog Devices, Inc. Updated Format .................................................................. Universal Changes to Features Section and General Description Section ................................................................................................ 1 Deleted Frequency vs. Tuning Voltage, T = 25°C Graph; Renumbered Sequentially................................................................ 2 Changes to Table 1 ............................................................................ 3 Deleted Reliability Information Table; Renumbered Sequentially ....................................................................................... 3 Changes to Table 2.............................................................................4 Added Interface Schematics Section ...............................................6 Reordered Figure Sequence, Typical Performance Characteristics Section .....................................................................7 Added Applications Information Section ......................................9 Added Figure 16; Renumbered Sequentially .................................9 Changes to Table 4.......................................................................... 10 Updated Outline Dimensions ....................................................... 11 Changes to Ordering Guide .......................................................... 11 Rev. A | Page 2 of 11 Data Sheet HMC1162 SPECIFICATIONS TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted. Table 1. Parameter FREQUENCY Range fOUT fOUT/2 Drift Rate Pulling Pushing POWER OUTPUT (POUT) RFOUT RFOUT/2 Supply Current (ICC) Min 9.25 4.625 Max Unit Test Conditions/Comments 10.10 5.050 GHz GHz MHz/°C MHz p-p MHz/V Pulling into a 2.0:1 voltage standing wave ratio (VSWR) At VTUNE = 5 V dBm dBm mA mA mA VCC = 4.75 V VCC = 5.00 V VCC = 5.25 V 1.0 0.5 6 7 3 160 HARMONICS, SUBHARMONICS 1/2 3/2 Second Third TUNING Voltage (VTUNE) Sensitivity Tune Port Leakage Current OUTPUT RETURN LOSS SSB PHASE NOISE 10 kHz Offset 100 kHz Offset Typ 11 7.5 205 230 250 15 12 310 39 23 14 22 2 50 dBc dBc dBc dBc 13 350 10 V MHz/V µA dB −83 −110 dBc/Hz dBc/Hz 7 −86 −115 VTUNE = 13 V Rev. A | Page 3 of 11 HMC1162 Data Sheet ABSOLUTE MAXIMUM RATINGS Table 2. Parameter VCC VTUNE Temperature Operating Storage Nominal Junction (To Maintain 1 Million Hours Mean Time to Failure (MTTF)) Nominal Junction (TA = 85°C) Maximum Reflow Temperature (MSL3 Rating) Thermal Resistance (Junction to Exposed Pad) ESD Sensitivity (Human Body Model) Rating 5.5 V dc 0 V to 15 V −40°C to +85°C −65°C to +150°C 135°C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. ESD CAUTION 116.3°C 260°C 24.3°C/W Class 1A Rev. A | Page 4 of 11 Data Sheet HMC1162 NC NC VTUNE NC NC NC NC 32 31 30 29 28 27 26 25 NC 3 22 NC NC 4 HMC1162LP5E 21 VCC GND 5 TOP VIEW (Not to Scale) 20 NC NC 6 19 RFOUT NC 7 18 NC NC 8 17 NC 9 10 11 12 13 14 15 16 NC NC NC 23 NC 2 NC NC RFOUT/2 NC GND 24 NC 1 NC NC NOTES 1. NC = NO CONNECT. THESE PINS ARE NOT INTERNALLY CONNECTED. HOWEVER, THESE PINS CAN BE CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE OF THE DEVICE. 2. THE PACKAGE BOTTOM HAS AN EXPOSED METAL PAD THAT MUST BE CONNECTED TO RF/DC GROUND. 13066-002 NC PIN CONFIGURATION AND FUNCTION DESCRIPTIONS Figure 2. Pin Configuration Table 3. Pin Function Descriptions Pin No. 1 to 4, 6 to 10, 13 to 18, 20, 22 to 28, 30 to 32 5, 11 12 19 21 29 Mnemonic NC GND RFOUT/2 RFOUT VCC VTUNE EP Description No Connect. These pins are not internally connected. However, these pins can be connected to RF/dc ground without affecting the performance of the device. Ground. These pins must be connected to RF/dc ground. Half Frequency Output. This pin is ac-coupled. RF Output. This pin is ac-coupled. Supply Voltage (5 V). Control Voltage and Modulation Input. The modulation bandwidth is dependent on the drive source impedance. Exposed Pad. The package bottom has an exposed metal pad that must be connected to RF/dc ground. Rev. A | Page 5 of 11 HMC1162 Data Sheet INTERFACE SCHEMATICS 3nH VTUNE 13066-012 RFOUT/2 80pF 13066-015 4pF Figure 3. RFOUT/2 Interface Figure 6. VTUNE Interface 13066-013 RFOUT 13066-016 GND Figure 4. RFOUT Interface Figure 7. GND Interface VCC 13066-014 15pF Figure 5. VCC Interface Rev. A | Page 6 of 11 Data Sheet HMC1162 TYPICAL PERFORMANCE CHARACTERISTICS 280 11.0 270 260 10.0 –40°C 250 ICC (mA) OUTPUT FREQUENCY (GHz) 10.5 9.5 +25°C +85°C 9.0 240 –40°C 230 +25°C 220 +85°C 210 8.5 200 8.0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (V dc) 13066-003 0 180 0 1 2 3 4 5 6 7 8 Figure 8. Output Frequency vs. Tuning Voltage 10 11 12 13 12 13 Figure 11. Supply Current vs. Tuning Voltage 5.5 14 –40°C 5.3 OUTPUT FREQUENCY (GHz) 12 OUTPUT POWER (dBm) 9 TUNING VOLTAGE (V dc) 13066-007 190 7.5 10 +25°C +85°C 8 6 4 –40°C 5.1 4.9 4.7 +85°C 4.5 +25°C 4.3 4.1 3.9 2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 TUNING VOLTAGE (V dc) 3.5 13066-009 2 3 4 5 6 7 8 9 10 OUTPUT POWER (dBm) 500 400 300 200 –40°C 8 6 +25°C +85°C 4 2 100 0 1 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (V dc) 12 13 0 13066-004 SENSITIVITY (MHz/V) 11 12 600 0 10 Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage –40°C +25°C +85°C 700 1 TUNING VOLTAGE (V dc) Figure 9. Output Power vs. Tuning Voltage 800 0 0 1 2 3 4 5 6 7 8 9 10 11 12 TUNING VOLTAGE (V dc) Figure 13. RFOUT/2 Output Power vs. Tuning Voltage Figure 10. Sensitivity vs. Tuning Voltage Rev. A | Page 7 of 11 13 13066-011 0 13066-006 3.7 HMC1162 Data Sheet 10kHz SSB PHASE NOISE (dBc/Hz) –85 –90 –95 –100 –105 100kHz –110 –70 –80 +25°C –100 –110 –120 –130 –120 –140 0 1 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (V dc) 12 13 –40°C –90 –115 –125 +85°C –60 13066-005 SSB PHASE NOISE (dBc/Hz) –80 –50 –40°C +25°C +85°C –150 1k 10k 100k 1M OFFSET FREQUENCY (Hz) Figure 15. SSB Phase Noise vs. Offset Frequency at VTUNE = 5 V Figure 14. SSB Phase Noise vs. Tuning Voltage Rev. A | Page 8 of 11 13066-010 –75 Data Sheet HMC1162 APPLICATIONS INFORMATION monotonic tuning sensitivity allows a stable loop filter design. The higher output power minimizes the gain required to drive subsequent stages. The half frequency output reduces the input frequency to the prescaler without the addition of residual phase noise to the input of the phase-locked loop synthesizer. The HMC1162 serves as the local oscillator (LO) in microwave synthesizer applications. Point to point microwave radios, military, radars, test and measurement, as well as industrial and medical equipment are the primary applications. The low phase noise allows higher orders of modulation and offers improved bit error rates in communication systems, and the linear, LOOP FILTER SCK HOST SDI CP SYNTH RFOUT SEN VTUNE XREFP 13066-018 REF RFOUT/2 VCO INPUT Figure 16. Typical Application Diagram Rev. A | Page 9 of 11 HMC1162 Data Sheet 13066-017 EVALUATION PRINTED CIRCUIT BOARD (PCB) Figure 17. Evaluation Board The circuit board used in an application uses RF circuit design techniques. Ensure that the signal lines have 50 Ω impedance and that the package ground leads and backside ground paddle are connected directly to the ground plane. Use a sufficient number of via holes to connect the top and bottom ground planes. The evaluation circuit board shown in Figure 17 is available from Analog Devices, Inc., upon request. BILL OF MATERIALS Table 4. Bill of Materials EV1HMC1162LP5 Item J1 to J4 J5, J6 C1 to C3 C4 C5 to C7 C8 U1 PCB1 1 2 Description PCB mount SMA RF connectors 2 mm dc headers 100 pF capacitors, 0402 package 1000 pF capacitor, 0402 package 2.2 μF tantalum capacitors 0.01 μF capacitor, 0603 package HMC1162 VCO EV1HMC1162LP5 evaluation board2 Circuit board material is Rogers 4350. Reference this number when ordering the complete evaluation PCB. Rev. A | Page 10 of 11 Data Sheet HMC1162 PACKAGING AND ORDERING INFORMATION OUTLINE DIMENSIONS 0.30 0.25 0.18 1 24 0.50 BSC 3.80 3.65 SQ 3.50 EXPOSED PAD 17 TOP VIEW 1.00 0.90 0.80 8 16 9 BOTTOM VIEW 3.50 REF 0.05 MAX 0.02 NOM COPLANARITY 0.08 0.20 REF SEATING PLANE PKG-000000 0.45 0.40 0.35 PIN 1 INDICATOR 32 25 0.20 MIN FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. 03-04-2015-A PIN 1 INDICATOR 5.10 5.00 SQ 4.90 COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4. Figure 18. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 5 mm × 5 mm Body, Very Thin Quad (HCP-32-1) Dimensions shown in millimeters ORDERING GUIDE Model1 HMC1162LP5E Temperature Range −40°C to +85°C MSL Rating2 MSL3 Package Description 32-Lead LFCSP_VQ Package Option HCP-32-1 Qty. HMC1162LP5ETR −40°C to +85°C MSL3 32-Lead LFCSP_VQ, 7” Tape and Reel HCP-32-1 500 EV1HMC1162LP5 1 2 3 Evaluation Board The HMC1162LP5E and HMC1162LP5ETR are RoHS compliant parts. See the Absolute Maximum Ratings section, Table 2. XXXX is a placeholder for the 4-digit lot number. ©2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D13066-0-9/15(A) www.analog.com/HMC1162 Rev. A | Page 11 of 11 Brand3 H1162 XXXX H1162 XXXX