Evaluation Board User Guide
UG-256
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Evaluation Board for a 18-Bit Serial Input, Voltage Output DAC with Integrated
Precision Reference Buffer Amplifiers
FEATURES
DEVICE DESCRIPTION
Full-featured evaluation board for the AD5780
Link options
PC control in conjunction with Analog Devices, Inc., system
development platform
PC software for control
The AD5780 is a high precision, 18-bit DAC with integrated
precision reference buffer amplifiers designed to meet the
requirements of precision control applications. The output
range of the AD5780 is configured by two reference voltage
inputs. The device is specified to operate with a dual power
supply of up to 33 V.
EVALUATION BOARD DESCRIPTION
Complete specifications for the AD5780 are provided in the
AD5780 data sheet, available from Analog Devices, and should
be consulted in conjunction with this user guide when using the
evaluation board.
The EVAL-AD5780 is a full-featured evaluation board, designed
to allow the user to easily evaluate all features of the AD5780
voltage output, 18-bit digital-to-analog converter (DAC). The
AD5780 pins are accessible at on-board connectors for external
connection. The board can be controlled by two means: via the
on-board connector (J3), or via the system development platform
connector (J4). The SDP board allows the evaluation board to be
controlled through the USB port of a Windows® XP- (SP2 or later)
or Vista-based (32-bit) PC using the AD5780 evaluation software.
FUNCTIONAL BLOCK DIAGRAM
POWER SUPPLY INPUTS
PC
USB
PORT
EXT
+10V
+5V
VREFP
SYSTEM
DEVELOPMENT
PLATFORM BOARD
RFB
AD5780
INV
VOUT_BUF
VOUT
AD8675
VREFN
VOUT
–5V
–10V
0V
EXT
09726-001
PIN HEADER (J3)
Figure 1.
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. A | Page 1 of 20
UG-256
Evaluation Board User Guide
TABLE OF CONTENTS
Features .............................................................................................. 1
Evaluation Board Software ...............................................................5
Evaluation Board Description......................................................... 1
Software Installation .....................................................................5
Device Description ........................................................................... 1
Software Operation .......................................................................5
Functional Block Diagram .............................................................. 1
Main Window ................................................................................6
Revision History ............................................................................... 2
Evaluation Board Performance ........................................................8
Evaluation Board Hardware ............................................................ 3
Evaluation Board Schematics and Artwork ...................................9
Power Supplies .............................................................................. 3
Ordering Information .................................................................... 15
Link Options ................................................................................. 3
Bill of Materials ........................................................................... 15
On-Board Connectors ................................................................. 3
REVISION HISTORY
7/12—Rev. 0 to Rev. A
Changed ADR445 to ADR4550 (Throughout) ............................ 3
Changes to Evaluation Board Schematics and Artwork Section . 9
11/11—Revision 0: Initial Version
Rev. A | Page 2 of 20
Evaluation Board User Guide
UG-256
EVALUATION BOARD HARDWARE
POWER SUPPLIES
Connector J3 Pin Descriptions
The following external supplies must be provided:
Table 2. Connector J3 Pin Configuration
•
9
10
•
•
5 V between the VCC and DGND inputs for the digital
supply of the AD5780. Alternatively, place Link 1 in
Position A to power the digital circuitry from the USB
port via the SDP board (default).
7.5 V to 16.5 V between the VDD and AGND inputs for
the positive analog supply of the AD5780.
−2.5 V to −16.5 V between the VSS and AGND inputs for
the negative analog supply of the AD5780.
The analog and digital planes are connected at one location, close
to the AD5780. To avoid ground loop problems, it is recommended
not to connect AGND and DGND elsewhere in the system.
Each supply is decoupled to the relevant ground plane with 10 µF
and 0.1 µF capacitors. Each device supply pin is again decoupled
with a 10 µF and 0.1 µF capacitor pair to the relevant ground plane.
7
8
5
6
3
4
1
2
Table 3. Connector J3 Pin Descriptions
Pin No.
1
2
3
4
5
6
7
8
9
10
Description
SDO
RESET
DGND
CLR
DGND
LDAC
SDIN
DGND
SCLK
SYNC
LINK OPTIONS
The link options on the evaluation board should be set for the
required operating setup before using the board. The functions
of the link options are described in Table 5.
Default Link Option Setup
The default link options are listed in Table 1. By default, the
board is configured with VREFP = +10 V and VREFN = −10 V for
a ±10 V output range.
Table 1. Default Link Options
Link No.
LK1
LK2
LK3
LK4
LK5
LK6
LK7
LK8
LK9
LK11
Option
A
B
A
Removed
Removed
Removed
Removed
C
Inserted
Inserted
ON-BOARD CONNECTORS
There are nine connectors on the AD5780 evaluation board
PCB as outlined in Table 4.
Table 4. On-Board Connectors
Connector
J1
J2
J3
J4
VOUT
VOUT_BUF
VREF
VREFN
VREFP
Rev. A | Page 3 of 20
Function
Digital power supply connector
Analog power supply connector
Digital interface pin header connector
SDP board connector
DAC output connector
Buffered DAC output connector
+5 V external reference voltage input connector
(+10 V, +5 V, −10 V, and −5 V reference voltages are
generated from this +5 V input or on-board
ADR4550)
DAC negative reference input connector
DAC positive reference input connector
UG-256
Evaluation Board User Guide
Table 5. Link Options
Link No.
LK1
LK2
LK3
LK4
LK5
Description
This link selects the source of the digital power supply.
Position A selects the source from the SDP board.
Position B selects the source from Connector J1.
This link selects the positive reference voltage source.
Position A selects an on-board generated +5 V.
Position B selects an on-board generated +10 V.
Position C selects an external voltage applied at Connector VREFP.
This link is used in conjunction with LK4 to configure the mode of operation of the output amplifier.
Position A configures the amplifier in unity gain. LK4 should be removed. 1
Position B configures the amplifier for a gain of 2. Lk4 should be inserted. 2
This link is used in conjunction with LK3 to configure the mode of operation of the output amplifier.
When this link is inserted, LK3 should be in Position B to configure the amplifier for a gain of 2.2
When this link is removed, LK3 should be in Position A to configure the amplifier for unity gain.1
This link selects the state of the RESET pin.
When this link is inserted, RESET is at logic low.
When this link is removed, RESET is at logic high.
LK6
This link selects the state of the CLR pin.
When this link is inserted, CLR is at logic low.
When this link is removed, CLR is at logic high.
LK7
This link selects the state of the LDAC pin.
When this link is inserted, LDAC is at logic low.
When this link is removed, LDAC is at logic high.
LK8
This link selects the negative reference voltage source.
Position A selects an on-board generated −5 V.
Position B selects AGND.
Position C selects an on-board generated −10 V.
Position D selects an external voltage applied at Connector VREFN.
This link connects the output of Voltage Reference U5 to the reference scaling circuitry.
This link connects the DAC output to the noninverting input of the output buffer amplifier.
When this link is inserted, the DAC output is connected to the noninverting input of the output amplifier.
When this link is removed, the DAC output is disconnected from the noninverting input of the output buffer amplifier and the
DAC output voltage is accessible at the VOUT connector.
LK9
LK11
1
2
The RBUF bit of the control register must be set to high to enable the unity gain mode of operation.
The RBUF bit of the control register must be cleared to low to enable the gain of 2 mode of operation.
Rev. A | Page 4 of 20
Evaluation Board User Guide
UG-256
EVALUATION BOARD SOFTWARE
SOFTWARE INSTALLATION
SOFTWARE OPERATION
The AD5780 evaluation kit includes self-installing software on
a CD. The software is compatible with Windows XP (SP2) and
Vista (32-bit). If the setup file does not run automatically, you
can run the setup.exe file from the CD.
To launch the software, complete the following steps:
Install the evaluation software before connecting the evaluation
board and SDP board to the USB port of the PC to ensure that
the evaluation system is correctly recognized when connected to
the PC.
2.
09726-002
2.
After installation from the CD is complete, power up the
AD5780 evaluation board as described in the Power Supplies
section. Connect the SDP board (via either Connector A or
Connector B) to the AD5780 evaluation board and then
to the USB port of your PC using the supplied cable.
When the evaluation system is detected, proceed through any
dialog boxes that appear. This completes the installation.
From the Start menu, select Analog Devices – AD5780 >
AD5780 Evaluation Software. The main window of the
software then displays (see Figure 3).
If the evaluation system is not connected to the USB port
when the software is launched, a connectivity error displays
(see Figure 2). Connect the evaluation board to the USB
port of the PC, wait a few seconds, click Rescan, and follow
the instructions.
Figure 2. Connectivity Error Alert
09726-003
1.
1.
Figure 3. Main Window
Rev. A | Page 5 of 20
UG-256
Evaluation Board User Guide
MAIN WINDOW
The main window is divided into three tabs: Configure,
Program Voltage, and Measure DAC Output.
Configure
The Configure section allows access to the control register,
clearcode register, software control register, and DAC register
and also allows control of the RESET, CLR, and LDAC pins.
Program Voltage
09762-004
The Program Voltage section programs the DAC register with
a value calculated from the entered values: the positive voltage
reference (VREFP), the negative voltage reference (VREFN),
and the desired output voltage (see Figure 4).
To begin the measurement, click START. The measurement can
be halted at any time by clicking STOP. When the measurement
is completed, a dialog box appears to allow the data to be saved
as a spreadsheet file with three columns of data. The first column is
the DAC code, the second column is the DAC voltage in volts,
and the third column is the INL error in LSBs, as shown in
Figure 5. A graph of both the DAC output voltage vs. the DAC
code and the INL error vs. the DAC code is displayed on-screen
(see Figure 6). In the measurement example shown in Figure 6,
measurements are taken in 1024 code steps beginning at Code 0
and finishing at Code 262,143 in total 256 measurements. With
the number of power line cycles (NPLC) setting on the multimeter
set to 1, the measurement takes ~18 sec to complete. To complete
an all codes measurement requiring 262,144 measurement
points takes ~6 hours to complete.
Figure 4. Program Voltage Window
Measure DAC Output
The multimeter is controlled over a general-purpose interface
bus (GPIB). Once connected to the PC, first configure the
multimeter via its front panel before taking a measurement.
Figure 6 shows the measurement options. The software runs
through a sequence of steps, programming the DAC register
and measuring the DAC output voltage. The sequence begins
with the software programming the DAC with the Start Code
value, incrementing the programmed value at each step by the
Code Step value, and finishing when the programmed value
reaches the Stop Code value. A delay between measurements
can be inserted, if required. The GPIB address of the multimeter
must be specified.
09726-005
The Measure DAC Output section allows the PC to control an
Agilent 3458A multimeter to measure and log the DAC output
voltage.
Figure 5. Saved Data Format
If an Agilent 3458A multimeter is not connected to the PC,
the software steps through the codes without taking any
measurements.
Rev. A | Page 6 of 20
UG-256
09726-006
Evaluation Board User Guide
Figure 6. Measure DAC Output Window
Rev. A | Page 7 of 20
UG-256
Evaluation Board User Guide
EVALUATION BOARD PERFORMANCE
The following data demonstrates the measured linearity performance
of the AD5780 evaluation board circuit. The board is powered
from VDD = +15 V and VSS = −15 V. VREFP = +10 V and VREFN =
−10 V are both generated from the on-board voltage reference.
0.8
0.6
DNL ERROR (LSB)
1.0
0.8
0.6
0.4
0.4
0.2
0
–0.2
–0.4
0.2
–0.6
0
–1.0
0
–0.4
–0.6
50000
100000
150000
DAC CODE
200000
Figure 8. DNL Error vs. DAC Code
–0.8
–1.0
0
50000
100000
150000
DAC CODE
200000
250000
Figure 7. INL Error vs. DAC Code
Rev. A | Page 8 of 20
250000
09726-008
–0.8
–0.2
09726-007
INL ERROR (LSB)
1.0
Evaluation Board User Guide
UG-256
EVALUATION BOARD SCHEMATICS AND ARTWORK
09726-009
Figure 9. Schematic of the AD5780 Circuitry
Rev. A | Page 9 of 20
UG-256
Evaluation Board User Guide
09726-010
Figure 10. Schematic of the Voltage Reference Circuitry
Rev. A | Page 10 of 20
Evaluation Board User Guide
UG-256
09726-011
Figure 11. Schematic of the SDP Board Connector
Rev. A | Page 11 of 20
Evaluation Board User Guide
09726-012
UG-256
09726-013
Figure 12. Component Placement Schematic
Figure 13. Top Printed Circuit Board (PCB) Layer Schematic
Rev. A | Page 12 of 20
UG-256
09726-014
Evaluation Board User Guide
09726-015
Figure 14. Inner First PCB Layer Schematic
Figure 15. Inner Second PCB Layer Schematic
Rev. A | Page 13 of 20
Evaluation Board User Guide
09726-016
UG-256
Figure 16. Bottom PCB Layer Schematic
Rev. A | Page 14 of 20
Evaluation Board User Guide
UG-256
ORDERING INFORMATION
BILL OF MATERIALS
Table 6.
Reference Designator
C2
C3
C4
C5
C6
C8
C9
C10
C11
C13
C14
C16
C17
C18
C19
C20
C21
C22
C23
C24
C31
C32
C33
C34
C35
C36
C37
C38
C39
C40
C41
C42
C43
J1
J2
J3
J4
L1
L2
L3
L4
LK1
Part Description
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor, 0603, 0.1 µF, 16V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor+, 10 µF, 16 V, 10%, Case B
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor, 0603, 0.1 µF, 16 V
Capacitor+, 10 µF, 16 V, 10%, Case B
2-pin terminal block (5 mm pitch) CON\POWER
3-pin terminal block (5 mm pitch) CON\POWER3
20-pin (2 × 10) header
120-way connector, 0.6 mm pitch,
SDP-STANDARD-CONN
Ferrite Bead IND
Ferrite Bead IND
Ferrite Bead IND
Ferrite Bead IND
3-pin SIL header and shorting link
LK2
6-pin (3 × 2) 0.1" header and shorting block
LK3
3-pin SIL header and shorting link
LK4
2-pin (0.1" pitch) header and shorting shunt
Part Number
CM105X7R104K16AT
TAJB106K016R
TAJB106K016R
CM105X7R104K16AT
CM105X7R104K16AT
TAJB106K016R
TAJB106K016R
CM105X7R104K16AT
CM105X7R104K16AT
CM105X7R104K16AT
TAJB106K016R
TAJB106K016R
CM105X7R104K16AT
TAJB106K016R
CM105X7R104K16AT
CM105X7R104K16AT
TAJB106K016R
TAJB106K016R
CM105X7R104K16AT
CM105X7R104K16AT
TAJB106K016R
TAJB106K016R
TAJB106K016R
CM105X7R104K16AT
CM105X7R104K16AT
CM105X7R104K16AT
TAJB106K016R
TAJB106K016R
TAJB106K016R
CM105X7R104K16AT
CM105X7R104K16AT
CM105X7R104K16AT
TAJB106K016R
CTB5000/2
CTB5000/3
Not applicable
FX8-120S-SV(21)
Stock Code
FEC 9406140
FEC 498737
FEC 498737
FEC 9406140
FEC 9406140
FEC 498737
FEC 498737
FEC 9406140
FEC 9406140
FEC 9406140
FEC 498737
FEC 498737
FEC 9406140
FEC 498737
FEC 9406140
FEC 9406140
FEC 498737
FEC 498737
FEC 9406140
FEC 9406140
FEC 498737
FEC 498737
FEC 498737
FEC 9406140
FEC 9406140
FEC 9406140
FEC 498737
FEC 498737
FEC 498737
FEC 9406140
FEC 9406140
FEC 9406140
FEC 498737
FEC 151789
FEC 151790
FEC 1022244 (36 + 36 pin strip)
FEC 1324660
74279204
74279204
74279204
74279204
M20-9990345 and
M7567-05
M20-9983646 and
M7566-05
M20-9990345 and
M7567-05
M20-9990246
FEC 1635719
FEC 1635719
FEC 1635719
FEC 1635719
FEC 1022248 and 150410
Rev. A | Page 15 of 20
FEC 148-535 and 150-411 (36-pin strip)
FEC 1022248 and 150410
FEC 1022247 and 150-411
UG-256
Evaluation Board User Guide
Reference Designator
LK5
LK6
LK7
LK8
Part Description
2-pin (0.1" pitch) header and shorting shunt
2-pin (0.1" pitch) header and shorting shunt
2-pin (0.1" pitch) header and shorting shunt
8-pin (4 × 2) 0.1" header and shorting block
LK9
LK11
R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13
R15
R16
R17
R18
R19
R20
R21
R22
TP1
TP2
TP3
TP4
TP5
TP6
TP7
U1
U2
U9
U4
U5
U6
U8
VOUT
VOUT_BUF
VREF
VREFN
VREFP
2-pin (0.1" pitch) header and shorting shunt
2-pin (0.1" pitch) header and shorting shunt
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
SMD resistor
Resistor, 1 kΩ, 0805, 5 ppm
Resistor, 1 kΩ, 0805, 5 ppm
Resistor, 2 kΩ, 0805, 5 ppm
Resistor, 1 kΩ, 0805, 5 ppm
Resistor, 0805, 680 Ω
Resistor, 1 kΩ, 0805, 5 ppm
Resistor, 1 kΩ, 0805, 5 ppm
Resistor, 0805, 510 Ω
Resistor, 0805, 1.5 kΩ
Red test point
Red test point
Red test point
Red test point
Red test point
Red test point
Red test point
18-bit DAC
Single op amp
Dual op amp
64k I2C serial EEPROM
5 V reference
Single, 8-pin op amp
Dual op amp
Straight PCB mount SMB jack, 50 Ω
Straight PCB mount SMB jack, 50 Ω
Straight PCB mount SMB jack, 50 Ω
Straight PCB mount SMB jack, 50 Ω
Straight PCB mount SMB jack, 50 Ω
Part Number
M20-9990246
M20-9990246
M20-9990246
M20-9983646 and
M7566-05
M20-9990246
M20-9990246
MC 0.063W 0603 10k
MC 0.063W 0603 10k
MC 0.063W 0603 10k
MC 0.063W 0603 10k
MC 0.063W 0603 0R
MC 0.063W 0603 0R
MC 0.063W 0603 0R
MC 0.063W 0603 0R
MC 0.063W 0603 0R
MC 0.063W 0603 0R
MC 0.063W 0603 0R
MC 0.063W 0603 0R
PCF0805-13-1K-B-T1
PCF0805-13-1K-B-T1
PCF0805-13-2K-B-T1
PCF0805-13-1K-B-T1
MC 0.1W 0805 5% 680R
PCF0805-13-1K-B-T1
PCF0805-13-1K-B-T1
MC 0.1W 0805 5% 510R
MC 0.1W 0805 5% 1K5
20-2137
20-2137
20-2137
20-2137
20-2137
20-2137
20-2137
AD5780BCPZ
AD8675ARZ
AD8676BRZ
24LC64-ISN
ADR4550BRZ
AD8675ARZ
AD8676BRZ
1-1337482-0
1-1337482-0
1-1337482-0
1-1337482-0
1-1337482-0
Rev. A | Page 16 of 20
Stock Code
FEC 1022247 and 150-411
FEC 1022247 and 150-411
FEC 1022247 and 150-411
FEC 1022244 and 150-411 (36-pin strip)
FEC 1022247 and 150-411
FEC 1022247 and 150-411
FEC 9331700
FEC 9331700
FEC 9331700
FEC 9331700
FEC 9331662
FEC 9331662
FEC 9331662
FEC 9331662
FEC 9331662
FEC 9331662
FEC 9331662
FEC 9331662
FEC 31108863
FEC 31108863
FEC 1108872
FEC 31108863
FEC 9334785
FEC 31108863
FEC 31108863
FEC 9334637
FEC 9333924
FEC 240-333
FEC 240-333
FEC 240-333
FEC 240-333
FEC 240-333
FEC 240-333
FEC 240-333
AD5780BCPZ
AD8675ARZ
AD8676BRZ
FEC 9758070
ADR4550BRZ
AD8675ARZ
AD8676BRZ
FEC 1206013
FEC 1206013
FEC 1206013
FEC 1206013
FEC 1206013
Evaluation Board User Guide
UG-256
NOTES
Rev. A | Page 17 of 20
UG-256
Evaluation Board User Guide
NOTES
Rev. A | Page 18 of 20
Evaluation Board User Guide
UG-256
NOTES
Rev. A | Page 19 of 20
UG-256
Evaluation Board User Guide
NOTES
ESD Caution
ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection
circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality.
Legal Terms and Conditions
By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions
set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you
have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc.
(“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal,
temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided
for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional
limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term
“Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including
ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may
not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to
promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any
occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board.
Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice
to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO
WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED
TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL
PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF
THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE
AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable
United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of
Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby
submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed.
©2011–2012 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
UG09726-0-7/12(A)
Rev. A | Page 20 of 20
工商网监
湘ICP备2023018690号
