EV1HMC8038LP4C

13 NC 14 NC 15 NC FUNCTIONAL BLOCK DIAGRAM HMC8038 VDD 1 12 RF2 50Ω VCTL 2 11 GND 50Ω 10 GND 9 NC 8 NC 7 NC 4 RF1 PACKAGE BASE 13554-001 RFC 3 NC 6 Nonreflective, 50 Ω design High isolation: 60 dB typical Low insertion loss: 0.8 dB typical High power handling 34 dBm through path 29 dBm terminated path High linearity 0.1 dB compression (P0.1dB): 35 dBm typical Input third-order intercept (IP3): 60 dBm typical ESD ratings 4 kV human body model (HBM), Class 3A 1.25 kV charged device model (CDM) Single positive supply 3.3 V to 5 V 1.8 V-compatible control All off state control 16-lead, 4 mm × 4 mm LFCSP (16 mm2) Pin compatible with the HMC849ALP4CE 16 NC FEATURES EN 5 Data Sheet High Isolation, Silicon SPDT, Nonreflective Switch, 0.1 GHz to 6.0 GHz HMC8038 Figure 1. APPLICATIONS Cellular/4G infrastructure Wireless infrastructure Automotive telematics Mobile radios Test equipment GENERAL DESCRIPTION The HMC8038 is a high isolation, nonreflective, 0.1 GHz to 6.0 GHz, silicon, single-pole, double-throw (SPDT) switch in a leadless, surface-mount package. The switch is ideal for cellular infrastructure applications, yielding up to 62 dB of isolation up to 4.0 GHz, a low 0.8 dB of insertion loss up to 4.0 GHz, and 60 dBm of input third-order intercept. Power handling is excellent up to 6.0 GHz, and it offers an input power for an 0.1 dB compression point (P0.1dB) of 35 dBm (VDD = 5 V). On-chip circuitry operates a single, positive supply voltage from 3.3 V to 5 V, as well as a Rev. A single, positive voltage control from 0 V to 1.8 V/3.3 V/5.0 V at very low dc currents. An enable input (EN) set to logic high places the switch in an all off state, in which RFC is reflective. The HMC8038 has ESD protection on all device pins, including the RF interface, and can stand 4 kV HMB and 1.25 kV CDM. The HMC8038 offers very fast switching and RF settling times of 150 ns and 170 ns, respectively. The device comes in a RoHScompliant, compact 4 mm × 4 mm LFCSP. Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2015 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com HMC8038 Data Sheet TABLE OF CONTENTS Features .............................................................................................. 1 Interface Schematics .....................................................................6 Applications ....................................................................................... 1 Typical Performance Characteristics ..............................................7 Functional Block Diagram .............................................................. 1 Insertion Loss, Isolation, and Return Loss ................................7 General Description ......................................................................... 1 Input Compression and Input Third-Order Intercept .............8 Revision History ............................................................................... 2 Theory of Operation .........................................................................9 Specifications..................................................................................... 3 Applications Information .............................................................. 10 Absolute Maximum Ratings............................................................ 5 Outline Dimensions ....................................................................... 11 ESD Caution .................................................................................. 5 Ordering Guide .......................................................................... 11 Pin Configuration and Function Descriptions ............................. 6 REVISION HISTORY 11/15—Rev. 0 to Rev. A Changes to Table 1 ............................................................................ 3 9/15—Revision 0: Initial Version Rev. A | Page 2 of 11 Data Sheet HMC8038 SPECIFICATIONS VDD = 3.3 V to 5 V, VCTL = 0 V/VDD, TA = 25°C, 50 Ω system, unless otherwise noted. Table 1. Parameter INSERTION LOSS ISOLATION RFC to RF1/RF2 (Worst Case) RETURN LOSS On State Off State SWITCHING SPEED tRISE, tFALL tON, tOFF RF SETTLING TIME INPUT POWER 1 dB Compression (P1dB) 0.1 dB Compression (P0.1dB) INPUT THIRD-ORDER INTERCEPT (IP3) RECOMMENDED OPERATING CONDITIONS Bias Voltage Range (VDD) Control Voltage Range (VCTL, EN) Maximum RF Input Power 1 TCASE = 105°C TCASE = 85°C TCASE = 25°C TCASE = −40°C Test Conditions/Comments 0.1 GHz to 2.0 GHz 2.0 GHz to 4.0 GHz 4.0 GHz to 6.0 GHz 0.1 GHz to 2.0 GHz 2.0 GHz to 4.0 GHz 4.0 GHz to 6.0 GHz 55 50 40 Typ 0.7 0.8 0.9 70 60 51 Max 1.0 1.1 1.3 Unit dB dB dB dB dB dB 0.1 GHz to 2.0 GHz 2.0 GHz to 4.0 GHz 4.0 GHz to 6.0 GHz 0.1 GHz to 2.0 GHz 2.0 GHz to 4.0 GHz 4.0 GHz to 6.0 GHz 24 18 18 23 22 16 dB dB dB dB dB dB 10%/90% RFOUT 50% VCTL to 10%/90% RFOUT 50% VCTL to 0.1 dB margin of final RFOUT 60 150 170 ns ns ns VDD = 3.3 V VDD = 5 V VDD = 3.3 V VDD = 5 V Two-tone input power = 14 dBm/tone 34 36 33 35 60 dB dB dB dB dBm 3.0 0 Through Path (5 V/3.3 V) Terminated Path Hot Switching Through Path (5 V/3.3 V) Terminated Path Hot Switching Through Path (5 V/3.3 V) Terminated Path Hot Switching Through Path (5 V/3.3 V) Terminated Path Hot Switching Case Temperature Range (TCASE) 1 Min 31/30 24 24 34/33 27 27 34/33 29 27 34/33 29 27 −40 5.4 VDD V V +105 dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm °C Exposure to levels between the recommended operating conditions and the absolute maximum rating conditions for extended periods may affect device reliability. Rev. A | Page 3 of 11 HMC8038 Data Sheet Table 2. Digital Control Voltages State Input Control Voltage Low (VIL) High (VIH) VDD = 3.3 V (±5% VDD, TCASE = −40°C to +105°C) VDD = 5 V (±5% VDD, TCASE = −40°C to +105°C) 0 V to 0.85 V at