HMC992LP5E
v03.1013
Typical Applications
Features
The HMC992LP5E is ideal for:
Wide Gain Control Range: -10 to +38 dB
• Cellular/3G Infrastructure
High Output IP3: +40 dBm
• WiBro / WiMAX / 4G
Positive Analog Control: 0V to +5V
• Microwave Radio & VSAT
Configurable with 1 or 2 Attenuators
32 Lead 5x5 mm SMT Package: 25 mm2
• Test Equipment and Sensors
TE
• IF & RF Applications
General Description
Functional Diagram
LE
The HMC992LP5E is an IF analog controlled variable
gain amplifier composed of two identical voltage
variable attenuators in combination with an InGaP
HBT gain block MMIC amplifier which operates from
0.1 to 0.8 GHz, and can be controlled to provide
anywhere from -10 dB attenuation, to 40 dB of gain.
The HMC992LP5E delivers noise figure of 6 dB in
its maximum gain state, with output IP3 of up to
+40 dBm. The HMC992LP5E is housed in a RoHS
compliant 5x5 mm QFN leadless package, and requires no external matching components.
B
SO
AUTOMATIC GAIN CONTROL - SMT
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Electrical Specifications,
TA = +25° C, 50 Ohm System, Vdd = ATTN1Vdd = ATTN2Vdd = DETVDD = +5V [1]
O
Parameter
Min.
Typ.
1 Attenuator Operation
0.1 - 0.5 GHz
0.8 GHz
35
40
36
dB
dB
2 Attenuator Operation
0.1 - 0.3 GHz
0.5 GHz
0.8 GHz
32
38
36
33
dB
1 Attenuator Operation
0.1 - 0.5 GHz
0.8 GHz
25
20
dB
2 Attenuator Operation
0.1 - 0.5 GHz
0.8 GHz
48
42
dB
1 Attenuator Operation
0.1 - 0.5 GHz
0.8 GHz
15
12
dB
2 Attenuator Operation
0.1 - 0.8 GHz
12
dB
1 Attenuator Operation
0.1 GHz
0.3 - 0.5 GHz
0.8 GHz
11
12
14
dB
2 Attenuator Operation
0.1 - 0.8 GHz
12
dB
Gain (VCTRL = 0V)
Gain Control Range
Input Return Loss (VCTRL = 0V)
Output Return Loss (VCTRL = 0V)
1
Frequency
Max.
Units
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Electrical Specifications (continued),
TA = +25° C, 50 Ohm System, Vdd = ATTN1Vdd = ATTN2Vdd = DETVDD = +5V [1]
Frequency
Min.
Typ.
Max.
Units
0.1 GHz
0.3 GHz
0.5 GHz
0.8 GHz
42
44
39
35
dBm
dBm
Output Power for 1dB Compression (VCTRL = 0V)
0.1 GHz
0.3 GHz
0.5 GHz
0.8 GHz
18.5
18.9
19
18.8
dBm
dBm
TE
Output Third Order Intercept Point
(Two-Tone Output Power= 0 dBm Each Tone) (VCTRL = 0V)
Noise Figure (VCTRL = 0V)
Supply Current (Idd)
Power Detector
Input Frequency
DETOUT Slope
DETOUT Intercept
Variation of DETOUT with
Temperature from -40°C to +85°C @20dBm Input
dB
mA
Typ.
Typ.
Typ.
Units
100
500
900
MHz
61
61
62
dB
LE
±3 dB Dynamic Range
6
215
17.2
17.2
17.1
mV/dB
-68.1
-68.6
-68.9
dBm
-1.3
-1.2
-1.2
dB
O
B
SO
[1] Unless otherwise noted, test conditions: ATTN1 + ATTN2 + AMP1 + AMP2 in cascade.
AUTOMATIC GAIN CONTROL - SMT
Parameter
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Gain vs. VCTRL @ 100MHz[1]
Gain vs. VCTRL @ 100MHz[2]
40
30
30
20
GAIN (dB)
35
25
20
15
10
TE
0
10
+25C
+85C
-40C
5
+25C
+85C
-40C
-10
-20
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0
5
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
VCTRL (V)
LE
VCTRL (V)
Gain vs. VCTRL @ 300MHz[1]
Gain vs. VCTRL @ 300MHz[2]
45
40
40
30
35
25
20
15
10
B
SO
30
GAIN (dB)
GAIN (dB)
40
GAIN (dB)
AUTOMATIC GAIN CONTROL - SMT
45
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
10
0
+25C
+85C
-40C
5
20
+25C
+85C
-40C
-10
-20
0
5
0.5
1
1.5
2
VCTRL (V)
Gain vs. VCTRL @ 500MHz[1]
2.5
3
3.5
4
4.5
5
3.5
4
4.5
5
VCTRL (V)
O
Gain vs. VCTRL @ 500MHz[2]
45
40
40
30
35
GAIN (dB)
GAIN (dB)
30
25
20
15
20
10
0
10
+25C
+85C
-40C
5
+25C
+85C
-40C
-10
-20
0
0
0.5
1
1.5
2
2.5
3
3.5
VCTRL (V)
4
4.5
5
0
0.5
1
1.5
2
2.5
3
VCTRL (V)
[1] ATTN1 + AMP1 + AMP2, CT1=0V
[2] ATTN1 + ATTN2 + AMP1 + AMP2, CT1=0V
3
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Gain vs. VCTRL @ 800MHz[1]
Gain vs. VCTRL @ 800MHz[2]
45
30
20
GAIN (dB)
30
25
20
15
TE
+25C
+85C
-40C
5
+25C
+85C
-40C
-10
-20
0
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
0
5
VCTRL (V)
0V-0.1V
40
1
1.5
2.5
3
3.5
4
4.5
5
Gain vs. Frequency over VCTRL[2][3]
50
0V-0.1V
40
35
1.5V
30
2V
25
B
SO
30
2.5V
20
15
3V
5
0
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.5V
20
2V
10
2.5V
0
4V-5V
10
4V-5V
-20
1
O
Input Return Loss vs. VCTRL @ 100MHz[1]
0
0.1
0.2
0.3
0
-5
INPUT RETURN LOSS (dB)
-15
-20
-25
-30
-35
-40
0.6
0.7
0.8
0.9
1
-10
-15
-20
-25
-30
-35
+25C
+85C
-40C
-40
-45
0.5
Input Return Loss vs. VCTRL @ 100MHz[2]
-5
+25C
+85C
-40C
0.4
FREQUENCY (GHz)
0
-10
3V
-10
FREQUENCY (GHz)
INPUT RETURN LOSS (dB)
2
LE
45
0.5
VCTRL (V)
Gain vs. Frequency over VCTRL[1][3]
GAIN (dB)
10
0
10
GAIN (dB)
GAIN (dB)
35
AUTOMATIC GAIN CONTROL - SMT
40
40
-45
0
0.5
1
1.5
2
2.5
3
3.5
VCTRL (V)
4
4.5
5
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
VCTRL (V)
[1] ATTN1 + AMP1 + AMP2, CT1=0V
[2] ATTN1 + ATTN2 + AMP1 + AMP2, CT1=0V
[3] At 25°C
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
0
-5
INPUT RETURN LOSS (dB)
0
-10
-15
-20
-25
-35
-10
-15
-20
-25
-30
TE
-30
+25C
+85C
-40C
-35
+25C
+85C
-40C
-40
-45
-45
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0
VCTRL (V)
0.5
1
1.5
2
3
3.5
4
4.5
5
LE
Input Return Loss vs. VCTRL @ 500MHz[1]
0
Input Return Loss vs. VCTRL @ 500MHz[2]
0
-5
-5
-10
-20
-25
-30
-35
B
SO
-15
+25C
+85C
-40C
-40
-45
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
-10
-15
-20
-25
-30
-35
+25C
+85C
-40C
-40
-45
5
0
0.5
1
1.5
2
VCTRL (V)
O
Input Return Loss vs. VCTRL @ 800MHz[1]
3.5
4
4.5
5
Input Return Loss vs. VCTRL @ 800MHz[2]
-5
INPUT RETURN LOSS (dB)
-5
-15
-20
-25
-30
+25C
+85C
-40C
-40
3
0
-10
-35
2.5
VCTRL (V)
0
INPUT RETURN LOSS (dB)
2.5
VCTRL (V)
INPUT RETURN LOSS (dB)
INPUT RETURN LOSS (dB)
Input Return Loss vs. VCTRL @ 300MHz[2]
-5
-40
INPUT RETURN LOSS (dB)
AUTOMATIC GAIN CONTROL - SMT
Input Return Loss vs. VCTRL @ 300MHz[1]
-10
-15
-20
-25
-30
-35
+25C
+85C
-40C
-40
-45
-45
0
0.5
1
1.5
2
2.5
3
3.5
VCTRL (V)
4
4.5
5
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
VCTRL (V)
[1] ATTN1 + AMP1 + AMP2, CT1=0V
[2] ATTN1 + ATTN2 + AMP1 + AMP2 , CT1=0V
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Output Return Loss vs. VCTRL
@ 100MHz[1]
Output Return Loss vs. VCTRL
@ 100MHz[2]
OUTPUT RETURN LOSS (dB)
-4
-6
-8
-10
-12
-16
-18
-6
-8
-10
-12
-14
-16
-18
-20
-20
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0
VCTRL (V)
0.5
1
1.5
2
3
3.5
4
4.5
5
LE
Output Return Loss vs. VCTRL
@ 300MHz[2]
0
0
-2
+25C
+85C
-40C
-4
-8
-10
-12
-14
-16
-20
0
B
SO
-6
-18
0.5
1
1.5
2
2.5
3
3.5
4
4.5
-2
+25C
+85C
-40C
-4
-6
-8
-10
-12
-14
-16
-18
-20
5
0
0.5
1
1.5
2
VCTRL (V)
2.5
3
3.5
4
4.5
5
VCTRL (V)
Output Return Loss vs. VCTRL
@ 500MHz[2]
O
Output Return Loss vs. VCTRL
@ 500MHz[1]
0
0
-2
-2
+25C
+85C
-40C
-4
OUTPUT RETURN LOSS (dB)
OUTPUT RETURN LOSS (dB)
2.5
VCTRL (V)
Output Return Loss vs. VCTRL
@ 300MHz[1]
OUTPUT RETURN LOSS (dB)
+25C
+85C
-40C
-4
TE
-14
-2
AUTOMATIC GAIN CONTROL - SMT
0
+25C
+85C
-40C
OUTPUT RETURN LOSS (dB)
OUTPUT RETURN LOSS (dB)
0
-2
-6
-8
-10
-12
-14
-16
-18
+25C
+85C
-40C
-4
-6
-8
-10
-12
-14
-16
-18
-20
-20
0
0.5
1
1.5
2
2.5
3
3.5
VCTRL (V)
4
4.5
5
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
VCTRL (V)
[1] ATTN1 + AMP1 + AMP2, CT1=0V
[2] ATTN1 + ATTN2 + AMP1 + AMP2 , CT1=0V
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
0
0
-2
-2
OUTPUT RETURN LOSS (dB)
+25C
+85C
-40C
-4
-6
-8
-10
-12
+25C
+85C
-40C
-4
-6
-8
-10
-12
-14
TE
-14
-16
-16
-18
-20
-20
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
0
VCTRL (V)
0.5
1
1.5
2
3
3.5
4
4.5
5
LE
Output IP3 vs. VCTRL @ 100MHz [1]
50
Output IP3 vs. VCTRL @ 300MHz [1]
50
48
48
+25C
+85C
-40C
46
44
46
40
38
34
32
30
0
B
SO
44
42
36
0.5
1
1.5
2
2.5
3
3.5
4
4.5
42
40
38
36
+25C
+85C
-40C
34
32
30
5
0
0.5
1
1.5
2
VCTRL (V)
Output IP3 vs. VCTRL @ 500MHz [1]
2.5
3
3.5
4
4.5
5
VCTRL (V)
Output IP3 vs. VCTRL @ 800MHz [1]
O
44
44
42
42
40
40
OIP3 (dBm)
OIP3 (dBm)
2.5
VCTRL (V)
OIP3 (dBm)
OUTPUT RETURN LOSS (dB)
Output Return Loss vs. VCTRL
@ 800MHz[2]
-18
OIP3 (dBm)
AUTOMATIC GAIN CONTROL - SMT
Output Return Loss vs. VCTRL
@ 800MHz[1]
38
36
34
+25C
+85C
-40C
38
36
34
+25C
+85C
-40C
32
32
30
30
0
0.5
1
1.5
2
2.5
3
3.5
VCTRL (V)
4
4.5
5
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
VCTRL (V)
[1] ATTN1 + AMP1 + AMP2, CT1=0V
[2] ATTN1 + ATTN2 + AMP1 + AMP2 , CT1=0V
7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Output IP2 vs. Frequency over VCTRL [1] [2]
Output IP2 vs. Frequency over
Temperature [1] [3]
70
60
55
50
TE
0.2
0.3
0.4
0.5
0.6
0.7
40
0.1
0.8
0.6
0.7
0.8
0.7
0.8
Input IP3 vs. Frequency over
Temperature [1][3][5]
VCTL=0V
VCTL=1V
VCTL=2V
0.2
0.3
IIP3 (dBm)
B
SO
IIP3 (dBm)
0.5
5
20
0.5
0.6
0.7
-5
+25C
+85C
-40C
-10
VCTL=3V
VCTL=4V
VCTL=5V
0.4
0
-15
0.1
0.8
0.2
0.3
FREQUENCY (GHz)
0.4
0.5
0.6
FREQUENCY (GHz)
Noise Figure vs. Frequency over
Temperature [1] [3]
O
Output P1dB vs. Frequency over
Temperature [1] [4]
19.2
12
+25C
+85C
-40C
10
19
OP1dB (dBm)
8
NF (dB)
18.8
18.6
6
4
+25C
+85C
-40C
18.4
18.2
0.1
0.4
10
30
-20
0.1
0.3
LE
40
-10
0.2
FREQUENCY (GHz)
Input IP3 vs. Frequency over VCTRL [1][2][5]
0
55
45
FREQUENCY (GHz)
10
60
50
45
40
0.1
+25C
+85C
-40C
65
OIP2 (dBm)
OIP2 (dBm)
65
AUTOMATIC GAIN CONTROL - SMT
70
VCTL=0V
VCTL=1V
VCTL=2V
VCTL=3V
VCTL=4V
VCTL=5V
0.2
0.3
2
0.4
0.5
0.6
FREQUENCY (GHz)
[1] ATTN1 + AMP1 + AMP2
[3] VCTRL= 0V
[5] CT1=0V
0.7
0.8
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
FREQUENCY (GHz)
[2] At 25°C
[4] VCTRL= 4V
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
+5.6 V
Continuous Pdiss (T=85 °C)
Derate 78.88 mW/°C above 85 °C
3.16 W
VCTRL
-0.6V to VDD+0.6V
Thermal Resistance (Rth)
(junction to package bottom)
12.68°C/W
ATTN1IN, ATTN2IN Input Power
+20 dBm
Storage Temperature
-65 to +150 °C
AMP1IN RF Input Power
+10 dBm
Operating Temperature
-40 to +85 °C
AMP2IN RF Input Power
+15 dBm
ESD Sensitivity (HBM)
Class 1B
DETOUT Output Current
5 mA
DETIN RF Iput Power
12 dBm
Junction Temperature
125°C
TE
VDD, DETVDD, DETEN,
DETSET,DETRSSI, AMP1OUT,
AMP2OUT
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
LE
Outline Drawing
B
SO
AUTOMATIC GAIN CONTROL - SMT
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED.
O
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, WHITE INK, OR LASER MARK LOCATED APPROX. AS SHOWN.
7. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.25mm MAX.
8. PACKAGE WARP SHALL NOT EXCEED 0.05mm
9. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
10. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
HMC992LP5E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
H992
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
9
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Pin Descriptions
Description
Interface Schematic
1, 3, 5-6, 28, 30
ACG1, ACG4,
ACG5, ACG6,
ACG3, ACG2
AC ground capacitance connection pin.
2, 29
ATTN2OUT,
ATTN1OUT
These ports are matched to 50 Ohms.
Blocking capacitor is required.
4, 9, 31
VDD
Power supply for the attenuator. External by pass
capacitors are required. See application circuit.
7, 32
ATTN2IN,
ATTN1IN
These ports are matched to 50 Ohms.
Blocking capacitor is required.
LE
B
SO
VCTRL
Attenuation control voltage for the attenuator.
0V for minimum attenuation, 5V for maximum attenuation.
10, 11, 26
N/C
No connection required. These pins may be connected to
RF ground without affecting performance.
12
CT1
Reserved pin and should be connected to ground.
O
8
13
DETOUT
AUTOMATIC GAIN CONTROL - SMT
Function
TE
Pin Number
Logarithmic output that converts the input power to a DC
level in controller mode. Output voltage increases with
increasing amplitude.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
10
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Function
Description
Interface Schematic
14
DETVDD
Power supply for the attenuator. External by pass
capacitors are required. See application circuit.
15, 17, 22, 24
GND
These pins must be connected to RF ground.
16
DETIN
Detector RF input pin.
18
DETEN
Enable pin.
Apply VEN > 0.8xVcc for normal operation.
Apply VEN < 0.2xVcc to disable the detector.
19
DETSET
Set point input for controller mode.
Connect to DETOUT with the resistor network shown in
evaluation board drawing for detector mode.
B
SO
LE
TE
Pin Number
O
AUTOMATIC GAIN CONTROL - SMT
Pin Descriptions (continued)
11
20
DETRSSI
Connection for ground referenced external lowpass filter
capacitor.
21, 25
AMP2OUT,
AMP1OUT
These ports are mathed to 50 Ohms. External Choke
inductor and DC blocking capacitor are required.
See application circuit.
23, 27
AMP2IN,
AMP1IN
These ports are matched to 50 Ohms.
Blocking capacitor is required.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
AUTOMATIC GAIN CONTROL - SMT
O
B
SO
LE
TE
Application Circuit
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
12
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
J3
RFOUT3
C13
C22 L1
L2
LE
C10
C25
C24
R1 R2
R3
R6
GND
J7
R14
R13
VSET
DETOUT
C30
R8
RFDETIN
R10 J6
R11
R18 C27
R5
C18
R4
C16
C17
C5
C6
C19
R9
GND
VCTRL
J5
C11
B
SO
VDD
C3
C14
C15
C4
RSSI
DETEN
R25
J1
C2 C20
C21
C7
C8
C9
+
RFIN2
J4
C29
J2
TE
RFOUT1
RFIN1
RFOUT2
AUTOMATIC GAIN CONTROL - SMT
Evaluation PCB
R15
600-00117-00-3
List of Materials for Evaluation PCB EVAL01-HMC992LP5E[1]
Item
J1-J6
SMA Connector
DC Connector Header
O
J7
Description
C2-C10, C22, C24
13
1 nF Capacitor, 0402 Pkg.
C11, C14,C17,C19,
C21,C25
100 pF Capacitor, 0402 Pkg.
C13
33 µF Capacitor, Tantalum
C15-C16, C18, C20,
C27, C29
0.1 µF Capacitor, 0402 Pkg.
C30
1 µF Capacitor, 0603 Pkg.
L1
110 nH Inductor, 0603 Pkg.
L2
820 nH Inductor, 0603 Pkg.
R1-R6, R9-R10,
R13, R18
0 Ohm Resistor, 0402 Pkg.
R8
51 Ohms Resistor, 0402 Pkg.
R11, R15
10 kOhms Resistor, 0402 Pkg.
R14
1 kOhms Resistor, 0402 Pkg.
R25
240 Ohms Resistor, 0402 Pkg.
Item
Description
U1
HMC992LP5E
IF-Automatic Gain Controller
PCB [2]
600-00117-00 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Application Information
TE
The HMC992LP5E is a complete high performance Automatic Gain Control (AGC) solution, housing a Variable Gain
Amplifier (VGA) core and a control core in a single package. Its unique VVA technology provides constant OIP3 over
the entire control voltage range. The HMC992LP5E greatly simplifies the design of gain control loops by increasing
the integration level and reducing the number of required circuit elements. The VGA core of the HMC992LP5E is
composed of two identical voltage variable attenuators followed by two gain block amplifiers which operate from 10
to 800 MHz. The HMC992LP5E’s control core features a high accuracy log detector. As shown in the functional block
diagram, the HMC992LP5E combines all of these cores in a highly compact 5 x 5 mm plastic package, and offers an
easy-to-use, temperature stable AGC solution.
LE
The HMC992LP5’s VGA core has a flexible structure where a single attenuator (23dB) or two attenuators (46dB) can
be used depending upon the dynamic range requirement. The HMC992LP5E is designed to operate in a 50 Ohms
impedance system. Inputs and outputs of the HMC992LP5E’s attenuators and amplifiers (ATTIN1, ATTOUT1, ATTIN2,
ATTOUT2, AMPIN1, AMPOUT1, AMPIN2, AMPOUT2) are broadband matched to 50 Ohms single-ended and require
only external DC blocking capacitors over the entire frequency band of operation. The input of the HMC992LP5E’s
built in log detector (RFDETIN) is also broadband matched to 50 Ohms with a single-ended input interface and does
not require any matching components.
O
B
SO
The HMC992LP5E requires a single 5V supply with adequate power supply decoupling as recommended in the application schematic.
AUTOMATIC GAIN CONTROL - SMT
Introduction
Figure 1a: The HMC992LP5E’s VGA configuration with 1 attenuator.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
14
HMC992LP5E
v03.1013
TE
LE
B
SO
AUTOMATIC GAIN CONTROL - SMT
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
Figure 1b: The HMC992LP5E’s VGA configuration with 2 attenuators.
O
VGA Operation
The HMC992LP5E’s VGA core can be configured with one or two variable attenuators followed by two fixed gain
amplifiers for different control ranges as shown in Figure 1a and Figure 1b (basic connections are not shown). The
blocks require only external DC blocking capacitors at their inputs and outputs for interconnections. Note that the link
between VCTRL and DETOUT pins must be broken for correct VGA Operation. The VCTRL pin should be used to set
the attenuation of the HMC992LP5E.
Gain Control Interface VCTRL
The VCTRL pin is the gain control pin common to both of HMC992LP5E’s identical voltage variable attenuators. The
VCTRL gain control voltage ranges between 1V and 4V. A VCTRL control voltage of 1V provides the lowest attenuation,
while 4V provides the highest attenuation.
Figure 2 represents the VGA operation of HMC992LP5E with two attenuators and two amplifiers for different gain control
voltages applied to the VCTRL pin. The output power increases linearly with the input power until the power saturation is
reached when the VCTRL voltage is constant. The useable input power range of such a system is limited by the saturation level of the final stage amplifier. So the input power level required for power saturation and the dynamic range of the
15
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
VCTRL=1 V
VCTRL=2 V
VCTRL=3 V
VCTRL=4 V
10
0
-10
-20
-40
-70
-60
-50
-40
-30
TE
-30
-20
-10
0
10
INPUT POWER (dBm)
Figure 2: Pout vs. Pin at 100 MHz, 1 attenuator
LE
HMC992LP5E’s VGA is defined by the value of the gain control voltage applied to the VCTRL pin. Refer to the Figure 2
for the useable input power range at different VCTRL levels.
When VCTRL=1V, the gain of HMC992LP5E’s VGA with 2 attenuators is 39 dB at 100 MHz. The input power required for
1 dB compression point at the output is given by: Pin1dB = Pout1dB – Gain (dB) = 18 – 39 = -21 dB.
When VCTRL=2V, the gain of the HMC992LP5E’s VGA with 2 attenuators is 25 dB at 100 MHz. The input power required
for 1 dB compression point at the output is given by: Pin1dB = Pout1dB – Gain (dB) = 18 – 25 = -7 dB.
B
SO
Therefore, increasing the VCTRL pin voltage reduces the gain of the HMC992LP5E’s VGA and increases input power
level required for power saturation. When the input signal is weak, the attenuation level of the variable attenuators
should be reduced. When the input signal is large; the attenuation level of the variable attenuators should be increased
to achieve a constant output level.
Equation (1a)
Gain (dB) = 61.0 – 18.2 x VCTRL with two attenuators
Equation (1b)
The gain control performance of the HMC992LP5E at 300 MHz is shown in Figures 3a and 3b. The HMC992LP5E
provides 24 dB of gain control range with a maximum gain of 41.2 dB when it is configured in 1 attenuator + 2 amplifiers mode, and similarly a 48 dB of gain control range with a maximum gain of 39 dB of gain when it is configured in 2
attenuators + 2 amplifiers mode. The HMC992LP5E’s VGA has a very flat linear-in-dB gain control characteristic with a
slope of -18.2 dB/V for the 2 attenuator configuration and -9.1 dB/V for the 1 attenuator configuration. The log-linearity
error of the HMC992LP5 VGA is typically less than ± 1dB over the entire gain control range as shown in Figure 3a and
Figure 3b. The relation between the gain of HMC992LP5E’s VGA and VCTRL pin voltage can be approximated as given
in Equation (1).
Gain (dB) = 52.5 – 9.1 x VCTRL with one attenuator
O
45
3
40
2
Error
35
1
30
0
25
-1
Ideal
Gain
20
ERROR (dB)
GAIN (dB)
AUTOMATIC GAIN CONTROL - SMT
OUTPUT POWER (dBm)
20
-2
15
-3
1
1.5
2
2.5
3
3.5
4
VCTRL (V)
Figure 3a: Gain & Gain Conformance Error vs. VCTRL at 300 MHz, 1 attenuator + 2 amplifiers configuration.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
16
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
3
2
Error
20
1
10
0
0
-1
Ideal
Gain
-10
TE
GAIN (dB)
30
ERROR (dB)
-2
-20
-3
1
1.5
2
2.5
VCTRL (V)
3
3.5
4
LE
Figure 3b: Gain & Gain Conformance Error vs. VCTRL at 300 MHz, 2 attenuators + 2 amplifiers configuration.
Noise and Distortion
As with any multistage VGA consisting of voltage variable attenuators and gain blocks, the noise figure (NF) and input
referred distortion (IIP3) characteristics of the HMC992LP5E’s VGA are dependent on the gain control voltage VCTRL.
When the attenuation level of the variable attenuators is set to minimum (maximum gain state), the noise figure of the
HMC992LP5E’s VGA is minimized; however the IIP3 is degraded to minimum as well. The noise figure and IIP3 of the
HMC992LP5E’s VGA increases with the attenuation level of the variable attenuators.
B
SO
AUTOMATIC GAIN CONTROL - SMT
40
For low attenuation levels, the noise contribution from the VGA is important since the input signal is weak. For high attenuation levels of the variable attenuators, the noise contribution from the VGA is less important and the noise requirement
of the VGA is relaxed since the input signal is high. The noise figure performance of the HMC992LP5E’s VGA at 300
MHz is shown in Figure 4. The HMC992LP5E’s VGA delivers a noise figure of 6 dB in its maximum gain state when it is
configured in 1 attenuator + 2 amplifiers mode.
50
50
40
40
OIP3
30
30
Noise Figure
Gain
20
20
10
OIP3 (dBm)
NOISE FIGURE, GAIN (dB)
O
For low attenuation levels of the variable attenuators, IIP3 is less important since high gain of whole VGA improves distortion performance at its output (OIP3). For high attenuation levels of the variable attenuators, IIP3 is more important
because of low gain of whole VGA. The distortion performance of the HMC992LP5E’s VGA at 300 MHz is shown in
Figure 4. The HMC992LP5E’s VGA provides an almost constant OIP3 of up to +44 dBm in any state when it is configured in one attenuator and two amplifiers mode.
10
0
0
1
1.5
2
2.5
3
3.5
4
VCTRL (V)
Figure 4: Noise Figure & Gain & OIP3 vs. VCTRL at 300 MHz, 1 attenuator.
17
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
B
SO
LE
TE
The HMC992LP5E can be configured as an AGC amplifier by using VGA core and the built in log detector. An example
for AGC amplifier configuration of the HMC992LP5E is depicted in below figure.
AUTOMATIC GAIN CONTROL - SMT
AGC Operation
O
Figure 5: The HMC992LP5E’s AGC configuration with 2 attenuators.
In AGC amplifier configuration, the input signal is amplified by the HMC992LP5E’s VGA. The output of the HMC992LP5E’s
VGA core is fed back to the input of the HMC992LP5E’s log detector (RFDETIN) through an external coupler or attenuator to drop the maximum and minimum output level of the HMC992LP5E’s VGA to within the dynamic range of the
HMC992LP5E’s log detector. The HMC992LP5E’s log detector produces a voltage at the output of the log detector
(DETOUT) proportional to the output power level of the HMC992LP5E’s VGA. The high impedance output pin DETOUT
is connected to the gain control pin VCTRL of VGA to form the AGC loop. The VSET pin is the constant output power set
point of the AGC amplifier. As a result of negative feedback, the gain of the VGA is automatically adjusted to maintain a
constant signal power level at the output of AGC amplifier. The output signal power level is determined by the AGC set
point VSET, regardless of the input signal variation.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
18
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
In closed loop AGC operation the output power level of the HMC992LP5E is controlled by the VSET pin. An input voltage between 0.2V and 1.2V should be applied to the VSET input pin to control the output power level. The VSET vs.
the output power characteristic is shown in Figure 6a and Figure 6b for different input power levels and different coupler
ratios used. The slope of the gain vs. VSET characteristic is 57dB/V and it is independent of the coupler ratio used.
TE
In closed loop operation the HMC992LP5E is able to automatically adjust the RF gain over a gain adjustment range
of up to 46 dB at 100 MHz. The HMC992LP5E’s output dynamic range is a function of both input power level and the
coupler ratio used to close the AGC loop. The combined effect of the input power and coupler ratio on the output power
dynamic range is presented in Figures 6a and 6b.
LE
For high input power levels, the maximum level of output dynamic range is limited by the Psat of the VGA or the highest detectable power level by the log detector. To eliminate any limitations that can arise due to highest detectable log
detector, a high enough coupler ratio should be chosen to translate the maximum VGA output power level to a value
lower than the highest detectable log detector power level.
30
OUTPUT POWER (dBm)
20
Input Power = -25 dBm
Input Power = -20 dBm
Input Power = -15 dBm
10
B
SO
AUTOMATIC GAIN CONTROL - SMT
AGC Set point Interface VSET
0
-10
20 dB coupler is used
-20
-30
-40
0.2
0.4
0.6
0.8
1
1.2
VSET (V)
30
20
OUTPUT POWER (dBm)
O
Figure 6a: Output Power vs. VSET over Input Power, 2 attenuators @ 300 MHz.
Coupler= -10 dBm
Coupler= -20 dBm
Coupler= -30 dBm
10
0
-10
Input Power = -20 dBm
-20
-30
-40
0.2
0.4
0.6
0.8
1
1.2
VSET (V)
Figure 6b: Output Power vs. VSET over coupler ratio, 2 attenuators @ 300 MHz.
19
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
Similarly, the lower side of the dynamic range is limited by the noise floor of the VGA or the lowest power level detectable by the log detector. To eliminate any limitations on the lower side of the dynamic range, the coupler ratio should be
low enough to translate the minimum VGA output power level to a value higher than the lowest detectable log detector
power level.
Please also refer to the Log Detector section for more information.
TE
Figure 7a shows the output power vs. input power transfer characteristic of the HMC992LP5E over different VSET
voltages for a closed AGC loop configuration. For low and high input power levels the HMC992LP5E attenuation rage
is saturated and the output is a linear function of the input. For input power levels within the dynamic range, the
HMC992LP5E automatically adjusts the attenuation level as shown in Figure 7c to maintain a constant output power
level. When Vset=0.6 V, the output power level is set to -13 dBm and the HMC992LP5E’s AGC amplifier provides a gain
control range of 46 dB from -51 dBm to -5 dBm with an excellent ripple within 0.06 dB.
10
-10
-20
-30
-40
-70
B
SO
OUTPUT POWER (dBm)
0
VSET=0.4V
VSET=0.6V
VSET=0.8V
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
-10
20 dB coupler is used
-12
-14
-16
+25C
+85C
-40C
-18
-20
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Figure 7b: Output Power vs. input power, 2 attenuators @ 400 MHz & VSET=0.6V
5
4
DETOUT (V)
O
Figure 7a: Output Power vs. input power over VSET,
2 attenuators @ 300 MHz.
OUTPUT POWER (dBm)
LE
-8
20 dB coupler is used
AUTOMATIC GAIN CONTROL - SMT
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
20 dB coupler is used
3
2
1
0
-70
VSET= 0.4V
VSET= 0.6V
VSET= 0.8V
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Figure 7c: DETOUT vs. input power over VSET, 2 attenuators @ 300 MHz.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
20
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
TE
The logarithmic detector of the HMC992LP5E converts the average envelope of RF input power to a proportional DC
voltage at its output (DETOUT), as shown in Figure 8. In detection mode, the DETOUT pin should be connected to
the VSET input. The HMC992LP5E’s logarithmic detector employs a successive compression technology which delivers 50 dB of dynamic range (±1dB) with high conversion accuracy over a wide input frequency range. Note that the
link between DETOUT and VCTRL pins must broken and DETOUT must connected to VSET via 1k Ohms resistor for
LOGAMP operation.
The HMC992LP5E’s logarithmic detector can be used in the controller mode where an external voltage is applied to the
VSET pin to create an AGC loop. The linear-in-dB behavior of the HMC992LP5E’s VGA and logarithmic detector creates
a linear AGC system. For linear operation, the signal fluctuations at the input of the log detector should remain within
the dynamic range of the log detector. In closed loop AGC operation, the HMC992LP5E’s response to large input level
changes is not slew-rate limited, and the speed of the transient response can be adjusted through loop filter capacitors
C28 and C30 (see Figure 5).
LE
To achieve maximum gain adjustment range of the HMC992LP5E, the coupler ratio should be chosen based on the
output power desired. A coupler ratio which translates the output power to the center (-25dBm) of the usable dynamic
range of the log detector should be chosen. The gain adjustment range of the HMC992L5E is maximized in this configuration. If the linear operation range of the HMC992LP5E is maximized by selecting the appropriate coupler ratio, the
HMC992LP5E can handle larger changes in input level. For example, an input voltage of 0.6 V is applied to the Vset
pin to set the constant output power level to -13 dBm. A coupler ratio of ~12 dB can be chosen to provide a maximum
dynamic range of 46 dBm.
B
SO
AUTOMATIC GAIN CONTROL - SMT
Log Detector
1.5
100 MHz
300 MHz
500 MHz
800 MHz
DETOUT (V)
O
1.2
0.9
0.6
0.3
0
-70
-60
-50
-40
-30
-20
-10
0
10
INPUT POWER (dBm)
Figure 8: DETOUT vs. input power over frequency.
21
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC992LP5E
v03.1013
IF AUTOMATIC GAIN CONTROLLER
(IF-AGC), 50 - 800 MHz
TE
The AGC system has a response time to undesired input level fluctuations. Response time and the stability of the
HMC992LP5E’s AGC loop is determined by C28 and C30 in the application schematic. The HMC992LP5E’s response
to voltage changes in VSET with C28=C30=1µF when the input level is kept constant is shown in Figure 9.
3.5
LE
VCTRL (V)
3
2.5
2
B
SO
1.5
Pin= -30 dBm
1
0
50
100
150
200
250
300
350
400
450
500
TIME (ms)
AUTOMATIC GAIN CONTROL - SMT
Loop Bandwidth and Response Time
O
Figure 9: HMC992LP5E’s gain control voltage when VSET is toggled between 0.4V - 0.8V and input level is kept
constant in closed loop.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
22
工商网监
湘ICP备2023018690号
