HMC865LC3
v01.0614
Limiting Amplifiers - SMT
32 Gbps LIMITING AMPLIFIER
Typical Applications
Features
The HMC865LC3 is ideal for:
Supports Data Rates up to 43 Gbps.
•• 100 Gbps Ethernet
Low Power Dissipation: 300 mW @ Vcc = +3.3V
•• 100 Gbps Long Haul
Differential Small Signal Gain: 30 dB
•• 40 Gbps (D)QPSK Receivers
High Input Sensitivity: 10 mVp-p Differential
•• Broadband Gain Block for Test & Measurement
Equipment
3-dB Bandwidth: 26.5 GHz
Adjustable Output Voltage
Swing up to 800 mVp-p Differential
16 Lead 3x3mm SMT package: 9mm2
Functional Diagram
General Description
The HMC865LC3 is a Limiting Amplifier packaged in
a leadless 3x3 mm ceramic surface mount package
which supports up to 43 Gbps operation. The amplifier
provides 30 dB of differential gain. Output voltage
swing is adjustable up to 800 mVp-p differential by
using the VAC analog control input. Additive rms jitter
is less than 300 fs for 32 Gbps operation. HMC865LC3
has an internal DC offset correction circuit which
provides differential 10 mVpp input sensitivity.
All input/output RF signals of the HMC865LC3 are
terminated with 50 Ohms to +3.3V on chip and may
be either AC or DC coupled. The outputs of the
device can be operated either differentially or singleended. Outputs can be connected directly to 50 Ohm
terminated system referenced to 3.3V, while DC
blocking capacitors may be used if the terminating
system is 50 Ohms to a non 3.3V level.
Electrical Specifications, TA = +25 °C, Vcc = +3.3V, Vee = 0V, Icc = 90mA
Parameter
Conditions
Differential Small Signal Gain
VAC = 1.6V
Data Rate
Min.
Typ.
Max.
30
dB
32
Small Signal Bandwidth
3-dB cutoff
Gbps
26.5
Input Return Loss
Up to 26.5 GHz
10
Output Return Loss
Up to 26.5 GHz
10
Units
GHz
dB
dB
Input Sensitivity
Differential
10
mVp-p
Maximum Input Swing
Differential
1,000
mVp-p
Differential Output Swing
Rise Time [1]
Adjustable by using VAC
20% - 80% @ 32 Gbps
250
800
13
mVp-p
ps
[1] Vin = Differential 50 mVp-p, fin = 32 Gbps PRBS 223-1 pattern
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
Electrical Specifications (Continued)
Conditions
Min.
Typ.
20% - 80% @ 32 Gbps
Additive Random Jitter
[2]
Max.
13
ps
Vin = 50 mVp-p (Differential)
300
@ 15 GHz
@ 25 GHz
Input referred voltage noise
31
32
VAC
1.6
@ 16 GHz
-6
Power Supply Voltage
3.13
Supply Current
-40
Low Frequency Cut-Off
3.47
90
Operating Temperature
V
mA
25
100 nF off chip capacitor is used
V
dBm
3.3
VAC = 1.6V
fs
nV/rtHz
nV/rtHz
1
Output P1dB
Units
85
10
°C
kHz
[1] Vin = Differential 50 mVp-p, fin = 32 Gbps PRBS 223-1 pattern
[2] Random jitter is measured with 32 Gbps 10101… pattern
Differential Gain & Return Loss vs.
Frequency [1][2]
Differential Output vs. Supply Voltage [1]
1000
DIFFERENTIAL VOLTAGE (mVp-p)
40
30
RESPONSE (dB)
20
10
S21
S11
S22
0
-10
-20
-30
-40
0
5
10
15
20
25
30
35
800
+25C
+85C
-40C
600
400
3.13
40
FREQUENCY (GHz)
3.19
3.24
3.3
3.36
3.41
3.47
SUPPLY VOLTAGE Vcc (V)
Differential Output vs. Control Voltage [2]
Differential Output vs. Vinput &
Temperature @ 16 GHz [1][2]
1000
1000
DIFFERENTIAL VOLTAGE (mVp-p)
DIFFERENTIAL VOLTAGE (mVp-p)
Limiting Amplifiers - SMT
Parameter
Fall Time [1]
800
600
400
+25C
+85C
-40C
200
0
100
+25C
+85C
-40C
10
1
1.1
1.2
1.3
1.4
CONTROL VOLTAGE VAC (V)
[1] VAC = 1.6V
1.5
1.6
1
10
100
1000
SINGLE-ENDED Vin (mVp-p)
[2] Vcc = 3.3V
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
Differential Output vs. Vinput & Supply
Voltage @ 16 GHz [1]
Differential Output vs. Vinput &
Frequency [1] [2]
DIFFERENTIAL VOLTAGE (mVp-p)
DIFFERENTIAL VOLTAGE (mVp-p)
Vcc = 3.30V
Vcc = 3.13V
Vcc = 3.47V
100
1000
2 GHz
10 GHz
16 GHz
20 GHz
100
10
10
1
10
100
1
1000
10
Peak to Peak Jitter vs. Supply Voltage [1][3]
RISE TIME, FALL TIME 20%-80% (ps)
16
7
6
5
4
3
3.19
3.24
3.3
3.36
3.41
12
Rise Time
Fall Time
8
4
3.13
3.47
3.19
3.24
SUPPLY VOLTAGE Vcc (V)
150
125
125
DC CURRENT (mA)
DC CURRENT (mA)
3.36
3.41
3.47
DC Current vs. Control Voltage [2][3]
150
100
75
+25C
+85C
-40C
50
3.3
SUPPLY VOLTAGE Vcc (V)
DC Current vs. Supply Voltage [1][3]
25
0
3.13
1000
Rise & Fall Time vs. Supply Voltage [1][3]
8
2
3.13
100
SINGLE-ENDED Vin (mVp-p)
SINGLE-ENDED Vin (mVp-p)
P-P JITTER (ps)
Limiting Amplifiers - SMT
1000
100
75
+25C
+85C
-40C
50
25
0
3.19
3.24
3.3
3.36
SUPPLY VOLTAGE Vcc (V)
3.41
3.47
1
1.1
1.2
1.3
1.4
1.5
1.6
CONTROL VOLTAGE VAC (V)
[1] VAC = 1.6V [2] Vcc = 3.3V [3] Input Data: Differential 50 mVp-p 32 Gbps NRZ PRBS 223 -1 pattern
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
32 Gbps Single-Ended Output Eye Diagram
Current
Minimum
Maximum
Total
Meas
Eye Amp
362 mV
361 mV
362 mV
Jitter p-p
4.978 ps
4.822 ps
5.444 ps
63
63
Rise Time
13.84 ps
13.84 ps
14.00 ps
63
Fall Time
13.22 ps
11.20 ps
13.53 ps
63
Time Scale: 7 ps/div
Amplitude Scale:100 mV/div
Test Conditions:
VAC = 1.6V, Vcc = 3.3V
Input Data: Differential 50 mVp-p 32 Gbps NRZ PRBS
223-1 pattern
22.5 Gbps Single-Ended Output Eye Diagram
Measurements
Current
Minimum
Maximum
Total
Meas
Eye Amp
388 mV
387 mV
388 mV
Jitter p-p
8.000 ps
5.778 ps
8.000 ps
83
83
Rise Time
14.22 ps
13.78 ps
14.67 ps
83
Fall Time
13.78 ps
13.33 ps
13.78 ps
83
Limiting Amplifiers - SMT
Measurements
Time Scale: 20 ps/div
Amplitude Scale: 81.6 mV/div
Test Conditions:
VAC = 1.6V, Vcc = 3.3V
Input Data: Differential 50 mVp-p 22.5 Gbps NRZ PRBS
223-1 pattern
40 Gbps Single-Ended Output Eye Diagram
Measurements
Current
Minimum
Maximum
Total
Meas
Eye Amp
352 mV
352 mV
352 mV
60
Jitter p-p
5.333 ps
4.444 ps
5.333 ps
60
Rise Time
11.78 ps
11.33 ps
12.00 ps
60
Fall Time
12.00 ps
11.56 ps
12.00 ps
60
Time Scale: 10 ps/div
Amplitude Scale: 80.1 mV/div
Test Conditions:
VAC = 1.6V, Vcc = 3.3V
Input Data: Differential 80 mVp-p 40 Gbps NRZ PRBS
223-1 pattern
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
Limiting Amplifiers - SMT
32 Gbps Input & Output Eye Diagrams
Input Signal
Output Signal
Current
Minimum
Maximum
Total
Meas
Current
Minimum
Maximum
Total
Meas
Eye Amp
9.27 mV
9.25 mV
9.27 mV
36
Eye Amp
219 mV
219 mV
220 mV
Jitter p-p
10.733 ps
7.933 ps
10.733 ps
51
Jitter p-p
5.444 ps
4.822 ps
5.444 ps
55
Rise Time
8.56 ps
8.24 ps
40.13 ps
51
Rise Time
11.93 ps
14.78 ps
15.40 ps
55
Fall Time
10.11 ps
4.04 ps
10.27 ps
51
Fall Time
14.78 ps
14.78 ps
15.40 ps
55
Time Scale: 7 ps/div
Amplitude Scale: 2.8 mV/div
Time Scale: 7 ps/div
Amplitude Scale: 60 mV/div
Test Conditions:
Test Conditions:
VAC = 1.6V, Vcc = 3.3V
VAC = 1.6V, Vcc = 3.3V
55
Absolute Maximum Ratings
5
Power Supply Voltage (Vcc)
-0.5V to +3.6V
Input Voltage
(Vcc -1.3V) to
(Vcc +0.5)
Output Voltage
(Vcc -1V) to
(Vcc +0.5)
Output Amplitude Control Voltage (VAC)
-0.5V to +2.5V
Junction Temperature
125 °C
Continuous Pdiss (T = 85°C)
(Derate 13.10 mW/°C above 85°C)
0.52W
Thermal Resistance (Rth)
(junction to ground paddle)
76.32 °C/W
Storage Temperature
-65 to 125 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD
OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. CHARACTERS TO BE BLACK INK MARKED WITH .018"MIN TO
.030"MAX HEIGHT REQUIREMENTS. UTILIZE MAXIMUM CHARACTER
HEIGHT BASED ON LID DIMENSIONS AND BEST FIT. LOCATE APPROX.
AS SHOWN.
6. PACKAGE WARP SHALL NOT EXCEED 0.05MM DATUM -C7. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
8. PART NUMBER MARKING CONFIGURATION:
HXXX FOR 3 DIGIT HMC #'S (IE. H123)
XXXX FOR 4 DIGIT HMC #'S (IE. 1234)
Limiting Amplifiers - SMT
Outline Drawing
Package Information
Part Number
Package Body Material
Lead Finish
HMC865LC3
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H865
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
Limiting Amplifiers - SMT
Pin Descriptions
7
Pin Number
Function
Description
1, 4, 9, 12
GND
Signal grounds should be connected to 0V.
2, 3
INP, INN
Data Inputs
6, 7
Vee
Supply grounds should be connected to 0V.
8
VAC
Output amplitude control voltage
10, 11
QN, QP
Data outputs.
13, 14
CN, CP
Filter capacitor for offset correction. Connect 100nF
capacitor between CP and CN
15, 16
Vcc
Positive Supply
Ground Paddle
GND
Ground paddle must be connected to DC ground.
Interface Schematic
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
Limiting Amplifiers - SMT
Evaluation PCB
List of Materials for Evaluation PCB EVAL01-HMC865LC3[1]
Item
Description
J1 -J3, J8
DC Pin
J9 - J12
K-type Connector
C1, C11
0.1 µF Capacitor, 0603 Pkg.
C2, C12
1000 pF Capacitor, 0603 Pkg.
C15
0.1 µF Capacitor, 0402 Pkg.
C16, C18
4.7 µF Capacitor, Tantalum
R3, R5, R8
0 Ohm Resistor, 0402 Pkg.
R7
0 Ohm Resistor, 0603 Pkg.
U1
HMC865LC3 Limiting Amplifier
PCB [2]
126150 Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Arlon 25FR or Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
Limiting Amplifiers - SMT
Application Circuit
9
Component
Value
C2, C12
1 nF
C1, C11, C15
0.1 µF
C16, C18
4.7 µF
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC865LC3
v01.0614
32 Gbps LIMITING AMPLIFIER
Application Information
The HMC865LC3 features output swing level adjustment by using VAC pin. Output swing can be adjusted to the
desired level by applying a DC voltage to VAC pin. Differential output swing vs. control voltage relationship is given in
the plot below.
Differential Output vs. Control Voltage
DIFFERENTIAL VOLTAGE (mV)
1000
+25C
+85C
-40C
800
600
400
200
0
1
1.1
1.2
1.3
1.4
1.5
1.6
CONTROL VOLTAGE VAC (V)
In order to adjust the DC voltage on VAC pin a resistor, Rc, should be connected between VAC pin and VCC as shown
in the figure below.
Limiting Amplifiers - SMT
Setting the output swing using external resistor Rc
The value of the resistor can be chosen using the following equation as a function of VAC. VAC DC voltage value can
be chosen by using the plot given above.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10
工商网监
湘ICP备2023018690号
