HMC1013LP4E
v02.0913
SDLVAs - SMT
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
Typical Applications
Features
The HMC1013LP4E is ideal for:
High Logging Range: 67 dB (-62 to +5 dBm)
• EW, ELINT & IFM Receivers
Output Frequency Flatness: ±2 dB
• DF Radar Systems
Log Linearity: ±2 dB
• ECM Systems
Fast Rise/Fall Times: 5/15 ns
• Broadband Test & Measurement
Single Positive Supply: +3.3V
• Power Measurement & Control Circuits
ESD Sensitivity (HBM): Class 1A
• Military & Space Applications
24 Lead 4x4mm SMT Package: 16mm2
Functional Diagram
General Description
The HMC1013LP4E is a Successive Detection Log
Video Amplifier which operates from 0.5 to 18.5 GHz.
The HMC1013LP4E provides a logging range of 67
dB. This device offers typical fast rise/fall times of
5/15 ns and a superior delay time of only 10 ns. The
HMC1013LP4E log video output slope is typically
15 mV/dB. Maximum recovery times are less than
40 ns. The HMC1013LP4E is available in a highly compact 4x4 mm SMT plastic package and is ideal for high
speed channelized receiver applications.
Electrical Specifications, TA = +25 °C Vcc1 = Vcc2 = Vcc3= +3.3V, EN=3.3V
Parameter
Conditions
Input Frequency Range [1]
Frequency Flatness
Log Linearity
Pin = -60 to +5 dBm
Log Linearity over Temperature
Typ.
Units
0.5 - 18.5
GHz
±2
dB
±2
dB
±2
dB
Minimum Logging Range
to ±3 dB error
-62
dBm
Maximum Logging Range
to ±3 dB error
+5
dBm
8
dB
Log Video Minimum Output Voltage
Input Return Loss
0.9
V
Log Video Maximum Output Voltage
1.9
V
Log Video Output Rise Time
10% to 90%
5
ns
Log Video Output Fall Time
90% to 10%
15
ns
@ 10 GHz
38
ns
15
mV/dB
6.2
µV/dB°C
10
ns
Log Video Recovery Time
Log Video Output Slope
Log Video Output Slope Variation over Temperature
Log Video Propagation Delay
@ 10 GHz
Supply Current (Icc1)
7
mA
Supply Current (Icc2)
90
mA
Supply Current (Icc3)
86
mA
[1] Video output load should be 1K Ohm or higher.
1
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1013LP4E
v02.0913
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
VIDEO OUT & Error
vs. Input Power, Fin = 500 MHz
8
6
10 GHz
14 GHz
18 GHz
1.6
0
-2
1
1.2
0
0.8
-6
0.6
-8
-70
0.4
-50
-40
-30
-20
-10
0
10
-70
20
-1
1
-4
-60
-4
-60
-50
4
1.8
2
1.6
1.2
0
-1
1
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
0.4
-60
-50
-40
-30
-20
-10
0
10
4
-1
1
-4
0.4
-70
3
1.8
2
1.6
1
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
0.4
-30
-20
-10
-3
-4
-60
-50
-40
-30
-20
-10
0
10
20
0
10
INPUT POWER (dBm)
20
4
ERR +25C
ERR +85C
ERR -40C
3
2
1.4
1
1.2
0
-1
1
-2
0.8
-3
0.6
-4
0.4
-70
ERROR (dB)
-1
VIDEO OUT (V)
2
ERROR (dB)
VIDEO OUT (V)
4
0
-40
-2
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
VIDEO OUT & Error
vs. Input Power, Fin = 10 GHz
1.2
-50
2
0
0.6
1
-60
3
1.2
0.8
1.4
-70
20
INPUT POWER (dBm)
ERR +25C
ERR +85C
ERR -40C
0.6
10
1
-3
20
2
0.8
0
1.4
-2
VIDEO OUT & Error
vs. Input Power, Fin = 6 GHz
1.6
-10
ERR +25C
ERR +85C
ERR -40C
INPUT POWER (dBm)
1.8
-20
ERROR (dB)
1
ERROR (dB)
VIDEO OUT (V)
3
1.4
-70
-30
2
VIDEO OUT (V)
ERR +25C
ERR +85C
ERR -40C
0.6
-40
VIDEO OUT & Error
vs. Input Power, Fin = 2 GHz
2
0.8
-3
INPUT POWER (dBm)
VIDEO OUT & Error
vs. Input Power, Fin = 1 GHz
1.6
-2
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
INPUT POWER (dBm)
1.8
2
1.4
ERROR (dB)
2
3
ERR +25C
ERR +85C
ERR -40C
1.8
VIDEO OUT (V)
4
ERROR (dB)
4
2
1 GHz
2 GHz
6 GHz
SDLVAs - SMT
Error Flatness vs.
Input Power Over Frequency [1] [2]
-2
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
-3
-4
-60
-50
-40
-30
-20
-10
0
10
20
INPUT POWER (dBm)
[1] An average ideal line is used to calculate error curves.
[2] At 25°C.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
2
HMC1013LP4E
v02.0913
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
VIDEO OUT & Error
vs. Input Power, Fin = 18 GHz
VIDEO OUT & Error
vs. Input Power, Fin = 14 GHz
3
1.8
2
1.6
1.4
1
1.2
0
0
-2
0.8
-3
0.6
-4
0.4
-70
-60
-50
-40
-30
-20
-10
0
10
2
1.2
0.8
0.4
3
1
-1
0.6
ERR +25C
ERR +85C
ERR -40C
1.4
1
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
4
-1
1
20
ERROR (dB)
VIDEO OUT (V)
1.6
2
VIDEO OUT (V)
ERR +25C
ERR +85C
ERR -40C
1.8
4
ERROR (dB)
SDLVAs - SMT
2
-2
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
-3
-4
-70
-60
-50
-40
INPUT POWER (dBm)
-30
-20
-10
0
10
20
INPUT POWER (dBm)
VIDEO OUT & Error
vs. Input Power, Fin = 20 GHz
4
2
ERR +25C
ERR +85C
ERR -40C
3
1.6
2
1.4
1
1.2
0
-1
1
-2
0.8
Ideal
Video Out +25C
Video Out +85C
Video Out -40C
0.6
-3
-4
0.4
-70
ERROR (dB)
VIDEO OUT (V)
1.8
-60
-50
-40
-30
-20
-10
0
10
20
INPUT POWER (dBm)
VIDEO OUT vs. Frequency
Over Input Power & Temperature
VIDEO OUT vs. Frequency
Over Input Power & Bias Voltage
1.8
1.8
1.7
1.7
-10 dBm
1.5
1.4
-25 dBm
1.3
1.2
+25C
+85C
-40C
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
3
1.5
1.4
-25 dBm
1.3
1.2
-40 dBm
1.1
1
-10 dBm
1.6
VIDEO OUT (V)
VIDEO OUT (V)
1.6
-40 dBm
3.45V
3.30V
3.15V
1.1
16
18
20
1
0
2
4
6
8
10
12
14
16
18
20
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1013LP4E
v02.0913
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
Rise Time for Various Frequencies
@ 0 dBm
Fall Time for Various Frequencies
@ 0 dBm
1.8
VIDEO OUT (V)
VIDEO OUT (V)
2
2 GHz
10 GHz
18 GHz
2
1.6
1.4
1.6
1.4
1.2
1.2
1
1
0.8
0
20
40
60
80
100
120
140
160
180
200
2 GHz
10 GHz
18 GHz
1.8
0.8
0
10
20
40
Absolute Maximum Ratings
Input Return Loss vs. Frequency
0
Vcc
+3.6V
Enable
+3.6V
RF Input Power
+13 dBm
-10
Junction Temperature
125 °C
-15
Continuous Pdiss (T=85 °C)
Derate 35.22 mW/°C above 85 °C
1.41 W
-20
Thermal Resistance (Rth)
(junction to package bottom)
28.4 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
ESD Sensitivity (HBM)
Class 1A
-5
-25
+25C
+85C
-40C
-30
0
2
4
6
8
10
12
50
TIME (ns)
TIME (ns)
INPUT RETURN LOSS (dB)
30
SDLVAs - SMT
2.2
2.2
14
16
18
20
FREQUENCY (GHz)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
4
HMC1013LP4E
v02.0913
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
SDLVAs - SMT
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON
IMPREGNATED.
2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.
3. LEAD AND GROUND PADDLE PLATING: 100% MATTE TIN
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
6. CHARACTERS TO BE HELVETICA MEDIUM, .025 HIGH, WHITE INK, OR LASER MARK LOCATED
APPROX. AS SHOWN.
7. PAD BURR LENGTH SHALL BE 0.15mm MAX. PAD BURR HEIGHT SHALL BE 0.05mm MAX.
8. PACKAGE WARP SHALL NOT EXCEED 0.05mm
9. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
10. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN
Package Information
Part Number
Package Body Material
Lead Finish
HMC1013LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL Rating
MSL1
[2]
Package Marking [1]
H1013
XXXX
[1] 4-Digit lot number XXXX
[2] Max peak reflow temperature of 260 °C
5
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1013LP4E
v02.0913
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
Pin Descriptions
Function
Description
1-2, 7, 9-10, 12-13,
16, 18-19, 21, 23
N/C
The pins are not connected internally; however, all data
shown herein was measured with these pins connected to
RF/DC ground externally.
3, 5-6, 8, 11
GND
These pins and the exposed package bottom must be
connected to a high quality RF/DC ground.
4
RFIN
RF Input pin
14, 15
VIDEO_FB
VIDEO_OUT
Video out and feedback. These pins should be shorted to
each other (see application circuit). Video out load should
be at least 1K Ohm or higher.
17
EN
Enable pin, connect to 3.3V supply for normal
operation. Total supply current reduced to less
than 11mA when EN is set to 0V.
20
VCC3
Interface Schematic
SDLVAs - SMT
Pin Number
Bias Supply. Connect supply voltage to
these pins with appropriate filtering. See application circuit
To ensure proper start-up supply rise time
should be faster than 100usec.
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
6
HMC1013LP4E
v02.0913
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
Pin Descriptions (continued)
SDLVAs - SMT
Pin Number
22, 24
Function
VCC2,
VCC1
Description
Interface Schematic
Bias Supply. Connect Supply Voltage to
these pins with appropriate filtering. Connect Vcc2
with Vcc1. See application circuit.
To ensure proper start-up supply rise time
should be faster than 100usec.
Application Circuit
Note: Video output load should be 1K Ohm or higher.
7
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
HMC1013LP4E
v02.0913
SUCCESSIVE DETECTION LOG VIDEO
AMPLIFIER (SDLVA), 0.5 - 18.5 GHz
SDLVAs - SMT
Evaluation PCB
List of Materials for Evaluation PCB EVAL01-HMC1013LP4E[1]
Item
Description
J1
K-Type Connector
J2
SMA Connector
J3 - J6
DC Pins
C2
47 pF Capacitor, 0402 Pkg.
C4
100 pF Capacitor, 0402 Pkg.
C5-C7
10 nF Capacitor, 0402 Pkg.
C8-C10
4.7 µF Capacitor, Tantalum.
R1-R4
0 Ohm Resistor, 0402 Pkg.
R5
120 Ohm Resistor, 0402 Pkg.
U1
HMC1013LP4E SDLVA
PCB [2]
126093 Evaluation PCB
The circuit board used in the application should
use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
N/C pins should also be connected to ground. The
evaluation circuit board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350 or Arlon 25 FR
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, 2delivery,
and to
placeChelmsford,
orders: Analog MA
Devices,
Inc.,
For price,
delivery
and
to place
orders:
Microwave
Corporation,
Elizabeth
Drive,
01824
responsibility
is assumed
by Analog
Devices
for its use,
nor for anyHittite
infringements
of patents or other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 978-250-3343
Fax: 978-250-3373 Phone:
Order781-329-4700
On-line at www.hittite.com
• Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Application
Support: Phone: 1-800-ANALOG-D
Trademarks and registered trademarks are
the property of their
respective owners.
Application
Support:
Phone: 978-250-3343
or apps@hittite.com
8
工商网监
湘ICP备2023018690号
