EVAL01-HMC6505LC5

HMC6505LC5 v02.0413 Typical Applications Features The HMC6505LC5 is ideal for: High Conversion Gain: 15 dB • Point-to-Point and Point-to-Multi-Point Radio Sideband Rejection: 22 dBc • Military Radar, EW & ELINT LO / RF Rejection: 14 dBc • Satellite Communications High Output IP3: +35 dBm • Sensors 32 Lead 5x5 mm SMT Ceramic Package: 25 mm² Functional Diagram General Description B SO LE TE The HMC6505LC5 is a compact GaAs MMIC I/Q upconverter in a leadless RoHS compliant SMT package. This device provides a small signal conversion gain of 15 dB with 22 dBc of sideband rejection. The HMC6505LC5 utilizes a RF amplifier preceded by an I/Q mixer where the LO is driven by a driver amplifier. IF1 and IF2 mixer inputs are provided and an external 90° hybrid is needed to select the required sideband. The I/Q mixer topology reduces the need for filtering of the unwanted sideband. The HMC6505LC5 is a much smaller alternative to hybrid style single sideband upconverter assemblies and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. Electrical Specifications, TA = +25°C, IF = 350 MHz, LO = +4 dBm, Vdd2, 3 = +5V, Idd2 + Idd3 = 120 mA, Vdd1 = +5V, Idd1 = 125 mA [1][2][6] Parameter Min. Frequency Range, RF Typ. Max. Min. Typ. Max. Units GHz 5.5 - 7 7 - 8.6 Frequency Range, LO 5 - 10 6.5 - 11.6 GHz Frequency Range, IF DC - 3 DC - 3 GHz Conversion Gain [5] 12 15 11 14 dB 18 22 18 22 dBc 22 dBm IP3 (Output) 31 35 31 35 dBm LO / RF Rejection [3] [4] 7 10 11 14 dBc O mixers - i/q mixers, IRMs & Receivers - SMT GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Sideband Rejection 1 dB Compression (Output) 21 RF Return Loss 16 17 dB LO Return Loss 8 9 dB IF1 Return Loss 10 10 dB IF2 Return Loss 8 8 dB Supply Current Idd1 125 125 mA Supply Current Idd2 + Idd3 [2] 120 120 mA [1] Unless otherwise noted all measurements performed with high side LO, IF = 350 MHz and external IF 90° hybrid. [2] Adjust Vgg between -2 to 0V to achieve Idd2 + Idd3 = 120 mA Typical. [3] The LO / RF Rejection is defined as the LO signal level at the RF output port relative to the desired RF output signal level. [4] The LO / RF Rejection data is with IF = -6 dBm. [5] Data based on subtracting out board loss and loss of hybrid. [6] +3V can also be used for Vdd1. 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Electrical Specifications, (continued) [1] Min. Typ. Max. Min. Typ. Max. Units 5.5 - 7 7 - 8.6 Frequency Range, LO 5 - 10 6.5 - 11.6 GHz Frequency Range, IF DC - 3 DC - 3 GHz 18 V Control -4 LO Power -2 20 3 Gain Flatness (150 MHz Segments) 18 0 -4 10 -2 0.5 Noise Figure (Min Attenuation) [7] 11.5 20 dB 3 0 V 10 dBm 0.5 dB TE Dynamic Range GHz 12 dB [1] Unless otherwise noted all measurements performed with high side LO, IF = 350 MHz and external IF 90° hybrid. [7] Noise Figure measurement performed with high side LO, IF = 2500 MHz and external IF 90° hybrid. LE Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 350 MHz Conversion Gain, LSB vs. Temperature [8] 16 12 +25 C +85 C -40 C 8 4 0 5.5 6 6.5 7 7.5 8 8.5 CONVERSION GAIN (dB) 20 B SO CONVERSION GAIN (dB) 20 Conversion Gain, LSB vs. LO Drive [8] 16 12 2 dBm 3 dBm 4 dBm 5 dBm 6 dBm 8 4 0 9 5.5 6 6.5 RF FREQUENCY (GHz) 0 8.5 9 +25 C +85 C -40 C -5 RETURN LOSS (dB) RETURN LOSS (dB) 8 0 -5 -10 -15 -20 -10 -15 -20 +25 C +85 C -40 C -25 7.5 LO Return Loss vs. Temperature O RF Return Loss vs. Temperature 7 RF FREQUENCY (GHz) mixers - i/q mixers, IRMs & Receivers - SMT Parameter Frequency Range, RF -30 -25 5 6 7 8 RF FREQUENCY (GHz) 9 5 6 7 8 9 FREQUENCY (GHz) [8] Board loss and Hybrid loss not subtracted out. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 2 HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 350 MHz Sideband Rejection vs. Temperature IF Return Loss [9] SIDE BAND REJECTION (dBc) 40 -10 -15 IF1 IF2 -25 -30 +25 C +85 C -40 C 30 25 20 15 10 5 0 0 1 2 3 4 5.5 FREQUENCY (GHz) 6 6.5 7 7.5 8 8.5 9 16 LE RF FREQUENCY (GHz) Input P1dB, LSB vs. Temperature Output P1dB, LSB vs. Temperature 26 14 +25 C +85 C -40 C 12 24 10 8 6 4 2 0 5.5 B SO P1dB (dBm) 35 TE -20 6 6.5 7 7.5 8 8.5 P1dB (dBm) RETURN LOSS (dB) -5 22 20 +25 C +85 C -40 C 18 16 14 9 5.5 6 RF FREQUENCY (GHz) 7 7.5 8 8.5 9 8.5 9 Output IP3, LSB vs. Temperature 45 25 40 IP3 (dBm) 30 20 15 +25 C +85 C -40 C 10 6.5 RF FREQUENCY (GHz) O Input IP3, LSB vs. Temperature IP3 (dBm) mixers - i/q mixers, IRMs & Receivers - SMT 0 +25 C +85 C -40 C 35 30 25 5 20 5.5 6 6.5 7 7.5 8 RF FREQUENCY (GHz) 8.5 9 5.5 6 6.5 7 7.5 8 RF FREQUENCY (GHz) [9] Data taken without external IF 90° hybrid 3 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 350 MHz Conversion Gain, LSB vs. Control Voltage [8] Input IP3, LSB vs. Control Voltage 20 27 5 0 -5 21 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz 18 -10 -15 15 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 -4 VCTRL (V) -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 LE VCTRL (V) LO/RF Rejection, LSB Isolation 25 0 +25 C +85 C -40 C 20 15 10 5 0 5.5 -5 B SO LO/RF REJECTION (dBc) 24 TE IP3 (dBm) 10 6 6.5 7 7.5 8 8.5 -10 -15 LO/IF1 LO/IF2 -20 5 6 7 8 9 FREQUENCY (GHz) O FREQUENCY (GHz) 9 ISOLATION (dB) CONVERSION GAIN (dB) 15 mixers - i/q mixers, IRMs & Receivers - SMT 30 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz [8] Board loss and Hybrid loss not subtracted out. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 4 HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 2500 MHz Conversion Gain, LSB vs. Temperature [8] Conversion Gain, LSB vs. LO Drive [8] CONVERSION GAIN (dB) +25 C +85 C -40 C 16 12 2 dBm 3 dBm 4 dBm 5 dBm 6 dBm 16 12 8 TE 8 4 4 0 5.5 6 6.5 7 7.5 8 8.5 9 5.5 6 6.5 Sideband Rejection vs. Temperature 40 7.5 8 8.5 9 Input P1dB, LSB vs. Temperature 16 14 35 +25 C +85 C -40 C 25 20 15 5.5 6 6.5 7 7.5 8 +25 C +85 C -40 C 12 B SO 30 10 8.5 10 8 6 4 2 0 9 5.5 6 6.5 RF FREQUENCY (GHz) 7 7.5 8 8.5 9 8.5 9 RF FREQUENCY (GHz) Input IP3, LSB vs. Temperature O Output P1dB, LSB vs. Temperature 26 35 24 +25 C +85 C -40 C 30 22 IP3 (dBm) P1dB (dBm) 7 RF FREQUENCY (GHz) LE RF FREQUENCY (GHz) P1dB (dBm) CONVERSION GAIN (dB) 20 0 SIDE BAND REJECTION (dBc) mixers - i/q mixers, IRMs & Receivers - SMT 20 20 +25 C +85 C -40 C 18 25 20 15 16 14 10 5.5 6 6.5 7 7.5 8 8.5 RF FREQUENCY (GHz) 9 5.5 6 6.5 7 7.5 8 RF FREQUENCY (GHz) [8] Board loss and Hybrid loss not subtracted out. 5 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 2500 MHz Conversion Gain, LSB vs. Control Voltage [8] Output IP3, LSB vs. Temperature 35 30 25 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz 10 5 0 TE IP3 (dBm) 40 CONVERSION GAIN (dB) +25 C +85 C -40 C -5 -10 -15 20 5.5 6 6.5 7 7.5 8 8.5 9 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 VCTRL (V) LE RF FREQUENCY (GHz) Noise Figure, LSB vs. Temperature Minimum Attenuation Input IP3, LSB vs. Control Voltage 30 16 18 B SO IP3 (dBm) 22 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz 14 10 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 12 10 8 +25 C +85 C -40 C 6 4 2 0 5.5 6 6.5 7 7.5 8 8.5 9 FREQUENCY (GHz) O VCTRL (V) 0 NOISE FIGURE (dB) 14 26 mixers - i/q mixers, IRMs & Receivers - SMT 15 45 [8] Board loss and Hybrid loss not subtracted out. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 6 HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 350 MHz Conversion Gain, USB vs. Temperature [8] Conversion Gain, USB vs. LO Drive [8] CONVERSION GAIN (dB) +25 C +85 C -40 C 16 12 2 dBm 3 dBm 4 dBm 5 dBm 6 dBm 16 12 8 TE 8 4 4 0 5.5 6 6.5 7 7.5 8 8.5 9 5.5 6 6.5 Sideband Rejection vs. Temperature 30 7.5 8 8.5 9 Input P1dB, USB vs. Temperature 16 14 25 +25 C +85 C -40 C 15 10 5 5.5 6 6.5 7 7.5 8 +25 C +85 C -40 C 12 B SO 20 0 8.5 10 8 6 4 2 0 9 5.5 6 6.5 RF FREQUENCY (GHz) 7 7.5 8 8.5 9 8.5 9 RF FREQUENCY (GHz) Input IP3, USB vs. Temperature O Output P1dB, USB vs. Temperature 26 35 24 30 22 IP3 (dBm) P1dB (dBm) 7 RF FREQUENCY (GHz) LE RF FREQUENCY (GHz) P1dB (dBm) CONVERSION GAIN (dB) 20 0 SIDE BAND REJECTION (dBc) mixers - i/q mixers, IRMs & Receivers - SMT 20 20 +25 C +85 C -40 C 18 25 20 +25 C +85 C -40 C 15 16 14 10 5.5 6 6.5 7 7.5 8 8.5 RF FREQUENCY (GHz) 9 5.5 6 6.5 7 7.5 8 RF FREQUENCY (GHz) [8] Board loss and Hybrid loss not subtracted out. 7 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 350 MHz Conversion Gain, USB vs. Control Voltage [8] Output IP3, USB vs. Temperature 15 CONVERSION GAIN (dB) 35 +25 C +85 C -40 C 25 5 0 -5 -10 20 -15 5.5 6 6.5 7 7.5 8 8.5 9 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 8.5 9 VCTRL (V) LE RF FREQUENCY (GHz) Input IP3, USB vs. Control Voltage 40 LO/RF Rejection, USB 25 35 25 20 B SO 30 IP3 (dBm) 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz 10 TE 30 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz 15 10 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 +25 C +85 C -40 C 20 15 10 5 0 5.5 6 6.5 7 7.5 8 FREQUENCY (GHz) O VCTRL (V) 0 LO/RF REJECTION (dBc) IP3 (dBm) 40 mixers - i/q mixers, IRMs & Receivers - SMT 45 [8] Board loss and Hybrid loss not subtracted out. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 8 HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 2500 MHz Conversion Gain, USB vs. Temperature [8] Conversion Gain, USB vs. LO Drive [8] CONVERSION GAIN (dB) 16 12 2 dBm 3 dBm 4 dBm 5 dBm 6 dBm 16 12 8 TE 8 4 4 0 5.5 6 6.5 7 7.5 8 8.5 9 5.5 6 6.5 Sideband Rejection vs. Temperature 80 7.5 8 8.5 9 Input P1dB, USB vs. Temperature 16 +25 C +85 C -40 C 14 +25 C +85 C -40 C 60 50 40 5.5 12 B SO 70 30 6 6.5 7 7.5 8 8.5 10 8 6 4 2 0 9 5.5 6 6.5 RF FREQUENCY (GHz) 26 24 7 7.5 8 8.5 9 8.5 9 RF FREQUENCY (GHz) Input IP3, USB vs. Temperature O Output P1dB, USB vs. Temperature 35 30 +25 C +85 C -40 C +25 C +85 C -40 C 25 22 IP3 (dBm) P1dB (dBm) 7 RF FREQUENCY (GHz) LE RF FREQUENCY (GHz) P1dB (dBm) CONVERSION GAIN (dB) 20 +25 C +85 C -40 C 0 SIDE BAND REJECTION (dBc) mixers - i/q mixers, IRMs & Receivers - SMT 20 20 20 15 18 10 16 5 14 0 5.5 6 6.5 7 7.5 8 8.5 RF FREQUENCY (GHz) 9 5.5 6 6.5 7 7.5 8 RF FREQUENCY (GHz) [8] Board loss and Hybrid loss not subtracted out. 9 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Data Taken as SSB Upconverter with External IF 90° Hybrid, IF = 2500 MHz Conversion Gain, USB vs. Control Voltage [8] Output IP3, USB vs. Temperature 12 8 4 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz 10 0 -10 TE 16 -20 -30 0 -40 5.5 6 6.5 7 7.5 8 8.5 9 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 VCTRL (V) LE RF FREQUENCY (GHz) Input IP3, USB vs. Control Voltage 30 5.5 GHz 6.5 GHz 7.5 GHz 8.5 GHz 25 IP3 (dBm) B SO 20 15 10 5 0 -4 -3.5 -3 -2.5 -2 -1.5 -1 -0.5 0 O VCTRL (V) mixers - i/q mixers, IRMs & Receivers - SMT 20 +25 C +85 C -40 C CONVERSION GAIN (dB) CONVERSION GAIN (dB) 20 [8] Board loss and Hybrid loss not subtracted out. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 10 HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz MxN Spurious Outputs [1][2] MxN Spurious Outputs [1][3] 11 nLO mIF 0 1 2 3 4 mIF 0 1 2 3 4 0 x 17.3 35.1 57.5 62.6 0 x 17.3 35.1 56.5 62.7 +1 80.6 0 39.6 66.4 93.3 -1 80.6 0 42.8 62.9 93 +2 49.9 64.3 40.6 72.3 91.5 -2 49.9 53.3 39.3 72.9 90.3 96.7 57.8 87.4 78.5 89.8 -3 96.9 56 90 75 93 88.5 100.8 89.3 94.2 91.7 -4 88.2 101.9 89.4 96.1 91.1 TE +3 +4 IF = 0.35 GHz @ -6 dBm IF = 0.35 GHz @ -6 dBm LO = 8.5 GHz @ 0 dBm LO = 8.5 GHz @ 0 dBm nLO nLO 0 1 2 3 4 0 x 15.1 36.4 50.4 61.5 +1 66.7 0 42.9 56.5 +2 49.2 47.1 39.9 76.5 +3 95.2 58.9 79.4 76 +4 86.9 102.5 86.5 96.8 IF = 0.35 GHz @ -6 dBm mIF 0 1 2 3 4 0 x 15 36.4 50.6 60.1 LE mIF 83.2 -1 66.6 0 48.2 51.4 82.8 84.6 -2 49.2 47 38.1 79.7 79.9 94.2 -3 95.9 56.7 86.7 75.4 93.1 -4 86.9 94 88.3 97.4 93.8 96.1 IF = 0.35 GHz @ -6 dBm LO = 7.7 GHz @ 0 dBm B SO LO = 7.7 GHz @ 0 dBm nLO mIF 0 +1 +2 +3 +4 nLO 0 1 2 3 4 mIF 0 1 2 3 4 x 11.6 23.6 38.4 60.1 0 x 11.6 23.5 38.3 58.7 59.8 0 42.9 45.4 70.9 -1 59.7 0 46.7 36.9 73.4 48.5 50.4 39.4 79.9 76.7 -2 48.6 53 37.7 75.2 69.1 86.9 61 87.5 76.2 94.3 -3 87 58 75 70.9 91.1 85.2 82.4 86.2 97 95.7 -4 84.8 87 83.6 99.5 93.1 IF = 0.35 GHz @ -6 dBm IF = 0.35 GHz @ -6 dBm LO = 7.0 GHz @ 0 dBm LO = 7.0 GHz @ 0 dBm O mixers - i/q mixers, IRMs & Receivers - SMT nLO [1] Data taken without external IF 90° hybrid [2] All values in dBc below RF power level (LO + IF) USB [3] All values in dBc below RF power level (LO - IF) LSB For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Absolute Maximum Ratings LO Input +10 dBm Vctrl -5V to +0.3V Vdd1 +5.5V Vdd2 and Vdd3 +5.5V Vgg -3V to 0V Channel Temperature 175 °C Continuous Pdiss (T = 85°C) (derate 18.3 mW/°C above 85°C) 1.65 W Thermal Resistance (channel to ground paddle) 54.6 °C/W -65 to +150 °C Operating Temperature -40 to +85 °C ESD Sensitivity (HBM) Class1A LE Storage Temperature O B SO Outline Drawing NOTES: 1.. PACKAGE BODY MATERIAL: ALUMINA 2.. LEAD AND GROUND PADDLE PLATING: 30 - 80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKLE 3.. DIMENSIONS ARE IN INCHES [MILLIMETERS] 4.. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5.. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM 6.. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND mixers - i/q mixers, IRMs & Receivers - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS +20 dBm TE IF Input Package Information Part Number Package Body Material Lead Finish HMC6505LC5 Alumina, White Gold over Nickel MSL Rating MSL3 [1] Package Marking [2] 6505 XXXX [1] Max peak reflow temperature of 260 °C [2] 4-Digit lot number XXXX For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com 12 HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz Pin Descriptions Interface Schematic N/C 5 Vdd1 Power supply voltage for LO amplifier. See application circuit for required external components. 7 LOIN This pin is AC coupled and matched to 50 Ohms. 8, 13, 15, 27, 29, 31 GND These pins and package bottom must be connected to RF/DC ground. 12 Vgg Gate control for RF amplifier, please follow “MMIC Amplifier Biasing Procedure” application note. See application circuit for required external components. B SO LE TE Description No connection required. The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. 14 RFOUT This pin is AC coupled and matched to 50 Ohms. 18, 23 Vdd3, Vdd2 Power supply voltage for RF amplifier. See application circuit for required external components. 26 Vctrl Gain Control Voltage for RF Amplifier O mixers - i/q mixers, IRMs & Receivers - SMT Pin Number 13 Function 1 - 4, 6, 9 - 11, 16, 17, 19, 20, 21, 22, 24, 25, 32 28 IF1 30 IF2 Differential IF input pins. For applications not requiring operation to DC, an off chip DC blocking capacitor should be used. For operation to DC this pin must not source/sink more than 3mA of current or part non function and possible part failure will result. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz 100 pF Capacitor, 0402 Pkg. C5, C7, C8, C14, C17 1000 pF Capacitor, 0603 Pkg. C9, C11, C12, C15, C18 2.2 µF Capacitor, Case A Pkg. O C1, C3, C4, C13, C16 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com mixers - i/q mixers, IRMs & Receivers - SMT B SO LE TE Typical Application 14 HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz TE LE B SO O mixers - i/q mixers, IRMs & Receivers - SMT Evaluation PCB List of Materials for Evaluation PCB Eval01-HMC6505LC5 [1] Item Description J1, J2 SMA Connector J3, J4 K-Connector SRI J5, J6, J8, J9 DC Pins C1, C3, C4, C13, C16 100 pF Capacitor, 0402 Pkg. C5, C7, C8, C14, C17 1000 pF Capacitor, 0603 Pkg. C9, C11, C12, C15, C18 2.2 µF Capacitor, Case A U1 HMC6505LC5 Upconverter PCB [2] 125487 Evaluation Board The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR, FR4 or Rogers 4350 15 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com HMC6505LC5 v02.0413 GaAs MMIC I/Q UPCONVERTER 5.5 - 8.6 GHz For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or apps@hittite.com mixers - i/q mixers, IRMs & Receivers - SMT O B SO LE TE Notes: 16