EVAL-ADM3052EBZ

Evaluation Board User Guide UG-221 One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com Evaluation Board for the ADM3052 Isolated CAN Transceiver with Integrated High Voltage, Bus Side Linear Regulator FEATURES EVAL-ADM3052EBZ 09549-001 Easy evaluation of the ADM3052 Isolated, controller area network (CAN) transceiver Integrated bus side linear regulator (V+) Bus side powered by V+ and V− 11 V to 25 V operation on V+ 5 V or 3.3 V operation on VDD1 High speed data rates up to 1 Mbps Connect 110 or more nodes on the bus APPLICATIONS Figure 1. CAN data buses Industrial field networks DeviceNet applications EVALUATION KIT CONTENTS EVAL-ADM3052EBZ GENERAL DESCRIPTION The EVAL-ADM3052EBZ allows quick and easy evaluation of the ADM3052 isolated CAN transceiver. The evaluation board allows all the input and output functions of the ADM3052 to be exercised without the need for external components. The ADM3052 is an isolated CAN, physical layer transceiver with a V+ integrated linear regulator. The ADM3052 complies with the ISO 11898 standard. The device uses Analog Devices, Inc., iCoupler® technology to combine a 3-channel isolator, a CAN transceiver, and a linear regulator into a single, 16-lead, wide body SOIC package. The power is isolated between a single 3.3 V or 5 V supply on VDD1, the logic side, and a single 24 V supply provided on V+, the bus side. The linear regulator takes the V+ bus power and regulates it down to 5 V. The linear regulator uses two regulation loops to share the power dissipation between the internal die and an external resistor (R1), which reduces the internal heat dissipation in the package. This 300 Ω external resistor should be capable of dissipating 750 mW of power and have a tolerance of 1%. Full details on the ADM3052 are provided in the ADM3052 data sheet available from Analog Devices, Inc., which should be consulted in conjunction with this evaluation board user guide. PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. A | Page 1 of 8 UG-221 Evaluation Board User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Evaluation Board Configuration .....................................................3 Applications ....................................................................................... 1 Setting Up the Evaluation Board .................................................3 Evaluation Kit Contents ................................................................... 1 Evaluation Board Schematic and Layout........................................4 EVAL-ADM3052EBZ ....................................................................... 1 Ordering Information .......................................................................6 General Description ......................................................................... 1 Bill of Materials ..............................................................................6 Revision History ............................................................................... 2 Related Links ..................................................................................6 REVISION HISTORY 10/13—Rev. 0 to Rev. A Changes to R1; Table 1 ..................................................................... 6 12/11—Revision 0: Initial Version Rev. A | Page 2 of 8 Evaluation Board User Guide UG-221 EVALUATION BOARD CONFIGURATION SETTING UP THE EVALUATION BOARD An example operation of the EVAL-ADM3052EBZ is shown in Figure 3. Connect a signal generator on TXD and set up a 500 kHz square wave clock with output swing between 0 V and 5 V. Connect the scope probes to the CANH and CANL test points. A plot of the oscilloscope for TXD, CANH, and CANL is shown in Figure 2. Channel 1 shows the TXD signal, and Channel 2 and Channel 3 show the CANH and CANL signals, respectively. The EVAL-ADM3052EBZ allows the ADM3052 isolated CAN transceiver to be quickly and easily evaluated. The evaluation board allows all of the input and output functions to be exercised without the need for external components. On the EVAL-ADM3052EBZ, the power is isolated between a single 3.3 V or 5 V supply on VDD1, the logic side, and a single 24 V supply provided on V+, the bus side. R1, the 300 Ω external resistor, is used by the built-in linear regulator to share the power dissipation between R1 and the internal die to reduce the internal heat dissipation in the package. The bus voltage sense pin (V+SENSE), detects when V+ is connected on the bus side. A low on V+SENSE indicates that power is available on the bus side, and a high on V+SENSE indicates that power is absent from the bus side. 1 VDD1 is the power supply of the logic side. A 22 µF decoupling capacitor, C5, is fitted between VDD1 and GND1. A capacitor of 1 µF is fitted on the CINT pin. A 100 nF capacitor, C6, is fitted between V+ and V−, and a 10 µF capacitor, C7, is fitted between V+R and V−. 09549-003 3 CH1 2.00V CH2 2.00V M1.00µs CH1 CH3 2.00V Figure 2. TXD, CANH, and CANL Signals EVAL-ADM3052EBZ V+ V+ TXD INPUT V+SENSE RXD TXD VDD1 SIGNAL GENERATOR VDD1 AGND GND1 V+R CANH POWER SUPPLY 2 24V CANL VREF V– V– OSCILLOSCOPE Figure 3. Basic Isolated CAN Transceiver Evaluation Board Operation Rev. A | Page 3 of 8 09549-002 POWER SUPPLY 1 3.3V OR 5V 2.52V UG-221 Evaluation Board User Guide EVALUATION BOARD SCHEMATIC AND LAYOUT V+ 100nF TXD CANH V+R RXD GND1 J3-4 V– V+ V+R CINT CANH CANL VREF V– 16 15 14 13 12 11 10 9 CANH SHIELD CANL J2-1 GND1 C3 47nF 1M C2 C1 V- V- R4 GND1 + 10nF VDD1 J2-2 10uF C5 J1-2 V- 09549-008 Figure 4. EVAL-ADM3052EBZ Schematic Figure 5. EVAL-ADM3052EBZ Silkscreen 09549-010 J1-1 J2-3 10uF C7 22uF J2-4 V- ADM3052 C4 100nF NC GND1 GND1 V+SENSE RxD TxD VDD1 GND1 Figure 6. EVAL-ADM3052EBZ Component Side Rev. A | Page 4 of 8 V09549-011 VDD1 GND1 V- 30 1 2 3 4 5 6 7 8 V+SENSE J3-3 VDD1 VREF CANL U1 V+SENSE R3 TXD 30 RXD R2 J3-2 R1 C6 J3-1 J2-5 300 V+ UG-221 09549-009 Evaluation Board User Guide Figure 7. EVAL-ADM3052EBZ Solder Side Rev. A | Page 5 of 8 UG-221 Evaluation Board User Guide ORDERING INFORMATION BILL OF MATERIALS Table 1. Quantity Reference Designator Description Supplier/Part Number 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 7 1 2 C1 C2 C3 C4 C5 C6 C7 CANH CANL J1 J2 J3 R1 R2 R3, R4 RXD, TXD, V+, V+R, V+SENSE, VDD1, VREF U1 GND1, V− Capacitor, 10 nF, 1206 Capacitor, 10 µF, 0603 Capacitor, 47 nF, 0805 Capacitor, 100 nF, 0603 Capacitor, 22 µF, RTAJ_C Capacitor, 100 nF, 1210 Capacitor, 10 µF, 1210 Test point Test point Connector\POWER Connector\POWER5 Connector\POWER4 Resistor, 300 Ω, 2010 Resistor, 1 MΩ, 1206 Resistor, 30 Ω, 0805 Test point 16-lead SOIC_W Test point AVX Corporation/12067C103KAT1A KEMET/C0603C106M9PACTU AVX Corporation/08055C473KAT2A AVX Corporation/06033C104JAT2A AVX Corporation/TAJB226K016R KEMET/C1210C104J5GACTU Multicomp/MCCA000492 Vero Technologies/20-313137 Vero Technologies/20-313137 Lumberg/KRM 02 Lumberg/KRE 05 Lumberg/KRM 04 Multicomp/MCPWR10FTEQ3000 Yageo (Phycomp)/RV1206JR-071ML Multicomp/MC 0.1W 0805 1% 30R Vero Technologies/20-313137 Analog Devices/ADM3052BRWZ Vero Technologies/20-2137 RELATED LINKS Resource ADM3052 Description Product Page, Isolated CAN Transceiver with Integrated High Voltage, Bus-Side, Linear Regulator Rev. A | Page 6 of 8 Evaluation Board User Guide UG-221 NOTES Rev. A | Page 7 of 8 UG-221 Evaluation Board User Guide NOTES ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. ©2011–2013 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG09549-0-10/13(A) Rev. A | Page 8 of 8