EV1HMC540SLP3

HMC540SLP3E v00.0915 ATTENUATORS - SMT 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz Typical Applications Features The HMC540SLP3E is ideal for both RF 1 dB LSB Steps to 15 dB and IF applications: ± 0.2 dB Typical Step Error • Cellular Infrastructure Low Insertion Loss: =< 1 dB • Wireless Infrastructure High IP3: +56 dBm • Microwave Radio & VSAT Single Control Line Per Bit TTL/CMOS Compatible Control • Test Equipment and Sensors Single +3.3/+5V Supply 3x3 mm SMT Package Functional Diagram ESD rating: Class 2 (2kV HBM) Drop-in Replacement for HMC540LP3E General Description The HMC540SLP3E is a broadband 4-bit Silicon IC digital attenuator in a low cost leadless surface mount package. This single positive control line per bit digital attenuator utilizes off chip AC ground capacitors for near DC operation, making it suitable for a wide variety of RF and IF applications. Covering 0.1 to 8 GHz, the insertion loss is less than 1 dB typical. The attenuator bit values are 1 (LSB), 2, 4 and 8 dB for a total attenuation of 15 dB. Attenuation accuracy is excellent at ± 0.2 dB typical step error. The attenuator also features a IIP3 of +56dBm. Four TTL/CMOS control inputs are used to select each attenuation state. It can operate with a single Vdd ranging from +3.3V to 5V. Electrical Specifications, TA = +25° C, With Vdd = +5V & Vctl = 0/+5V (Unless Otherwise Noted) Parameter Frequency (GHz) Insertion Loss Attenuation Range Return Loss (RF1 & RF2, All Atten. States) Attenuation Accuracy: (Referenced to Insertion Loss) 1 All States Typ. Max. Units 0.1 - 2.0 GHz 2.0 - 3.0 GHz 3.0 - 4.0 GHz 4.0 -5.5 GHz 5.5 - 8.0 GHz 0.7 0.8 0.8 1.0 1.7 1.1 1.3 1.6 2.6 3.0 dB dB dB dB dB 0.1 - 8 GHz 15 dB 0.1 - 3.5 GHz 3.5 - 5.5 GHz 5.5 - 8 GHz 22 17 12 dB dB dB 0.1 - 1.0 GHz 1.0 - 4.0 GHz 4.0 - 5.0 GHz 5.0 - 5.5 GHz 5.5 GHz - 8 GHz Information furnished furnished by by Analog Analog Devices Devices is is believed believed to to be be accurate Information accurate and and reliable. reliable. However, However, no no responsibility is is assumed assumed by by Analog Analog Devices Devices for for its its use, use, nor nor for responsibility for any any infringements infringements of of patents patents or or other other rights of of third third parties parties that that may may result rights result from from its its use. use. Specifications Specifications subject subject to to change change without without notice. notice. No No license is is granted granted by by implication or otherwise otherwise under under any any patent license implication or patent or or patent patent rights rights of of Analog Analog Devices. Devices. Trademarks and and registered registeredtrademarks trademarksare arethe theproperty propertyofoftheir their respective owners. Trademarks respective owners. Min. ± (0.2 + 2% of Atten. Setting) Max. ± (0.2 + 3% of Atten. Setting) Max. ± (0.3 + 5% of Atten. Setting) Max. ± (0.4 + 8% of Atten. Setting) Max. ± (0.5 + 9% of Atten. Setting) Max. dB dB dB dB For For price, price, delivery, delivery, and and to to place place orders: orders: Analog Analog Devices, Devices, Inc., Inc., One One Technology Technology Way, Way, P.O. P.O. Box Box 9106, 9106, Norwood, Norwood, MA MA 02062-9106 02062-9106 Phone: Phone: 781-329-4700 781-329-4700 •• Order Order online online at at www.analog.com www.analog.com Application Application Support: Support: Phone: Phone: 1-800-ANALOG-D 1-800-ANALOG-D HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz Frequency (GHz) Input Third Order Intercept Point (Two-Tone Input Power= 12 dBm Each Tone) REF - 4 dB States 5 - 15 dB States Switching Characteristics Min. Typ. Units 31 dBm 0.1 - 8 GHz 57 55 dBm 45 129 ns ns DC -8 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) Max. 0.1 - 8 GHz Frequency Response Plots up to 6 GHz Return Loss RF1, RF2 Insertion Loss (Only Major States are Shown) 0 0 -10 RETURN LOSS (dB) INSERTION LOSS (dB) -0.5 -1 -1.5 -2 -20 -30 -40 -2.5 -3 -50 0 1 2 3 4 5 6 0 1 2 FREQUENCY (GHz) +25 C 3 4 5 6 FREQUENCY (GHz) +85 C IL 1 dB -40 C Normalized Attenuation 2 dB 4 dB 8 dB 15 dB Bit Error vs. Attenuation State (Only Major States are Shown) 0 2 1.5 -4 BIT ERROR (dB) NORMALIZED ATTENUATION (dB) ATTENUATORS - SMT Parameter Input Power for 0.1 dB Compression -8 -12 -16 1 0.5 0 -0.5 -20 -1 0 1 2 3 4 5 6 0 4 FREQUENCY (GHz) 1 dB 2 dB 4 dB 8 dB 8 12 16 ATTENUATION STATE (dB) 15 dB 100 MHz 500 MHz 1 GHz 2 GHz 3 GHz 4 GHz 5 GHz 5.5 GHz Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 2 HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz Bit Error vs. Frequency Relative Phase vs. Frequency (Only Major States are Shown) (Only Major States are Shown) 40 30 RELATIVE PHASE (deg) 1 BIT ERROR (dB) ATTENUATORS - SMT 1.5 0.5 0 20 10 0 -10 -20 -0.5 -30 -40 -1 0 1 2 3 4 5 6 0 1 2 1 dB 2 dB 3 4 5 6 FREQUENCY (GHz) FREQUENCY (GHz) 4 dB 8 dB 15 dB 1 dB 2 dB 4 dB 8 dB 15 dB Step Error vs Frequency (Major States) 0.5 0.4 STEP ERROR (dB) 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 0 1 2 3 4 5 6 FREQUENCY (GHz) 1 dB 2 dB 3 4 dB 8 dB 15 dB Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz Frequency Response Plots up to 10 GHz Insertion Loss Return Loss RF1, RF2 (Only Major States are Shown) -10 RETURN LOSS (dB) INSERTION LOSS (dB) -0.5 -1 -1.5 -2 -20 -30 -40 -2.5 -3 -50 0 1 2 3 4 5 6 7 8 9 0 10 1 2 3 FREQUENCY (GHz) +25 C +85 C 5 IL 1 dB -40 C Normalized Attenuation 6 7 8 9 10 2 dB 4 dB 8 dB 15 dB Bit Error vs. Attenuation State (Only Major States are Shown) 0 2 1.5 -4 BIT ERROR (dB) NORMALIZED ATTENUATION (dB) 4 FREQUENCY (GHz) ATTENUATORS - SMT 0 0 -8 -12 -16 1 0.5 0 -0.5 -20 -1 0 1 2 3 4 5 6 7 8 9 10 0 4 FREQUENCY (GHz) 1 dB 2 dB 8 12 16 ATTENUATION STATE (dB) 4 dB 8 dB 15 dB 1 GHz 4 GHz Bit Error vs. Frequency 5 GHz 6 GHz 7 GHz 8 GHz Relative Phase vs. Frequency (Only Major States are Shown) (Only Major States are Shown) 1.5 40 30 RELATIVE PHASE (deg) BIT ERROR (dB) 1 0.5 0 -0.5 20 10 0 -10 -20 -30 -1 -40 0 1 2 3 4 5 6 7 8 9 10 0 1 2 FREQUENCY (GHz) 1 dB 2 dB 4 dB 8 dB 3 4 5 6 7 8 9 10 FREQUENCY (GHz) 15 dB 1 dB 2 dB 4 dB 8 dB 15 dB Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 4 HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz Step Error vs Frequency (Major States) 5 1 STEP ERROR (dB) ATTENUATORS - SMT 1.5 0.5 0 -0.5 -1 -1.5 0 1 2 3 4 5 6 7 8 9 10 FREQUENCY (GHz) 1 dB 2 dB 4 dB 8 dB 15 dB Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz 60 58 58 56 56 54 54 IP3 (dBm) IP3 (dBm) 60 Input Third Order Intercept Point over Temp., 3.3V (100 MHz - 8 GHz) 52 50 52 50 48 48 46 46 44 44 0 1 2 3 4 5 6 7 8 0 1 2 FREQUENCY (GHz) 4 5 6 7 8 -40C +25C +85C -40C 0.1 and 1 dB Input Compression Point, 5V (100 MHz - 8 GHz) 1 dB Input Compression Point, Over Temp., 5V (100 MHz - 8 GHz) INPUT COMPRESSION (dBm) +85C INPUT COMPRESSION (dBm) +25C 3 FREQUENCY (GHz) 36 34 32 30 28 36 26 34 32 30 28 0 1 2 3 4 5 6 7 8 0 1 2 FREQUENCY (GHz) 3 4 5 6 7 8 FREQUENCY (GHz) 0.1 dB 1 dB +25 C 0.1 and 1 dB Input Compression Point, 3.3V (100 MHz - 8 GHz) 36 34 32 30 28 26 24 22 20 +85 C -40 C 1 dB Input Compression Point, Over Temp., 3.3V (100 MHz - 8 GHz) 36 INPUT COMPRESSION (dBm) INPUT COMPRESSION (dBm) ATTENUATORS - SMT Power Handling up to 8 GHz Input Third Order Intercept Point over Temp., 5V (100 MHz - 8 GHz) 34 32 30 28 26 24 22 20 0 1 2 3 4 5 6 7 8 0 1 2 FREQUENCY (GHz) 0.1 dB 3 4 5 6 7 8 FREQUENCY (GHz) 1 dB +25 C +85 C -40 C Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 6 HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz ATTENUATORS - SMT Absolute Maximum Ratings Recommended Operation Ratings RF Input Power at 85 °C +27 dBm RF Input Power at 85 °C +24 dBm RF Input Power at 105 °C +25 dBm RF Input Power at 105 °C +23 dBm Bias Voltage (Vdd) -0.3V to 5.4V Bias Voltage (Vdd) 3V to 5.4V Control Voltage Range (V1 to V4) -0.3V to Vdd +.5V Control Voltage Range (V1 to V4) 0 to Vdd Operating Temperature -40 to +105 °C Channel Temperature 140 °C Thermal Resistance (at maximum power dissipation) 110 °C/W ESD Sensitivity (HBM) Class 2 Storage Temperature -65 to +150 °C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Bias Voltage & Current Truth Table Vdd (V) Idd (Typ.) (mA) +3.3 0.14 +5.0 0.17 Control Voltage 7 State Vdd = +3.3V Vdd = +5V Low 0 to 0.5V @ < 1 uA 0 to +0.8V @ < 1 uA High 2 to 3.3V @ 25 uA 2 to 5V @ 35 uA Control Voltage Input Attenuation State RF1 - RF2 V1 8 dB V2 4 dB V3 2 dB V4 1 dB High High High High Reference I.L. High High High Low 1 dB High High Low High 2 dB High Low High High 4 dB Low High High High 8 dB Low Low Low Low 15 dB Any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz ATTENUATORS - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number Package Body Material Lead Finish HMC540SLP3E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL Rating MSL3 [2] Package Marking [3] H540S XXXX [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 8 HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz ATTENUATORS - SMT Pin Descriptions Pin Number Function Description 1 Vdd Supply Voltage. 2, 11 RF1, RF2 This pin is DC coupled and matched to 50 Ohm. Blocking capacitors are required. Select value based on lowest frequency of operation. 3, 7, 9, 10, 12 N/C These pins should be connected to PCB RF ground to maximize performance. 4 - 6, 8 ACG1 - ACG4 External capacitor to ground is required. Select value for lowest frequency of operation. Place capacitor as close to pins as possible. 13 - 16 V1 - V4 See truth table and control voltage table. GND Package bottom has an exposed metal paddle that must be connected to RF/DC Ground. Interface Schematic Application Circuit Recommended Component Values 9 C1 - C3 1,000 pF ± 10% C4, C5 330 pF ± 10% Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. HMC540SLP3E v00.0915 1 dB LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 0.1 - 8 GHz ATTENUATORS - SMT Evaluation PCB List of Materials for Evaluation PCB EV1HMC540SLP3[1] Item Description J1, J2 PCB Mount SMA Connector TP1 - TP6 Thru Hole Mount Test Point C1, C2, C6 1000 pF Capacitor, 0402 Pkg. C8, C10 330 pF Capacitor, 0402 Pkg. U1 HMC540SLP3E Digital Attenuator PCB [2] 600-01291-00 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Analog Devices upon request. [2] Circuit Board Material: Rogers 4350 Information furnished by Analog is believed to be accurate and reliable. However, For price, delivery, andDevices to place orders: Analog Devices, Inc., One no Technology P.O. and Boxto9106, MA 02062-9106 For price,Way, delivery, placeNorwood, orders: Analog Devices, Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 Phone: 781-329-4700 • Order onlineOne at www.analog.com rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 781-329-4700 • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. 1-800-ANALOG-D Application Support: Phone: Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. 10