EV1HMC545A

HMC545A / 545AE v01.0615 SWITCHES - SMT GaAs MMIC SPDT SWITCH, DC - 3 GHz Typical Applications Features The HMC545A / HMC545AE is ideal for: Low Insertion Loss: 0.27 dB • Cellular/3G Infrastructure High Input IP3: +54 dBm • Private Mobile Radio Handsets Low DC Power Consumption • WLAN, WiMAX & WiBro Positive Control: 0/+3V to 0/+8V • Automotive Telematics Ultra Small Package: SOT26 • Test Equipment Functional Diagram General Description The HMC545A and HMC545AE are low-cost SPDT switches in 6-lead SOT26 plastic packages for use in general switching applications which require very low insertion loss and very small size. With 0.25 dB typical loss, these devices can control signals from DC to 3.0 GHz and are especially suited for IF and RF applications including Cellular/3G, ISM, automotive and portables. The design provides exceptional insertion loss performance, ideal for filter and receiver switching. RF1 and RF2 are reflective shorts when “Off”. The two control voltages require a minimal amount of DC current and offer compatibility with CMOS and some TTL logic families. Electrical Specifications TA = +25° C, Vctl = 0/+5 Vdc (Unless Otherwise Stated), 50 Ohm System Parameter Frequency Insertion Loss DC - 1.0 GHz DC - 2.5 GHz DC - 3.0 GHz Isolation DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz Return Loss DC - 1.0 GHz DC - 2.0 GHz DC - 2.5 GHz DC - 3.0 GHz Input Power for 1 dB Compression Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V 0.5 - 3.0 GHz Input Third Order Intercept (Two-tone Input Power = +17 dBm Each Tone) Vctl = 0/+3V Vctl = 0/+5V Vctl = 0/+8V 0.5 - 3.0 GHz Switching Characteristics 26 22 19 20 27 30 Typ. Max. Units 0.27 0.3 0.4 0.4 0.5 0.7 dB dB dB 31 26 22 dB dB dB 24 20 19 17 dB dB dB dB 23 30 33 dBm dBm dBm 31 51 54 dBm dBm dBm 70 90 ns ns DC - 3.0 GHz tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 1 Min. Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC545A / 545AE v01.0615 GaAs MMIC SPDT SWITCH, DC - 3 GHz Insertion Loss Return Loss 0 -0.5 RETURN LOSS (dB) INSERTION LOSS (dB) -5 -1 -1.5 -10 -15 -20 -25 -30 -35 -2 -40 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 FREQUENCY (GHz) +25 C +85 C 3 3.5 4 RF1, RF2 ON Isolation Between Ports RF1 and RF2 0 0 -5 -5 -10 -10 ISOLATION (dB) ISOLATION (dB) 2.5 RFC -40 C Isolation Between Ports RFC and RF1/RF2 -15 -20 -25 -30 -15 -20 -25 -30 -35 -35 -40 -40 -45 -45 0 0.5 1 1.5 2 2.5 3 3.5 4 0 0.5 1 1.5 FREQUENCY (GHz) 2 2.5 3 3.5 4 FREQUENCY (GHz) RF1 RF2 RF1 ON Input P0.1dB vs. Vctl RF2 ON Input P1dB vs. Vctl 40 40 35 35 30 30 INPUT P1dB (dBm) INPUT P0.1dB (dBm) 2 FREQUENCY (GHz) SWITCHES - SMT 0 25 20 15 25 20 15 10 10 5 5 0 0 0 0.5 1 1.5 2 2.5 3 0 0.5 1 FREQUENCY (GHz) +3V +5V 1.5 2 2.5 3 FREQUENCY (GHz) +8V +3V +5V +8V Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC545A / 545AE v01.0615 GaAs MMIC SPDT SWITCH, DC - 3 GHz Low Frequency Input P1dB vs. Vctl 40 40 35 35 INPUT P1dB (dBm) INPUT P0.1dB (dBm) SWITCHES - SMT Low Frequency Input P0.1dB vs. Vctl 30 25 20 15 30 25 20 15 10 0.01 0.1 1 10 0.01 0.1 FREQUENCY (GHz) +3V +5V +8V +3V Input Third Order Intercept Point vs. Control Voltage 70 65 INPUT IP3 (dBm) 60 55 50 45 40 35 30 25 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) +3V 1 FREQUENCY (GHz) +5V +5V +8V Absolute Maximum Ratings RF Input Power (Vctl = 0/+8V) +34 dBm Control Voltage Range (A & B) -0.2 to +12 Vdc Hot Switch Power Level (Vctl = 0/+8V) +32 dBm Channel Temperature 150 °C Continuous Pdiss (T= 85 °C) (derate 5.6 mW/ °C above 85°C) 0.1 W Thermal Resistance 169°C/W Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class 1A DC blocks are required at ports RFC, RF1 and RF2. +8V ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Insertion Loss, T = +25 °C 70 65 Truth Table INPUT IP3 (dBm) 60 55 Control Input 50 Control Current 45 A B RFC to RF1 40 Low High Off RFC to RF2 On 35 High Low On Off 30 25 0.5 1 1.5 2 2.5 3 FREQUENCY (GHz) +3V 3 +5V +8V Control Voltages State Bias Condition Low 0 to 0.2 Vdc @ 1 µA Typical High +3 Vdc @ 0.5 µA Typical to +8 Vdc @ 14 µA Typical (±0.2 Vdc) Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC545A / 545AE v01.0615 GaAs MMIC SPDT SWITCH, DC - 3 GHz SWITCHES - SMT Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking HMC545A Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H545A HMC545AE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 [2] 545AE [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC545A / 545AE v01.0615 GaAs MMIC SPDT SWITCH, DC - 3 GHz SWITCHES - SMT Typical Application Circuit Notes: 1. Set logic gate Vdd = +3V to +5V and use HCT series logic to provide a TTL driver interface. 2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd of +3V to +8V applied to the CMOS logic gates. 3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation. 4. Highest RF signal power capability is achieved with Vdd = +8V and A/B set to 0/+8V. Pin Descriptions 5 Pin Number Function Description 1, 3, 5 RF2, RF1, RFC These pins are DC coupled and matched to 50 Ohms. Blocking capacitors are required. 2 GND This pin must be connected to RF/DC ground. 4 B See truth and control voltage tables. 6 A See truth and control voltage tables. Interface Schematic Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com HMC545A / 545AE v01.0615 GaAs MMIC SPDT SWITCH, DC - 3 GHz SWITCHES - SMT Evaluation PCB List of Materials for Evaluation PCB EV1HMC545A [1] Item Description J1 - J3 PCB Mount SMA RF Connector J4 - J6 DC Pin R1 - R2 1K Ohm resistor, 0402 Pkg. C1 - C3 330 pF capacitor, 0402 Pkg. U1 HMC545A / HMC545AE SPDT Switch PCB [2] 101659 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB The circuit board used in the application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 Ohm impedance and the package ground leads should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. [2] Circuit Board Material: Rogers 4350 Information furnished by Analog Devices is believed to be accurate and reliable. However, no For price, 2delivery, and to placeChelmsford, orders: Analog MA Devices, Inc., For price, delivery and to place orders: Microwave Corporation, Elizabeth Drive, 01824 responsibility is assumed by Analog Devices for its use, nor for anyHittite infringements of patents or other One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106 rights of third parties that may result from its use. Specifications subject to change without notice. No Phone: 978-250-3343 Fax: 978-250-3373 Phone: Order781-329-4700 On-line at www.hittite.com • Order online at www.analog.com license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Application Support: Phone: 1-800-ANALOG-D Trademarks and registered trademarks are the property of their respective owners. Application Support: Phone: 978-250-3343 or apps@hittite.com 6