EV1HMC1164LP5

VTUNE NC NC NC NC 31 30 29 28 27 26 25 NC 1 24 NC NC 2 23 NC NC 3 22 NC NC 4 21 VCC GND 5 20 NC NC 6 19 RFOUT NC 7 18 NC NC 8 17 NC 15 16 PACKAGE BASE GND 13153-001 14 NC 13 NC 12 NC 11 NC 10 RFOUT/2 NC 9 NC Point to point and multipoint radios Test equipment and industrial controls Very small aperture terminals (VSATs) 32 GND APPLICATIONS NC FUNCTIONAL BLOCK DIAGRAM Dual output frequency range fOUT = 10.38 GHz to 11.30 GHz fOUT/2 = 5.19 GHz to 5.65 GHz Power output (POUT): 8 dBm Single-side band (SSB) phase noise −86 dBc/Hz typical at 10 kHz −114 dBc/Hz typical at 100 kHz No external resonator needed 32-lead, RoHS compliant, 5 mm × 5 mm LFCSP (25 mm²) NC FEATURES NC Data Sheet 10.38 GHz to 11.30 GHz MMIC VCO with Half Frequency Output HMC1164 Figure 1. GENERAL DESCRIPTION The HMC1164 is a monolithic microwave integrated circuit (MMIC), voltage controlled oscillator that integrates a resonator, a negative resistance device, and a varactor diode, and features a half frequency output. Rev. 0 Because of the monolithic construction of the oscillator, the output power and phase noise performance are excellent over temperature. The power output is 8 dBm typical from a 5 V supply voltage. The voltage controlled oscillator is housed in a RoHS-compliant LFCSP package and requires no external matching components. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC1164 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Pin Configuration and Function Descriptions..............................5 Applications ....................................................................................... 1 Interface Schematics .....................................................................6 Functional Block Diagram .............................................................. 1 Typical Performance Characteristics ..............................................7 General Description ......................................................................... 1 Evaluation Printed Circuit Board (PCB) ........................................9 Revision History ............................................................................... 2 Bill of Materials ..............................................................................9 Specifications..................................................................................... 3 Packaging and Ordering Information ......................................... 10 Absolute Maximum Ratings ....................................................... 4 Outline Dimensions ................................................................... 10 ESD Caution .................................................................................. 4 Ordering Guide .......................................................................... 10 REVISION HISTORY 5/15—Revision 0: Initial Version Rev. 0 | Page 2 of 10 Data Sheet HMC1164 SPECIFICATIONS TA = −40°C to +85°C, VCC = 5 V, unless otherwise noted. Table 1. Parameter FREQUENCY Range fOUT fOUT/2 Drift Rate Pulling Pushing POWER OUTPUT RFOUT RFOUT/2 Supply Current (ICC) Min Max Unit 11.30 5.65 1.0 0.3 GHz GHz MHz/°C MHz p-p 8.0 MHz/V 10.38 5.19 4 4 160 HARMONICS, SUBHARMONICS Half Second Third TUNING Voltage (VTUNE) Sensitivity Tune Port Leakage Current OUTPUT RETURN LOSS (RFOUT) SSB PHASE NOISE 10 kHz Offset 100 kHz Offset Typ 8 8 175 200 218 12 12 290 39 20 30 2 80 Pulling into a 2.0:1 voltage standing wave ratio (VSWR) At VTUNE = 5 V VCC = 4.75 V VCC = 5.00 V VCC = 5.25 V RFOUT dBc dBc dBc 13 300 10 V MHz/V µA dB −82 −110 dBc/Hz dBc/Hz 3.5 −86 −114 dBm dBm mA mA mA Test Conditions/Comments Rev. 0 | Page 3 of 10 VTUNE = 13 V HMC1164 Data Sheet ABSOLUTE MAXIMUM RATINGS Table 2. Parameter VCC VTUNE Temperature Operating Storage Nominal Junction (to Maintain 1 Million Hours MTTF) Nominal Junction (TA = 85°C) Maximum Reflow Temperature (MSL3 Rating) Thermal Resistance (Junction to Ground Paddle) ESD Sensitivity (Human Body Model) Rating 5.5 V dc 0 V to 15 V −40°C to +85°C −65°C to +150°C 135°C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. ESD CAUTION 111°C 260°C 26°C/W Class 1A Rev. 0 | Page 4 of 10 Data Sheet HMC1164 NC NC VTUNE NC NC NC NC 32 31 30 29 28 27 26 25 NC 1 24 NC NC 2 23 NC NC 3 22 NC NC 4 GND 5 NC 7 18 NC NC 8 17 NC 9 10 11 12 13 14 15 16 NC NC NC RFOUT NC 19 NC 6 RFOUT/2 NC GND 20 NC VCC TOP VIEW (Not to Scale) NC HMC1164 21 NOTES 1. NC = NO CONNECT. HOWEVER, THESE PINS MAY BE CONNECTED TO RF/DC GROUND WITHOUT AFFECTING THE PERFORMANCE OF THE DEVICE. 2. THE EXPOSED PAD MUST BE CONNECTED TO RF/DC GROUND. 13153-002 NC PIN CONFIGURATION AND FUNCTION DESCRIPTIONS Figure 2. Pin Configuration Table 3. Pin Function Descriptions Pin No. 1 to 4, 6 to 10, 13 to 18, 20, 22 to 28, 30 to 32 5, 11 12 19 21 29 Mnemonic NC GND RFOUT/2 RFOUT VCC VTUNE EP Description No Connect. However, these pins can be connected to RF/dc ground without affecting the performance of the device. Ground. Connect these pins to RF/dc ground. Half Frequency Output. This pin is ac-coupled. RF Output. This pin is ac-coupled. Supply Voltage (5 V). Control Voltage and Modulation Input. The modulation bandwidth is dependent on the drive source impedance. Exposed Pad. The exposed metal pad must be connected to RF/dc ground. Rev. 0 | Page 5 of 10 HMC1164 Data Sheet INTERFACE SCHEMATICS 13153-003 RFOUT/2 130pF 4pF Figure 3. RFOUT/2 Interface Figure 6. VTUNE Interface GND Figure 4. RFOUT Interface 13153-007 13153-004 RFOUT Figure 7. GND Interface VCC 13153-005 30pF Figure 5. VCC Interface Rev. 0 | Page 6 of 10 13153-006 3nH VTUNE Data Sheet HMC1164 TYPICAL PERFORMANCE CHARACTERISTICS 260 12.0 +85°C +25°C –40°C 250 240 11.0 230 ICC (mA) 10.5 10.0 220 210 200 190 9.5 180 +85°C +25°C –40°C 170 8.5 0 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (V dc) 10 11 12 13 160 0 Figure 8. Output Frequency vs. Tuning Voltage (VTUNE) 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (V dc) 10 11 12 13 13153-011 9.0 13153-008 OUTPUT FREQUENCY (GHz) 11.5 Figure 11. Supply Current (ICC) vs. Tuning Voltage (VTUNE) 6.00 12 11 5.80 8 7 6 5 4 3 +85°C +25°C –40°C 2 1 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (V dc) 10 11 12 13 5.20 5.00 4.80 4.60 +85°C +25°C –40°C 4.20 0 Figure 9. Output Power vs. Tuning Voltage (VTUNE) 1 2 3 9 4 5 6 7 8 TUNING VOLTAGE (V dc) 10 11 12 13 Figure 12. RFOUT/2 Output Frequency vs. Tuning Voltage (VTUNE) 900 12 +85°C +25°C –40°C 11 10 OUTPUT POWER (dBm) 700 600 500 400 300 200 9 8 7 6 5 4 3 +85°C +25°C –40°C 2 100 0 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (V dc) 10 11 12 13 13153-010 1 0 0 0 Figure 10. Sensitivity vs. Tuning Voltage (VTUNE) 1 2 3 4 5 6 7 8 9 TUNING VOLTAGE (V dc) 10 11 12 13 Figure 13. RFOUT/2 Output Power vs. Tuning Voltage (VTUNE) Rev. 0 | Page 7 of 10 13153-013 800 SENSITIVITY (MHz/V) 5.40 4.40 0 0 5.60 13153-012 OUTPUT FREQUENCY (GHz) 9 13153-009 OUTPUT POWER (dBm) 10 HMC1164 Data Sheet –10 –75 +85°C +25°C –40°C –20 –30 SSB PHASE NOISE (dBc/Hz) –85 –90 –40°C, 10 kHz +25°C, 10 kHz +85°C, 10 kHz –40°C, 100 kHz +25°C, 100 kHz +85°C, 100 kHz –95 –100 –105 –110 –40 –50 –60 –70 –80 –90 –100 –110 –120 –130 –140 –115 0 1 2 3 9 8 6 7 4 5 TUNING VOLTAGE (V dc) 10 11 12 13 –160 100 1k 10k 100k OFFSET FREQUENCY (Hz) 1M 10M Figure 15. SSB Phase Noise vs. Offset Frequency at VTUNE = 5 V Figure 14. SSB Phase Noise vs. Tuning Voltage (VTUNE) Rev. 0 | Page 8 of 10 13153-015 –150 –120 13153-014 SSB PHASE NOISE (dBc/Hz) –80 Data Sheet HMC1164 EVALUATION PRINTED CIRCUIT BOARD (PCB) J1 J5 VCC U1 J2 13153-016 J4 J3 Figure 16. 110225-3 Evaluation PCB The circuit board used in this application uses RF circuit design techniques. Ensure that signal lines have 50 Ω impedance and connect the package ground leads and backside ground paddle directly to the ground plane. Use a sufficient number of via holes to connect the top and bottom ground planes. The evaluation circuit board shown in Figure 16 is available from Analog Devices, Inc., upon request. BILL OF MATERIALS Table 4. Bill of Materials for the EV1HMC1164LP5 Item J1 to J4 J5, J6 C1 to C3 C4 C5 to C7 C8 U1 PCB 1 1 2 Description PCB mount SMA RF connectors 2 mm dc header 100 pF capacitors, 0402 package 1000 pF capacitor, 0402 package 2.2 μF tantalum capacitors 0.01 μF capacitor, 0603 package HMC1164LP5E VCO 110225-3 evaluation board 2 Circuit board material is Rogers 4350. Reference this number when ordering the complete evaluation PCB. Rev. 0 | Page 9 of 10 HMC1164 Data Sheet PACKAGING AND ORDERING INFORMATION OUTLINE DIMENSIONS 0.30 0.25 0.18 1 24 0.50 BSC 3.80 3.65 SQ 3.50 EXPOSED PAD 17 TOP VIEW 1.00 0.90 0.80 8 16 9 BOTTOM VIEW 3.50 REF 0.05 MAX 0.02 NOM COPLANARITY 0.08 0.20 REF SEATING PLANE PKG-000000 0.45 0.40 0.35 PIN 1 INDICATOR 32 25 0.20 MIN FOR PROPER CONNECTION OF THE EXPOSED PAD, REFER TO THE PIN CONFIGURATION AND FUNCTION DESCRIPTIONS SECTION OF THIS DATA SHEET. 03-04-2015-A PIN 1 INDICATOR 5.10 5.00 SQ 4.90 COMPLIANT TO JEDEC STANDARDS MO-220-VHHD-4. Figure 17. 32-Lead Lead Frame Chip Scale Package [LFCSP_VQ] 5 mm × 5 mm Body, Very Thin Quad (HCP-32-1) Dimensions shown in millimeters ORDERING GUIDE Model1 HMC1164LP5E Temperature Range −40°C to +85°C MSL Rating2 MSL3 Package Description 32-Lead LFCSP_VQ Package Option HCP-32-1 Qty. HMC1164LP5ETR −40°C to +85°C MSL3 32-Lead LFCSP_VQ, 7” Tape and Reel HCP-32-1 500 EV1HMC1164LP5 Evaluation Board 1 The HMC1164LP5E and HMC1164LP5ETR are RoHS-compliant parts. See the Absolute Maximum Ratings section, Table 2. 3 XXXX is a placeholder for the 4-digit lot number. 2 ©2015 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D13153-0-5/15(0) www.analog.com/HMC1164 Rev. 0 | Page 10 of 10 Branding3 H1164 XXXX H1164 XXXX