EVAL-ADT7320FBZ

EVAL-ADT7x20EBZ User Guide UG-138 One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com Evaluating the ADT7320/ADT7420 Temperature Sensors FEATURES GENERAL DESCRIPTION Supports the ADT7320 and ADT7420 temperature sensors Powered from USB port—no additional power supply required PC software for control of temperature sensors Supported operating systems: Windows 2000 and higher Additional external evaluation board for remote temperature measurements (ADT7x20MBZ) Additional external flex boards for faster thermal response This user guide describes the EVAL-ADT7x20EBZ, ADT7320FBZ, and ADT7420FBZ evaluation board hardware and software and includes detailed schematics and PCB layout artwork. The ADT7x20 (EVAL-ADT7x20EBZ) evaluation board is a compact, easy-to-use platform for evaluating all features of the ADT7320 and ADT7420 temperature sensors. EVALUATION KIT CONTENTS Fully fitted printed circuit board (PCB) with USB interface Additional external PCB Evaluation software CD USB cable Documentation Wiring guide OPTIONAL EQUIPMENT ADT7320FBZ flex board ADT7420FBZ flex board The ADT7x20FBZ flex boards are optional extras to the evaluation kit, which can be used as an extension to the ADT7x20 evaluation board or as standalone devices for interfacing with a microcontroller or FPGA. The evaluation kit allows the user to evaluate the performance of the ADT7320 and ADT7420 temperature sensors using a PC. The kit consists of two boards; a main board connected to the PC through the USB port and an external board. The external board and flex board are attached to the main board using wires that can withstand high temperatures, and can be used for remote temperature measurements in oil baths or ovens where the temperature exceeds the specifications of the USB cable. The evaluation software allows the user to select the main board or the external board, as well as the desired temperature sensor device. 09023-001 When using the ADT7x20 evaluation board, in addition to this user guide, the user should also consult the ADT7320 and ADT7420 data sheets (available at the Analog Devices, Inc., website, www.analog.com). Figure 1. ADT7x20 Evaluation Board—Main Board PLEASE SEE THE LAST PAGE FOR AN IMPORTANT WARNING AND LEGAL TERMS AND CONDITIONS. Rev. B | Page 1 of 16 UG-138 EVAL-ADT7x20EBZ User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Device Selection ............................................................................4 Evaluation Kit Contents ................................................................... 1 Board Selection ..............................................................................4 Optional Equipment......................................................................... 1 Device Evaluation Software .........................................................5 General Description ......................................................................... 1 Wiring Guidelines .............................................................................8 Revision History ............................................................................... 2 Evaluation Board Schematics and Artwork ...................................9 External Board Photographs ........................................................... 3 Ordering Information .................................................................... 15 Evaluation Board Software .............................................................. 4 Bill of Materials ........................................................................... 15 Software Installation .................................................................... 4 Related Links ................................................................................... 16 Using the ADT7x20 Evaluation Software ................................. 4 REVISION HISTORY 10/14—Rev. A to Rev. B Changes to Table 2 ............................................................................ 8 Changed Figure 25, Figure 26, Figure 27 Captions .................... 14 8/13—Rev. 0 to Rev. A Added Optional ADT7320FBZ and ADT7420FBZ Flex Boards .......................................................................... Universal 12/12—Revision 0: Initial Version Rev. B | Page 2 of 16 EVAL-ADT7x20EBZ User Guide UG-138 09023-002 EXTERNAL BOARD PHOTOGRAPHS 09023-103 Figure 2. ADT7x20 Evaluation Board—External Board 09023-104 Figure 3. ADT7320FBZ Evaluation Board—External Board Figure 4. ADT7420FBZ Evaluation Board—External Board Rev. B | Page 3 of 16 UG-138 EVAL-ADT7x20EBZ User Guide EVALUATION BOARD SOFTWARE SOFTWARE INSTALLATION DEVICE SELECTION The ADT7x20 evaluation kit includes the evaluation software on a CD-ROM. The software is compatible with Windows® 2000/XP, Vista, and Windows 7. The evaluation software must be installed before connecting the evaluation board to the USB port of the PC to ensure that Windows recognizes it and to ensure that the driver is installed correctly. To install the software, run the ADT7x20 Evaluation Software Install.exe file from the CD-ROM. When the evaluation software is launched, a window appears prompting you to select the desired device, as shown in Figure 5. 09023-003 After the installation has completed, connect the ADT7x20 evaluation board to the PC USB port using the cable supplied. When the evaluation board is detected by the operating system, proceed through any dialog boxes that appear to finalize the installation. USING THE ADT7x20 EVALUATION SOFTWARE During installation, a shortcut to the evaluation software is installed in the Start menu. From the Start menu, select All Programs, then Analog Devices, and click ADT7x20 Evaluation Software. You can launch the software using either this shortcut or by running the ADT7x20 Evaluation Software.exe file from the installation directory. Figure 5. Device Selection Window The ADT7320 uses the SPI interface whereas the ADT7420 uses the I2C. Other than the control interface, the two devices are identical in performance. BOARD SELECTION The device selected at the previous step in the Device Selection section can be located either on the main board or on the external board. 09023-004 After the desired device is selected, a window appears prompting you to select the location of the device (see Figure 6). Figure 6. On-Board/External Device Selection Window Rev. B | Page 4 of 16 EVAL-ADT7x20EBZ User Guide UG-138 DEVICE EVALUATION SOFTWARE Configuration Register After you complete the device and board selections, the evaluation software loads, allowing full control over the selected device. The software layout is the same for both the ADT7320 and ADT7420. There are three tabs in the evaluation software: This tab allows you full control over the configuration register of the selected device, as shown in Figure 7. At startup, the evaluation software initializes the configuration register to the default value of 0x90 (hexadecimal). For more details on how to set the configuration register, consult the device data sheet.    Configuration Register Temperature Monitor ADT7x20 Registers 09023-005 The evaluation software also has Easy Setup and Close options. Figure 7. Configuration Register Tab Rev. B | Page 5 of 16 UG-138 EVAL-ADT7x20EBZ User Guide Temperature Monitor Temperature Value This tab displays the temperature reading from the selected device as well as the status of the alarms. This tab includes five control options (see Figure 8): This displays the actual ADC temperature in twos complement and degrees Celsius respectively.      Temperature Threshold Temperature Value Set Temperature Limits Log Data Temperature Values Temperature Threshold This section allows you to update the high, low, critical, and hysteresis limits. These ADC values are loaded into the device. Because the conversion format is twos complement, any value over 4095 is a negative number. To change the value, you can use the arrow keys or type a number in the box to update the limits. The graph labeled Temperature Conversion Measurement displays the variation in time of the high and low temperature limits as well as the current temperature in twos complement format. At startup, the evaluation software initializes the temperature limits registers (THIGH, TLOW, TCRIT, and THYST) to the default values shown in Figure 6. 09023-006 If the temperature goes above or below the high and low limits defined in the Set Temperature Limits section or above the critical threshold, the Temperature High Limit Threshold, Temperature Low Limit Threshold, and Temperature Critical Threshold indicators appear green. Set Temperature Limits Figure 8. Temperature Monitor Rev. B | Page 6 of 16 EVAL-ADT7x20EBZ User Guide UG-138 Log Data Temperature Values The software can save the acquired data into an Excel or text file by clicking the Log Data button, which opens the dialog box shown in Figure 7 From this window, you can choose to log the ADC, the Celsius value, or both, as well as set the logging interval (see Figure 7). This section gives you an update of all the temperature limits and the temperature reading of the part. These values are a replica of the ADC values in the Set Temperature Limits section, converted into degrees Celsius. The graph labeled Temperature in Celsius displays the variation in time of the high and low temperature limits as well as the current temperature in degrees Celsius. Register Map This section displays all the register values for the part. You can read or write to any register by using the Read and Write buttons (see Figure 8). Figure 9. Data Logging The Easy Setup button restores all registers with default values. Close This button closes the current window and returns to the selection window (see Figure 3). 09023-008 09023-007 Easy Setup Figure 10. Register Map Rev. B | Page 7 of 16 UG-138 EVAL-ADT7x20EBZ User Guide WIRING GUIDELINES Table 1 is a wiring guide for the ADT7320FBZ and Table 2 is a wiring guide for the ADT7420FBZ. Table 1. ADT7320FBZ Wiring Guide Table 2. ADT7420FBZ Wiring Guide Color Red Black White Blue Green Yellow Color Red Black White Blue Reference Designator VCC Ground SCLK DOUT DIN CS Rev. B | Page 8 of 16 Reference Designator VCC Ground SCL SDA EVAL-ADT7x20EBZ User Guide UG-138 EVALUATION BOARD SCHEMATICS AND ARTWORK D2 09023-009 Figure 11. ADT7x20 Evaluation Board Schematic—Main Board Temperature Sensor Circuit Rev. B | Page 9 of 16 UG-138 EVAL-ADT7x20EBZ User Guide 09023-010 Figure 12. ADT7x20 Evaluation Board Schematic—Main Board USB Controller Circuit Rev. B | Page 10 of 16 EVAL-ADT7x20EBZ User Guide UG-138 ADT7320UCPZ I2C address is set through software ADT7420UCPZ 09023-011 Figure 13. ADT7x20 Evaluation Board Schematic—External Board Circuit Rev. B | Page 11 of 16 EVAL-ADT7x20EBZ User Guide 09023-114 UG-138 09023-115 Figure 14. ADT7420FBZ Flex Board Figure 15. ADT7320FBZ Flex Board Rev. B | Page 12 of 16 UG-138 09023-012 EVAL-ADT7x20EBZ User Guide 09023-013 Figure 16. ADT7x20 Evaluation Board—Main Board Component Side (Layer 1) 09023-014 Figure 17. ADT7x20 Evaluation Board—Main Board Solder Side (Layer 2) 09023-016 09023-015 Figure 18. ADT7x20 Evaluation Board—Main Board Silkscreen Figure 19. ADT7x20 Evaluation Board External Board Component Side (Layer 1) Figure 20. ADT7x20 Evaluation Board External Board Solder Side (Layer 2) Rev. B | Page 13 of 16 EVAL-ADT7x20EBZ User Guide 09023-017 UG-138 Figure 22. ADT7320FBZ Component Side (Layer1) SOLDER SIDE Figure 26. ADT7420FBZ Solder Side(Layer 2) Figure 23. ADT7320FBZ Solder Side (Layer 2) COMPONENT SIDE 09023-024 COMPONENT SIDE SILKSCREEN 09023-026 Figure 25. ADT7420FBZ Component Side(Layer1) 09023-023 SOLDER SIDE 09023-025 COMPONENT SIDE Figure 27. ADT7420FBZ Silkscreen Figure 24. ADT7320FBZ Silkscreen Rev. B | Page 14 of 16 09023-027 COMPONENT SIDE 09023-023 Figure 21. ADT7x20 Evaluation Board External Board Silkscreen EVAL-ADT7x20EBZ User Guide UG-138 ORDERING INFORMATION BILL OF MATERIALS Table 3.Component Listing—Main Board Qty. 2 1 1 14 3 1 1 2 1 1 2 1 1 2 2 3 6 1 1 1 1 1 1 1 Reference Designator C1, C2 C3 C4 C5, C6, C7, C8, C9, C10, C12, C13, C14, C15, C16, C18, C19, C20 C11, C21, C22 C17 D1 D2, D3 J1 J2 Q1, Q2 R1 R2 R3, R6 R4, R5 R7, R11, R13 R8, R9, R10, R12, R14, R15 U1 U2 U3 U4 U5 U6 Y1 Description 50 V NPO SMD ceramic capacitor 10 V SMD tantalum capacitor 10 V SMD tantalum capacitor 16 V X7R multilayer ceramic capacitor Value 22 pF 47 μF 2.2 μF 0.1 μF Supplier/Ordering No. Farnell 722005 Farnell 1432591 Farnell 498646 Farnell 1216538 10 V SMD tantalum capacitor 10 V dc Y5V ceramic capacitor Green LED Red LED USB mini-B connector 10-pin terminal block Low power bipolar transistor SMD resistor SMD resistor SMD resistor SMD resistor SMD resistor SMD resistor Temperature sensor IC Temperature sensor IC 64 kB I2C serial EEPROM Precision low dropout voltage regulator Dual SPDT switch USB microcontroller SMD crystal 10 μF 1 μF VLMP31G2J1 VLMS31J1K2 54819-0579 N/A BC807 0Ω 10 kΩ 100 kΩ 2.2 kΩ 270 Ω 10 kΩ ADT7320UPCZ ADT7420UPCZ 24LC64 ADP3303AR-3.3 ADG787BRMZ CY7C6813-56LFC 24 MHz Farnell 197130 Farnell 3188840 Farnell 1328320 Farnell 1328350 Digi-Key WM17116CT-ND Farnell 9632179 Farnell 1081222 Farnell 772227 Farnell 9330399 Farnell 911471 Farnell 196319 Farnell 9331964 Farnell 911355 Analog Devices ADT7320UPCZ Analog Devices ADT7420UPCZ Digi-Key 24LC64-I/SN-ND Analog Devices ADP3303ARZ-3.3 Analog Devices ADG787BRMZ Embassy CY7C68013-56LFC Farnell 9509658 Table 4. Component Listing—External Board Qty. 2 2 2 4 2 1 1 Reference Designator C1, C3 C2, C4 D1, D2 R1, R2, R4, R5 R3, R6 U1 U2 Description 16 V X7R multilayer ceramic capacitor 10 V SMD tantalum capacitor Green LED SMD resistor SMD resistor Temperature sensor IC Temperature sensor IC Value 0.1 μF 10 μF VLMP31G2J1 10 kΩ 270 Ω ADT7320UPCZ ADT7420UPCZ Supplier/Ordering number Farnell 1216538 Farnell 197130 Farnell 1328320 Farnell 9330399 Farnell 9331964 Analog Devices ADT7320UPCZ Analog Devices ADT7420UPCZ Value 0.1 μF 10 kΩ ADT7320UPCZ Supplier/Ordering number Farnell 1216538 Farnell 9330399 Analog Devices ADT7320UPCZ Value 0.1 μF 10 kΩ ADT7420UPCZ Supplier/Ordering number Farnell 1216538 Farnell 9330399 Analog Devices ADT7420UPCZ Table 3. Component Listing—ADT7320FBZ Flexi Board Qty. 1 2 1 Reference Designator C1 R1, R2 U1 Description 16 V X7R multilayer ceramic capacitor SMD resistor Temperature sensor IC Table 4. Component Listing—ADT7420FBZ Flexi Board Qty. 1 2 1 Reference Designator C1 R1, R2 U1 Description 16 V X7R multilayer ceramic capacitor SMD resistor Temperature sensor IC Rev. B | Page 15 of 16 UG-138 EVAL-ADT7x20EBZ User Guide RELATED LINKS Resource ADT7320 ADT7420 Description Product Page, ±0.25°C Accurate, 16-Bit Digital SPI Temperature Sensor Product Page, ±0.25°C Accurate, 16-Bit Digital I2C Temperature Sensor I2C refers to a communications protocol originally developed by Philips Semiconductors (now NXP Semiconductors). ESD Caution ESD (electrostatic discharge) sensitive device. Charged devices and circuit boards can discharge without detection. Although this product features patented or proprietary protection circuitry, damage may occur on devices subjected to high energy ESD. Therefore, proper ESD precautions should be taken to avoid performance degradation or loss of functionality. Legal Terms and Conditions By using the evaluation board discussed herein (together with any tools, components documentation or support materials, the “Evaluation Board”), you are agreeing to be bound by the terms and conditions set forth below (“Agreement”) unless you have purchased the Evaluation Board, in which case the Analog Devices Standard Terms and Conditions of Sale shall govern. Do not use the Evaluation Board until you have read and agreed to the Agreement. Your use of the Evaluation Board shall signify your acceptance of the Agreement. This Agreement is made by and between you (“Customer”) and Analog Devices, Inc. (“ADI”), with its principal place of business at One Technology Way, Norwood, MA 02062, USA. Subject to the terms and conditions of the Agreement, ADI hereby grants to Customer a free, limited, personal, temporary, non-exclusive, non-sublicensable, non-transferable license to use the Evaluation Board FOR EVALUATION PURPOSES ONLY. Customer understands and agrees that the Evaluation Board is provided for the sole and exclusive purpose referenced above, and agrees not to use the Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “Third Party” includes any entity other than ADI, Customer, their employees, affiliates and in-house consultants. The Evaluation Board is NOT sold to Customer; all rights not expressly granted herein, including ownership of the Evaluation Board, are reserved by ADI. CONFIDENTIALITY. This Agreement and the Evaluation Board shall all be considered the confidential and proprietary information of ADI. Customer may not disclose or transfer any portion of the Evaluation Board to any other party for any reason. Upon discontinuation of use of the Evaluation Board or termination of this Agreement, Customer agrees to promptly return the Evaluation Board to ADI. ADDITIONAL RESTRICTIONS. Customer may not disassemble, decompile or reverse engineer chips on the Evaluation Board. Customer shall inform ADI of any occurred damages or any modifications or alterations it makes to the Evaluation Board, including but not limited to soldering or any other activity that affects the material content of the Evaluation Board. Modifications to the Evaluation Board must comply with applicable law, including but not limited to the RoHS Directive. TERMINATION. ADI may terminate this Agreement at any time upon giving written notice to Customer. Customer agrees to return to ADI the Evaluation Board at that time. LIMITATION OF LIABILITY. THE EVALUATION BOARD PROVIDED HEREUNDER IS PROVIDED “AS IS” AND ADI MAKES NO WARRANTIES OR REPRESENTATIONS OF ANY KIND WITH RESPECT TO IT. ADI SPECIFICALLY DISCLAIMS ANY REPRESENTATIONS, ENDORSEMENTS, GUARANTEES, OR WARRANTIES, EXPRESS OR IMPLIED, RELATED TO THE EVALUATION BOARD INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, TITLE, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS. IN NO EVENT WILL ADI AND ITS LICENSORS BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES RESULTING FROM CUSTOMER’S POSSESSION OR USE OF THE EVALUATION BOARD, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DELAY COSTS, LABOR COSTS OR LOSS OF GOODWILL. ADI’S TOTAL LIABILITY FROM ANY AND ALL CAUSES SHALL BE LIMITED TO THE AMOUNT OF ONE HUNDRED US DOLLARS ($100.00). EXPORT. Customer agrees that it will not directly or indirectly export the Evaluation Board to another country, and that it will comply with all applicable United States federal laws and regulations relating to exports. GOVERNING LAW. This Agreement shall be governed by and construed in accordance with the substantive laws of the Commonwealth of Massachusetts (excluding conflict of law rules). Any legal action regarding this Agreement will be heard in the state or federal courts having jurisdiction in Suffolk County, Massachusetts, and Customer hereby submits to the personal jurisdiction and venue of such courts. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to this Agreement and is expressly disclaimed. ©2012–2014 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG09023-0-10/14(B) Rev. B | Page 16 of 16