HMC197BE
v01.1117
SWITCHES - SPDT - SMT
GaAs MMIC SOT26 SPDT
SWITCH, DC- 3 GHz
Typical Applications
Features
The HMC197BE is ideal for:
Low Insertion Loss: 0.4 dB
• MMDS & WirelessLAN
Ultra Small Package: SOT26
• PCMCIA Wireless Cards
Input IP3: +59 dBm
• Portable Wireless
Positive Control: 0/+3V @ 3 µA
Functional Diagram
General Description
The HMC197BE is a low-cost SPDT switch in a
6-lead SOT26 plastic package for use in general
switching applications which require very low insertion
loss and very small size. The device can control signals from DC to 3 GHz and is especially suited for
900 MHz, 1.8 - 2.2 GHz, and 2.4 GHz ISM applications with less than 1 dB loss. The design provides
exceptional insertion loss performance, ideal for filter
and receiver switching. RF1 and RF2 are reflective
shorts when “Off”. The two control voltages require a
minimal amount of DC current and offer compatibility
with most CMOS & TTL logic families. See HMC221BE
for same performance in an alternate SOT26 pin-out.
Electrical Specifications, TA = +25° C, Vctl = 0/+3 to +8 Vdc, 50 Ohm System
Parameter
Min.
Typ.
Max.
Units
0.4
0.4
0.4
0.5
0.7
0.8
0.9
1.1
dB
dB
dB
dB
Insertion Loss
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
Isolation
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
24
24
18
14
30
34
29
24
dB
dB
dB
dB
Return Loss
DC - 1.0 GHz
DC - 2.0 GHz
DC - 2.5 GHz
DC - 3.0 GHz
20
16
14
10
35
31
28
24
dB
dB
dB
dB
Input Power for 1dB Compression
(Vctl = 0/+5V)
0.5 - 1.0 GHz
0.5 - 3.0 GHz
25
23
30
29
dBm
dBm
Input Third Order Intercept
(Vctl = 0/+5V) (Two-tone Input Power = +10 dBm Each Tone)
0.5 - 1.0 GHz
0.5 - 3.0 GHz
40
38
59
55
dBm
dBm
Switching Characteristics
DC - 3.0 GHz
3
10
ns
ns
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
1
Frequency
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC197BE
v01.1117
GaAs MMIC SOT26 SPDT
SWITCH, DC- 3 GHz
Insertion Loss
Isolation
0
0
-1
-1.5
-2
-20
-30
-40
-2.5
-3
-50
0
0.5
1
1.5
2
2.5
3
0
0.5
1
FREQUENCY (GHz)
+25C
1.5
2
2.5
3
FREQUENCY (GHz)
+85C
-40C
RF1
RF2
Input 0.1 and 1.0 dB
Compression vs. Control Voltage
Return Loss
35
0
P1dB & P0.1dB (dBm)
-10
RETURN LOSS (dB)
SWITCHES - SPDT - SMT
-10
ISOLATION (dB)
INSERTION LOSS (dB)
-0.5
-20
-30
30
25
20
-40
15
-50
0
0.5
1
1.5
2
2.5
3
3
4
5
RFC
RF1,RF2
Input Third Order
Intercept Point vs. Control Voltage
7
8
9
0.1 dB at 900 MHz
0.1 dB at 1900 MHz
1 dB at 900 MHz
1 dB at 1900 MHz
Distortion vs. Control Voltage
Control Input
60
58
900 MHz
1900 MHz
+3
57
53
54
52
Third Order Intercept (dBm) +10 dBm Each Tone
(Vdc)
56
IP3 (dBm)
6
CONTROL INPUT (V)
FREQUENCY (GHz)
+5
59
56
+8
58
55
Truth Table
50
*Control Input Voltage Tolerances are ± 0.2 Vdc.
48
Control Input*
46
44
2
3
4
5
6
7
8
CONTROL INPUT (V)
900 MHz
1900 MHz
9
Control Current
Signal Path State
A
(Vdc)
B
(Vdc)
Ia
(µA)
Ib
(µA)
RF to
RF1
RF to
RF2
0
+3
-0.5
0.5
ON
OFF
+3
0
0.5
-0.5
OFF
ON
0
+5
-1.1
1.1
ON
OFF
+5
0
1.1
-1.1
OFF
ON
0
+8
-8
8
ON
OFF
+8
0
8
-8
OFF
ON
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
2
HMC197BE
v01.1117
GaAs MMIC SOT26 SPDT
SWITCH, DC- 3 GHz
Absolute Maximum Ratings
Compression vs. Control Voltage
SWITCHES - SPDT - SMT
Carrier at 900 MHz
Control
Input
(Vdc)
Input Power
for 0.1 dB
Compression
Carrier at 1900 MHz
Input Power
for 1.0 dB
Compression
(dBm)
(dBm)
Input Power
for 0.1 dB
Compression
Input Power
for 1.0 dB
Compression
(dBm)
(dBm)
+3
21
24
21
24
+5
28
30
27
30
+8
32
34
32
34
Control Voltage Range (A & B)
-0.2 to +12 Vdc
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Caution: Do not operate in 1dB compression at power levels above
+31 dBm (Vctl = +5 Vdc) and do not “hot switch” power levels
greater than +20 dBm (Vctl = +5Vdc). DC blocks are required at
ports RFC, RF1 and RF2.
6-Lead Small Outline Transistor Package [SOT-23]
(RJ-6)
Dimensions shown in millimeters
Outline Drawing
3.00
2.90
2.80
1.70
1.60
1.50
6
5
4
1
2
3
PIN 1
INDICATOR
3.00
2.80
2.60
0.95 BSC
1.90
BSC
0.15 MAX
0.05 MIN
1.45 MAX
0.95 MIN
0.50 MAX
0.30 MIN
0.20 MAX
0.08 MIN
SEATING
PLANE
10°
4°
0°
0.55
0.45
0.35
0.60
BSC
12-16-2008-A
1.30
1.15
0.90
COMPLIANT TO JEDEC STANDARDS MO-178-AB
6-Lead Small Outline Transistor Package [SOT-23]
(RJ-6)
Dimensions shown in millimeters.
Package Information
Part Number
Package Body Material
Lead Finish
HMC197BE
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[1]
Package Marking [3]
197BE
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
3
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
HMC197BE
v01.1117
GaAs MMIC SOT26 SPDT
SWITCH, DC- 3 GHz
Typical Application Circuit
SWITCHES - SPDT - SMT
Notes:
1. Set logic gate and switch Vdd = +3V to +5V and use HCT series
logic to provide a TTL driver interface.
2. Control inputs A/B can be driven directly with CMOS logic (HC)
with Vdd of 5 to 8 Volts applied to the CMOS logic gates.
3. DC Blocking capacitors are required for each RF port as shown.
Capacitor value determines lowest frequency of operation.
4. Highest RF signal power capability is achieved with Vdd = +8V
and A/B set to 0/+8V.
Evaluation Circuit Board
R2
List of Materials for Evaluation PCB EVAL01-HMC197BE[1]
Item
Description
J1 - J3
PCB Mount SMA RF Connector
J6 - J8
DC Pin
C1 - C3
330 pF Capacitor, 0603 Pkg.
R1, R2
1 kOhm Resistor, 0402 Pkg.
U1
HMC197BE SPDT Switch
PCB [2]
600-00703-00 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50
Ohm impedance and the package ground leads and
package bottom should be connected directly to the
ground plane similar to that shown above. The evaluation circuit board shown above is available from
Analog Devices Inc. upon request.
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
4